The forums are retiring and are now closed for new topics and comments. The existing content will remain online and accessible through 2020 to provide everyone the opportunity to save any relevant information. In the spring of 2021, these Community forums will be taken offline.

Search for GoPro in Topics


GoPro

GoPros are great cameras. They take great photos, but the photos take pictures of more than you point it at. Does anyone know how to fix this?

Topic by Wolf321    |  last reply


GoPro Mounts

I'm new to the world of GoPro and was wondering, where are some good spots to mount the camera, other than the helmet?  It would help to know, also, that my main use for it is snowboarding.  Your help is greatly appreciated!  

Question by FrodoandSam    |  last reply


gopro camera and gunfire? Answered

Hello, This question is aimed at anyone who has used a gopro near guns. . . . If I make a chest or head mount for a gopro hero, to use on a shooting range does anyone know if the gunshots are likely to damage the microphone ? If not, is the recording likely to sound like a gun shot or will it be just a clipped phut. Thanks

Question by FriendOfHumanity    |  last reply


ATV GoPro videos

Hello. I've recently been into filming and editing, and I threw this together. A bunch of clips of me and some friends riding our ATVs and dirtbikes around! Let me know what you guys think. Any tips on filming and stuff would be awesome as well!

Topic by koolcoasterkid  


Iphone controlled Gopro?

Ok, total noob here. First, I have a knockoff Gopro camera (Pyle). Are there instructions out here to build the capability to basically turn the camera on and off at will, remotely via cell phone? I'd like to be able to see what the dog is doing during the day. Since I have a "gopro", I'd like to just plug it into a device that I can turn on and off via the internet. This allows me to use the camera for an additional purpose. I would envision a box with all of the electronics inside that has a single cable that plugs into my camera. The box would be hooked up via Wi-Fi in the house to the internet. Not sure if I'm describing this correctly or not, but thanks in advance for help / advice / etc.

Topic by wavy chips    |  last reply


GoPro Scuba Cylinder Mount

Hi there, I'm new here. I've recently found an entry-level 3D online modelling software, Tinkercad and have been Tinkering ever since. I'm into scuba diving and I've long wanted to design a GoPro mount for the cylinder to give a 3rd person view of me while I'm swimming about enjoying life underwater. (Think a less-sexy Lara Croft!) I wanted to run it past you guys to see what you think. I've attached 2 screenshots, because as you can see, the mount I've designed is collapsible, to save space in my GoPro bag. I've done the maths (Pythag) so each side is perfectly lengthed to create a right-angled triangle, with the hypotaneuse (long edge) is facing down my body, towards my feet, so that the camera view won't be obstructed. I've used a Pythag triple, so the arms measure 3", 4", 5". This was done for 2 reasons: a) It was easier to desine using these measurements and b) I don't want it sticking too far up from my cylinder so that it doesn't catch on wildlife/coral/divers. As this is my first GoPro mount that I've designed, I've had to go on deimensions I've found online for the actual hinges. I've settled on approx 3mm for each prong as well as the gap in between. I have actually shaved off .25mm from the middle prong of the 3-pronged-hinge, and left the 2-pronged-hinge at 3mm for the gap and prongs. I'm going to get the pieces 3D-printed by a local service I've found on 3DHubs.com, either in ABS plastic or in resin, though I'll probably go for ABS as it seems to be a bit more hard-wearing, even if it's not so detailed. In terms of mounting it to the tank, I will use 2 headstraps, with the over-the-top strap removed from each one and glue the plastic bits of each of them together, at the correct length of course. I would join them using a seperate piece of plastic and either a hot glue gun, superglue or even some sort of epoxy, whatever lasts longest in prolonged exposure to seawater. I would probably place it nearer the top of the tank, near to where the strap of the BCD jacket goes round it. Does anybody have any advice for me in terms of the design from a functional point of view as well as from whether they think it would actually get a good shot on the camera please? I look forward to your feedback, good or bad!

Topic by JackIsted    |  last reply


GoPro Scuba Cylinder Mount

Hi there, I'm new here. I've recently found an entry-level 3D online modelling software, Tinkercad and have been Tinkering ever since. I'm into scuba diving and I've long wanted to design a GoPro mount for the cylinder to give a 3rd person view of me while I'm swimming about enjoying life underwater. (Think a less-sexy Lara Croft!) I wanted to run it past you guys to see what you think. I've attached 2 screenshots, because as you can see, the mount I've designed is collapsible, to save space in my GoPro bag. I've done the maths (Pythag) so each side is perfectly lengthed to create a right-angled triangle, with the hypotaneuse (long edge) is facing down my body, towards my feet, so that the camera view won't be obstructed. I've used a Pythag triple, so the arms measure 3", 4", 5". This was done for 2 reasons: a) It was easier to desine using these measurements and b) I don't want it sticking too far up from my cylinder so that it doesn't catch on wildlife/coral/divers. As this is my first GoPro mount that I've designed, I've had to go on deimensions I've found online for the actual hinges. I've settled on approx 3mm for each prong as well as the gap in between. I have actually shaved off .25mm from the middle prong of the 3-pronged-hinge, and left the 2-pronged-hinge at 3mm for the gap and prongs. I'm going to get the pieces 3D-printed by a local service I've found on 3DHubs.com, either in ABS plastic or in resin, though I'll probably go for ABS as it seems to be a bit more hard-wearing, even if it's not so detailed. In terms of mounting it to the tank, I will use 2 headstraps, with the over-the-top strap removed from each one and glue the plastic bits of each of them together, at the correct length of course. I would join them using a seperate piece of plastic and either a hot glue gun, superglue or even some sort of epoxy, whatever lasts longest in prolonged exposure to seawater. I would probably place it nearer the top of the tank, near to where the strap of the BCD jacket goes round it. Does anybody have any advice for me in terms of the design from a functional point of view as well as from whether they think it would actually get a good shot on the camera please? I look forward to your feedback, good or bad!

Topic by JackIsted    |  last reply


gopro session will lcd back pac work? Answered

So i need a lcd screen for my gopro hero 4 session for my duke of Edinburgh i just dont know what will work or not so please help or tell me any other similar things that will work

Question by paul the maker    |  last reply


Can I move a GoPro Sensor to a different case?

I was wondering whether I could take apart a GoPro (hero 4 silver) and then put the sensor and components into a DSLR case in order to use the DSLR's lens to avoid the fish eye effect. How could I keep the sensor intact/clean during this process?

Question by versos-tk    |  last reply


How can you make Gopro mounts with resin?

I have an HD Hero 2 and I would like to know how to make mounts with resin and harder.

Question by alspad    |  last reply


AirDog: World's First Auto-Follow Drone for GoPro

Hey everyone! I wanted to tell you about this new awesome thing called AirDog. AirDog is the world's first auto-follow drone for GoPro camera that follows and films you autonomously, so you don’t need to rely on filmmaking crew to get breathtaking views. Forget about remote control operation – Airdog is a unique solution for action sports or anything else you wish to film without actually holding your GoPro. Here you can see our AirDog in action: http://bit.ly/AirDogVideo Have a look at our Kickstarter page: http://bit.ly/KickstartAirDog It would mean a world to us if you could support it or spread the word on your websites. Let’s make a revolution in drone-made photos and videos together! There are four major AirDog advantages: 1. It is tested and working prototype ready for production. 2. It will be the first commercial product of its kind in the market from November 2014. 3. It has AirLeash - waterproof GPS device tracking your movement with a significantly better signal than smartphones. 4. Two years of R&D; invested into the creation of a working prototype to get the best possible solution. We'll be thrilled to hear from you! If you want to know more, don't hesitate to ask us anything - dita@airdog.com Best regards, Dita Team Airdog http://airdog.com/

Topic by AirDogdrone    |  last reply


Can you easily hide a GoPro Hero 3 Camera in regular clothes, in such a way that you still record your point of view?

