Search for 33 in Topics



33cc Gas GS Moon Scooter Help? Answered

Ok, I already posted a question about this. The problem was a mislabeled sticker. Now I have more problems. The problem this time is my dad just randomly came out and started adjusting the idle screws for high speed and idling. It will now not run. I am not sure if he adjusted anything else but I need a bit of help. The engine model number is 1E36F 2-stroke 33cc engine and this is a GS Moon scooter. It has a full tank of gas/oil mixture which is correctly mixed yesterday.

Question by Electric Spectre1    |  last reply


Help with 33cc Gas Scooter? Answered

I have a 33cc gas scooter (sounds nerdy, I know), on the side I can make out what looks like Moto Rebel but not sure. It was used twice, sat in garage for one year without gas in the tank, then sold to me for $20 (Amazing price for something that's $350 new). Like new! It is 2-stroke but am unsure of the model number. It starts runs on choke between a small margin but won't run on ON, which is above choke on the switch. I think it may need the idle screws adjusted but am unsure. Has new and correct gas oil mix in tank and has primer button. Help would be appreciated.

Question by Electric Spectre1    |  last reply



Students build 33 foot tall cardboard tower

This cardboard tower built by students for an exhibition in Paris is 33 feet tall and held together only by screws. It's made up of 96 pieces of cardboard and only took 9 hours to assemble. Even better, no scaffolding was needed as the staircase around it provided all the access the students needed. Cardboard Tower via treehugger

Topic by fungus amungus    |  last reply



The search function is absolutely terrible - or havent someone wokrd with Arduino 33 BLE sense?

I need an Arduino 33 BLE sense (in built microphone that can stream sound to an API.Perhaps via SIM5320E or SIM7600Anyone?Payment available.

Question by davzarek  


What can i use to produce a tone of 33 hertz?

I've heard that this is the tone that the infamous Blaster Beam from Craig Huxley plays at and stimulates some women. What can i use to either reproduce the effects of the Beam or just produce this tone?

Question by EragonShadeslayer    |  last reply



rewind Solenoid? Answered

Dear All .. My original solenoid winding by awg 30 magnet wire,  now I would like to  rewind new  with 2 x awg 33 So please help me to know : -The new (2x awg 33 )  they power as identical  as  1x awg 30  magnet wire? Thank you so much .

Question by lam.huuminh.3    |  last reply


What stylus do I use for a SC12M turntable cartridge?

I have this old Lloyds turntable from probably around the early 80's, late 70's. It's missing the needle, but on the side of the cartridge there is a serial number that says "SC12M". Could someone please help me out? Thanks, Josh1324

Question by josh1324    |  last reply


problems with the views count

Views don't seem to be updating... My latest instructable is stopped on 0 views, with 33 comments.

Topic by sam noyoun    |  last reply


Cen-Tech Thermometer to PC Hacking

I just got my new $30 Cen-Tech thermometer from Harbor Freight and it's begging to be hacked. I would love to be able to use this thermometer as part of a closed loop system to control a hot plate for soldering purposes. Just inside the battery compartment is a header with four pins. They nicely labeled the pins on the silk screen. I'm probing on "Gnd" and "Tx" pins. I used a MAX232 level shifter to convert the TTL output to RS232 so I could connect to my PC. I then ran the attached simply Python app that dumps the data packets to the console. Each packet has 25 characters and repeats at about 3Hz. My question is, how would one go about decoding the data packets? Some numbers seem constant while other move. I'm hoping the data format is obvious to someone. Note, the reading on the display was around 68.8 degrees F when this data was collected. The readings did jump plus/minus a few tenths while collecting. Any ideas? Thanks, Jim Console Output: 33 15 11 00 3A 07 9B 14 1B 1E 82 FF 15 07 A9 12 F7 01 CA 0B 97 0C 00 00 4A 33 15 11 00 3A 07 9B 14 1B 1E 82 FF 15 07 A9 12 F7 01 CA 0B 97 0C 00 00 4A 33 15 11 00 3A 07 9B 14 1B 1E 82 FF 15 07 A9 12 F7 01 CA 0B 97 0C 00 00 4A 33 15 10 00 3A 07 9B 14 1B 1E 81 FF 15 07 A9 12 F6 01 CA 0B 97 0C 00 00 47 33 15 10 00 3A 07 9B 14 1B 1E 81 FF 15 07 A9 12 F6 01 CA 0B 97 0C 00 00 47 33 15 11 00 3A 07 9B 14 1B 1E 82 FF 15 07 A9 12 F7 01 CA 0B 97 0C 00 00 4A 33 15 11 00 3A 07 9B 14 1B 1E 82 FF 15 07 A9 12 F7 01 CA 0B 97 0C 00 00 4A 33 15 12 00 3A 07 9B 14 1B 1E 84 FF 15 07 A9 12 F8 01 CA 0B 97 0C 00 00 4E 33 15 13 00 3A 07 9B 14 1B 1E 85 FF 15 07 A9 12 F9 01 CA 0B 97 0C 00 00 51 33 15 11 00 3A 07 8F 14 1B 1E 82 FF 15 07 9E 12 F7 01 CA 0B 9C 0C 00 00 38 33 15 11 00 3A 07 8F 14 1B 1E 82 FF 15 07 9E 12 F7 01 CA 0B 9C 0C 00 00 38 33 15 11 00 3A 07 8F 14 1B 1E 82 FF 15 07 9E 12 F7 01 CA 0B 9C 0C 00 00 38 33 15 09 00 51 07 63 17 65 1D 81 FF 2C 07 2D 15 F1 01 00 0C 92 0B 00 00 35 33 15 0B 00 51 07 63 17 65 1D 84 FF 2C 07 2D 15 F3 01 00 0C 92 0B 00 00 3C 33 15 0A 00 51 07 63 17 65 1D 82 FF 2C 07 2D 15 F2 01 00 0C 92 0B 00 00 38 33 15 0A 00 51 07 63 17 65 1D 82 FF 2C 07 2D 15 F2 01 00 0C 92 0B 00 00 38 33 15 0A 00 51 07 63 17 65 1D 82 FF 2C 07 2D 15 F2 01 00 0C 92 0B 00 00 38 33 15 0A 00 51 07 63 17 65 1D 82 FF 2C 07 2D 15 F2 01 00 0C 92 0B 00 00 38 33 15 0A 00 51 07 63 17 65 1D 82 FF 2C 07 2D 15 F2 01 00 0C 92 0B 00 00 38 33 15 0A 00 51 07 63 17 65 1D 82 FF 2C 07 2D 15 F2 01 00 0C 92 0B 00 00 38 33 15 0B 00 51 07 63 17 65 1D 84 FF 2C 07 2D 15 F3 01 00 0C 92 0B 00 00 3C

