Jewelry Contest

Is there jewelry contest limited to jewelry you wear on your neck...wrist..finger?  Or can hair things be added to this list?? I've attached an example. Thank ya!!

Topic by JosiePosie76 6 years ago  |  last reply 5 years ago


[Jewelry] Resources

Post your jewelry making resources here. Please, only links to suppliers or instructions, tips, techniques, etc.Jewelry Group

Topic by kqrpnb 12 years ago  |  last reply 5 years ago


[Jewelry] Examples

Post examples of your work, or others', here.Jewelry Group

Topic by kqrpnb 12 years ago  |  last reply 12 years ago


adhesive suggestions for jewelry

What glue/adhesive do you use for fastening jewels/metal to brooch settings, fabric, and other jewelry? Thanks for your help :)

Topic by rististien 7 years ago  |  last reply 7 years ago


Jewelry tools for sale

My boss recently purchased all the tools from a jewelry shop that was going out of business and subsequently has a lot of tools that he is parting with. While these are primarily jewelry tools many of them are perfect for prop building. He has some nice workbenches, casting equipment, benchtop laser welder, a large polishing station, plating rectifier, rolling mills, benchtop lathe, flexshaft motors/handpieces, microscopes, engraving tools and all kinds of small hand tools. There's too much to list here- I have a complete listing of everything with photos and pricing. Some of this equipment is pretty big/heavy so local pickup would be preferred (Boulder, Colorado) but he said he'll ship equipment if need be. After downloading and viewing the list if there are any questions just message me and I'll try to answer them as best as possible or have my boss email you. Thanks!

Topic by Honus 7 years ago  |  last reply 1 year ago


champagne topper jewelry

On our wedding night my wife and I had a bottle of Vieve Cliquot champagne. I still have the topper that holds the cork to the bottle. I can imagine it being made into a bracelet or pendant for my wife but would have no idea how to go about it. If anybody has any ideas I would appreciate it. The topper has a portrait of the widow cliquot on it and reminds me of a cameo. Our five year anniversary is coming at the end of this month and I would love to make her something out of this for it.

Topic by owenclift 7 years ago  |  last reply 7 years ago


Steampunk Jewelry for sale

With the success of my SteamPunk Jewelry Instructable, I have decided to list my jewelry in my Etsy store. I'm quite pleased with the sales so far. Have a look, won't you? Toast Arts on Etsy. I am in the process of cleaning up my Lego Octopus prototype for sale in my store, as well. Stay tuned for those additions and others. Cheers, Tater. P.S. Or you can always build your own. Haha.

Topic by Tater Zoid 4 years ago  |  last reply 4 years ago


Jump rings for jewelry? Answered

I recently bought a jump ring maker at hobby lobby but the best wire i can find it aluminum wire. i need something that i can make small jump rings with, not expensive, can be bought in a store, and is stiff. any help here please?

Question by darkria 45 8 years ago  |  last reply 8 years ago


Jewelry Box Kits

I'm looking for feedback from the DIY crafting/woodworking community. I'd like to know what you all think of our artisan designed jewelry box kits. I've looked around and what I've seen in this market is pretty slim pickin's. Our kits don't require a shop full of tools, just what the average homeowner might have in his/her tool chest. There is also a short list of supplies. The kits require no cutting or power tools at all. The things that are required are self confidence, a sense of excellence and attention to detail. Our company is called Ready To Build. I have designed every box and we make absolutely everything in-house. It would be great if you would check out the website and give us any feedback or ask questions. Thanks!

Topic by aunt alice 7 years ago  |  last reply 5 years ago


jewelry box fittings

I am making my daughter a wooden jewelry box and want to spiff it up with brass fittings - corners, edges, etc. I can't find a supplier. All local stores have cabinet fittings ( drawer pulls, hinges, etc.). Any suggestions? If I bought thin brass sheets would I need special tools to make my own fittings? i want nice sharp 90 degree angles and curved edges.

Topic by lhomeniuk 7 years ago  |  last reply 7 years ago


Question about jewelry repair

I do simple jewelry repair,and want to learn how to solder.What tools do I need for this?I have a Dremel tool and several hand tools.Please be specific.

Question by jeannie13 10 years ago  |  last reply 10 years ago


How to make a jewelry giftbox??

Question by whitedesigns 10 years ago  |  last reply 10 years ago


Links to cheap jewelry webshops???

Please, send me weblinks to cheap webshops for jewelry. I really love making my own jewelry but I can't find any cheap stores. By sending the links, you actually support me in making more jewelry instructables :) An example of a necklace I have made: https://www.instructables.com/id/mulicoloured-pendant/

Topic by emilyvanleemput 7 years ago  |  last reply 5 years ago


123D Jewelry Contest missing

The 123D  jewelry contest has been missing from the contest page for 2 days. I can still access the page if I use the link on my "you page" where my entry is listed.  The judging was supposed to be over on the 17th (after it was changed from the 15th). When the judging started, I saw that one of my ibles was a finalist, but did not receive an email from Jessyratfink alerting me to this as I have with several other recent contests. My finalist entry has an award icon on it and it has not won any other contests.  All of these things are odd, and I was just wondering...What's up with the jewelry contest?

Topic by Brooklyntonia 5 years ago  |  last reply 5 years ago


Jewelry Design App Ideas?