Can you easily hide a GoPro Hero 3 Camera in regular clothes, in such a way that you still record your point of view?

Question by bethekind    |  last reply


Unable to create instructables- Redirected to RegisterNew

Dear all, Since a week i am not able to make ANY new instructables on ANY of my Machines. The new instructable button simply re-directs me to- https://www.instructables.com/account/gopro?newMember=true I tried clearing the cahce, Cookies and trying it on 3 PCs that I have. Same problem. Please help.

Topic by Zen Innovations    |  last reply


GoPro Hero (2014 Model) - How to convert into a CCTV device or similar (like Casey Neistat's peephole)?

I have an old GoPro Hero 2014 that has broken mounting clips and lid hinge and would like to repurpose it as a security camera. Now, I would like it to be similar to Casey Neistat's peephole setup (constantly on, hooked up to either an old small monitor/TV). I will be setting it up as a lookout for people in my driveway pad going to my garage while I am in the garage (blind sides). This way I can tell whos approaching. I have no experience in setting this up and I have searched the google and the youtubes for steps but none lead to broken down steps. This here is the disassembly of the GoPro. https://youtu.be/RtO0LCT0xSo Hopefully either someone can describe the steps for me or actually create an Instructable.

Question by JoelA82  


Building a GoPro carrying beast of an R/C car - without Arduino? Answered

So here's the deal. I've gotten it into my head to build a camera platform, primarily for GoPros but depending on its strength and durability perhaps other cameras as well. Seeing as there is nothing for it but to dive in over my head I started looking at robotics platforms and was immediately put off by the condesending tone and the "you's goin' back to schools" amount of reading, studying and groveling for answers at the feet of someone fifteen years my junior - No bleeping way. So I wanna basically build an RC car from scratch out of a sheet metal box. As far as I've come up with I need the following: - An ESC - electric speed controller - A 4-6 channel Transmitter and receiver combo (been looking at Graupner) - A power source (to be determined by the motors and ESC) - A power switch (well duh) - 4 identical electric motors - 4 Tires (preferably with a 12-14cm diameter) So now for the stuff I need help from people that presumably know what they're talking about What motors should I choose? - My guesstimation to the chassis weight is between 500 g and 1kg but was hoping for a payload capacity of appx. 3-5 kg and a top speed at load of about 8-12 km/h (brisk walking pace to jogging). Been told " geared and with an rpm of 250...ish". What battery should I use as to get at least 20-30 min out of one charge at 80% of max load (also determined by the choice of motors) What motor control/ESC should I get - I would like to avoid frying it by putting it under to heavy a load voltage wise when using it the first time. Finally I need tips on a good transmitter and receiver combo for skid steer since I'll be running the motors at equal rpm's per side controlled by the left and right stick, steering by braking and reversing tank style. Have I forgotten anything? Feel free to enlighten me if so. Including my sketches/designs so you know what I am aiming at and should someone feel like building from them please go ahead (film a tutorial for me ;) ) In some of the sketches it shows the use of an Arduino board but I am looking to avoid this, they were early sketches and I didn't notice until I uploaded. I am also VERY bad at higher level math or physics so please be gentle with me. PROJECT HAS BEEN PUT ON HOLD DUE TO BUYING A 3D-PRINTER. THANK YOU FOR YOUR ANSWERS ANYWAY.

Question by Alt-Horizon    |  last reply


Searching for a cheap Quadcopter(Used, kit, or anything)

Hello. Im a young filmmaker and DIY guy with no money because of my college. I Have a project in mind that involves my GoPro and a quadcopter. Only problem is that i don't have a quadcopter, neither money to buy one. I searched on ebay for a cheap one, but I find only small ones and at a pretty expensive price for what you get($40). Does someone have any quadcopter or a KIT quadcopter, or a wrecked quadcopter thats easy to repair, or maybe a good soul that would give one away for cheap to a dreamer student?  I would pay the shipping too, but I would need it to be shipped to croatia... Anyone like that? Please help me..

Topic by dsirotic  


F330 camera drone help

Hello. I have ordered an F330 frame kit for a drone i wanna build. Basically its that frame because of its compact size, but i want it to have a lot of power since it will have to carry couple of different cameras, including a Gopro, and some mirrorless cameras. Would also like to have a decent flight time(30min) and decent range. Motors should be oveely powerful since i am experimenting with cameras etc, so i dont want it to struggle. Speed or performance isnt an issue, just the heavy payload. What motors should i use, that would fit the 330 frame? Also what battery and transmitter

Question by dsirotic  


Is it possible to put batteries in parallel to increase battery life?

I was just wondering if it is possible to put batteries in parallel to increase battery life? I was thinking of the Go Pro Hero 3 camera. I know they have a battery backpack, but I just wanted to know if it was possible to stretch the battery life, if you bought lots of batteries and put them in parallel.... And attach the pack of batteries with a cord. Or is there another way to do the same thing?

Question by bethekind  


How come I can't favorite? Answered

How come I can't favorite any instructables anymore?  When you compare between Pro and Free it says its for both. https://www.instructables.com/account/gopro?

Question by mattmahn    |  last reply


No currency on Premium membership prices

Hi All, When I open https://www.instructables.com/account/gopro?sourcea=pane_pro&sourceaUrl;=/you I can't see any currency for the money shown. Is it USD, EUR, CHF? Regards Ilian

Topic by FireSword    |  last reply


CCTV camera? Answered

This isn't really a question as such. I have been looking at the news of the various attacks around the world recently and almost 100 % of the CCT camera footage is appalling. WHY? You can buy a 1080P gopro for a couple of hundred pounds. Why are these picture so bad.

Question by rickharris    |  last reply


low light video

I need to wirelessly video a seance in low light and remotely view what the camera captures as it is happening. Web cam? GoPro? Android Galaxy III? How could I view the digital video remotely? Laptop? Another phone? Thanks for ideas.  Ourladyofquacamole

Topic by ourladyofguacamole    |  last reply


How can i use a small camera lcd screen for something? And how do i make an imput for it?

Its a 2.5 inch lcd screen but i dont know how to make it posable ot plug something into it. Ex. a GoPro camera. any sugestions?

Question by csmity9    |  last reply


FPV Quad-copter Build?

I want to build a Quadcopter with some specifications: -GoPro Hero3 Mount -Additional wireless onboard FPV camera -About a 2 mile range -GPS to return to certain location  -30 minute battery life My budget would be around $200-500 Is this build possible? If so, is my budget enough? or is it going to cost more? May anyone help me on the specifications on the hardware (Motors,ESC's, Flight Control, GPS)

Question by joselalala    |  last reply


Help Motor Control!

Hey guys, I need to create a motor that can have a fader/dial so that I can control its speed (rotations). I figure it must be a simple enough system but I don't even know where to begin in terms of parts. I just need it to be strong enough that I can spin a GoPro camera (fairly light - but not toy car motor weak). Sincerely, Alex

Topic by mrmadsci    |  last reply


More forum topics link to Go Pro screen.

Https://www.instructables.com/account/gopro?nxtPgName=/community/What-are-digital-patches/&nxtPg;=/community/What-are-digital-patches/I believe this is a non-Pro member asking a question in non-Pro forum so it should be viewable by all. Clicking on the topic gives you the Go Pro screen. IE8 and Safari show same so it is not a browser error. I went to member D4VOBRO orangeboard and his other previous topic brings up Go Pro screen also.