Topic by jimk3038    |  last reply



Mega 2560

I bought the 2560 from amazon it came with cd but the 33 lessons r not in the code book tool how do i retrieve the right codes it has a 13 lesson starter kit in the code book i down loaded that it sent me to they dont match the lessons??/

Question by MathewW9  


What is this thing that looks like a shoe warmer?

Porcelan covered cast iron.  About 8 inches long.    Kind of heavy for its size.  The holes on the back don't appear to befor wall hanging.  The one on the "handle" is shallow and will not hold a nail for hanging.

Question by gloria.victor.33    |  last reply


Charging A car battery with a PSU's 3.3 and -12 rails? Answered

Hello guys, is it safe for my car battery to charge it with a computer psu between the +3.3 (15 amps) and -12 (0.5 amps) rails, the multimeter reads a voltage of 15.2 between them, Thanks

Question by Ninjabdou    |  last reply


Main Featured Nav Broken Link (Gardening links to wrong page)

There appears to be an incorrect URL for the "Gardening" section of the top 33 featured channels. Windows 10, Chrome 49.0.2 (problem also occurs in Firefox and seems to be browser-independent) Steps to Reproduce: 1) Visit Instructables.com 2) Click "Explore" (next to the search box) 3) Click "featured" 4) Hover over "everything" 5) From "Top Channels" click "Gardening" (see "navigation" screenshot: http://imgur.com/nMcSTMV) Clicking the link will result in reaching this page: https://www.instructables.com/tag/type-id/category-workshop/channel-gardening/ However, that gardening page only has 3 entries and is listed under the "Workshop" category. It seems to be the incorrect result given that the list of top 33 channels is based on the total number of entries in a channel, and the gardening channel under the "Home" category has approximately 5,900 entries as opposed to 3 :) Thus, the correct URL for the "Gardening" link in the Top 33 navigation should be: https://www.instructables.com/tag/type-id/category-home/channel-gardening/ The location where the link should be updated in the source is line 158 when viewing with the Chrome source viewer (see "source" screenshot: http://imgur.com/v1PMoNc)

Topic by DELETED_jtsherri1  


What car is this? Answered

Http://www.hulu.com/search?query=Thunderbolt+And+Lightfoot&st;=0   I just saw this movie and there was much debate over the make of this car.  Granted the link is a dark picture, but at 1:30:24 and 1:35:33, there are some shots of this car.  If you could kindly take the time I'd be most grateful....... not to mention you would settle an argument. Thanks

Question by onrust    |  last reply


inverter

I am making an inverter whivh converts 12 V dc to 230 V ac i am using 2 33 ohm resistor of 1 watt to connect the load on transformer whenever i switch on the ckt the 1 watt resistor are heating to much and multimeter does not show any voltage i am using 12 Volt dc 2.5AH battery as power supply what is the problem

Topic by AbhishekR2    |  last reply


Best Answers Count For 2010-04-30

.  Here's the lastest counts: lemonie:355 Re-design:324 frollard:241 Steveastrouk:185 Kiteman:165 orksecurity:160 seandogue:138 GuardianFox:132 kelseymh:139 NachoMahma:95 ZEROGX:83 Burf:83 RavingMadStudios:76 AndyGadget:67 NobodyInParticular:58 jeff-o:51 jtobako:48 alex-sharetskiy:43 Grathio:44 DJ+Radio:43 MahavishnuMan:44 Killer~SafeCracker:39 Gorfram:35 UziMonkey:34 11010010110:33 mikeasaurus:33 Joe+Martin:32 Jayefuu:30 caitlinsdad:26 gmoon:27 rickharris:23 AngryRedhead:22 Jack+A+Lopez:24 killerjackalope:20 Mr.+Stealth:20 cyberpageman:18 ChrysN:18 Prfesser:18 RelaxedSoup:18 siliconghost:18 karnuvap:17 randofo:17 CameronSS:15 fwjs28:15 iPodGuy:15 Zengineer1618:13 ewilhelm:12 canida:11 Goodhart:11 purduecer:11 Hiyadudez:10 kevinhannan:10 acidbass:10 gmjhowe:6 yokozuna:4 The+Ideanator:2 LoneWolf:3

Topic by NachoMahma    |  last reply


Viza Venom scooter won't run for more than 2 mins?

My son's Venom scooter has a Mitsubishi TLE 33cc motor on it and it starts just fine and warms up just fine but after a couple of mins of riding on it, it bogs down and dies. I had a guy look at it and he thinks the motor is cracked. Does anyone know where i can get a replacement Mitsubishi TLE 33 motor?