Our group at Autodesk is thinking about making an app to help people design custom jewelry, since the current options are slow, expensive, and hard to use.  If you've made your own jewelry or worked with a pro to have a custom piece made, our summer intern Kristen would love to pick your brain for 15-30 minutes to learn what features would be most useful to you in a jewelry app. If that sounds like fun, just reply here and Kristen will contact you to set up a phone or Skype chat.  Thanks!

Topic by canida 5 years ago  |  last reply 4 years ago


YiWu QQ Jewelry Accessories

Hello! I was wondering if anybody did any business with YiWu QQ and so on and if there's some place where I can get their stuff or stuff similar to it that doesn't come in a package of 100 pieces, because that's a tad too many for me :) Thanks for the help!

Topic by TashaDax 6 years ago  |  last reply 5 years ago


New group for jewelry makers

Hi all, I started a group for jewelry makers.

Topic by kqrpnb 12 years ago  |  last reply 12 years ago


Ballerina Jewelry Box Project

Hello, I am interested in creating a jewelry box for my niece. The idea is to laser-cut a custom box which I think I can find templates of online and create an SVG file with some art for the laser cutter. I plan to 3D print a ballerina as well. I initially thought of running the electronics with Arduino - but prefer to keep it simple.  I want to have a custom song/melody playing - I was thinking of perhaps some sort of a recording/playback speaker where I can record the song initially and then have it play back - ideas? For simplicity - do you think it is possible to run a simple circuit with a couple AA/AAA batteries, a hinge control (ideas for something that will do the trick and act as a switch are very much welcome too), a speaker, and some sort of a stepper motor/servo to spin the ballerina. I would love to get some ideas and supplies from you. This should be a pretty straightforward, simple project but I don't have much electronic experience and am not sure what to search to find the technology I need. Thank you, KoMoDo

Topic by KoMoDo 2 years ago  |  last reply 2 years ago


whats a cool way to store jewelry?

I need a cool way to store jewelry and keep it both functional and displaying. my jewelry is like art so i kind of want it shown off as well as organized.

Question by 10 years ago  |  last reply 9 years ago


How to make natural flower jewelry? Answered

I have searched everywhere and cannot get any info on this. I am trying to get instructions on aking real (natural) rose & natural flower and leaf jewelry. I have seen these for sale, but there is never any info on how to do it. They are still in their 3d shape and some even remain soft and pliable. I think it is down with resin , poly resin, or acrylic. An example can be seen at: www.firemountain.com after you reach the website, in the search box enter item # H20-7497JW I am also posting a photo for you to see. As I said, there is NOTHING on any sites with instructions. Thanks so much, Patti Meadows

Question by Botanical Blessings 10 years ago  |  last reply 6 years ago


how long does it take resin jewelry to harden after putting it in the mold?

Question by 10 years ago  |  last reply 10 years ago


Is there a Dremel drill bit (maybe diamond?) ideal for drilling very small holes in pebbles to make jewelry?

 Is such a drill obtainable in Canada through Home Depot or similar company? How much?

Question by 9 years ago  |  last reply 6 years ago


Resize 6mm platinum wedding band, reduce from 11 to 9.5

Question by hairybrut 7 years ago  |  last reply 6 years ago



How can I make a small rolling mill for my silver, the ones sold commercially are way out of my budget? Answered

I want to make a rolling mill that is adjustable and will roll out silver for silversmithing. It dosen't have to be elaborate just strong.

Question by meandmytreasures 9 years ago  |  last reply 8 years ago


Links to cheap jewelry (web)shops???

Please, send me links to cheap jewelry webshops!!!!! I love making jewelry :) but i just don't know any cheap webshops:( A real shop is also fine, but they must be also located in the Netherlands or in Belgium please, help me

Topic by emilyvanleemput 7 years ago  |  last reply 7 years ago


Jewelry - Salvaged Barbie Doll Parts

This is one of the more unique re-purposed jewelry ideas that I have seen.  At first I thought the faces and body parts were photos or maybe paintings.   However, the interesting and comical compositions are created using Barbie parts! The Plastic Body Series designed by Margaux Lange is a jewelry line that combines salvaged Barbie doll parts with sterling silver and pigmented resins. You actually HAVE to check out this link; I am so amused by this!

Topic by Carleyy 8 years ago  |  last reply 8 years ago


how to wire wrap jewelry making?

Instruction on how to make jewelry bu wire wrapping sharks teeth and miscellanous items

Question by 10 years ago  |  last reply 8 years ago


Is there any way to de-magnetize jewelry?

I left some jewelry sitting on top of my microwave, and when I picked it up again, it was magnetized. Is there any way to demagnetize it, or undo this? Thanks!