Topic by caitlinsdad    |  last reply


Cannot access pre-existing "non-pro" topic (and captcha not required for PM)

Part 1:I can no longer access this topic:https://www.instructables.com/community/Could-this-be-used-as-a-guitar-amp-or-converted-in/...which I had replied to earlier. It was created by jackillac92 a day or two ago.When clicking on the above URL, it's redirected to:https://www.instructables.com/account/gopro?nxtPgName=/community/Could-this-be-used-as-a-guitar-amp-or-converted-in/&nxtPg;=/community/Could-this-be-used-as-a-guitar-amp-or-converted-in/Part 2:When I sent a PM to jackillac92 to notify him that I could see his msgs but not respond, I was NOT sent through the usual captcha hoop before the msg was sent.

Topic by gmoon    |  last reply


The Game.Life 3 Contest is starting soon!

Gather up all those extra lives you have laying around - Game.Life is back for its third installment! We want to see your most fantastic gaming instructables - retro or modern, complex or simple! Whether you're modding your game console or baking a Portal cake, we want to see it. Enter a videogame related project between March 25 and April 29 for a chance to win a GoPro Helmet Hero or some amazing gaming accessories including a portable S/NES, wireless controllers, and Minecraft and Portal items. P.S. - Make sure you don't publish your instructable before the 25th!

Topic by jessyratfink    |  last reply


Just wondering about what you actually get in a Pro Membership.

I was doing some poking around the site and found this page: https://www.instructables.com/account/give it talks about a few things that I haven't heard of or noticed since being pro for a while. These include: WYSIWYG Rich Text Editor? I did not notice the editor change at all when upgrading to a pro membership. Is this talking about being able to access and edit the HTML of an instructable? Author Intro - I am guessing this is different than the author bio, so I am not sure... Private Instructables - I have never seen an option to make an instructable private. --- After typing the above out, I logged out of my account and went to the signup page here: https://www.instructables.com/account/gopro and it seems the author intro and the WYSIWYG rich text editor seems to have disappeared however the private instructables feature is still there. If it has any meaning, I didn't pay for pro, I am using one my free 1 year pro memberships for getting a hompage feature.

Topic by PerfectPixel    |  last reply


Advice to build a tank to film dunking a basketball!

Hello!Here’s my challenge! I need your help. Could you recommend a build for this project?I’m looking to build a solution so I can film myself dunking a basketball. I would like the shot to follow me as I approach the hoop from about 10-15 feet away. My idea is a tank with a mounted GoPro onto it, possibly on a tabletop tripod as well.My budget is $50-100. The tank would need to move simultaneously with me as I approach the hoop. I thought perhaps a line tracking sensor could work, I could lay a piece of contrast tape on the solid colored basketball court. Or if I can program a movement with proper timing. Whichever is easier.I chose a tank versus car so that it would reduce vibration and steadier shot. Also a tank is sturdier so in case the ball flies over and hits the tank and camera.I don’t have any programming or robotics experience, but I’m a quick learner. I’d rather not tinker too much, and just want to have a working solution so I can focus on dunking!thanks for your help!Bhere’s a possibly chassis: OTTFF Robot Tank Chassis Track Compatible with Arduino Tank Aluminum Alloy Chassis Raspberry DIY STEM - Speed of 20m / min Maximum Load 2kg https://www.amazon.com/dp/B07C2Q63XG/ref=cm_sw_r_...

Question by bsee20  


#HackHalloween with Instructables AND littleBits!

Have you already created a bitified Halloween project for Instructables' Halloween contest? Forget double toil and double trouble - you can submit your project to littleBits' #HackHalloween contest for double the chances to win! Just make sure it include Bits ;) (^**> Click here for all the spooky details <**^) PRIZES You can win a GoPro camera and up to $3000 worth of Bits! JUDGES Get your work in front of the amazing likes of …. Neil Huxley, Creative Director for Commercials at Digital Domain We <3 Neil's special FX skillz. Check out James Cameron’s “Avatar” and Zack Snyder’s “Watchmen” to see what we mean. Tony DeRose, Oscar Winning Scientist at Pixar Tony combines his years of working at Pixar with his love of learning to inspire young inventors. CHALLENGE First, invent a creepy costume or hair-raising prank OR use one you've already made! Next, film your own scary movie featuring your frightful masterpiece! TO ENTER Submit your video and documentation of your littleBits creation on YouTube and the Community Project Page with the hashtag #HackHalloween by midnight EST on SUNDAY, NOVEMBER 1st. The petrifying project possibilities are endless! You can…. - Trick out your pumpkin by making it a hack-o’-lantern - Amp up your Halloween gear! Time to pull out that glowing skeleton costume. - Make a trick AND treat candy bowl: a prank to petrify costumed candy-grabbers. Muuahhahahahahaha! - Create that creaky, spooky sound coming from around the corner Want to host a meetup with your friends? We've put together a nifty workshop guide for you.

Topic by liza.stark    |  last reply


September 2014 Build Night with Sugru

125 SPACES AVAILABLE Deadline to sign up: Monday, August 4. Accepted spaces will be notified by August 6. SEPTEMBER BUILD NIGHT We are partnering with Sugru, the amazing self setting rubber, for our September 2014 build night. This is our 2nd build night with Sugru and we couldn’t be more excited! Sign up and we will ship you a package that includes: (8) packs of sugru (1 pack = 8 mini packs) HOW TO PARTICIPATE: Host a Build Night: pick a night in September (any night) to host a project build night using Sugru. You can host multiple build nights during September and October to work on your projects. Post 3 Instructables: post 3 Instructables using Sugru. We are looking for these projects to showcase unique uses for Sugru. (Not posting these Instructables will affect your chances to participate in future build nights). Check here for some inspiration. 5 creative ways to improve your kitchen 5 ideas for sugru in your garden 11 ways to sugruify your keys 8 ways to make your GoPro even more amazing 10 ways to refresh vintage finds 12 musicians get creative with sugru 7 clever ideas sugru + velcro 20 sugru holiday hacks 20 ways sugru can improve your crafting kit Brownie Points (not required): after the build night post a forum topic on Instructables about your event. Include pictures, stories, etc... Here are two examples from past build nights: Noisebridge and Makers Local 256. We may even feature your photos on the homepage. CHALLENGE The two spaces that submit the Instructables with the most unique use of sugru will receive a copy of the Autodesk Product Design Suite Ultimate (first prize) and a Nikon D5200 Digital SLR Camera (second prize). Grand Prize (Autodesk Design Suite): Dynamic Motor Balancing with Sugru and an iPhone by Phoenix Asylum First Prize (DSLR Camera): Poor Mans Fire Works by ShakeTheFuture Honorary Mentions (Instructables t-shirts): Sugru Raspberry Pi Corners by Geekspace Gwinnett Stop Motion Puppetry with Sugru by Hitchin Hackspace SIGN UP - Please only sign up if you are able to complete the requirements listed above This is a 2-step sign up process.  YOU MUST COMPLETE BOTH TO FULLY SIGN UP. Fill out this google form. You will then receive a private message in your Instructables inbox by August 6 asking for your shipping information. You cannot receive the Sugru materials without completing this step. Selection Process: This is NOT first come first serve. We look at past build night participation, past project quality, and project proposals for the current build night. If you haven't participated in a build night OR haven't submitted Instructables for build nights you signed up for we suggest your space create Instructables over the next few months and submit them in future applications. RESOURCES: Sugru Website Instructables App (for documentation during the build night): iOS and Android JOIN OUR ANNOUNCEMENT LIST If you are interested in being directly notified about future build nights fill out this form. You will receive an e-mail when new events are announced in the forums. Please only sign up if you are not already on the build night mailing list. ABOUT BUILD NIGHTS Instructables is sponsoring monthly build nights at makerspaces and hackerspaces around the world. Each month we partner with a different company to send you materials and/or tools to run a workshop at your space. In return your space posts Instructables from your build night.

