The forums are retiring and are now closed for new topics and comments. The existing content will remain online and accessible through 2020 to provide everyone the opportunity to save any relevant information. In the spring of 2021, these Community forums will be taken offline.

Search for L in Topics


l love mobiles

it was a huge round one..purple

Question by lovegumm    |  last reply


How can I built two wheeled robot?

Question by mcte    |  last reply


Knex scar L not working?

My scar L is not working when i pull the pin back the bullet goes backwards and forwards sometimes and when it does fire it does not go very far any ideas on how i can fix this?

Topic by pongopeter826    |  last reply


Amana TEA400-l dryer

I have an Amana TEA400-L dryer. I needs to replace the heating element part#61927.After taking the front screws out to open the dryer where is and how do I get the heating element out?

Topic by htech69    |  last reply


how do l know ?

There is this guy and he is 15 and i am 14 and i don't know if he likes me and i don' t  talk to him vary much because i am to shy what do i do?

Question by taytay1998    |  last reply


A/C L E D

I am new to led lights. I want to make some lamps that run off ac power. My qt is what do I need to run a dc led on ac. Simple I know but I still need help. Thanks

Topic by rdy2sail    |  last reply


How to make an L-shaped shower curtain rod? Answered

 How do I make a L-shaped shower curtain rod? I do not mind an industrial look. (raw pipes) The size is 29" x 29". I need to make it by Thanksgiving. I dont want to have to use a support bar, but i will if i need to. 

Question by jjett1    |  last reply


does sitting like L make you more intelligent? Answered

In the anime series 'deathnote' there is a guy in it called L who sits with his legs up so his feet are on the chair and the main thing he is balancing on. When questioned why, he says its becuase if he doesnt his deductive skills will be reduced by about 40%. I thought it may be becuase not as much blood can go to your legs so more goes to your head, but I am not sure. Please help

Question by Ikkalebob    |  last reply



HIGH POWER LED DRIVER?

Can someone help me I am trying to make video lights using 5 Watt and 10 Watt LEDs. I need a simple circuit to use these LEDs, I will be using 12v battery as power souce.

Question by MUNIR1  


What should l make out of k'nex? l am running out of ideas so l need your help!

I don't know wat to make out of k'nex cos l've made literlly everything!!! Pls help!!!

Question by BalintRules    |  last reply


MKG L - AKG cable for PT40

Does any one know how to make the MKG L - AKG cable, this the instrument cable for the pocket transmitters of AKG (PT40). I had made a standard Mini XRL to 1/4 jack cable but it doesn't work, when I plug it into my guitar I only get the lower frequencies and it seems like the guitar have no ground (when I move the volume potentiometer or any other switch it makes a lot of noise). Please help me, Thank you all...

Topic by Big_Rush  


Senior Waffleman's Scar-L Problem

Hey guys! Well, I was at a loss as to what to build on Tuesday, so i decided to build Senior Waffleman's Scar-L. I decided this for multiple reasons, among which, the gun just looks flippin' awesome! Well, I finished it Thursday (I did not have much time to build between when I began and Thursday) and I began to work with it, shooting it, editing it and so fourth. Well, the gun is horrible when it comes to shooting, and I'll tell you why. What you see in the paint image below is basically what the internals of the front of the gun look like, and you may see the problem. The mag I made was different than his, and was more realistic, but as the bullets go up the barrel, they stop as they hit the top of the barrel. When the FP hits the bullets (his shooting mech is freaking brilliant, and works well) The bullets either: 1) Don't leave the barrel, or 2) Leave the barrel at a speed of 60 meters-per-year. Everything works well, except for the fact that the bullets don't leave the barrel half the time. Tell me what you all think...? Keep in mind, I've tried lots of different ways to fix this. I tried: making the barrel taller, making the bullet heavier, hitting the bullets harder by adding more rubber-band power, and even making a breach-loading mech to at least make the gun shoot. Help!