Question by 10 years ago  |  last reply 9 years ago


Official Rules, Scoochmaroo Challenge: Jewelry

OFFICIAL RULES PLEASE REVIEW THESE OFFICIAL RULES BEFORE ENTERING THE CONTEST. ENTRANTS WHO ARE MINORS: YOU MUST OBTAIN THE CONSENT OF YOUR PARENT OR LEGAL GUARDIAN BEFORE ENTERING THE CONTEST. ENTRY TO THE CONTEST IS FREE AND NO PAYMENT OR PURCHASE IS NECESSARY TO ENTER OR WIN. A PAYMENT OR PURCHASE WILL NOT IMPROVE YOUR CHANCES OF WINNING. VOID WHERE PROHIBITED BY LAW. PLEASE SEE THE INSTRUCTABLES TERMS OF SERVICE AND PRIVACY POLICY SECTION A - SPECIFIC TERMS FOR THIS CONTEST Sponsor. The Instructables Scoochmaroo Challenge: Jewelry (the "Contest") is a skill-based contest sponsored by Instructables, Inc., a Delaware corporation ("Sponsor"), in connection with the Instructables.com website (the "Sponsor Site"). The Contest is co-sponsored by the company or companies listed here, if any (each, a "Co-Sponsor"): none. The Contest is governed by these Official Rules (these "Rules"). Overview. The object of the contest is to create an Instructable that has something to do with Jewelry. Eligibility. 1.THE CONTEST IS OPEN ONLY TO NATURAL PERSONS WHO, AT THE TIME OF ENTRY, ARE REGISTERED MEMBERS OF THE SPONSOR SITE, WHO ARE AT LEAST THIRTEEN (13) YEARS OLD, AND ARE LEGAL RESIDENTS OF THE 50 UNITED STATES (INCLUDING THE DISTRICT OF COLUMBIA BUT EXCLUDING PUERTO RICO),  CANADA (EXCLUDING THE PROVINCE OF QUEBEC, CANADA), UNITED KINGDOM, OR AUSTRALIA. 1.If you are a minor, meaning that you are under the age of majority in your jurisdiction (currently 18 or 19 in most U.S. states and provinces of Canada and Australia, and, for the UK, 16 in Scotland and 18 in most other parts of the United Kingdom), you must obtain permission from your parent or legal guardian, and your parent or legal guardian must consent to these Rules as if he or she were an entrant, before you submit an entry.  Sponsor reserves the right to require minors to submit proof of parental/guardian permission and consent to these Rules at any time, without which they may be immediately disqualified from the Contest. Certain individuals are excluded from eligibility to enter or win, as described in Section B below.  No purchase is necessary to enter the Contest. Deadline. The Contest begins at 12:00 a.m. Pacific Time (PT)/8AM GMT on March 5, 2012 (the "Start Date"). Entries for the Contest must be received by Sponsor by 11:59 p.m. PT on March 11, 2012 /7:59am GMT on March 12, 2012 (the "Deadline"). How to Enter. All entries must comply with the entry requirements identified in these Rules (including in this Section and in Section B below), as well as with any specific formatting or content requirements identified in Section A.2 above or on the "How to Enter" page https://www.instructables.com/id/DIY-Jewelry/ for the Contest on the Sponsor Site. It is each entrant's responsibility to ensure compliance with those requirements. To enter a new project in the Contest, follow these steps: First document your project in the step-by-step or photo,Instructables format. When your project is ready to be published to the Sponsor Site, visit the Sponsor Site and follow the instructions for publishing your project to the Sponsor Site.  You must be a registered user of the Sponsor Site in order to publish a project to the Sponsor Site. If you are not already a registered user of the Sponsor Site, you will be prompted to create an account on the Sponsor Site during the publication process. Please note: in some jurisdictions, the publication of your project on the Sponsor Site could materially affect rights (e.g., adversely affect patent rights), you may own in the project.  You should make your own inquiries and seek your own advice on this issue. When you have published your project to the Sponsor Site, if you have reviewed the entry requirements for the Contest, believe your project qualifies for entry, and want to enter it in the Contest, leave a comment on the Contest page, and include a link to your published Instructable. Instructable must be published during the Contest period. You may not enter the same Instructables project in more than three (3) Instructables contests in total. Projects published prior to the Start Date are not eligible for entry.  You may not register the same Instructables project in more than three (3) Instructables contests in total. Further information about entry can be found in Section B below. Winner Selection. There can be up to 21 possible winning entries, depending on the number of eligible entries. The winning entries will be selected on or around March 13, and Sponsor will announce the winner(s) on or around March 13, 2012. There must be a minimum of the number of eligible entrants described for each tier listed below for it to be awarded.  Each winner will be awarded only the applicable prize according to the following: Prize(s). Tier #1: If there are at least 5 but no more than 9 eligible entries, the winner will be awarded a prize package including a 1-year Instructables Pro membership, and a Sugru sample pack.  Approximate retail value: $44, £ 27.98; or Tier #2: If there are at least 10 but no more than 24 entries, the entrant with the highests judges' score will be awarded a prize package including a Leatherman Juice, 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables t-shirt.  Approximate retail value: $99, £ 62.95. The entrants with the next 3 highest judges’ scores will each be awarded a prize package including a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables t-shirt.  Approximate retail value of each prize package: $59, £ 37.51; or or Tier #3: If there are at least 25 but no more than 49 entries, the entrant with the highest judges’ score will be awarded a prize package including a Dremel Rotary Tool, a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables t-shirt.  Approximate retail value: $127, £ 80.75. The entrants with the next 5 highest judges’ scores will each be awarded a prize package including a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables t-shirt.  Approximate retail value of each prize package: $59, £ 37.51; or Tier #4: If there are at least 50 but no more than 99 entries, the entrant with the highest judges’ score will be awarded a prize package including a Kindle Fire, a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables t-shirt.  Approximate retail value: $259, £ 164.68.  The entrants with the next 10 highest judges’ scores will each be awarded a prize package including a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables robot t-shirt.  Approximate retail value of each prize package: $65, £ 42; or Tier #5: If there are 100 or more eligible entries, the entrant with the highest judges’ score will be awarded a prize package including an iPad 2, a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables robot t-shirt.  Approximate retail value: $558, £ 354.80. The entrants with the next 20 highest judges’ scores will each be awarded a prize package including a 1-year Instructables Pro membership, a Sugru sample pack, and an Instructables robot t-shirt.  