Topic by Carleyy    |  last reply


Your thoughts on "UFO's", strange things and the unknown

Don't take what comes below too serious please ;) I thought for the start of the new year it would be fun to talk about things we take for granted or that we would call nonsense. You know topis like those provided by Erich Däniken and other that think outside the conventional archiological range. Modern science has provided us with new insights into very old stuff but also a new look on things we thought to know better anyway. Here is some food for thought: 1. India... In this beautiful and old country it was discovered that hundreds if not over 2000 years ago people used lathe technology on stones. For example to make pillars with a weight over a few tons... Chains were created from molten rock and in many areas you find polished stone that even after hundreds of years still has a mirror finnish. Some of these creations are claimed to be made with hammer and chisel but how do you get a displayed accuracy that even modern technology struggles to provide? I don't want to clutter everything with video links but check Youtube and you will find temples in India showing musical granite pillars and chambers carved into solid rock with a precision that seems impossible! If that long ago human knd already knew about gear systems and lathe technology, then what else have we lost over time that we now claim as new technologies? How could anyone polish an entire granite hall and a big one that is to a mirror finnish? 2. Peru... Apart from being full of archeological wonders there is also the impossible to be found. The Nazca region shows, in aerial views, kilometer long and perfectly straight lines. In other regions, also in other continents, we can see images of strange people or artwork - again only from high above ground level. Some of the artwork is only in correct proportions and with proper contours if watched from a very specific angle to the mountain in question. The kilometer long lines are not simply on standard mountain faces but instead on top of mountain that have the top removed to be perfectly flat. And even with a lot of posible options to interpret the lines they look like any other huge, modern airport landing strips - including runways and tracks to areas we would call terminals or service bays. You can ignore all possible ways to interpret the design and possible use, what you can't ignore is the missing mountain top and level of accuracy on such a massive scale! 3. Pyramids... On all continents except Australia we find pyramid structures with very similar features in terms of proportions, angles and the way the face in a certain direction. In Egypt they just recently found another hidden chamber... Tunnels, too small for a human to fit point to stars and star signs. Some of the tools used to create were found with the help of small robots but also that some seem to be quite modern in age. Did grave robbers use them at a time were it is beleived that such tools were impossible to create? Or could they be as old as the pyramids itself? In south america we find pyramid structures looking quite similar to those in Egypt - why so similar in features and appearance if there was no contact between the two civilisations? To make things worse some of the Inca structures show tunnel and channel systems "leading" to the pyramid in question. Classic thought is that they were like tunnels to direct water or provide access in the beleive the jungle was not removed to hide the complex. Makes no sense if you see the city like areas that are now exposed and studied. I mean: how would created a city in the jungle without removing the trees?? What could make you wonder is a simulation that was performed several years ago. Based on a computer model in 3D different theories were tested. Irrigation was ruled out quickly, same for access routes or secret tunnels for the priests. One funny student got bored and decided to play god. Assuming the Inca priests would call their gods in the sky temple to provide rain he let a monsoon go down on the pyramid. The result was unexpected so he showed the results to his companions and they did the same test agin but simulated a massive airflow going down directly on the pyramid. Turned out the flow would be directed away under ground with more efficiency than systems Nasa uses today for rockets and space shuttles... Mind you the tunnels are far from straight and without this simulation it was trusted that they could not do this stuff... We now have rocket technology that uses surface direction and vector control. The square and flat designs leave a void insight that pretty much perferctly match the angles of those inca pyramids? Apart from pure coincidence, what could be the reason for this match in shape and angle with a tunnel system perfect to remove hot engine gasses? Ok, I admit, not all continents, the pyramids in Bosnia are just a hoax, so Europe is out of the race ;) Sorry Semir :) 4. Artwork... Be it here in Australia, the African desert or America - we find images of mystical people or rulers that could make you wonder. Again modern tech in the form color filtering, desitity readings and 3D scanning provided us details unseen before. If you think of gods in very ancient times and try to imagine you would be a native: What do think how many different images of their god could 100 people imagine? Let's agree it would be plenty... But if we study artwork in caves and rocks from around the world we find similarities that IMHO can't be explained. Many show features that, compared with modern technology, could be mistaken for helmets, gloves or even manual control systems. Others show things thought to be as simple as pine cones to resemble modern milling or finnishing tools. Again only possible by enhancing details the naked eye won't see. With no contact to each other and often thausand of years apart: What could the reason for having images of their gods show very similar and sometimes identical "features" ? 5. UFO technology and sightings... Some people love to post videos of secret weapons and UFO's that are simple rocket launches at a perfect time and with perfect weather conditions to attract attention. But what about the things we don't get to see? Just recently the US finally admitted to have a program to investigate what we might call "UFO activity", quite costly one too... This means a lot of leaked videos from fighter planes or spy planes you find on the net are actually the real deal. Often "enhanced" with editing tools but authentic ones have been released by the military and other organisations now too. If it happens over US ground and no US organisations admits to be flying the things we see than what it is? Right, it is a UFO - An Unidentified Flying Object! Does not mean it is alien, despite far too many people thinking an UFO must be alien :( UFO means just that! At the time of seeing it the ones seeing it can not identify the craft or "thing". And, no you are not alone! ;) Happens in all parts of the world and even commercial pilots upload what they can't explain. Oh, you are still a sceptic? Does that mean you think some of these sightings must be alien or do think someone down here uses technology we are not supposed to know of? If you are like me you might like to relax watching the live feed from the ISS. In case you are not try it anyway! Every noticed that that despite the stations own speed "forgeign" objects appear to come towards the station or even to grow in size very quickly? If so you also noticed another very strange thing... No matter what happens up there the stream keeps playing, even at times when the station is moved around a bit to avoid a possible hit with debris. But every single time something appears to move around the ISS or come close to it the feed cuts out. Ok, not every time, for well known stuff orbiting around like satellites, other stations, rocket lauchnes or supply flights they stay on. So, what are those flying objects changing course and direction or even circling the station? Why does the live feed cut out once an object is identified to be unidentified? 