Topic by The Red Book of Westmarch    |  last reply


Knex S.G.S.L

Here is a really cool gun I just made up. Its a grey spacer launcher. Its pretty fun to shoot, it goes about 10FT using grey spacers. It is single shot but its just plain cool.  

Topic by DELETED_Blue Mullet 2    |  last reply


My Son is building Pinewood derby cars and he wants to set one up to run flashing L.E.Ds. Answered

2 head lights 2 tail lights and 2 red and blue over head lights. This is to resemble police car and it has to stay in the size of the car and weight Width: - 2-3/4" Length - 7" Width between wheels - 1-3/4" Weight - Not over 5 Ounces THANKS any help would be great !!!!?

Question by Brian09    |  last reply


wiring of L.E.D. bulbs for constant "on" and reduced heat ?

Self-confessed "tinkerer" with little/no electronics knowledge OR understanding....In need of guidance/expertise ? I have a project; requires constant 5V (from USB) to power/light several L.E.D.'s (either cool white or bright white) in a straight line(s) to illuminate an area approx. 1/2" (W)x 6.0"(L) x 1" (H)... Not knowing the power requirements of various L.E.D.'s ....some LED's require 12V and additional equipment. And the expected period of use being 6-8 hrs (max.) - I'm afraid of problems regarding heat dissipation and poor LED longevity ? With these constraints, I'm unsure if this is feasible or not ? Any help or suggestions ?  Have "tinkered with a string of LED's powered by (3) AA batteries = 4.5 volts x 30 LED bulbs. Didn't seem to get hot using the batteries. After cutting these bulbs from string and "bundling " positive (+) and negative (-) ends and connecting to 5V from USB ...got very warm-hot ? Reading various online posts that seem to agree that the output from batteries is NOT constant...is this the problem OR maybe not using "resistors" and not knowing what type or how many would be needed ?

Topic by callhow    |  last reply


L.E.D. Wall clock idea

I saw this clock design the other day. It was a circle with the clock hands in the middle and unattacked to the clock there were dots around it to mark the hours. I want to improve this design by making the hour dots light up on their respective time for the whole hour. Maybe make them have a nice dimming transicion between the hour switch at the last second. I don't know much about programming L.E.D.s or what hardware I would need. Can somebody help me how to make this project?

Topic by rabril  


G.R.O.U.P

This is just a group that can talk about L E D light or nerf mods but not cooking or baking. man start or own group only technology, play, outside, workshop and soler.?

Question by vee-man.mol    |  last reply


sorry for the bad spelling ummm all right what could i make with a 1 inch by 1 inch soler panel?

No L E Ds light i have plenty something fantastice

Question by vee-man.mol    |  last reply



How do I create switch on&off LED light?

HI, just wondering how to mix this all up and get a Switch/Resistor LED Light to put on my helmet

Question by BrociliTree123    |  last reply


help led driver?

Ok so i have 3 leds in series but in total i have 4 sets of these. the ma is 20 and the volts is 3.4 or 3.6 on the led and i want to run it at 12 volts with 6800ma. what i want to do is build a driver to regulate them so they wont burn out fast. so i want to know how to build one and what i need.

Question by diabloboy    |  last reply


Can I mix LED bulbs with regular bulbs in a set of track lights?

I put track lights in my kitchen several years ago. I recently found some LED bulbs but they cost around $15-30 each. Can I mix different bulbs in track set?...$60.00 is a little steep. I'm hoping for less light / heat output.

Question by artist without a medium    |  last reply


L.E.D desk lamp run on 12 volt? Answered

So I have an L.E.D desk lamp that plugs into the wall. It is hardwired into a power adapter witch  converts 120 volt to an output of 14 volts, If I cut off the adapter can they be run straight off a 12 volt battery. It is very bright so some lost light is okay, I fried the inverter for my cabin and need some light. 

Question by camping crazy    |  last reply


how come the letter L in google is green? Answered

I realized that the letter L in google is green. Can anyone please tell me how come the letter L in google is green 

Question by DELETED_pjrpumpken    |  last reply


Fun with Djradio's SR-L crossbow (mods)

This crossbow is prob my favorite...Its very easily modified!! Check out my mods and post your mods YAY With just about any mod.... THIS HAS POWER!