Approximate retail value of each prize package: $65, £ 42. With respect to any prizes that include any gift cards, pre-paid debit cards,  similar cards, or any other items or services that are subject to third party terms and conditions or restrictions, acceptance and use of the prizes are subject to all eligibility criteria, expiration dates, service or dormancy fees, and all other terms and conditions (if any) imposed by the issuer of such cards, items or services. Neither Sponsor, nor any Co-Sponsor, nor any of their affiliates is the issuer of any such cards, items or services, and none of them are responsible for establishing those terms and conditions, for disclosing or explaining any of those terms and conditions to entrants, or for any winner's failure to comply with any of them.  If a winner does not comply with all of those terms and conditions, the winner may not be able to obtain the maximum value, or any value, from his or her prize. The estimated retail value of all prizes to be awarded in the Contest depends on the number of eligible entries and is between: $44 - $1858, £ 27.985.51 - £ 1170.76. Judging. 1.Entries will be judged on the basis of the following criteria (the "Criteria"):  relevance, originality, usefulness, simplicity, and clarity of instructions, each of which will be given equal weight.  Entrants will be judged by the contest manager. Further information on the steps and process of voting and judging can be found in Section B below. Odds of Winning. The odds of winning a prize depend on the number of eligible entries received between the Start Date and the Deadline and the quality of each entry as evaluated by the Judge in the manner described above.  The number of entries received, and the number of winners chosen, in prior contests of Sponsor, including the three (3) most recently completed contests, can be found through the "Contests" page of the Sponsor Site, which can be found here instructables.com/contest.  The number of eligible entries for Sponsor's recently completed contests generally has ranged from approximately two (2) to approximately eighty-three (83), and generally has averaged approximately forty (40), but Sponsor cannot predict or guarantee any specific number of eligible entries for the Contest.   SECTION B - ADDITIONAL TERMS FOR THIS CONTEST General Conditions. By entering the Contest, each entrant agrees to abide by the terms of these Rules and by the decisions of Sponsor and the Judges, which shall be made in all cases in their sole and absolute discretion and are final and binding on all matters relating to the Contest. The Contest is governed by the laws of the State of California and applicable United States federal law, without regard to any conflicts of laws principles. The Contest is void where prohibited by law. The Contest is also governed by Sponsor's Terms of Use, Privacy Policy, and other policies (collectively, the "Policies") pertaining to the Sponsor Site, although the Rules will govern any conflict between the Privacy Policy and the Rules. Exclusions from Eligibility. Employees of Sponsor, any  Co-Sponsor, or their respective parents, subsidiaries, affiliates, partners, suppliers, or advertising or promotional agencies (including without limitation any Judges who are employees of Sponsor, any Co-Sponsor or any of their respective parents,     subsidiaries, or affiliates), as well as members of their households or their immediate families, may submit entries in the Contest, but any such entries are for information and entertainment purposes only and are not eligible to be considered for the purpose of selecting finalists or winners.  Judges who are not employees of Sponsor, any Co-Sponsor or any of their respective parents, subsidiaries, or affiliates, are not eligible to enter or win, nor are members of their households or their immediate families.   Entry. 1.Multiple entries are permitted, but only one entry per entrant can win a prize in the Contest.  Entrants must be registered users of the Sponsor Site to enter the Contest.  Registering for an account with the Sponsor Site may require each entrant to submit entrant's name, e-mail address, age or date of birth, and other details, and in the case of a minor, contact details for a parent or legal guardian for purposes of obtaining proof of parental consent, if Sponsor elects to do so.  Entries can be the work of more than one person, but for purposes of the Contest, each entry will belong to the "Primary Author" named in the entry, regardless of the number of contributors to that entry.  For winning entries, Sponsor will award the applicable prize to the named entrant only, and will not be responsible or liable for apportioning any prize among contributors to a winning entry.  Upon submission, all entries become subject to the Policies (including without limitation the provisions regarding ownership and use of user submissions as stated in the Terms of Use https://www.instructables.com/tos.html).  Entries will not be acknowledged or returned.  Entrants are permitted to modify or update an entry after submission, but are not permitted to do so after the Deadline.  Entries may remain posted on the Contest page of the Sponsor Site indefinitely following the Deadline, but Sponsor reserves the right to delete entries from the Contest page after the Contest ends, in its discretion.  Entries may not be created or submitted through any software-generated, robotic, programmed, script, macro, or other automated method.  Sponsor and Co-Sponsor will have no responsibility for, and will have the right to refuse in its discretion, any entries that have been tampered with, or entries that are misdirected, incomplete, non-conforming, corrupt, lost, late, or ineligible, whether due to Internet or e-mail server failure or otherwise.  Proof of transmission of an entry shall not constitute proof of receipt.  It is each entrant's responsibility to keep Sponsor informed of any changes to entrant's contact or other information during the Contest. Additional Entry Requirements. Each entry must comply in all respects with the Policies, including without limitation all requirements for user submissions, as stated in the Terms of Use https://www.instructables.com/tos.html for the Sponsor Site. Without limiting that requirement, each entry also must comply with the following: Each entry must be entirely the original work of the persons identified in the entry; If persons other than the entrant have contributed to an entry, the entrant must have the permission from each contributor prior to submitting the entry; Entries must not have been published prior to the Start Date; Entries must not have been entered in more than two other previous contests of Sponsor; Entries must not contain anything that is or may be: (i) threatening, harassing, degrading or hateful; (ii) defamatory; (iii) fraudulent or tortious; (iv) obscene, indecent or otherwise objectionable; or (v) protected by copyright, trademark or other proprietary right without the express prior consent of the owner of such right; and Entries must not contain any material that would give rise to criminal or civil liability or that encourages conduct that constitutes a criminal offense. Judging Process. The winner(s) will be determined by the Judges, who will apply the Criteria to evaluate entries. The entries with the highest score(s) will be selected as the winner(s), and the number and type of winners will be as identified in Section A above. The Judges have the right to disqualify any entry that is not in compliance with these Rules, in the Judges' discretion. In the event that a winning entry is disqualified, the next-highest scoring entry will be selected as the alternate winner.  