6. Roswell technology boom... Some think the US did take ownership of an alien craft, you know the stories and movies I mean... So called eye witness reports and some leaked documents all claim certain unknown technology in great detail. Anything from fibre optics and microchips, over "intelligent metals" to light enhancing glass lenses and seemingly indestructable fibres... Some say that if we would had the option to copy and understand the technology to copy it (without knowing anything about it of course) then the tech boom of the 60' would have been instantly. Imagine flat screen TV's and smartphones with GPS 50 years ago for everyone... ;) 7. Great land in the south - Antartica... The mysteries originating from Antartica range from Atlantis over hidden civilisations and living dinosaurs to the often claimed secret Nazi base with submarines and lost technologies. We all know that life as we know it can't really exists down there, so no strange animals, ancient creatures or a possibility to sustain a secret military base some 60 years ago. Or it there more to it?? Warm lakes containing fresh water with signs of life in them have already been discovered. Same for caves under the ice with temperatures far above freezing - constantly and again with signs of life. Ages ago the continent was still joint with other and in a warmer region so no wonder to find fossils. If we already found places that sustained life for thausands of years then what living things might be down there? Maybe even a place like the Galapagos Islands but for life thought be extinct - imagine Jurassic Park for real under the ice ;) With thriving life, vulcanos, rivers, lakes and all long before the dinosaurs it is not hard to imagine the remains under the ice and carved into the mountains. In todays times it all covered by ice and the sea level is much much higher, so again not hard to imagine that there might be rivers running off under the ice and into the ocean. Some maybe even connected to lakes in a hot spot sustaining life. A secret base from some secret part of the Nazi regime over 60 years ago?? Well, with all we know today about Antartica and is also known about the technological options available at that time it is possible. A submarine could have operated for days or even a few weeks under the ice with support ships available. Not just with so called secret tech but simply with a big sub on a minimum crew and the support of crude ways to reclaim and produce oxygen. If an entrance to a river leading to a suistainable area exists or existed at that time it would have been just a matter of time and endurance to find it. Of course we can't know if it was already found and removed or used since those with capable submarines and technology these days would not talk about it ;) But private or non government explorations map and drill more than ever, so once they hit "restricted areas" or create their own base and research station under the ice we will know ;) What to do if you actually see (or think you do) a real UFO?? Grab the oldest and dirtiest camera aou can find, mount it on the end of your longest fishing pole and create the shakiest video possible. And please make no references at all that would allow to get on the loctation, time or date. Jokes aside there is a good option these days, your modern smartphone, telescope, GoPro or favourite drone. A fake is often uploaded in very bad resolution often so low you might think an old webcam was used. Good fakes are often just a rocket launch, so check for this before you claim it is of unknown origins. Modern tech allows us to record a video in 4K at 60 or even 120FPS , so no excuse for a 320x240 AVI video LOL Optical zoom causes bad results so try to avoid it if possible. Image stabilisation can do wonders for free hand shots of moving objects, so crank it to the max even if the resulting video is a bit smaller in resolution. Geotagging is also a good thing as it allows an easy reference. You might see much more with you eye than what the video show, or in the best case the other way around. That means before you upload take a step back and try too see the video like someone who was not there when it happened! Are the movements reall that impossible? Is it really not just a plane, rocket flares? What sounds did you hear at the time or shortly after that might not be audible in the video? Sometimes a plane in the distance still is in the sunlight while you already stand in the dark - keep elevation in mind ;) Compare with other videos online that claim to be taken around the same time and area - sure you did not film a rocket launch? But if your video is crystal clear and shows the impossible in great detail you might want to check for the usual markings on military aircrafts or flashing lights in green and red. Still all good and impossible to explain? Then what are you waiting for? Tell us where, when and with what type of gear and upload the video so we get evidence of unknown technologies in the use/testing or an actual UFO - Unidentified flying object, until we know better. ;) Again don't take me too serious today but enjoy some of the thoughts and let your imagination wander off a bit. Lost technologies and knowlege exists, existed, is found again - whatever you want to call it. If humans could move stone blocks the size of a small house and create them with an accuracy down to the mm then they might have known more than we think they did. If we could melt granite to form new things, manipulate its sound or carve hollow heads of just a few mm in size then again we lost something well worth knowing. If in ancient times people had no way of seeing really distant and dim stars then how were they able to accurately map them and predict their movement? If milling and lathe technology was known and used when in other parts of the world we were happy to create simple and weak tools: How was it possible to create gears and know about planetary gear systems? If the evidence of the work clearly shows advance technologies used then where are the tools used and why can we find any written records or images of it being used? If even the all mighty US military, secret agencies and space programs fail to explain what they encounter quite often since we fly around: What is really that seems to try to hide from us while appearing to watch how we evolve, explore and fight wars? Since you still bother to read all this nonsense: If it appears we have "evidence" of the existance of beings capable of flying or even space travel since the dawn of time and add all the modern evidence: Is it possible someone or something has been watching us since humans came to be? Did "they" guide some cultures at some stage during their evolution to show us modern ways of creating alloys, machine stuff or understand what was magic or the gods at that time? And if they did help our evolution in some parts then why did this greatly improved society disappear with no more trace than their stone remains? How would we react if they dare to help us again? Is there a reason that even after countless encounters noone tried to shoot one of the UFO's down? I mean, not even a claim for trying since Rosswell..... Not any evidence of a recent landing either..... Or are we just watched so closely because they want something back we too from them??? ;) I blame all spelling mistakes on my annoyingly unresponsive keyboard. But if you still find some then feel free to keep them! I still demand a fee if use them to make money from them ;)