Topic by Wafflicious    |  last reply


Longbow SR-L v2 -Now posted

I thought the old version (second pic) would be final, but I found out i had several parts, so I modded the top rail a little bit.This was going to be a sniper rifle ,the SPEC-9 v2, but I added a bow to decrease loading time and to make the design work. The major improvements over v1 are the stock, barrel, and it has a new sight now.I would call the longbow SR-l the SPEC-9 v2...This is possibly the biggest knex object I have made.PROS- true trigger- very powerful- good range (70-90 feet)- very accurate- has a sight- better stock- has a collapsible bipod- faster load time than v1 (5 seconds for v2, compared to ten seconds for v1)- NEVER jams or misfiresCONS- out of all my knex projects, this uses the most parts. (but im sure this isnt a problem for every other knexer out there)credits:stock- bartboyBipod- KillerKI do not have a final range because The only place where I can test my sniper bow is blocked by my christmas tree. final range- 70-90 feet.its a combo of my SPEC-9 sniper rifle and my longbow SR-l crossbow.It is coming out this Saturday at the earliest, but im not 100% sure.

Topic by DJ Radio    |  last reply


Knex Review: Longbow SR-L Crossbow

Creator: DJ RadioLink: https://www.instructables.com/id/Knex_Longbow_SR_L_crossbow_The_offical_sniper_remi/Area Overviews:Comfort: 9/10Range: 8/10 (50ft)Power: 9/10 (i can get it through 3 sheets of paper)Gun Strength: 6/10 (may break with too many bands)Gun Overview:Stock: 7/10Handle: 9/10Barrel: 8/10Trigger: 9/10Comments: a pretty cool crossbow. it fires well but may misfire sometimes. the bow does bend quite a lot so dont make unless you dont mind bending a few rods. the trigger is reliable and the handle s pretty comfy. the stock is comfortable but doesnt look the best.Verdict: the body could do with a kool looking frame and filled in stock etc. a new bow that doesnt bend could do no harm. but overall a pretty good crossbow!

Topic by statified    |  last reply


Should I be L Lawliet from Death note for halloween even though I'm a girl?

I've seen people cosplaying as L, but I can't find a girl doing it. I really like the series Death Note, but I'm afraid I can't pull off being L for Halloween. I can act like L pretty well, but I dunno if I can look like L. (I'm asian though, so that might help) I have long black hair and slight bangs. But I wear glasses. Any suggestions?

Question by RockinAngelic    |  last reply


iam from lebanon can i share with this contests

I love contests but my country is not revealed in the listed countries  can i share?

Topic by hadi141    |  last reply


How do I make a cluster of pulsing L.E.D.s.

I want to make a pulsing red light to insert into a sculpture project. The finished piece will be about 2' x 2'. They all need to pulse at the same time for the same duration, fade in fade out type scenario. I want the lights to be pretty bright, where do I start?

Question by dangitalltoheck    |  last reply


50cc longjia lj50qt 3-l wiring fault?

My sons Chinese moped when switched on will show the fuel gauge level and indicators work, but once he set off moving they fail and when he stops again they work ok. does anyone have any suggestions where I can pin point the fault or general area I need to be looking for the problems. I can fix most things but wiring is my weakness. 

Question by MichealH12    |  last reply


H E L P! Password troubles with this site

I have had troubles with password resets. i am ranting about this because your password re-set tool is off. every time i login i have to reset my password because it says my password has been changed. this happens even if i sign out right after i created a new password. this has happened constantly for the past week. i love this site but my tolerance is being cut short. please email me at nuckthebuck@aol.com or at least leave a reply so i know someone even reads these.  if your tech support contact me or lose a few instructables in the making if this isnt fixed soon. ill explain more if i get at least 1 reply from a pro member or an administrator or from tech support. i was using google chrome o/s windows 7 for everyone else with this problem. i fixed it by the help of someone below. sorry cant remember your name. i fixed it wb going to the tool icon drop down menu>history>edit history>delete all browsing information>check mark all boxes> enter>re-login should work =]

Topic by nuckthebuck    |  last reply


Laser pointer help? Need it now! Will be greatly appreciated.