Question by JoeC174    |  last reply


Best Answer Counts as of 2010-04-11

.  As of Sunday, March 11, 2010, the following ppl have received patches (Username:#BestAnswers): lemonie:334 Re-design:315 frollard:235 Steveastrouk:175 Kiteman:163 orksecurity:146 seandogue:133 GuardianFox:128 kelseymh:126 .  The other ppl on the check list are: NachoMahma:86 ZEROGX:79 Burf:78 AndyGadget:66 RavingMadStudios:60 NobodyInParticular:58 jtobako:46 alex-sharetskiy:43 KillerSafeCracker:43 Grathio:41 DJ+Radio:41 MahavishnuMan:41 jeff-o:38 Gorfram:35 UziMonkey:34 11010010110:33 Joe+Martin:33 mikeasaurus:32 Jayefuu:29 caitlinsdad:26 AngryRedhead:22 gmoon:21 rickharris:21 Mr.+Stealth:20 Jack+A+Lopez:21 killerjackalope:20 cyberpageman:20 ChrysN:18 siliconghost:18 RelaxedSoup:18 karnuvap:17 Prfesser:16 CameronSS:15 randofo:15 fwjs28:15 iPodGuy:15 Zengineer1618:13 ewilhelm:12 kevinhannan:11 purduecer:11 canida:11 gmjhowe:6 yokozuna:2

Topic by NachoMahma    |  last reply


reducing current on a power supply

So I am trying to reduce the on the current power supply I have from an old router. The out put is 12v DC 800mA (.8A). I want to use it to run a man 12v .3AI just wanted to make sure I did my math right and to make sure I didnt miss anything.Ohms LawI = V/RR= V/I V = 12 I = .812/.8 = 15 ohms resistance in theroy_Current on the fan is .3 A, I am assuming that is the max. So desired current is .25I = .25 V = 12 R is current resistance, X is additional resistance Q=(R+X)I = V/QQ= V/IR+X = V/IX = (V/I) - R V = 12 I = .25 R = 15(12/.25) - 15 = 33 ohm resistance neededSo I would need a minimum of 33 ohm resistor. Am I correct?Sorry for the explicitness of the math, its been drilled into me to show every step.

Topic by dragonkeeper117    |  last reply


Knex Pricing

How much is Knex going for? I have a 33 lb. lot and was woundering how much you guys would pay for it.  I have lost all interest in Knexing, and am now into the real thing. I made the 6 foot and it sucked, but it did fire about 40 yards (you guys way over estimate range, there's no way you could get 200 yards out of a knex gun, I built the sr-v2 and it went 25 yards.)

Topic by Knex_Gun_Builder    |  last reply


Does anybody think this video is sad?

This video is a clip from Daft Punk's movie Electroma with a different song by them called Make Love.I find this clip very saddening. To get this jist of the movie watch the second clip (the video doesn't really start till 33 seconds in) and it has pretty good music! Basically the robot with the silver helmet wants to become human and the robot in the gold helmet is his best friend. They try and become human in a robot world. any thoughts?

Topic by guyfrom7up    |  last reply


Is it reasonable to convert energy to power over time?

I have recently been talking with another person on instructables about converting 33 megajoules into a standard comparable electric unit, watts.  Now the formula for joules just so happens to be watts times seconds, but he still thinks this is wrong.  He says I can't just assume time.  Now I can assume any amount of power for any amount of time I wan't to as long as it adds up to 33,000,000 joules in the end right.  So if I wan't to consume one watt every second, then I have to set the amount of time as 33,000,000 seconds or roughly 9,166.7 hours.  This all seems fine to me right, because one watt for 33,000,000 seconds is equivalent to 33 megajoules. Now I originally didn't understand all of this so I just fumbled around and ended up converting to hp and got roughly 12, which is very close for being a rounded off number.  It comes out over one hour to equal just over 32 megajoules.   I can't seem to understand what the problem is, the DEFINITION OF ENERGY/WORK IS POWER *(OR OVER THE PERIOD OF) TIME Is there really such flawed logic here that "joules could be converted to cubic meters?"

Question by jj.inc    |  last reply


Circuit-design Peltier Element

Hi. I need a little help from experienced people. I want to control a Peltier element with a microcontroller, with PWM. May? The peltier element has the following parameters: Imax=8.5 A, Vmax=15.4V.Ok... I have a 12 volt source,17A for example. How can i design the circuit so that i can control the peltier element?I use TEC-40-33-127. A link to the peltier element data sheet is:https://eu.mouser.com/datasheet/2/433/Wakefield_Ve...

Question by uicElla    |  last reply


Building a taller lift for my chair

So, I own an  adjustable bar-height stool with min-height of 24" and max-height of 33" and I wonder if it is possible to either   1) retrofit the existing hydraulic lift so I can get 10" more in height  2) Or completely build from scratch a similar hydraulic lift as the one I currently have installed except the new one would provide a max height of about 45"   I would appreciate any tips in accomplishing either of the above listed options please.

Topic by rumpells    |  last reply


My Didgeridoo

As some of you may know, my first attempt at getting a didgeridoo failed...but not my second! Here are some pictures of my brand new didge...just got it in the mail yesterday!It's an Indonesian imitation...$33 + shipping off amazon, but I figure it's great for my first one. Supposedly made out of bamboo...but i'm not so sure, especially because there are no nodes, and there's a bell at the bottom. It makes a great sound, and I love the (hand)painting, even if it's not done by an aborigine. I'm using a guitar stand to hold it, and plan on making a PVC case for it soon. (there will be an instructable)

Topic by Weissensteinburg    |  last reply


Can you use the Sixaxis controller with the nexus 7 (not the dualshock)?

