Search for Kilns to heat Gemstones in Topics


How to make a kiln that works on gas an oxygen?

To produce a temperature of about 2000c how can one make a kiln at home? What are the raw materials needed?

Question by JilM3    |  last reply


I'm looking for the ideal insulation material to keep heat onto the kiln inside a calciner ?

I'm making a calciner that heats gypsum to a heat of 350 degree Celsius. A burner will be used to heat the rotary kiln to a constant temperature of 350 degree Celsius. I'm looking for the ideal insulation material to make the housing of the keep the heat onto the kiln inside the calsiner. The material must not be to heavy. I'm looking for a material something like fireclay, but something more ideal to build a housing of.  The insulation will be put inside the housing like in the image.

Question by DanieS6    |  last reply


brainstorming a controlled temp kiln for polymer clays?

I am making some highly  detailed prototypes, and Im using polymer clay for the details. I've been baking them in my kitchen oven, but it's starting to get hot with summer coming on... I want to limit the heat production in my house! I have an old toaster oven, but it's too small for my items. I was thinking of taking it apart, and using the heating elements and temp controls in something a little bit larger. I'm wondering what the community thinks about that? My temperature needs to be 275° for fifteen minutes at a time. Some temp fluctuation is okay. I'm thinking 14 inches cubed would be plenty of room for my largest pieces.  somewhere I noticed someone using cement board as an insulating wall, I was thinking a cube made of that with a hinged side. Does anyone have other ideas for me? TTY

Question by probablepossible    |  last reply


Copper tape for thermal concentration

Has anyone ever used copper tape to concentrate heat on an object to obtain a uniform higher temperature?   I've been doing some studies in the recent past that suggest polished copper foil is a good reflector of infrared energy. It is not as good as silver, but I don't think it would go over well to use silver in any sort of oven or kiln.  I used to think good ole aluminum foil was good for heat, but it turns out it is only good for stopping heat.  I've thought of using the instructable on the waffle iron or make one by way of a bread toaster, but will most likely not be able to go through with it.  The copper foil is the same type found at stained glass craft shops. 

Topic by jmikronis    |  last reply


On and Off Switch?

I have a kiln that I need maintained at a certain temperature for an extended period of time (9 hours). Problem is  the kiln I got doesn't maintain its temp, it just constantly supplies heat until it would kill itself. Making me sit there for 9 hours turning it on and off exactly once a min. Obviously this is a problem... there is a physical on and off switch where maybe I can rig up some timer to hit it for me? Otherwise maybe there is a way to modify the wall outlet to supply power 1 min on, 1 min off? Any suggestions would help, thanks :D  http://www.clay-king.com/images/quickfriec.jpg

Question by ReconIII    |  last reply


Chemistry Questions: What do you get from combining salt, white vinegar and cupric oxide? And what can be done with it? Answered

In my enameling work, I sometimes use a mild homemade pickling solution to remove firescale (cupric oxide) from copper. The pickle is a saturated solution of white vinegar and kosher salt, kept hot in a Crock Pot. After heating the copper pieces in a kiln, a layer of cupric oxide forms on the surface, which is then dissolved in the salt/vinegar solution. After a while, the solution turns a lovely blue color from the dissolved copper. If I forget to put the lid on the pot, eventually the solution evaporates, leaving pretty blue crystals that look a bit like copper sulfate. So, what have I got here? I don't want to just dump it due to the copper content. I'd like to figure out something to do with it, but first I need to know what it is. I'm thinking it might make a good electroplating solution, but that's just a guess.

Question by RavingMadStudios    |  last reply