Do cheap-o $5 red laser pointers use an LED light in any parts? Thanks in advance>

Question by Raineyman    |  last reply


Replacing LEDs on a LED fan? Answered

If the LEDs are the same voltage, can i just cut the wires on the LED fan, and just simply re-solder the new LEDs onto the wires? I have been looking at several Instructables about replacing the LEDs on a fan, and they all have complicated re-wiring ideas..Can't you just simply replace the LEDs with the news ones?

Question by ramroids55    |  last reply


Please help to select a power source for 100W LED?

I want to make a spotlight using 100W LED powered by a 2200mAh LiPo. I understand I need a power booster for this. Please suggest one of the correct specification. The LED: http://www.ebay.in/itm/100W-LED-COB-Chip-CW-WW-Blue-Red-Green-Super-Bright-single-color-/331632451175?var=&hash;=item4d36d59e67:m:mxsTE0PLt5bDCjp8vJJs5CQ The battery: Standard LiPo of 11.2V. max current of 55A Thanks a lot

Question by AlekhK    |  last reply


S.T.A.L.K.E.R artifacts models?

Hi, I'm looking for someone making artifacts from S.T.A.L.K.E.R games. I'm going to make some models of them, so I'm just looking for someone, who tried to make some? Does anybody have any perception? For example, which materials are good, which are not. I'm want it for larp action next year. I tried plastic (polystyrene), but it's so fragile. I wanna try melt PET plastic from bottles. Glass is absolutely unuseable. Some tips for transparent, solid material, which is easy to obtain and work with it? If someone tried to make some models of artifacts, send photo :) Thanks

Question by FireCrier  


Years Back in the 80's a friend had a stereo from "Fingerhut" that had spinning l.e.d fans that reacted to the music? Answered

The stereo had two fan like l.e.d. arrays of about 10 each in different colors red green yellow that were on fan like structures inside each of the 12" woofers on his home stereo that he got from "Fingerhut" the l.e.d.s would pulse with the music one side of a blade to the bass and the other with the highs usually ending up making a red & green with yellow pulsating orb inside each speaker that was seen through the black speaker cloth, I have never seen anything like this before or after anywhere but it was a very nice display and could be made with wheels or ceiling fans or any fan I bet, I wish I would have taken electronics in high school instead of CAD but the cad system was cutting edge in 86 and our school had access to them...the only thing I have seen like this is the floating message thingys that use a back and forth l.e.d.s waving in the air. I know if someone builds it it would sell good even for the automotive speaker markets...this was cheap chines junk it could not have cost much to build it but it did look great!!!! I have seen the automotive led wheels that can display pictures and such but this is way simpler than that and the power source and electronics were not spinning withe the leds... trust me build it and you will spend hours watching them while listening to music almost as good as what music videos used to be :) Anybody Seen or Know where they can be bought or can build them? Fast Ed88

Question by FastEd88    |  last reply


Bp holdings-Pellnäs att köpa BP av ryska samriskföretag l Librarything l Goodreads