Topic by Downunder35m    |  last reply


Monthly Make It Challenge: Big and Small!

OFFICIAL RULES PLEASE REVIEW THESE OFFICIAL RULES BEFORE ENTERING THE CONTEST. ENTRANTS WHO ARE MINORS: YOU MUST OBTAIN THE CONSENT OF YOUR PARENT OR LEGAL GUARDIAN BEFORE ENTERING THE CONTEST. ENTRY TO THE CONTEST IS FREE AND NO PAYMENT OR PURCHASE IS NECESSARY TO ENTER OR WIN. A PAYMENT OR PURCHASE WILL NOT IMPROVE YOUR CHANCES OF WINNING. VOID WHERE PROHIBITED BY LAW. PLEASE SEE THE INSTRUCTABLES TERMS OF SERVICE AND PRIVACY POLICY SECTION A - SPECIFIC TERMS FOR THIS CONTEST Sponsor. The Instructables Monthly Make It Challenge: April Fools' (the "Contest") is a skill-based contest sponsored by Instructables, Inc., a Delaware corporation ("Sponsor"), in connection with the Instructables.com website (the "Sponsor Site"). The Contest is co-sponsored by the company or companies listed here, if any (each, a "Co- Sponsor"): none. The Contest is governed by these Official Rules (these "Rules"). Overview. The object of the Contest is to create a new Instructable that shows a novelty miniature or enlarged  replica of any object. Eligibility. 1.THE CONTEST IS OPEN ONLY TO NATURAL PERSONS WHO, AT THE TIME OF ENTRY, ARE REGISTERED MEMBERS OF THE SPONSOR SITE, WHO ARE AT LEAST THIRTEEN (13) YEARS OLD, AND ARE LEGAL RESIDENTS OF THE 50 UNITED STATES (INCLUDING THE DISTRICT OF COLUMBIA BUT EXCLUDING PUERTO RICO), CANADA (EXCLUDING THE PROVINCE OF QUEBEC, CANADA), UNITED KINGDOM, OR AUSTRALIA. 1.If you are a minor, meaning that you are under the age of majority in your jurisdiction (currently 18 or 19 in most U.S. states and provinces of Canada and Australia, and, for the UK, 16 in Scotland and 18 in most other parts of the United Kingdom), you must obtain permission from your parent or legal guardian, and your parent or legal guardian must consent to these Rules as if he or she were an entrant, before you submit an entry. Sponsor reserves the right to require minors to submit proof of parental/guardian permission and consent to these Rules at any time, without which they may be immediately disqualified from the Contest. Certain individuals are excluded from eligibility to enter or win, as described in Section B below. No purchase is necessary to enter the Contest. Deadline. The Contest begins at 12:00 a.m. Pacific Time (PT)/8AM GMT on April 16/April 17 (the "Start Date"). Entries for the Contest must be received by Sponsor by 11:59 p.m. PT on May 20, 2012/7:59am GMT on May 21, 2012(the "Deadline"). How to Enter. All entries must comply with the entry requirements identified in these Rules (including in this Section and in Section B below), as well as with any specific formatting or content requirements identified in Section A.2 above or on the "How to Enter" page https://www.instructables.com/id/Monthly-Challenge-Big-and-Small/ or the Contest on the Sponsor Site. It is each entrant's responsibility to ensure compliance with those requirements. To enter a new project in the Contest, follow these steps: First document your project in Step-by-Step or Photo Instructable format. When your project is ready to be published to the Sponsor Site, visit the Sponsor Site and follow the instructions for publishing your project to the Sponsor Site. You must be a registered user of the Sponsor Site in order to publish a project to the Sponsor Site. If you are not already a registered user of the Sponsor Site, you will be prompted to create an account on the Sponsor Site during the publication process. Please note: in some jurisdictions, the publication of your project on the Sponsor Site could materially affect rights (e.g., adversely affect patent rights), you may own in the project. You should make your own inquiries and seek your own advice on this issue. When you have published your project to the Sponsor Site, if you have reviewed the entry requirements for the Contest, believe your project qualifies for entry, and want to enter it in the Contest, leave a comment on the Contest page, and include a link to your published Instructable. Instructable must be published during the Contest period. You may not enter the same Instructables project in more than three (3) Instructables contests in total. Projects published prior to the Start Date are not eligible for entry. You may not register the same Instructables project in more than three (3) Instructables contests in total. Further information about entry can be found in Section B below. Winner Selection. There can be up to 11 possible winning entries, depending on the number of eligible entries. The winning entries will be selected on or around May 22, 2012 and Sponsor will announce the winner(s) on or around May 24, 2012. There must be a minimum of the number of eligible entrants described for each tier listed below for it to be awarded. Each winner will be awarded only the applicable prize according to the following: Prize(s). Tier #2: If there are at least 10 but no more than 24 entries, the winner will be awarded a prize package including a 1-year Instructables Pro membership, a Sugru sample pack, a robot USB flash drive and an Instructables robot t-shirt.  Approximate retail value: $90, £58; or Tier #3: If there are at least 25 but no more than 49 entries, the entrant with the highest judges’ score will be awarded a prize package including a Air Swimmers Bundle (with helium tank), a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables robot t-shirt.  Approximate retail value: $140, £ 90.  The entrants with the next 3 highest judges’ scores will each be awarded a prize package including a 1-year Instructables Pro membership, a Sugru sample pack, a robot USB flash drive and an Instructables robot t-shirt.  Approximate retail value of each prize package: $90, £58; or Tier #4: If there are at least 50 but no more than 99 entries, the entrant with the highest judges’ score will be awarded a prize package including a GoPro HERO 1 HD camera, a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables robot t-shirt.  Approximate retail value: $350, £234.  The entrants with the next 5 highest judges’ scores will each be awarded a prize package including a 1-year Instructables Pro membership, a Sugru sample pack, a robot USB flash drive and an Instructables robot t-shirt.  Approximate retail value of each prize package: $90, £58; or Tier #5: If there are 100 or more eligible entries, the entrant with the highest judges’ score will be awarded a prize package including an iPad 2, a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables robot t-shirt.    Approximate retail value: $565, £ 365.15. The entrants with the next 10 highest judges’ scores will each be awarded a prize package including a 1-year Instructables Pro membership, a Sugru sample pack, a robot USB flash drive and an Instructables robot t-shirt.  Approximate retail value of each prize package: $90, £58. With respect to any prizes that include any gift cards, pre-paid debit cards,  similar cards, or any other items or services that are subject to third party terms and conditions or restrictions, acceptance and use of the prizes are subject to all eligibility criteria, expiration dates, service or dormancy fees, and all other terms and conditions (if any) imposed by the issuer of such cards, items or services. Neither Sponsor, nor any Co-Sponsor, nor any of their affiliates is the issuer of any such cards, items or services, and none of them are responsible for establishing those terms and conditions, for disclosing or explaining any of those terms and conditions to entrants, or for any winner's failure to comply with any of them.  If a winner does not comply with all of those terms and conditions, the winner may not be able to obtain the maximum value, or any value, from his or her prize. The estimated retail value of all prizes to be awarded in the Contest depends on the number of eligible entries and is between: $50 - $1,215, £ 33.21 - £ 785.24. Judging. 1.Entries will be judged on the basis of the following criteria (the "Criteria"):  relevance, originality, usefulness, simplicity, and clarity of instructions, each of which will be given equal weight.  Entrants will be judged by Mike Warren (mikeasaurus). Further information on the steps and process of voting and judging can be found in Section B below. Odds of Winning. The odds of winning a prize depend on the number of eligible entries received between the Start Date and the Deadline and the quality of each entry as evaluated by the Judge in the manner described above.  The number of entries received, and the number of winners chosen, in prior contests of Sponsor, including the three (3) most recently completed contests, can be found through the "Contests" page of the Sponsor Site, which can be found here instructables.com/contest.  The number of eligible entries for Sponsor's recently completed contests generally has ranged from approximately two (2) to approximately eighty-three (83), and generally has averaged approximately forty (40), but Sponsor cannot predict or guarantee any specific number of eligible entries for the Contest.   