Can you use the origional ps3 controller and not the dualshock with the nexus 7 This one: http://www.bestbuy.com/site/Agptek+-+SIXAXIS+Gaming+Pad+-+White/5294346.p?id=1218629903322&skuId;=5294346&st;=sixaxis controller&cp;=1&lp;=1 Not this one: http://www.bestbuy.com/site/Sony+-+DualShock+3+Wireless+Controller+for+PlayStation+3/8782533.p;jsessionid=7DA8370DA24B60532F7A7FF6EF401878.bbolsp-app06-33?id=1205245968202&skuId;=8782533&st;=dualshock 3&cp;=1&lp;=1

Question by builderkidj    |  last reply


Inventor Builds His Perfect Woman

From The Sun, 11 Dec 2008:SHE is the perfect wife, with the body of a Page 3 pin-up and housekeeping skills that put TV's Kim and Aggie to shame.Her name is Aiko, she can even read a map, and will never, ever, nag. Sounds too good to be true, doesn't she fellas? And she is.Aiko is actually a robot, a fantasy brought to life by inventor Le Trung. Devoted Aiko --- "in her 20s" --- has a stunning 32-23-33 figure, pretty face and shiny hair.She is always happy to clean the house for "husband" Le, help with his accounts or get him a drink.Computer ace Le, 33, from Ontario, Canada, has spent two years and £14,000 building his dream girl.He had planned to make an android to care for the elderly.But his project "inspired by sci-fi robots like Star Wars's C3PO " strayed off-course. [ ... ]He said: "Aiko doesn't need holidays, food or rest, and will work almost 24 hours a day. She is the perfect woman."Aiko sparks mixed reactions in public.Le said: "Women usually try to talk to her. But men always want to touch her, and if they do it the wrong way she slaps them."Read the whole article, with a video clip and pictures, at http://www.thesun.co.uk/sol/homepage/news/article2023392.ece

Topic by kelseymh    |  last reply


Album Review: ZZ Top - Tres Hombres (1973) *****

ZZ Top - Tres Hombres (1973)NachoMahma's Rating: *****Frank Beard - drumsBilly Gibbons - guitar and vocalsDusty Hill - bass and vocals10 Tracks, total time 33:3301 - Waitin' For The Bus (2:53)02 - Jesus Just Left Chicago (3:32)03 - Beer Drinkers And Hell Raisers (3:27)04 - Master Of Sparks (3:31)05 - Hot, Blue, And Righteous (3:18)06 - Move Me On Down The Line (2:31)07 - Precious And Grace (3:10)08 - La Grange (3:54)09 - Sheik (4:05)10 - Have You Heard? (3:13)Third album by the Texas trio. After 1972's rather fractured "Rio Grande Mud" the Little Ol' Band From Texas is finally getting their unique, bluesy sound down. All ten songs are solid ZZ Top and rate four or five stars (out of 5) - definitely a recommended buy. This album is before they discovered the horn section - just three gringos cranking out the tunes. From the slow "Hot, Blue and Righteous" to the Top 40 "La Grange" to the hard-driving "Beer Drinkers And Hell Raisers," there's something here for just about every rock and roll fan - especially those with a taste for white-boy blues.