Http://www.goodreads.com/topic/show/1077584-bp-holdings-pelln-s-att-k-pa-bp-av-ryska-samriskf-retag-l-librarything Bp holdings Styrelsen för BP har godkänt ett erbjudande från det ryska statliga oljebolaget Rosneft att köpa de flesta BP: s verksamhet i Ryssland för kontanter och aktier i Rosneft, ytterligare konsolidera Rysslands kontroll av dess oljeindustrin. Enligt villkoren i affären, skulle BP förbli i Ryssland men - ursprungligen minst - bara som en minoritetsägare i ett oljebolag som kontrolleras av regeringen i President Vladimir Putin. Senare hoppas BP att använda denna strategiska slips med Kreml för att trumma upp. BP har som visar sin vilja att göra en del för viss tid och Rosneft in formellt erbjudande förra veckan för att köpa ut BP: s 50 procent av ett samriskföretag som kallas TNK-BP. Styrelsens godkännande får BP: s verkställande direktör, Robert Dudley, att förhandla om de slutgiltiga villkoren för en försäljning av sitt ryska anläggningar inom en rad av bra kombinationer av kontanter och aktier. Intervallen var $US10 miljarder till $US14 miljarder och 15-20 procent av Rosnefts aktier. BP är sannolikt att få en plats i styrelsen. Annons Ett formellt tillkännagivande väntas så tidigt som den här veckan. För BP är försäljningen det största steget ännu i herr Dudley ” krympa växa ” strategi i kölvattnet av oljeutsläppet 2010 golfen. Herr Dudley tog över mitt i denna katastrof och beslutade att BP, att överleva, sätter sin globala verksamhet på en ny fot genom att sälja äldre, mindre lönsamma områden och koncentrera sig på prospektering. BP sålt tillgångar i länder från Venezuela till Vietnam. Ryska innehav var den största som passar in på kategorin för potentiella försäljning, mestadels åldrande oljefält i Sibirien med lite potential för nya utdata. Fortfarande, de svarar för ca 25 procent av BP: s globala produktionen, eller om så mycket olja som BP pumpar i USA, inklusive Alaska. För Ryssland tar buyout av BP: s andel i TNK-BP en stor våg av industrin full cirkel tillbaka till statligt ägande. Rosneft’s chief executive, Igor Sechin, en före detta militära underrättelse officer och en nära medhjälpare till Vladimir Putin, är en förespråkare för större statligt ägande i oljeindustrin. Om Rosneft köper BP och de ryska miljardärer som styr den andra hälften av TNK-BP, kommer det bli världens största börsnoterade oljeföretag, med produktion av cirka 4.5 miljoner fat om dagen. ” Vi har sett detta anmärkningsvärt förstärkning av inverkan av Rosneft och Setjin personligen,” sade John Lough, en f.d. TNK-BP-tjänstemannen. ” Hur ryska system fungerar genom att en fördelning av inflytande och tillgång till hyror oväntade vinster att uppnå övergripande jämvikt som staten bygger,” säger han. ” Setjins uppenbara förstärkning av inflytande kan komma genom upprätthålla balansen. Det kan rubba apple kundvagn.” Bp holdings More here: http://www.dailymotion.com/video/xuldpm_bp-holdings_news http://www.funnyordie.com/videos/1826221a30/bp-holdings http://groups.drupal.org/node/264478 http://current.com/groups/bp-holdings/ http://www.zimbio.com/News/articles/4hdK7GHpm86/BP+Holdings+l+BP+styrelsen+godk+nner+Rosneft http://www.slideserve.com/chelogaard/bp-holdings-bp-styrelsen-godk-nner-rosneft-deal

Topic by victoriammeneger  


LCD Help how to Arduino ? Answered

I need help hooking up a lcd to an arduino here is a pic

Question by MACKattacksnipe    |  last reply


(newbie) materials to build a sliding "inverted-L" stand / pole

Hi folks!Just discovered this fantastic website! I have this very cool idea for a 'ible I am working on and cannot wait to put it on the site. For now and as a first step (sorry, I am a newbie!), I am simply trying to build a simple stand with the following "inverted L" shape:- - - - - - - - - - - - - -||||(floor)Think of tje coat hanger in the picture below, only sturdier and with a single vertical pole (and without the wheels/mesh at the bottom). Also, the vertical pole does not need to be telescopic: as long as I can adjust the height of the horizontal pole I am happy. This could be done eg by mounting the horizontal pole on a "tee" fitting; but then how do I make it fix into a given position/height on the vertical pole (and still be adjustable)? (I had a look at this 'ible -- https://www.instructables.com/id/Third%2c-fourth%2c-and-possibly-fifth%2c-hand/ -- , but I don't understand how the tee fitting gets fixed into position: welding?)I am thinking of using pipes or PVC from a hardware store. My big question is: how can I get the vertical adjustment feature using such readymade materials? Thank in advance for any help!James KirinPasadena, CA