Judging. Entries will be judged on the basis of the following criteria (the "Criteria"): relevance, originality, usefulness, simplicity, and clarity of instructions, each of which will be given equal weight. Entrants will be judged by mikeasaurus. Further information on the steps and process of voting and judging can be found in Section B below. Odds of Winning. The odds of winning a prize depend on the number of eligible entries received between the Start Date and the Deadline and the quality of each entry as evaluated by the Judge in the manner described above. The number of entries received, and the number of winners chosen, in prior contests of Sponsor, including the three (3) most recently completed contests, can be found through the "Contests" page of the Sponsor Site, which can be found here instructables.com/contest. The number of eligible entries for Sponsor's recently completed contests generally has ranged from approximately two (2) to approximately eighty-three (83), and generally has averaged approximately forty (40), but Sponsor cannot predict or guarantee any specific number of eligible entries for the Contest. SECTION B - ADDITIONAL TERMS FOR THIS CONTEST General Conditions. By entering the Contest, each entrant agrees to abide by the terms of these Rules and by the decisions of Sponsor and the Judges, which shall be made in all cases in their sole and absolute discretion and are final and binding on all matters relating to the Contest. The Contest is governed by the laws of the State of California and applicable United States federal law, without regard to any conflicts of laws principles. The Contest is void where prohibited by law. The Contest is also governed by Sponsor's Privacy Policy, and other policies (collectively, the "Policies") pertaining to the Sponsor Site, although the Rules will govern any conflict between the Privacy Policy and the Rules. Exclusions from Eligibility. Employees of Sponsor, any Co-Sponsor, or their respective parents, subsidiaries, affiliates, partners, suppliers, or advertising or promotional agencies (including without limitation any Judges who are employees of Sponsor, any Co-Sponsor or any of their respective parents, subsidiaries, or affiliates), as well as members of their households or their immediate families, may submit entries in the Contest, but any such entries are for information and entertainment purposes only and are not eligible to be considered for the purpose of selecting finalists or winners. Judges who are not employees of Sponsor, any Co-Sponsor or any of their respective parents, subsidiaries, or affiliates, are not eligible to enter or win, nor are members of their households or their immediate families. Entry. 1.Multiple entries are permitted, but only one entry per entrant can win a prize in the Contest. Entrants must be registered users of the Sponsor Site to enter the Contest. Registering for an account with the Sponsor Site may require each entrant to submit entrant's name, e-mail address, age or date of birth, and other details, and in the case of a minor, contact details for a parent or legal guardian for purposes of obtaining proof of parental consent, if Sponsor elects to do so. Entries can be the work of more than one person, but for purposes of the Contest, each entry will belong to the "Primary Author" named in the entry, regardless of the number of contributors to that entry. For winning entries, Sponsor will award the applicable prize to the named entrant only, and will not be responsible or liable for apportioning any prize among contributors to a winning entry. Upon submission, all entries become subject to the Policies (including without limitation the provisions regarding ownership and use of user submissions as stated in the Terms of Use https://www.instructables.com/tos.html). Entries will not be acknowledged or returned. Entrants are permitted to modify or update an entry after submission, but are not permitted to do so after the Deadline. Entries may remain posted on the Contest page of the Sponsor Site indefinitely following the Deadline, but Sponsor reserves the right to delete entries from the Contest page after the Contest ends, in its discretion. Entries may not be created or submitted through any software-generated, robotic, programmed, script, macro, or other automated method. Sponsor and Co-Sponsor will have no responsibility for, and will have the right to refuse in its discretion, any entries that have been tampered with, or entries that are misdirected, incomplete, non-conforming, corrupt, lost, late, or ineligible, whether due to Internet or e-mail server failure or otherwise. Proof of transmission of an entry shall not constitute proof of receipt. It is each entrant's responsibility to keep Sponsor informed of any changes to entrant's contact or other information during the Contest. Additional Entry Requirements. Each entry must comply in all respects with the Policies, including without limitation all requirements for user submissions, as stated in the Terms of Use https://www.instructables.com/tos.html for the Sponsor Site. Without limiting that requirement, each entry also must comply with the following: Each entry must be entirely the original work of the persons identified in the entry; If persons other than the entrant have contributed to an entry, the entrant must have the permission from each contributor prior to submitting the entry; Entries must not have been published prior to the Start Date; Entries must not have been entered in more than two other previous contests of Sponsor; Entries must not contain anything that is or may be: (i) threatening, harassing, degrading or hateful; (ii) defamatory; (iii) fraudulent or tortious; (iv) obscene, indecent or otherwise objectionable; or (v) protected by copyright, trademark or other proprietary right without the express prior consent of the owner of such right; and Entries must not contain any material that would give rise to criminal or civil liability or that encourages conduct that constitutes a criminal offense. Judging Process. The winner(s) will be determined by the Judges, who will apply the Criteria to evaluate entries. The entries with the highest score(s) will be selected as the winner(s), and the number and type of winners will be as identified in Section A above. The Judges have the right to disqualify any entry that is not in compliance with these Rules, in the Judges' discretion. In the event that a winning entry is disqualified, the next-highest scoring entry will be selected as the alternate winner. In the event that one or more of the identified Judges is unavailable, Sponsor reserves the right to substitute Judges of comparable qualification, to be determined by Sponsor in its discretion. Prize Terms All values are stated in United States dollars or British Pound Sterling as indicated. If a stated prize is unavailable, Sponsor has the right to substitute one or more items of equal or greater value, in its discretion. No prize is exchangeable, transferable, or redeemable for cash. The winner(s) will be solely responsible for complying with any and all applicable statutes, laws (including, without limitation, common law), rules and regulations and for bearing any personal income, VAT, withholding taxes, customs duties, or other taxes, fees, insurance, surcharges or other costs relating to any prize. THE PRIZE(S) WILL BE GIVEN AWAY BY SPONSOR AND ANY CO-SPONSOR(S) "AS IS." SPONSOR AND ANY CO-SPONSORS DO NOT MAKE, AND EXPRESSLY DISCLAIM, ANY WARRANTY, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING ANY PRIZE OR PORTION THEREOF, INCLUDING WITHOUT LIMITATION ANY IMPLIED OR STATUTORY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-INFRINGEMENT. SOME JURISDICTIONS MAY NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, CONSUMER GUARANTEES AND SIMILAR RIGHTS, IN WHICH CASE SUCH EXCLUSION SHALL APPLY ONLY TO THE EXTENT PERMITTED BY APPLICABLE LAW IN THE RELEVANT JURISDICTION. WITHOUT LIMITATION, TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, ALL WARRANTIES AND REPRESENTATIONS, IN RELATION TO THE PRIZES, WHETHER EXPRESS OR IMPLIED BY STATUTE, LAW (INCLUDING, WITHOUT LIMITATION, COMMON LAW), RULE, REGULATION OR OTHERWISE, ARE HEREBY EXCLUDED. Announcement; Award of Prize(s). 1. The winner(s) will be notified by e-mail within seven (7) days of selection. The winner(s) (and, if a winner is a minor, the winner's parent or legal guardian) may be required to sign a declaration of eligibility and/or publicity and/or liability release form, to the extent not prohibited by law, prior to receipt of a prize. The winner(s) must take possession of the prize(s) as directed by Sponsor. The winner(s) may be required to provide Sponsor with a social security or taxpayer identification number for tax purposes. The winner(s) also may be required to provide Sponsor with proof that he or she is the Authorized Account Holder of the e-mail address associated with the winning entry. An "Authorized Account Holder" is the natural person who is assigned to an e-mail address by an Internet access provider or other organization responsible for assigning e-mail addresses to the domain associated with an e-mail address. In the event of a dispute, an entry will be deemed to have been submitted by the Authorized Account Holder of the e-mail address submitted at the time of entry. Failure to respond to a winner announcement, or return any required declarations or releases within seven (7) days (or any longer time specified by Sponsor) or to comply with any of the foregoing may result in disqualification and the selection of an alternate winner. It is Sponsor's policy to assist government employees in meeting their obligations under their Standards of Ethical Conduct; any prize(s) won in violation of those Standards should not be accepted and should be returned at Sponsor's expense or destroyed. Representations. 