Topic by NachoMahma    |  last reply


new to arduino, want to run a dual display for 2 sensors

I'm new to the Arduino community.  wanting to set up a dual radar setup with 2 ultrasonic sensors,  (Ultrasonic Sensor Module HC-SR04), and outputting to a pair of 7 segment displays ( two 7 segment displays each).  I've found a code to do a single could use a lot of help to output two at the same time, basically 2 lanes without 2 units.  im using an arduino mega, ordered a unor3 and hopefully it can be made to run on one or the other. code is as follows: /* HC-SR04 Sensor    The circuit:     * VCC connection of the sensor attached to +5V     * GND connection of the sensor attached to ground     * TRIG connection of the sensor attached to digital pin 2     * ECHO connection of the sensor attached to digital pin 4  */    /*  This is a radar ping sensor that calcultates the speed of an  object traveling away or towards the sensor. I took some of this  code for the HC-SR04 Sensor implementation by Tautvidas Sipavicius. The rest  is original code from me. I know that the seven segment display  code is not the best to look at or the most optimized but it  serves its purpose just fine and is easy to understand.    Written by Matthew Ladd  */   const int trigPin = 2; const int echoPin = 4;   void setup() {   // initialize serial communication:   Serial.begin(9600);   //First 7 segment (ones place)   pinMode(30,OUTPUT);//F   pinMode(31,OUTPUT);//G   pinMode(32,OUTPUT);//E   pinMode(33,OUTPUT);//D   pinMode(34,OUTPUT);//C   pinMode(35,OUTPUT);//B   pinMode(36,OUTPUT);//A   //Second 7 segment (tens place)   pinMode(37,OUTPUT);//F   pinMode(38,OUTPUT);//G   pinMode(39,OUTPUT);//E   pinMode(40,OUTPUT);//D   pinMode(41,OUTPUT);//C   pinMode(42,OUTPUT);//B   pinMode(43,OUTPUT);//A } void zerofirst(){   digitalWrite(30,LOW);   digitalWrite(31,HIGH);   digitalWrite(32,LOW);   digitalWrite(33,LOW);   digitalWrite(34,LOW);   digitalWrite(35,LOW);   digitalWrite(36,LOW); } void onefirst(){   digitalWrite(30,HIGH);   digitalWrite(31,HIGH);   digitalWrite(32,HIGH);   digitalWrite(33,HIGH);   digitalWrite(34,LOW);   digitalWrite(35,LOW);   digitalWrite(36,HIGH); } void twofirst(){   digitalWrite(30,HIGH);//F   digitalWrite(31,LOW);//G   digitalWrite(32,LOW);//E   digitalWrite(33,LOW);//D   digitalWrite(34,HIGH);//C   digitalWrite(35,LOW);//B   digitalWrite(36,LOW);//A } void threefirst(){   digitalWrite(30,HIGH);//F   digitalWrite(31,LOW);//G   digitalWrite(32,HIGH);//E   digitalWrite(33,LOW);//D   digitalWrite(34,LOW);//C   digitalWrite(35,LOW);//B   digitalWrite(36,LOW);//A } void fourfirst(){   digitalWrite(30,LOW);//F   digitalWrite(31,LOW);//G   digitalWrite(32,HIGH);//E   digitalWrite(33,HIGH);//D   digitalWrite(34,LOW);//C   digitalWrite(35,LOW);//B   digitalWrite(36,HIGH);//A } void fivefirst(){   digitalWrite(30,LOW);//F   digitalWrite(31,LOW);//G   digitalWrite(32,HIGH);//E   digitalWrite(33,LOW);//D   digitalWrite(34,LOW);//C   digitalWrite(35,HIGH);//B   digitalWrite(36,LOW);//A } void sixfirst(){   digitalWrite(30,LOW);//F   digitalWrite(31,LOW);//G   digitalWrite(32,LOW);//E   digitalWrite(33,LOW);//D   digitalWrite(34,LOW);//C   digitalWrite(35,HIGH);//B   digitalWrite(36,LOW);//A } void sevenfirst(){   digitalWrite(30,HIGH);//F   digitalWrite(31,HIGH);//G   digitalWrite(32,HIGH);//E   digitalWrite(33,HIGH);//D   digitalWrite(34,LOW);//C   digitalWrite(35,LOW);//B   digitalWrite(36,LOW);//A } void eightfirst(){   digitalWrite(30,LOW);//F   digitalWrite(31,LOW);//G   digitalWrite(32,LOW);//E   digitalWrite(33,LOW);//D   digitalWrite(34,LOW);//C   digitalWrite(35,LOW);//B   digitalWrite(36,LOW);//A } void ninefirst(){   digitalWrite(30,LOW);//F   digitalWrite(31,LOW);//G   digitalWrite(32,HIGH);//E   digitalWrite(33,HIGH);//D   digitalWrite(34,LOW);//C   digitalWrite(35,LOW);//B   digitalWrite(36,LOW);//A } void zerosecond(){   digitalWrite(37,LOW);   digitalWrite(38,HIGH);   digitalWrite(39,LOW);   digitalWrite(40,LOW);   digitalWrite(41,LOW);   digitalWrite(42,LOW);   digitalWrite(43,LOW); } void onesecond(){   digitalWrite(37,HIGH);   digitalWrite(38,HIGH);   digitalWrite(39,HIGH);   digitalWrite(40,HIGH);   digitalWrite(41,LOW);   digitalWrite(42,LOW);   digitalWrite(43,HIGH); } void twosecond(){   digitalWrite(37,HIGH);//F   digitalWrite(38,LOW);//G   digitalWrite(39,LOW);//E   digitalWrite(40,LOW);//D   digitalWrite(41,HIGH);//C   digitalWrite(42,LOW);//B   digitalWrite(43,LOW);//A } void threesecond(){   digitalWrite(37,HIGH);//F   digitalWrite(38,LOW);//G   digitalWrite(39,HIGH);//E   digitalWrite(40,LOW);//D   digitalWrite(41,LOW);//C   digitalWrite(42,LOW);//B   digitalWrite(43,LOW);//A } void foursecond(){   digitalWrite(37,LOW);//F   digitalWrite(38,LOW);//G   digitalWrite(39,HIGH);//E   digitalWrite(40,HIGH);//D   digitalWrite(41,LOW);//C   digitalWrite(42,LOW);//B   digitalWrite(43,HIGH);//A } void fivesecond(){   digitalWrite(37,LOW);//F   digitalWrite(38,LOW);//G   digitalWrite(39,HIGH);//E   digitalWrite(40,LOW);//D   digitalWrite(41,LOW);//C   digitalWrite(42,HIGH);//B   digitalWrite(43,LOW);//A } void sixsecond(){   digitalWrite(37,LOW);//F   digitalWrite(38,LOW);//G   digitalWrite(39,LOW);//E   digitalWrite(40,LOW);//D   digitalWrite(41,LOW);//C   digitalWrite(42,HIGH);//B   digitalWrite(43,LOW);//A } void sevensecond(){   digitalWrite(37,HIGH);//F   digitalWrite(38,HIGH);//G   digitalWrite(39,HIGH);//E   digitalWrite(40,HIGH);//D   digitalWrite(41,LOW);//C   digitalWrite(42,LOW);//B   digitalWrite(43,LOW);//A } void eightsecond(){   digitalWrite(37,LOW);//F   digitalWrite(38,LOW);//G   digitalWrite(39,LOW);//E   digitalWrite(40,LOW);//D   digitalWrite(41,LOW);//C   digitalWrite(42,LOW);//B   digitalWrite(43,LOW);//A } void ninesecond(){   digitalWrite(37,LOW);//F   digitalWrite(38,LOW);//G   digitalWrite(39,HIGH);//E   digitalWrite(40,HIGH);//D   digitalWrite(41,LOW);//C   digitalWrite(42,LOW);//B   digitalWrite(43,LOW);//A } long distanceOverTime(long first,long second){  return ((first-second)/.1)*.0223693629;//taking cm/s to mph } long holder;//store the cm from last time through loop. long temp;//used to store the speed value after changes int counter; void loop() {   // establish variables for duration of the ping,   // and the distance result in inches and centimeters:   long duration, inches, cm;   int tens;   int ones;   long Speed;   // The sensor is triggered by a HIGH pulse of 10 or more microseconds.   // Give a short LOW pulse beforehand to ensure a clean HIGH pulse:   pinMode(trigPin, OUTPUT);   digitalWrite(trigPin, LOW);   delayMicroseconds(2);   digitalWrite(trigPin, HIGH);   delayMicroseconds(10);   digitalWrite(trigPin, LOW);     // Read the signal from the sensor: a HIGH pulse whose   // duration is the time (in microseconds) from the sending   // of the ping to the reception of its echo off of an object.   pinMode(echoPin, INPUT);   duration = pulseIn(echoPin, HIGH);     // convert the time into a distance   inches = microsecondsToInches(duration);   cm = microsecondsToCentimeters(duration);   Speed=distanceOverTime(holder,cm);   holder=cm;//after speed caclulation so take the cm value for another calculation   Speed=abs(Speed);   if(Speed!=0 || counter==10){     temp=Speed;     counter=0;   }else{     counter++;   }   if(temp>=100){    zerofirst();    zerosecond();   }else{     ones=temp%10;     tens=temp/10;   }   if(ones == 0){     zerofirst();   }else if(ones==1){     onefirst();   }else if(ones==2){     twofirst();   }else if(ones==3){     threefirst();   }else if(ones==4){     fourfirst();   }else if(ones==5){     fivefirst();   }else if(ones==6){     sixfirst();   }else if(ones==7){     sevenfirst();   }else if(ones==8){     eightfirst();   }else if(ones==9){     ninefirst();   }   if(tens == 0){     zerosecond();   }else if(tens==1){     onesecond();   }else if(tens==2){     twosecond();   }else if(tens==3){     threesecond();   }else if(tens==4){     foursecond();   }else if(tens==5){     fivesecond();   }else if(tens==6){     sixsecond();   }else if(tens==7){     sevensecond();   }else if(tens==8){     eightsecond();   }else if(tens==9){     ninesecond();   }       Serial.print(inches);   Serial.print(" in, ");   Serial.print(cm);   Serial.print(" cm, ");   Serial.print(Speed);   Serial.print(" mph");   Serial.println();     delay(100); }   long microsecondsToInches(long microseconds) {   // According to Parallax's datasheet for the PING))), there are   // 73.746 microseconds per inch (i.e. sound travels at 1130 feet per   // second).  This gives the distance travelled by the ping, outbound   // and return, so we divide by 2 to get the distance of the obstacle.   // See: http://www.parallax.com/dl/docs/prod/acc/28015-PING-v1.3.pdf   return microseconds / 74 / 2; }   long microsecondsToCentimeters(long microseconds) {   // The speed of sound is 340 m/s or 29 microseconds per centimeter.   // The ping travels out and back, so to find the distance of the   // object we take half of the distance travelled.   return microseconds / 29 / 2; } again, all your help and thought are appricated