In the event that one or more of the identified Judges is unavailable, Sponsor reserves the right to substitute Judges of comparable qualification, to be determined by Sponsor in its discretion. Prize Terms All values are stated in United States dollars or British Pound Sterling as indicated.  If a stated  prize is unavailable, Sponsor has the right to substitute one or more items of equal or greater value, in its discretion.  No prize is exchangeable, transferable, or redeemable for cash.  The winner(s) will be solely responsible for complying with any and all     applicable statutes, laws (including, without limitation, common law), rules and regulations and for bearing any personal income, VAT, withholding taxes, customs duties, or other taxes, fees,     insurance, surcharges or other costs relating to any prize. THE PRIZE(S) WILL BE GIVEN AWAY BY SPONSOR AND ANY CO-SPONSOR(S) "AS IS."  SPONSOR AND ANY CO-SPONSORS DO NOT MAKE, AND EXPRESSLY DISCLAIM, ANY WARRANTY, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING ANY PRIZE OR PORTION THEREOF, INCLUDING WITHOUT LIMITATION ANY IMPLIED OR STATUTORY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-INFRINGEMENT.  SOME JURISDICTIONS MAY NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, CONSUMER GUARANTEES AND SIMILAR RIGHTS, IN WHICH CASE SUCH EXCLUSION SHALL APPLY ONLY TO THE EXTENT PERMITTED BY APPLICABLE LAW IN THE RELEVANT JURISDICTION. WITHOUT LIMITATION, TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, ALL WARRANTIES AND REPRESENTATIONS, IN RELATION TO THE PRIZES, WHETHER EXPRESS OR IMPLIED BY STATUTE, LAW (INCLUDING, WITHOUT LIMITATION, COMMON LAW), RULE, REGULATION OR OTHERWISE, ARE HEREBY EXCLUDED.   Announcement; Award of Prize(s). 1. The winner(s) will be notified by e-mail within seven (7) days of selection.  The winner(s) (and, if a winner is a minor, the winner's parent or legal guardian) may be required to sign a declaration of eligibility and/or publicity and/or liability release form, to the extent not prohibited by law, prior to receipt of a prize.  The winner(s) must take possession of the prize(s) as directed by Sponsor.  The winner(s) may be required to provide Sponsor with a social security or taxpayer identification number for tax purposes.  The winner(s) also may be required to provide Sponsor with proof that he or she is the Authorized Account Holder of the e-mail address associated with the winning entry.  An "Authorized Account Holder" is the natural person who is assigned to an e-mail address by an Internet access provider or other organization responsible for assigning e-mail addresses to the domain associated with an e-mail address.  In the event of a dispute, an entry will be deemed to have been submitted by the Authorized Account Holder of the e-mail address submitted at the time of entry.  Failure to respond to a winner announcement, or return any required declarations or releases within seven (7) days (or any longer time specified by Sponsor) or to comply with any of the foregoing may result in disqualification and the selection of an alternate winner.  It is Sponsor's policy to assist government employees in meeting their obligations under their Standards of Ethical Conduct; any prize(s) won in violation of those Standards should not be accepted and should be returned at Sponsor's expense or destroyed. Representations. 1.By entering the Contest, each entrant represents and warrants that: (a) the entrant meets all eligibility requirements of the Contest; (b) in entering and participating in the Contest, the entrant has complied and will comply in all respects with these Rules and all applicable statutes, laws (including, without limitation, common law), rules and regulations; and (c) the information provided in the entrant's entry, including without limitation all contact information, is true, accurate, and complete in all respects.   Assumption of Risk.  By taking any action to create an entry for the Contest, each entrant, on his or her own behalf and on behalf of his or her personal representatives, heirs, executors, and assigns, acknowledges and agrees that: (a) THERE MAY BE DANGER     AND RISK OF BODILY INJURY, DEATH, OR PROPERTY DAMAGE INVOLVED IN CREATING AN ENTRY; (b) THESE RISKS AND DANGERS MAY ARISE FROM FORESEEABLE OR UNFORESEEABLE CAUSES; (c) SUCH ENTRANT AND HIS OR HER PERSONAL REPRESENTATIVES, HEIRS, EXECUTORS, AND ASSIGNS ASSUME ALL RISKS AND RESPONSIBILITY FOR ANY PERSONAL INJURY, DEATH, PROPERTY DAMAGE, OR OTHER LOSS ARISING OUT OF THE CREATION OF ANY ENTRY, WHETHER CAUSED BY NEGLIGENCE OR ANY OTHER CAUSE; and (d) such entrant and his or her personal representatives, heirs, executors, and assigns are relinquishing any and all rights he, she, or they now have or may have in the future to sue or take any other action against Sponsor, any Co-Sponsor, the prize manufacturers, any other entities involved in the administration of the Contest, each of their respective parents, subsidiaries, and affiliates, and each of their respective officers, directors, employees, agents, and representatives (the “Sponsor Parties”) on the basis of any injury, death, damage, or other loss that may be suffered arising from any action taken in the creation of any entry,     including but not limited to claims based on allegations of negligence by any of the Sponsor Parties.   Release. To the maximum extent permitted by law, by entering the Contest, each entrant releases and holds harmless the Sponsor Parties from any and all responsibility,     liability, damages  (including, without limitation, direct, indirect, incidental, consequential, punitive, statutory, and other damages), losses, costs, or expenses of any kind arising out of or     relating to: (a) entry or participation in the Contest, including but not limited to disputes among individuals claiming to have contributed to any winning entry; (b) any violation by the entrant     of these Rules, the Policies, or applicable laws; (c) misappropriation, infringement, or other violation of any copyright, trademark, patent, trade secret, right of publicity, privacy, or other legal or contractual right of any person attributable to entrant or any entry submitted by entrant; (d) the acceptance, possession, receipt, or use of any prize or any item purchased with any prize (e.g., if the prize includes a gift card); (e) any entries or votes that have been tampered with or that are misdirected, incomplete, non-conforming, corrupt, lost, late, or ineligible; (f)     any problems or technical malfunctions (including but not limited to errors, omissions, interruptions, deletions, defects, or delays in operation or transmission) of any computer, telephone, modem, cable, satellite, network, hardware, online system, server, software, or     other equipment or provider, including any incorrect, incomplete, garbled or jumbled information resulting therefrom; (g) any Internet traffic congestion or website accessibility or delays; (h) printing or typographical errors in any Contest-related materials; or (i) any other technical or human error that may occur in connection with the Contest (the “Causes”).  