Search for Bulk in Topics


Cheap LEDs in Bulk?

I use Light Emitting Diodes for nearly every project I make. I have been looking as my receipts for the last six months at Radioshack, and found that I've purchased over 400 LEDs, and I have none remaining. I obviously go through them quite quick. Therefore, I am looking for a reliable website that sells LEDs in bulk for cheap. It is, quite obviously, expensive to buy 20 packs of LEDs from Radioshack (I've spent nearly $100), so I'd like to buy in bulk (which usually results in lower prices). Thanks in advance!

Topic by freethetech    |  last reply


Bulk/Cheap Electrical Components

I am growing tired of spending large amounts of money on few quantities of components. Are there any [trusted] sources to buy in bulk (for cheaper) from? I'd be more then happy to buy 1,000 LEDs for $20. That's fine with me. I'm currently spending about $2.00 on just 10 LEDs. Anything is an improvement. I'm trying to stay away from auction websites like eBay. Any suggestions are useful! Thanks!

Topic by freethetech    |  last reply


BABYDUINO FOR SALE IN BULK!!

BABYDUINO WHICH IS SHRINKIFIED ARDUINO IS FOR SALE!!! IF YOU WANT TO BUY IT PLEASE EMAIL AT: pateldarshil14@rediff.com For Further Instructions about Product see: https://www.instructables.com/id/Robotics-and-Automation-Shrinked-With-BABYDUINO/

Topic by Patel Darshil    |  last reply


Radioshack Submini Pushbutton Switch (275-1571) - Bulk?

I am looking to buy Radioshack's Submini Pushbutton Switch in bulk. I really can't seem to find it online anywhere.The package says that it is custom manufactured in China. I need to buy about 50, and possibly even more in the future, and with Radioshack's prices, it will be a pain to blow $75 for 50 switches.Thanks for your help.

Topic by Brennn10    |  last reply


Is there any way to add files to a massive number of zip files?

Hello, you may remember me asking how to download over 500 files. Each of those files were zip files and I've forgotten to add a readme and changelog to each of them. Is there any way to add these files to the zip's in bulk? I'm just curious here, I could have this done in half an hour of clicking and dragging.

Question by Nofew    |  last reply


need knex!!!?

i want knex alot of them in bulk so i can make the stuff you make on this site

Question by timnitro    |  last reply


Where to buy citrus peel in bulk?

Remember that orange peel cat litter that was briefly on the market about three years ago? The cats hated the stuff, but oh how it worked in the bunny's litter box. I want to buy orange peel in bulk, since the litter company appears to have gone under. But I don't want the fancy pants potpourri or medicinal or culinary stuff. The bunny won't come in direct contact with the litter, so such properties do not matter. Citrus peel + baking soda = best DIY bunny litter. Any suggestions of websites where I could order such citrus peel would be awesome. Thanks in advance!

Question by fangfriends    |  last reply


Has anyone made a gadget or machine to seal drinking straws in bulk.

Hi. my names ziyaad and i am from south africa.i recently started making a pixie stick, honey stix type candy in south africa.but i am having one problem which is sealing the straws in bulk.have no time to seal few at a time.need to seal like 2000 an hour.any ideas or help in this would be highly appreciated?

Topic by mzminty    |  last reply


Using Bulk Mailer's Envelopes Against Them

Does this really work? The Office of Strategic Influence reports that you can use the bulk mailer return envelopes to mail back heavy boxes to snail mail spammers. How can we test this?

Topic by nagutron    |  last reply


Where to buy art supplies in bulk online ?

I am an art teacher and planning to start summer art workshops. I want to buy art supplies in bulk for my students. I have heard that ASWexpress - http://www.aswexpress.com/ is the best place online to get all premium supplies at best price. Has any one joined them ? Any suggestions would be of great help.

Topic by jacobjackson    |  last reply


Artistic project with bulk cd/ dvd cases?

Couldn't decide if this was more of an art question or a craft question... but... You know the ones... the clear cylindrical cases that encase the 50 count blank cds/ dvds? I've seen a few projects here and there, but most look pretty ugly/ college dorm-ish. Guess I'm hoping for some magical suggestions for something kind of artistic? Modern art-ish? Esthetically pleasing in some way? Just plain fun? Doesn't have to be practical at all if it's interesting enough. I've got quite a pile going if it helps the juices. Any suggestions gladly accepted! Thanks!

Topic by kranders  


Where can I get bulk knex for cheap?

Im looking to make a few guns.