Topic by herb1977    |  last reply


Making The Most Of Your Time Here

If you're reading this, you're hopefully about to become an AiR in the best workshop on earth. Congratulations! This is an amazing opportunity, and i'd like to share my experiences so that you can hopefully glean some wisdom. When I got here, I was quickly humbled. For the first time in my life, I was intimidated. I had never been in such a vast playground and wealth of resources. I put myself under a lot of pressure. I started with some smaller projects that ended up taking a lot longer than anticipated. I did everything the hard way. During this time I formed a great relationship with shop staff, and gained a deep respect for them. A month will go by and you will look back and wonder where it all went. There are a million distractions, and it's a tough game to balance them all. In my last two months, I decided I needed to pick a problem to solve. I bit off more than I could chew, and I chewed it. I did something a bit unconventional, and did a project on sustainability. I was in over my head, and I brought in a friend for help. And i'm really glad I did. Don't constrain yourself to being an 'artist'. You are about to immerse yourself deep in the heart of the maker movement. Make things that you will be proud of, that you can do nowhere else.  This is an nearly infinite opportunity, with the only limiting factor being time. You are skilled enough, have the aptitude, and can do absolutely anything. So what on earth do you make?  Quick Tips: -Pick a problem, and solve it.  Pick a problem that's bigger than one person.  -Don't shackle additional commitments during this time. (I burnt out from a big side project) Devote yourself to the shop. -Reach out to someone at Autodesk, and see if you can get mentorship, or use your art to inform things that they are interested in. Form a relationship with them. You will find wisdom and friendship. -Find a peer, and check in regularly about the scope of your work.  -Pick someone to collaborate on a big project with. Make someone else's dream come true.  -Space out your classes. Don't do it all at once, or you'll forget what that critical button on the DMS is.  Time Breakdown: 33% of your time goes towards collaboration 33% towards learning new stuff that's way above your comfort level 33% for the stuff you can do with your eyes closed

Topic by buchananwp    |  last reply


Automatically unsubscribed from multiple people

Hi there, I don't know if it's just me, but for some reason, I get automatically unsubscribed from multiple users on this site. I noticed that the amount of people I was following dropped from 50 to around 26 yesterday. I re-subscribed to the authors I follow the most, up to 36 people. Yet it was at 33 today. This all seemed to happen overnight, so 'out of my control'. I don't know what's causing it, but it's certainly annoying. Some info about my system: Lenovo G500s laptop with Windows 8.1 The browser I'm using is Firefox, version 35.0.1

Topic by dr. richtofen    |  last reply


My Gnome desktop and me ? Answered

I have come to a weird realization or a Epihany, i love my desktop i love it with my heart (not as much as i love my mum) as soon as you get it you know what to do there is a varing amount of apps you can choose from and there at your finger tips. i dont realy know but you can hand me a windows 7 equiped laptop and i will whip it right at your face and say "i am faithfully engaged to my debian OS and were twittering"

Question by albylovesscience    |  last reply


good Custom mini ITX computer?