1.By entering the Contest, each entrant represents and warrants that: (a) the entrant meets all eligibility requirements of the Contest; (b) in entering and participating in the Contest, the entrant has complied and will comply in all respects with these Rules and all applicable statutes, laws (including, without limitation, common law), rules and regulations; and (c) the information provided in the entrant's entry, including without limitation all contact information, is true, accurate, and complete in all respects. Assumption of Risk. By taking any action to create an entry for the Contest, each entrant, on his or her own behalf and on behalf of his or her personal representatives, heirs, executors, and assigns, acknowledges and agrees that: (a) THERE MAY BE DANGER AND RISK OF BODILY INJURY, DEATH, OR PROPERTY DAMAGE INVOLVED IN CREATING AN ENTRY; (b) THESE RISKS AND DANGERS MAY ARISE FROM FORESEEABLE OR UNFORESEEABLE CAUSES; (c) SUCH ENTRANT AND HIS OR HER PERSONAL REPRESENTATIVES, HEIRS, EXECUTORS, AND ASSIGNS ASSUME ALL RISKS AND RESPONSIBILITY FOR ANY PERSONAL INJURY, DEATH, PROPERTY DAMAGE, OR OTHER LOSS ARISING OUT OF THE CREATION OF ANY ENTRY, WHETHER CAUSED BY NEGLIGENCE OR ANY OTHER CAUSE; and (d) such entrant and his or her personal representatives, heirs, executors, and assigns are relinquishing any and all rights he, she, or they now have or may have in the future to sue or take any other action against Sponsor, any Co-Sponsor, the prize manufacturers, any other entities involved in the administration of the Contest, each of their respective parents, subsidiaries, and affiliates, and each of their respective officers, directors, employees, agents, and representatives (the “Sponsor Parties”) on the basis of any injury, death, damage, or other loss that may be suffered arising from any action taken in the creation of any entry, including but not limited to claims based on allegations of negligence by any of the Sponsor Parties. Release. To the maximum extent permitted by law, by entering the Contest, each entrant releases and holds harmless the Sponsor Parties from any and all responsibility, liability, damages (including, without limitation, direct, indirect, incidental, consequential, punitive, statutory, and other damages), losses, costs, or expenses of any kind arising out of or relating to: (a) entry or participation in the Contest, including but not limited to disputes among individuals claiming to have contributed to any winning entry; (b) any violation by the entrant of these Rules, the Policies, or applicable laws; (c) misappropriation, infringement, or other violation of any copyright, trademark, patent, trade secret, right of publicity, privacy, or other legal or contractual right of any person attributable to entrant or any entry submitted by entrant; (d) the acceptance, possession, receipt, or use of any prize or any item purchased with any prize (e.g., if the prize includes a gift card); (e) any entries or votes that have been tampered with or that are misdirected, incomplete, non-conforming, corrupt, lost, late, or ineligible; (f) any problems or technical malfunctions (including but not limited to errors, omissions, interruptions, deletions, defects, or delays in operation or transmission) of any computer, telephone, modem, cable, satellite, network, hardware, online system, server, software, or other equipment or provider, including any incorrect, incomplete, garbled or jumbled information resulting therefrom; (g) any Internet traffic congestion or website accessibility or delays; (h) printing or typographical errors in any Contest-related materials; or (i) any other technical or human error that may occur in connection with the Contest (the “Causes”). If anyone makes any claim against any of the Sponsor Parties arising out of or relating to any of the Causes attributable to the entrant, the entrant will pay for any damages, losses, liabilities, costs, penalties, and expenses, including without limitation attorneys’ and experts’ fees and costs, incurred in connection with such claim. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THE SPONSOR PARTIES SHALL NOT BE LIABLE FOR ANY LOST PROFITS OR ANY SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE CONTEST, HOWSOEVER CAUSED, WHETHER ARISING IN STATUTE, TORT, CONTRACT, OTHER LEGAL THEORY OR OTHERWISE, AND ALL SUCH DAMAGES ARE HEREBY DISCLAIMED AND EXCLUDED. SOME JURISDICTIONS MAY NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR DAMAGES AND OTHER LIABILITY (INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES) IN WHICH CASE SUCH LIMITATION OR EXCLUSION SHALL APPLY ONLY TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, RULE, STATUTE OR REGULATION IN THE RELEVANT JURISDICTION. NOTHING IN THESE TERMS EXCLUDE LIABILITY FOR FRAUD, OR FOR PERSONAL INJURY OR DEATH CAUSED BY NEGLIGENCE TO THE EXTENT SUCH EXCLUSION IS PROHIBITED BY APPLICABLE LAW. Misconduct. Sponsor reserves the right, in its discretion, to disqualify any entrant who: (a) tampers with the entry or voting process, the operation of the Contest, the Sponsor Site, or affiliated websites; (b) acts in an unsporting or disruptive manner, or with intent to annoy or harass another person; (c) is otherwise in violation of these Rules, the Policies, or any applicable laws; or (d) attempts to subvert the letter and/or spirit of these Rules. SPONSOR RESERVES THE RIGHT TO SEEK DAMAGES FROM ANY SUCH PERSON TO THE FULLEST EXTENT PERMITTED BY LAW. Termination. 1.Sponsor reserves the right to suspend, modify, or terminate the Contest at any time for any reason, in its discretion, including without limitation in the event of fraud, abuse, tampering, technical, administrative, financial, or other difficulties. In such cases, Sponsor will post a notice on the Contest page of the Sponsor Site. Should the Contest terminate prior to selection of the winner, Sponsor will announce an alternate means of awarding the prize on the Contest page of the Sponsor Site. Advertising. By entering the Contest, each entrant grants to Sponsor the rights to use his or her entry as provided in the Policies, including without limitation the provisions of the Terms of Use https://www.instructables.com/tos.html regarding ownership and use of user submissions.WITHOUT LIMITING THE FOREGOING, TO THE MAXIMUM EXTENT PERMITTED BY LAW, BY ENTERING THE CONTEST, EACH ENTRANT CONSENTS, AND WARRANTS THAT IT HAS OBTAINED THE WRITTEN CONSENT OF EVERY CONTRIBUTOR TO THE ENTRY, TO THE USE BY SPONSOR, ANY CO- SPONSOR, OR ANY THIRD PARTY CHOSEN BY SPONSOR OR ANY CO-SPONSOR, OF ANY AND ALL INFORMATION, DRAWINGS, TEXT, PHOTOS, VIDEOS, OR OTHER MATERIAL CONTAINED IN AN ENTRY OR OTHERWISE PROVIDED BY SUCH ENTRANT RELATED TO THE CONTEST, INCLUDING ANY PERSONAL INFORMATION OBTAINED THROUGH THE CONTEST, FOR ADVERTISING, MARKETING OR ANY OTHER PURPOSES NOT PROHIBITED BY LAW. Otherwise, each entrant retains whatever rights it may have in each entry to the extent provided in the Policies. To the maximum extent permitted by law, by accepting a prize, a winner consents on his or her own behalf and on behalf of any contributor to the entry, to the print and online publication of the winner's user name, first and last name, address, and winning entry as part of the official winner's list and also to the use of his or her winning entry, first and last name, user name, voice, photograph, biographical material, and likeness by Sponsor, any Co-Sponsor, or any third party chosen by Sponsor or any Co-Sponsor, for advertising, marketing, and other purposes without additional compensation. Other than as set forth herein, Sponsor will treat any personal information supplied by entrants in connection with the Contest in accordance with Sponsor's Privacy Policy https://www.instructables.com/about/privacy.jsp. Miscellaneous. Other than for entrants who are U.K. residents, Sponsor, any Co-Sponsor, and each entrant agree to the non-exclusive jurisdiction of an appropriate state court in Marin County, California, or an appropriate federal court located in San Francisco, for any action or proceeding arising out of or related to these Rules, the Contest, or any prize. For U.K. residents: these Rules are governed by the Laws of England and Wales, and Sponsor, any Co-Sponsor, and each entrant agree to the non-exclusive jurisdiction of the courts in England in connection with any action or proceeding arising out of or related to these Rules, the Contest, or any prize. By entering the Contest, each entrant submits to the jurisdiction of those courts and waives any objection to those courts, whether on the basis of jurisdiction, venue, inconvenience of the forum, or otherwise. If any part of these Rules is held by a court of competent jurisdiction to be invalid, illegal, or otherwise unenforceable, such part will be modified by such court to the minimum extent necessary to make it enforceable while preserving to the maximum extent possible the original intent of Sponsor, and the remaining parts of these Rules will remain in full force and effect. Nothing contained herein or in any of the Contest related materials should be construed as an endorsement by Sponsor of any Co-Sponsor, or of Sponsor or any Co-Sponsor of any third party, product, or service. Winner's List; Mailing List. The user name(s) and entries of the Contest winner(s) will be posted on the Contest page of the Sponsor Site, within thirty (30) days of awarding of all prizes. In addition, the names of the winner(s) may be obtained by sending a written request and a self-addressed, stamped envelope to the below address (requests must include the words "WINNER'S LIST" and the full name of the Contest prominently in the first line of the address): Instructables 82 2nd St. San Francisco, California 94105 USA All such requests must be received within six (6) months of the Deadline. Sponsor's telephone number for Contest purposes is (01-510-473-7626). Entrants who opt to join Sponsor's electronic mailing list agree to be contacted by email by Sponsor. Requests for removal from Sponsor's mailing list may be made as instructed in any such email, or by sending a written request and a self-addressed, stamped envelope to "Instructables Mailing List" at the above address, by calling the above telephone number, or as otherwise indicated on the Sponsor Site. Residents of Vermont may omit return postage on winner's list and mailing list requests. © 2011 Instructables, Inc. All rights reserved. INSTRUCTABLES is a registered trademark of Instructables, Inc. Other brands may be trademarks of their respective owners.

Topic by mikeasaurus