Question by PKTraceur    |  last reply



would it be possible to bulk up gold flake for scrap ? Answered

Would it be possible to bulk up gold leaf/flake of a high purity with a resin/hardener to scrap ? as the jeweller will take a filing to test  would the bulking agent be minimal to detect  because it not being an alloy/metal ? love a bit of knowledge about this before i buy 30 kg of gold flake/leaf ;-P thanks   MAGIXO

Question by magixo    |  last reply


Where can i get bulk 8mm leds?

Really any size above 7mm will do but i need 36 0f them to run on around 4 volts

Question by theboygenius    |  last reply


anyone know a good source of bulk flickering lights?

I'm looking for random-flickering amber leds in a christmas light-format. actually, it doesn't even have to be led. i am just looking for a good bulk supply of randomly flickering lights that i can wire up into a great big bunch of fake candles, and power off of wall voltage. does anyone know where to find such a thing?

Question by cyc4015    |  last reply


NYC where is the best place to buy bulk components

I am out in manhattan right now trying to find the best place to buy components [i.e. LEDs, Solder, resistors and such] in large quantity. anybody know of a good place? i'm kinda stumped here and i really want to get dtuff while i am out. what say you?

Topic by rocketboy    |  last reply


Help choosing a genral purpose mosfets to buy in bulk? Answered

Hi, I am looing at buying  some mosfets in bulk. I need a mix of genral purpose N-channel annd P-channel mosfets. These have to be able to handle up to 40V and around 5 amp. These will be used for genral motor controlling and inductive loads. But mostley for prototyping. I need a mosfet that is cheap, takes a bit of a bashing, robust, and easy to use. Any suggestions on what I should get. I need both P channel and N channel mosfets for genral use. Thanks for any help, David.

Question by David97    |  last reply


Where can I get bulk synthetic hair?

I want to make a plushie My Little Pony and I'm going to need a good amount of hair to do it. The only thing I've found so far is buying hair extensions, which would get very expensive very quickly, and most places don't have the colors I need. I want the colors to match the Friendship is Magical cartoon as closely as possible. The first one I do will be Fluttershy, so I'm looking for a light pink. I would prefer to spend less than $20 on the hair since I still have to get all the other materials as well. Is that possible?

Question by Wolf Seril    |  last reply


Is it good idea to change Simple Recover Model into Bulk-Logged on ETL system?

We are having an ETL process which inserts lots of data into tables. This database is set to Simple Recovery Model and the transaction log is growing a lot. I was thinking that would it help to set this database into Bulk-Logged Recovery Model? We are taking full backups on daily basis. So is there some operations which are not logged in Bulk-Logged Recovery Model compared to Simple Recovery Model?

Question by bugarl    |  last reply



LED powered party

So me and some friends a month ago got together and threw a party together last minute. Well it was more then just a hit, people turned around and begged us for more. So now that we have cred for this "epic" party which really was just random shit tossed together in a house in an hours time. So this time around we are going to go all out and spend our budget fully. But my job is to do his house like my room: I only have LEDs for lights. But the LEDs I used for my room I bought at radio shack and thus paid top dollar for them. Which was fine, for my room, but a house? I need bulk. Bulk LEDs, bulk resistors, bulk wire. But that's only half the problem, I was told my deadline was the 23rd. Well even with this short time frame I still need some good bulk dealers. Does anyone have any good links to places that sell LEDs in bulk? I'm looking to spend around 50 bucks or so on the lights. As I do this project though I will either make an inscrutable out of it or the very least a slide show!*

Topic by Vicious    |  last reply


Can I dip a cured resin object into more resin to gradually bulk it out?

I'm making resin icicles, but I feel it may be more realistic to dip the completed smooth shapes into resin to bulk them out and give them some water-like imperfections on the shape. Will this work or will uncured resin affect the cured resin?

Question by JinxKittie Cosplay    |  last reply




How can I make a cheap foam for sealing spaces - that's not edible by bugs :-)?

That's basically it - a cheap bulk foam filler. Thanx

Question by Baatjes    |  last reply


Favorites Error

For some  reason whenever i try to favorite somthing this error pops up error 500 -- error: org.hibernate.exception.DataException: could not execute native bulk manipulation query What is this? And can it be fixed?

Topic by wenpherd    |  last reply


How a Hacksaw Blade is Made

Hacksaw blades get used all the time in projects so take a couple minutes to see how they're made in bulk. via techeblog

Topic by fungus amungus    |  last reply


looking for an insane amount of pc case fans for cheap

Anybody buy case mod supplies dirt cheap?? if so where i'm looking to buy in bulk to start a case mod-overclock business

Topic by cazmundi    |  last reply



Can't favorite instructables anymore!!!!!