Hello, I am looking for a good Custom mini ITX build.The reason I want to do this is because I have a solar panel system set up.It is a 33 amp hour battery, 30 watt solar panel, 15 watt solar panel, and a charge regulator. Things I'm looking for in the computer Low Power - less than 40 watts 12 Volt - need this 100% Quiet - doesn't need to be but would be nice Duel Core 1.6 GHz or above - needs to be High Performance - good idea Small - not required but would be better  

Question by Daniel Deacon    |  last reply


Space Trash Crowds Orbiting Satellites

Two or three times a day, a satellite circling Earth narrowly misses destruction by an orbital hailstorm of junk sweeping the busy super highways of space.A spreading cloud of shrapnel from the collision of two satellites earlier this month is making wrecks for working spacecraft around Earth all but inevitable, analysts warn. As the ninth significant crack-up in two years -- including a punctured nuclear satellite -- the wreckage of Iridium 33 and Cosmos 2251 is fostering a chain reaction of collisions that puts billions of dollars of spacecraft and manned space flights at risk.Full article and really cool slideshow: Harmless Debris on Earth Is Devastating in Orbit - Wall Street Journal.via benjaneer.

Topic by noahw    |  last reply


Any ideas for what i can do with an empty Star Wars Darth Maul Lightsaber Candy Stick?

Picked one up for under a dollar at Salvos last year, and it's been sitting at the bottom of my wardrobe since. I have yet to open it up, but I reckon it should be completely hollow inside. It's about 33 cm long, 3 cm wide at the emitter heads and about an inch wide around the middle. Also, there is a blade on each end similar in construction to the toys you see in department stores, but only 12cm long. What should I do with it?

Question by T-K    |  last reply


Yeah, about my miter saw...

I know lots of people want me to post my miter saw, and I said I would. But I decided that I'm not going to post. It uses a lot of pieces, and only 3-4 people would be able to build it anyway. Sorry if your disappointed, but I did take pictures of it while I was taking it apart, so you'll be able to see the insides. I also included a parts list below if you're curious about how many pieces it used. :-)    Rods: 996 green-249 white-123 blue-347 yellow-96 red-34 gray-9 rigid tan-1 rigid black-1 flexi-rod (yellow rod length)-12 flexi-rod (gray rod length)-68 orange-56 Connectors: 804 dark gray-15 light gray-34 red-232 green-33 yellow-171 orange-59 white-74 blue-81 purple-179 Panels: 29 triangle mini-12 triangle small-16 square small-1 Other: 205 chain link-33 blue spacer-31 silver spacer-66 tan clip-18 metallic blue clip-15 black Y clip-5 red gear-8 small blue gear-2 orange splicer-12 battery-powered motor-1 tire-6 black snap cap-3 rubber band-3 fishing line-2 strands Total: 2,034 Here's some pictures of the saw's deconstruction and pieces.

Topic by Shadowman39    |  last reply


Smash atoms with Lego!

... or at least detect the debris of smashed particles with Lego: The LHC scientists do not yet have enough data to claim a discovery. But in the meantime, at home in Copenhagen, one physicist Sascha Mehlhase from the Niels Bohr Institute has made a part of the collider, the Atlas detector, out of LEGO toy bricks. »It took me about 48 hours to build the 3D model on my laptop and another 33 hours to actually put together all the pieces, this whole process spread out over several weeks,« explains Sascha. The model is made of 9,500 lego bricks and is about 1:50 in scale. There is no construction manual yet, but there will soon be one, he says on his website. The model is very intricate, even showing the innermost pixel detector. University Post article. Gallery of images.

Topic by Kiteman    |  last reply


The Thought Bunker #1

Hello! I am doing a new Forum Topic train. This one involves some thinking. But it's not math! It's the fun thinking. The kind you can talk and laugh(and in this case, maybe yawn) about. So, what do you say? This week's Thought Bunker: If everyone in the world were to yawn at the same exact time, would Earth have enough oxygen to sustain all of us? Well, what do you think? Tell us! And now for this weeks best-thought:   Nov 4, 2009. 4:33 PMSeleziona says:  yes, everybody breathes normally, no oxygen shortages, and yawning takes a little more air, but not too much. So earth would have enough oxygen, and half of the world is asleep when we are awake, so it would be highly improbable  

Topic by chopstx    |  last reply


Top 50 Instructables Authors of 2007 Ranked by Number of Instructables

This is the fourth in a series of data-analysis posts. Check out the first here. I love statistics, analysis, and raw data and so thought I'd share some of the really cool stuff with you. Thanks to trebuchet03 for helping with this and actually crafting the queries. Here are the Instructables authors who have the greatest number of Instructables in 2007. This list includes unpublished projects, so I bet some of these people have great things coming up!Instructable Author - Number of Instructables1. trebuchet03 - 722. TimAnderson - 473. Kiteman - 474. sam noyoun - 395. noahw - 366. Brennn10 - 357. canida - 358. loup226 - 339. ewilhelm - 3010. threadbanger - 2411. randofo - 2412. unclesam - 2213. stasterisk - 2214. neelandan - 2115. Kipkay - 2116. golics - 2117. TeacherOfTheWays - 2018. Weissensteinburg - 2019. logic bomb - 1920. Tool Using Animal - 1921. msolek - 1822. fungus amungus - 1823. PetervG - 1724. avinash - 1725. royalestel - 1726. indymogul - 1527. technick29 - 1428. jeffreyf - 1429. Aeshir - 1330. tycoyoken - 1331. bofthem - 1332. i make shooting things - 1233. babblin5 - 1234. 5Volt - 1235. sardines454 - 1236. funwithfire325 - 1237. Vendigroth - 1238. RealSimple.com - 1139. oldschoolstructure - 1140. Popular Mechanics - 1141. Daniel662000 - 1142. zieak - 1043. neighborsproject - 1044. Mr. Rig It - 1045. dave spencer - 1046. robbtoberfest - 1047. rachel - 1048. T3h_Muffinator - 1049. lemonie - 1050. degroof - 10

