Author Options:

How do i calculate the size of a dish i need for a specif frequency, specifically around 95 mhz? Answered

How do i do so?
I plan on making a home made radio telescope, but i just want to block out non-space made noise.



8 years ago

AFAIK, dishes are not terribly tunable, its the LNB that does the selectivity.

Gain of a dish IS controlled by the wavelength I suppose, but not as highly tunably as a Yagi.

The gain of a Dish is proportional to D2/lambda2, so if D< lambda, it isn't a good thing.

95Mhz (3metres) is such a long wavelength, you'll struggle to get any great directionality with a dish , since, for a practical amateur dish, you're not going to have more than 2 waves or so of diameter.

For an amateur radio scope, a Yagi is a MUCH better design option.



8 years ago

The dish size is related to gain and beam width and therefore resolution not frequency.

I would also go with the high gain Yagi as a start. - When did you last see a "small" radio telescope unless made up of thousands of smaller dishes.