Topic by james.kirin    |  last reply



Difference Between Type L vs Type ACR Copper Coil

Hello everyone,    I was hoping someone can share advice, tips etc. I plan on getting 55gal steel drum & turning into wood burning pool heater. My question is about which type copper coil would work best, and still be safe to use. My son has Down syndrome and is very sensitive to cold water. We just spent around $1500 to get pool ready with a installed ramp for his wheelchair. We called few different pool people about a reg heater they want from $2500 to $3700. Mostly cause it would not be easy install lot of things in way, etc etc. oh and then add monthly bill. I don't mind the pool temp but my son does and he truly doesn't ask for anything. And if I could safely get pool warm enough for him then I want to at least try. so we really don't have the extra cash to go "normal" pool heater way but I've watched allot of vids on YouTube where they took a steel 55 gal drum, turned on its side and put the copper coil mounted inside at the top. These people would be able to increase temp by allot. Its labor involved but I'm home anyhow taking care of my son. I'm looking at using about 100ft. I can get 1/2 100ft of Type L $163.00 and Type ACR for $119.00. Anyhow Type ACR is much much cheaper then Type L.  Is there a real big difference? Big enough to spend the extra cash and use Type L, instead. Or Is ACR still safe to use with the pool? I'm not sure which Type L or ACR but I've read it say it's cleaned inside the pipe. Does this matter cleaned vs not cleaned inside pipe for what I would be using for? here link of place I'm getting https://m.grainger.com/mobile/product/MUELLER-INDUSTRIES-100-ft-Soft-Coil-Copper-Tubing-4WTC2?breadcrumbCatId=7726&fc;=MWP2IDP2PCP Please any info would be greatly appreciated. Truly thanks so much for your time. Thank Lisa

Topic by fst2011    |  last reply


I want to wire up L.E.D's to a motion sensor,? Answered

... so when you wave your hand in front of it, the led lights turn on for a minute or so. is this easy to do, i have done some wiring and stuff before but not too sure about this one, thanks ... ( the l.e.d's will be placed behind some double sided mirror acrylic, i have placed a poster behind the double sided mirror, and i want to hook it up so that when you wave at the mirror, or stand in front of it the leds come on and you see the poster, its for my final project at university, showcasing the poster... any help wll be greatly appreciated)

Question by superflye    |  last reply


I am new here guys

L am Annelove l would like to introduce myself to you'all, l am still learning here.

Topic by Annelove    |  last reply


barrel? Answered

I need a small (5 L to 10 L)wooden barrel for less then 35 $

Question by copper tube    |  last reply


Do i need a driver for a MTHF1000-WN L.E.D.? Answered

I ordered this (MTHF1000-WN) L.E.D. from the Marktech website. Do I need a driver to properly use it? If yes, what is the cheapest and simplest option. If no, is there anything you recommend I do to get the most out of it? Thanks.

Question by nadav    |  last reply


Headphone LED Question (HELP)

I have been making headphones and need some help. when wiring I soldered the red wire to the red wire, and the blue wire to the blue wire. It works fine but i wanted to add an LED, can I solder the led between two of the red wires? If I can't, can you tell me another simple way to wire one so it runs off the headphones? PLZ HELP!

Topic by NetReaper    |  last reply


This or That 2

Lets add some more fun to the instructabes Forums...Okay this is a simple but fun game!Instructions:A This or ThatAnd then the next person writes his/her favorite, and pitches a new theme!this is an Example:You write:Dog or CatNext person writes:Dog (<---That is their answer)Safari or Fire Fox (<----They pitch their own this or that)Next person who writes:SafariOld or New...you get the point now lets start!lllll v

Topic by Shifrin    |  last reply


What is wrong with my MineCraft Mod JavaScript?