Topic by ewilhelm    |  last reply


The Best K'nex Guns Answered

This is an update to my previous question. I have found what I think is a good gun for all the types of guns. Ths is for my Knex War I'm having. I can't find a good rating real bolt action gun. Could someone please find one for me? Also, if there are any types of guns I'm missing, please tell me. Also, check out the guns that have the link and tell me which guns are not good or if there is a better gun for that type than the gun I chose. shotgun: Break Action Shotgun https://www.instructables.com/id/Knex-Break-Action-Shotgun/ pistol: Oblivitus' Beast Pistol https://www.instructables.com/id/Oblivitus_Beast_Pistol/ rifle: The Bolt https://www.instructables.com/id/Striker-Pro-assaultsniper/ machine gun: Machine Gun https://www.instructables.com/id/knex-machine-gun_2/ slingshot: Arrow Slingshot https://www.instructables.com/id/Materials_1/ crossbow: Reaper Crossbow https://www.instructables.com/id/Reaper-Crossbow/ sidearm: Sidearm RSN-33 https://www.instructables.com/id/knex-sidearm-RSN-33/ assault: Assault Rifle https://www.instructables.com/id/knex_assault_rifle_2/ semi-auto: Truly Semi-Automatic Gun https://www.instructables.com/id/Truly-semi-automatic-knex-gun/ pump action: Pump Action Rifle https://www.instructables.com/id/K_nex-pump-action-rifle-code%3aOSNJCKMA2/ lever action: Lever Action Rifle www.instructables.com/id/Lever-Action-Rifle/ bolt action: AR-4 Commando v3 https://www.instructables.com/id/AR-4-Commando-v3/ turret gun: TR18 https://www.instructables.com/id/TR18/ cannon: Heavy Cannon https://www.instructables.com/id/Knex-Heavy-Cannon/ bazooka: A.D.U Bazooka https://www.instructables.com/id/ADU_Bazooka_1040_Armor_Demelition_Unit/ pocket gun: Pocket Gun https://www.instructables.com/id/KNEX-POCKET-GUN/

Question by Danielzxzx1    |  last reply


I am trying to figure the new wattage? Answered

Hello, I built the ark welder from this instructable found athttps://www.instructables.com/id/Build-a-Microwave-Transformer-Homemade-Welder/ I'm trying to figure the new wattage I have two transformers 1: 650 watt MOT-primary at 120 volts 60 Hz 5.41 amps secondary at 16.5 volts 39.36amps 2: 600 watt MOT primary @ 120v  60Hz  5 amps secondary @ 16.5 volts 36 amps the primaries are wired in parallel in the secondaries are in series. The secondaries test at 33 V and I'm guessing roughly 76 amps. I want to calculate the wattage. Is the wattage calculator from the voltage on the primaries (120+120)*76 or calculated from the voltage on the secondaries (16.5+16.5)*76 or am I a complete moron? Also the primaries are parallel are they both 120 V or are they 60 V each thanks in advance.

Question by deadlift1979    |  last reply


Quilt Magic Kits- Foam boards with laser cut designs, patterns & fabric - Great craft !

Great for gift-giving or a quick, lightweight and easy-to-make craft day! Great for kids and adults. Kits range from size 6" x 6" to about 15 1/2" to 15 1/2"  some odd sizes such as 9" x 19" as well.  There is something for everyone. Prices range from $11 to $33 Check out the many designs available and email me at :  nosewcrafts@yahoo.com   for a free brochure! It's just trace, cut & tuck. It's like paint by number but with fabric instead of paint! Full written and illustrated instructions come with every kit. Kits are available for lesser cost without the fabric if you already have plenty of your own! Check out my website at  http://www.no-sewcrafts.com

Topic by nosewcrafts    |  last reply


Fan needs 12 volts at .44 amps. How can I limit the current to .44 amps from 2 amps, without losing the 12 volts? Answered

I am trying to power a fan that needs 12 volts at 440 milliamps. I have a wall-wart transformer that is 12 volts, 2.0 amps, and I many components. I have thermal compound,  heat sinks, resistors, 12 volt and lm317 voltage regulators. So, how can I limit the current to 440 milliamps from 2.0 amps, without losing the 12 volts? Also, I tried a resistor at 33 ohms and it burnt out. Thank you, Jeremy (Please note: I am teaching myself electrical engineering, I have not taken physics yet. My knowledge is based on sever books, web resources, and hundreds upon hundreds of youtube videos)

Question by JBronen    |  last reply


2 Firefox Bug Reports

MacBook (13-inch, Aluminum, Late 2008), OS X Yosemite Version 10.10.1 Firefox 33.1 https://www.instructables.com/id/Become-An-iPhone-Cartoonist/ or any Instructable for that matter. No screenshot When replying to a comment on an 'ible I have to click "Make Comment" twice in order for it to send. I realize that comments don't always get published because of this bug. It has happened to me on earlier versions of Firefox, as well. I now double check to be sure that my comments are sent. When creating Instructables, I always use the "Open In A New Tab" button so that my viewers don't lose my page after clicking on my links. This function does not work on my operating system. I have checked many 'ibles to see if it is isolated to just my published ones and that is not the case. The open in a new tab function does not work.

Topic by Tater Zoid  


How much water is in my cistern?

I built a 33 gallon cistern my garage to collect condensate from my HVAC system. (I didn't have room outside my condo for a rain barrel). It has a spigot and a short hose, it lives above my utility sink, which is where the overflow goes when the cistern is full. I'm hoping some clever makers can give me some ideas on how I can build something that will tell me how much water is in the cistern. I have Samsung SmartThings so I've considered putting a water sensor just below the overflow hole, so I will know when it's at 100%, but I would prefer to have a percentage reading and an alarm when it gets to 90% or so. I considered an arduino with an ultrasonic sensor but that a bit involved... Not opposed to it but please be prepared to hold my hand thru the process of you propose it! ☺. Non-SmartThings solutions also welcome.Thank you - looking forward to your genius ideas!!Mark

Topic by MarkB673    |  last reply