This has been happening since 7/15/10. Whenever I click on ANY instructable to favorite it, this message pops up, "error 500 -- error: org.hibernate.exeption.Data Exeption: could not execute native bulk manipulation query".

Topic by CrayfishYAY    |  last reply


What is cheapest? Laser cutting, cnc, plasma cutting, or water?

I am in need a service to cut bulk loads of parts, I am just throwing this question on in hope that I can have a little bit of guidance. Thankyou

Question by KyleofAsgard    |  last reply


Making Hypertufa Planters:

I live out of the country and finding bulk forms of perlite is next to impossible.    Is there something I can use in the recipe besides perlite?? (Recipe calls for: pearlite, peat moss, cement and reinforcing fibers)?  I can find everything but perlite. Thanks!

Question by houndlady    |  last reply


any one knows a good possibly cheap inflatable sculpture manufacture?

I'm working on a new body of works that involves inflatable sculpture so I'm looking for information on how to best work on a prototype as well as looking for a good manufacture to outsource the bulk of the work to.

Question  


Up-cycle an electric blanket? Answered

Our non-woven electric blanket has become unreliable and has been retired.    Is there anything useful I can do with the cords or blanket itself?  It's a lot of bulk to put in the trash.  The wires in the blanket make it undesirable as a regular blanket or quilt lining. 

Question by mole1    |  last reply


Fairchild LEDs?

Can someone show me where I can buy Fairchild LEDs? Preferably the 5mm kind. I know they are not cheap. I want 100 or less if possible. The Fairchild website is a bit confusing for me, and I have to buy in big bulks.

Question by vitruvian8807  


what to do with 30 high voltage camera flash circuits?

I need ideas to use 30 camera flash circuits, as i have bulk i want to use them in an array or all at once.As HiVoltage burst or light does not matterPersistance of vision?Starburst camera jammer?

Question by oliverkellow    |  last reply


How to buy LCD panels, inverters, and driver boards for a product/project I would like to build in bulk?

Thanks in advance for your help! I am trying to create my own kiosk style unit using the raspberry pi. For demonstration purposes it is basically a mame cabinet with some buttons an lcd... I want to be able to manufacture my product/project myself and sell it for a low price so I thought that a good way to do this is to use lcd panels with driver boards for only hdmi or composite. Does anyone know where I can look to buy 50 lcd panels for a cheap price with the backlight and driver boards included? Feel free to ask follow up questions. thanks!  :) Summary: Where can I buy Wholesale LCD

Question by undftdking    |  last reply


How can I hole punch thin plastic page protectors in bulk? Regular punches don't work...?

Update: I found my answer, see comment below.  In short: I used a Carl Heavy Duty hollow-head Hole Puncher, and it works great! I've been using plastic page protectors (these, specifically) in bulk, say about 1000 a month.  However, I need them to be 8.5 x 8.5 and I also need to punch holes that are slightly off from the factory holes.  I'm basically using these as a cheaper alternative to 8x8 scrapbook page protectors (which are prohibitively expensive - say $1 a sheet or so). I've figured out how to quickly cut the pages (using a rotary cutter), and that works great.  However, I am still struggling to find a way to quickly & cleanly punch holes in these things.  The problem is that the plastic binds, stretches, and does not cut cleanly.  I need a very sharp & precise puncher to do this quickly, and I haven't found one yet. I've tried normal 3-hole punchers.  I can punch them one at a time, if I hit the punch hard, and occasionally it binds & sticks (since the plastic stretches instead of breaking and gets caught in the mechanism).  I've tried hand-held punches as well, same result.  Also, aligning each individual page is time consuming as well. The problem with paper hold punchers is that they're made for paper.  They're inaccurate, not sharp, but strong.  The cheap & heavy duty ones alike only differ in how much paper they can punch, but neither are sharp/accurate enough for thin plastic sheets.  Is there a high-quality razor-sharp & ultra-precise hold puncher out there?  I haven't seen any that look even close. I've tried holding them down & drilling them.  The plastic wraps around the drill bit and they rip to shreds. I also tried a leather punch, but the ones I got were much too dull - they just dented the plastic. The only thing that has had some success is a dremel 115 cutter bit.  That actually cuts into the plastic, and if I go carefully (eating a bit at a time) it'll go through a lot of sheets at once.  However, it's messy, takes a lot of setup, and leaves a very messy hole (all chewed up). Ideally, I'd love to line up 10 sheets or so, have a way to align them (a jig?), and then punch them all at once w/o any binding or sticking. Does anyone have any other ideas?  I've thought of melting a hole, but then the pages would all stick together.  I'm completely boggled - how can I do this?  What tool can I buy for this?  What method haven't I tried? Thanks guys!  Any suggestions are appreciated.