If anyone makes any claim against any of the Sponsor Parties arising out of or relating to any of the Causes attributable to the entrant, the entrant will pay for any damages, losses, liabilities, costs, penalties, and expenses, including without limitation attorneys’ and experts’ fees and costs, incurred in connection with such claim. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, THE SPONSOR PARTIES SHALL NOT BE LIABLE FOR ANY LOST PROFITS OR ANY SPECIAL, INCIDENTAL, INDIRECT, PUNITIVE, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE CONTEST, HOWSOEVER CAUSED, WHETHER ARISING IN STATUTE, TORT, CONTRACT, OTHER LEGAL THEORY OR OTHERWISE, AND ALL SUCH DAMAGES ARE HEREBY DISCLAIMED AND EXCLUDED.  SOME JURISDICTIONS MAY NOT ALLOW THE LIMITATION OR EXCLUSION OF LIABILITY FOR DAMAGES AND OTHER     LIABILITY (INCLUDING INCIDENTAL OR CONSEQUENTIAL DAMAGES) IN WHICH CASE SUCH LIMITATION OR EXCLUSION SHALL APPLY ONLY TO THE  FULLEST EXTENT PERMITTED BY APPLICABLE LAW, RULE, STATUTE OR REGULATION IN THE RELEVANT JURISDICTION. NOTHING IN THESE TERMS EXCLUDE LIABILITY FOR FRAUD, OR FOR PERSONAL INJURY OR DEATH CAUSED BY NEGLIGENCE TO THE EXTENT SUCH EXCLUSION IS PROHIBITED BY     APPLICABLE LAW.   Misconduct. Sponsor reserves the right, in its discretion, to disqualify any entrant who: (a) tampers with the entry or voting process, the operation of the Contest, the Sponsor     Site, or affiliated websites; (b) acts in an unsporting or disruptive manner, or with intent to annoy or harass another person; (c) is otherwise in violation of these Rules, the Policies, or any     applicable laws; or (d) attempts to subvert the letter and/or spirit of these Rules. SPONSOR RESERVES THE RIGHT TO SEEK DAMAGES FROM ANY SUCH PERSON TO THE FULLEST EXTENT PERMITTED BY LAW.   Termination. 1.Sponsor reserves the right to suspend, modify, or terminate the Contest at any time for any reason, in its discretion, including without limitation in the event of fraud, abuse, tampering, technical, administrative, financial, or other difficulties.  In such cases, Sponsor will post a notice on the Contest page of the Sponsor Site.  Should the Contest terminate prior to selection of the winner, Sponsor will announce an alternate means of awarding the prize on the Contest page of the Sponsor Site.   Advertising. By entering the Contest, each entrant grants to Sponsor the rights to use his or her entry as provided in the Policies, including without limitation the provisions of the Terms of Use https://www.instructables.com/tos.html regarding ownership and use of user submissions.WITHOUT LIMITING THE FOREGOING, TO THE MAXIMUM EXTENT PERMITTED BY LAW, BY ENTERING THE CONTEST, EACH ENTRANT CONSENTS, AND WARRANTS THAT IT HAS OBTAINED THE WRITTEN CONSENT OF EVERY CONTRIBUTOR TO THE ENTRY,  TO THE USE BY SPONSOR, ANY CO-SPONSOR, OR ANY THIRD PARTY CHOSEN BY SPONSOR OR ANY CO-SPONSOR, OF ANY AND ALL INFORMATION, DRAWINGS, TEXT, PHOTOS, VIDEOS, OR OTHER MATERIAL CONTAINED IN AN ENTRY OR OTHERWISE  PROVIDED BY SUCH ENTRANT RELATED TO THE CONTEST, INCLUDING ANY PERSONAL INFORMATION OBTAINED THROUGH THE CONTEST, FOR ADVERTISING, MARKETING OR ANY OTHER PURPOSES NOT PROHIBITED BY LAW. Otherwise, each entrant retains whatever rights it may have in each entry to the extent provided in the Policies.  To the maximum extent permitted by law, by accepting a prize, a winner consents on his or her own behalf and on behalf of any contributor to the entry, to the print and online publication of the winner’s user name, first and last name, address, and winning entry as part of the official winner's list and also to the use of his or her winning entry, first and last name, user name, voice, photograph, biographical material, and likeness by Sponsor, any Co-Sponsor, or any third party chosen by Sponsor or any Co-Sponsor, for advertising,     marketing, and other purposes without additional compensation. Other than as set forth herein, Sponsor will treat any personal     information supplied by entrants in connection with the Contest in     accordance with Sponsor's Privacy Policy   https://www.instructables.com/about/privacy.jsp. Miscellaneous. 1.Other than for entrants who are U.K. residents, Sponsor, any Co-Sponsor, and each entrant agree to the non-exclusive jurisdiction of an appropriate state court in Marin County, California, or an appropriate federal court located in San Francisco, for any action or proceeding arising out of or related to these Rules, the Contest, or any prize.  For U.K. residents: these Rules are governed by the Laws of England and Wales, and Sponsor, any Co-Sponsor, and each entrant agree to the non-exclusive jurisdiction of the courts in England in connection with any action or proceeding arising out of or related to these Rules, the Contest, or any prize.  By entering the Contest, each entrant submits to the jurisdiction of those courts and waives any objection to those courts, whether on the basis of jurisdiction, venue, inconvenience of the forum, or otherwise.  If any part of these Rules is held by a court of competent jurisdiction to be invalid, illegal, or otherwise unenforceable, such part will be modified by such court to the minimum extent necessary to make it enforceable while preserving to the maximum extent possible the original intent of Sponsor, and the remaining parts of these Rules will remain in full force and effect.  Nothing contained herein or in any of the Contest related materials should be construed as an endorsement by Sponsor of any Co-Sponsor, or of Sponsor or any Co-Sponsor of any third party, product, or service. Winner's List; Mailing List. The user name(s) and entries of the Contest winner(s) will be posted on the Contest page of the Sponsor Site, within thirty (30) days of awarding of all prizes.  In addition, the names of the winner(s) may be obtained by sending a written request and a self-addressed, stamped envelope to the below address (requests must include the words "WINNER'S LIST" and the full name of the Contest prominently in the first line of the address): Instructables 82 2nd St.   San Francisco, California 94105 USA All such requests must be received within six (6) months of the Deadline.  Sponsor's telephone number for Contest purposes is (01-510-473-7626).  Entrants who opt to join Sponsor's electronic mailing list agree to be contacted by email by Sponsor.  Requests for removal from Sponsor's mailing list may be made as instructed in any such email, or by sending a written request and a self-addressed, stamped envelope to "Instructables Mailing List" at the above address, by calling the above telephone number, or as otherwise indicated on the Sponsor Site.  Residents of Vermont may omit return postage on winner's list and mailing list requests.    © 2011 Instructables, Inc. All rights reserved. INSTRUCTABLES is a registered trademark of Instructables, Inc. Other brands may be trademarks of their respective owners.