I've been working on a BattleTech minecraft mod, and I need some help with my coding. I need to make a special set of armor to actually use the 'Mechs, but when I recompiled the code, I got 36 errors. A screenshot of the code is included. I am using MCP and ModLoader for MineCraft 1.0.0 Because it is hard to read in the photo, here is the actual code: __________________________________ package net.minecraft.src; import java.util.Random; public class mod_mechsuit extends BaseMod { public static Item helmet = (New ItemArmor(5000, 1, 5, 0).setItemName("asdf")); public static Item chest = (New ItemArmor(5001, 9, 5, 2).setItemName("asdf")); public mod_mechsuit() {   body.iconIndex = ModLoader.addOveride("/gui/items.png", "medvest.png")   helmet.iconIndex = ModLoader.addOveride("/gui/items.png", "neurohelmet.png")     ModLoader.AddRecipe(new ItemStack(body, 1), new Object[]{   "L L","RLR","LRL" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone   });   ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{   " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone   });     ModLoader.AddName(body, "MedVest")   ModLoader.AddName(helmet, "NeuroHelmet")   } } public String Version() {   return "3.14159265"; } } ____________________ EDIT: The Terminal error report is as follows: ________________________ ******-*******-MacBook-Pro:mcp50 ************$ bash recompile.sh == MCP v5.0 == > Recompiling client... javac -g -source 1.6 -target 1.6 -classpath "lib/:lib/*:jars/bin/minecraft.jar:jars/bin/jinput.jar:jars/bin/lwjgl.jar:jars/bin/lwjgl_util.jar" -sourcepath src/minecraft -d bin/minecraft src/minecraft/net/minecraft/client/*.java src/minecraft/net/minecraft/src/*.java  conf/patches/*.java failed. Return code : 1 == ERRORS FOUND == src/minecraft/net/minecraft/src/mod_mechsuit.java:6: ')' expected public static Item helmet = (New ItemArmor(5000, 1, 5, 0).setItemName("asdf")); ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:6: ';' expected public static Item helmet = (New ItemArmor(5000, 1, 5, 0).setItemName("asdf")); ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:7: ')' expected public static Item chest = (New ItemArmor(5001, 9, 5, 2).setItemName("asdf")); ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:7: ';' expected public static Item chest = (New ItemArmor(5001, 9, 5, 2).setItemName("asdf")); ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:11: ';' expected body.iconIndex = ModLoader.addOveride("/gui/items.png", "medvest.png") ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:12: ';' expected helmet.iconIndex = ModLoader.addOveride("/gui/items.png", "neurohelmet.png") ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:15: '}' expected "L L","RLR","LRL" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:15: ';' expected "L L","RLR","LRL" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:15: ';' expected "L L","RLR","LRL" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:15: ';' expected "L L","RLR","LRL" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:15: not a statement "L L","RLR","LRL" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:15: ';' expected "L L","RLR","LRL" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:16: illegal start of type }); ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: expected ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: illegal start of type ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: ')' expected ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: ';' expected ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: expected ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: expected ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: illegal start of type ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: expected ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: ';' expected ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:17: expected ModLoader.AddRecipe(new ItemStack(helmet, 1), new Object[]{ ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: illegal start of type " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: expected " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: ';' expected " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: illegal start of type " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: expected " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: ';' expected " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: illegal start of type " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: illegal start of type " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:18: ';' expected " R ","RLR","L L" Character.valueOf ("L"), item.leather Character.valueOf ("R"),  item.redstone ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:19: class, interface, or enum expected }); ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:21: class, interface, or enum expected ModLoader.AddName(body, "MedVest") ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:26: class, interface, or enum expected public String Version() ^ src/minecraft/net/minecraft/src/mod_mechsuit.java:29: class, interface, or enum expected } ^ 36 errors ================== > Done in 3.43 seconds > Recompiling server... !! Can not find server sources !! _________________________ What am I doing wrong? Link to official page: http://www.minecraftforum.net/topic/852900-battletech-mod/ Thanks in advance!

Question by AlternateLives    |  last reply