Question by jumpfroggy    |  last reply


Desperately in need of drive belt for Delta 10" sidekick mitre saw 36-090

I have a Delta 10" sidekick mitre saw 36-090 and i need according to parts manual the bulk belt no.163. I've tried everything ebay, internet etc. where can i get one?

Question by AndyM229    |  last reply


Fire Safety!

I became interested in hobby electronics after seeing this instructable: Light BarWith projects like this, the more components I buy, the cheaper each component is (ex: buying LEDs in bulk) so I will likely end up with more parts than I would want for myself. If I make a lot of these things (or similar projects) and give some to friends, how can I make sure that they are completely safe?

Topic by NOOBLMAO    |  last reply


Wholesale electronic components???

I was hoping someone here would know of a place i could buy electronic components at wholsesale prices. I'll buy bulk. The reason i say this is a friend is setting up an electronics store, but at the moment it's looking like he'll have to buy-in at retail, which'll leave his sales prices very high. Please help me out. Tom

Topic by lifelong-newbie    |  last reply


Where can one buy Plexiglass at reasonable prices in reasonable quantities?

Is there any place (chain store, website, ebay shop, whatever) that any of you know of where one can buy plexiglass at reasonable prices without having to buy in bulk? Everywhere I have found has minimum shipments that are to large for me to efectively use.

Question by elyador    |  last reply


Need to hollow out a rectangular cut into thousands of dowel rods?

Hi All, I need to hollow out rectangular cuts into thousands of dowel rods. Is there a high end tool(s) that would make this a quick task so I could knock out at least 10 an hour? Or are there companies who provide custom wood pieces in bulk at a reasonable price? Thoughts! Thanks all!!

Question by barbaracj    |  last reply


custom battery

I need a 12 volt rechargeable battery configured like a 9 V  but it can be longer,,,I need as many amps as possible........maybe connect two 9v and cut voltage...is it possible? I'm dumb about these things so be gentle.....I have 8/ 1.2Volt batteries configured in a plastic holder..but the voltage is not working out.......any way to boost the voltage on the 1.2 batteries with out a lot of bulk?

Topic by antant00    |  last reply


In need if some direction for GPS tracker and app builder

I am looking for someone to give me a little bit of direction or reference as to where and or how I can find someone who can create a GPS tracker or tell me how to buy them in bulk..... Also I am looking for someone who can design or create an APP for smartphones. 

Topic by hansen413    |  last reply


Making pendants for a festival, need some advice.

Was wondering where I can get pendant plate by the bulk? I tried to google and find some but never came across anything that great. Also any advice where to get other things needed. Basically I am going to make a bunch of custom pendants for a huge festival, and make them related to some of the artists and would like some help with technical stuff.

Topic by Glazed    |  last reply


Nokia N95 8gb,Nokia N96,Apple iPhone 16gb,Apple iPod Touch 16gb

ORDER INFORMATION MINIMUM ORDER : BUY 3 GET 1 FREE PAYMENT METHOD : BANK TRANSFER (BULK ORDERS)/WESTERN UNION SHIPMENT METHOD : DHL OR UPS DELIVERY : 2/3 WORKING DAYS CONTACT INFORMATION FOR INQUIRYS. Sales EMail : comeandbuy@live.com Inquiry Email : salesinfo23@gmail.com Add us on MSN : comeandbuy@live.com

Topic by comeandbuy    |  last reply


Need help with a prank (filling up 38,000 12in ballons)

As a prank at my school i and a group of friends are going to fill the ceiling of the school with 38000 12in latex balloons We already have a bulk balloon and helum supplier the only thing is that it is going to take a lot of time in order to inflate and tie all those balloons i saw this https://www.instructables.com/id/Balloon-tying-jig/ and thought this might help but stil

Topic by markomo531161    |  last reply


LEDs on eBay?

My brother and I recently made an eBay account, and we were just browsing through everything and we came across many LEDs. Most of the LEDs in bulk that I saw were from China or Hong Kong. I am just curious if anyone knows how reliable, safe, and if I would be getting my money's worth. I did buy some from besthongkong.com, and those came, but I am a little skeptical about these guys on eBay. Any suggestions?

Topic by Brennn10    |  last reply