Topic by scoochmaroo 7 years ago


CAT PROOFING MY JEWELRY ETC....

I have a multi-toed (Polydactal) cat blessed with the ability to access most anything, and even open cabinets and drawers that slide open and shut. I have quite a few sets of earrings (by a few I mean close to 50ish) - I probably wear a variety of about 4 now because it's too hard to keep the favorites out and visible without my cat also seeing and being able to access them.  I saw some earring display ideas on the site, however, I really want to make something that is easy on the eyes but not something that becomes the center of attention in the room.  HELP!!!!

Topic by Bigsocks28 8 years ago


How do you clean rust from metal jewelry?

How do you clean rust from metal jewelry? and those greenish residue thingy on metal jewelry.. how do you clean it? Safely without damaging the jewelry..?

Question by md4v3 9 years ago  |  last reply 8 years ago


What do you want to know about handmade jewelry?

I like to know what people want to see in a jewelry tutorial. 

Topic by VintageStyleJewelry 3 years ago  |  last reply 3 years ago


How do I make a jewelry organizer?

I am looking for a way to simply , yet elegantly organize my jewelry in my bedroom

Question by Jules0988 8 years ago  |  last reply 8 years ago


how to make ear wires?

Question by vazelle 6 years ago  |  last reply 6 years ago


Is it possible to solder airdry clay objects? Answered

Hello, I am a beginner in jewelry making and I was wondering if it's possible to make a soldered frame around my airdry clay pendants or wrap them with coppert-tape and solder?

Question by Sanvan 2 years ago  |  last reply 2 years ago


Soldering copper to copper?

I'm just starting out but most of the instruction I've seen on soldering (jewelry) talks about flux, the solder itself, and a torch or soldering iron. When soldering copper to copper is there a special flux and solder to be used so that the solder doesn't look "silver"? Does it matter whether you use a torch or a soldering iron?

Question by 9 years ago  |  last reply 11 months ago





Can you melt silver at home (for jewelry)? Answered

I want to melt metal, preferably silver, to stamp in the process of making jewelry. I want to know the process and the materials/equipment needed.

Question by 9 years ago  |  last reply 2 years ago


Our biggest and best Jewelry Contest ever is starting on 4/15!

We've selected some fabulous prizes from Otto Frei and Rio Grande and we cannot wait to see all the amazing jewelry our community will create! Prizes include premium and simple jewelry making kits, mini drill presses with drill bit sets, and wire wrapping kits. The Jewelry Contest is open April 15th through June 10th. We're looking for creative jewelry instructables including metalworking, ceramics, wire wrapping, 3D printed jewelry, mixed media, beading, and more! Head over to the contest page to get all the details.

Topic by jessyratfink 6 years ago  |  last reply 6 years ago



I want to learn how to do enamel jewelry? Can you give me some help? Answered

I want to learn how to do enamel jewelry? Can you give me some help?

Question by threadbare 9 years ago  |  last reply 3 years ago


Powder coating/strong spraypainting for metal jewelry

I'm looking to create colored metal jewelry findings with a durable surface, are there any products or techniques that i could do DIY? Otherwise are there any sites that sell nice coloured/powder coated/matte surface findings? I can't seem to find anything!!

Topic by jarris 5 years ago  |  last reply 5 years ago


Ponoko 10-day Jewelry Design Challenge

Ponoko is holding a Laser Cut Jewelry Design Challenge. Design a piece of jewelry, made by laser cutting, for a chance to win free copies of your designs or $1000 for the overall winner. Be sure to share your creations here with an Instructable, or Slideshow Instructable!The Ponoko 10-day Jewelry Design ChallengeBody adornment dates back 30,000 years. It serves as a way to communicate our personal identity to the world and has a physical and emotional relationship to our bodies.Your challenge is to create inspired and evocative jewelry on a laser cutter - within 10 days!You can treat material in a variety of ways using a laser-cutter. You can cut shapes and mark patterns on the surface. You can create a single 2D piece or something more complex assembled from a number of parts.Laser surface treatments can be a graphic in nature or a texture. There are infinite possibilities for treating the surface of a material to add value and interest.Jewelry need not be 2D. You could make 3D jewelry using layers of material connected in an interesting way. Think about how multiple pieces can be combined to create an interesting design.Attention to detail, material combinations, connections, production feasibility and quality will be key to making your design stand out.Up to $10,000 in prizesUp for grabs:* Open roundo The designers of the top 25 entries get their product made for free - that's materials, making and shippingo Plus they'll be invited to submit their entry into the final round* Invitation roundo The top 10 designs win US$300 casho Plus there's an additional Grand Prize of US$1,000 cash for the overall winnerDesign requirements:* It must be possible for Ponoko to make the main component of your design.* Designs must be new (i.e. not already hosted on Ponoko).* You can only use materials in the Ponoko materials catalog.* You can use extras such as hooks, chains, clasps, pins etc (supplied and assembled by you).* If you submit multiple designs, they must be unique. Please don't just submit iterations of the same design.* Designs may be as simple or as complex as you want.

Topic by ewilhelm 11 years ago


Is it safe to use old ornament hooks for jewelry? Answered

I want to use some old, "giant staple-looking" ornament hooks to make beaded charms to hang off a choker, but I don't know what the hooks are made of. I don't really know anything about beading materials or jewelry-making in general. The packaging's long gone and they've been sitting in the toolbox for years. I made one charm and want to make more, but I don't know whether it's okay to keep using these hooks or use wire that's actually sold as wire for jewelry-making. Aside from "don't stab yourself, don't ingest the wire," I'd like to know whether this kind of metal can cause skin irritation or rashes or if that's an issue with any sort of metal (if the latter, is there anything I can do about it?). Unfortunately, I haven't tried wearing the charm I made because I have a bug bite on neck; the charm would brush right up against it. My fingers seem fine, though.

Question by Selceta 8 years ago  |  last reply 8 years ago


how to make a metal shot plate for decorative shot for jewelry making ?

Want to know how to make a decorative shot plate for decorative shot for use in jewelry making. Just the general knowledge of how to make one ..

Question by Offtofindalife 3 years ago  |  last reply 3 years ago


Make awesome jewelry out of household objects

If you want to make something cool for yourself, you can use some household items and your imagination to create some amazing things. Anni Albers did just that several decades ago and you can now get kits to recreate them. Or maybe just dig around in your drawers and see what you can make with what you already have. Make Like Anni Albers, Turn Household Objects into Dazzling Fashion Statements

Topic by fungus amungus 9 years ago  |  last reply 8 years ago


Melting Tin Alloy to make pendant jewelry

I've made several attempts to melt down a tin alloy metal (92% tin, 8% antimony) to make pendants; small pendants for necklaces. I haven't had any luck with this at all!  The mold has been cast - the metal has been chosen but...my process isn't working. I'm using a hot plate and a small teflon pan to melt the metal. The problems I'm running into are: Once I melt the alloy, I can't get it into the mold before it starts cooling.  It pours out too quickly from the pan, then cools too quick to finish pouring.  It's a small mold (1 3/4" diameter with 1/8" lines) which isn't helping I'm sure.  Not sure on a couple things I'm hoping somebody who know more about this than I do could possibly make some suggestions. I don't know if I should be using a flux to keep the metal clean because it is getting dirty after the melting. I don't know how to get it from the pan to the mold before it cools? Someone, I'd imagine, must have come out with a tool for transferring small amounts of metal to molds.  I tried a glass eye dropper today but didn't have any luck with the transfer process.  Not sure if a crucible and flux is the way to go or not. If so, does anybody know of a good company that has items designed for this type of work? Any and all help / info / suggestions would be greatly appreciated!!  Thank you

Topic by Vince11 3 years ago  |  last reply 3 years ago