knex M16

Here it is my knex M16 auto reload,true trigger,and its cool! : ) plz tell me if i should post

Topic by darth acexxacer   |  last reply


Knex M16

Hello, this is my Knex m16. It held a good amount of ammo, had a removable magazine, true trigger, sights and it looked amazing. It was truly one of my best builds.

Topic by Blue Mullet 


M16 Replica

 

Topic by GrandeSwag   |  last reply


M16 Kits available today!

Kits for my m16 will be available by later today. The price is $30.00 plus shipping. Be sure to check KI's store. I'll have a link once its ready. http://www.knexinnovation.net/store/Bakenbitzs_Store.php

Topic by bakenbitz   |  last reply


Anyone know of a cool Knex M16 I can build? Answered

Looking for an M16 to make. I'm an M16 freak ;)

Question by JesseHughes   |  last reply


Ak-47 vs M-16.

I just want to know peoples opinion on which is the better assault rifle. personally, i prefere the ak-47 because of its better knock down power, ease of use and reliability. the only thing i can see what the m-16 has to offer over the ak-47 is its improved accuracy. what does everyone think the better assault rifle is?

Topic by ~KGB~   |  last reply


Knex M16 Vietnam Style review.

This is a review for silentassasin21's m16 review: looks:4,5 looks like a real thing. comfort:4 sometimes stick a blue rod in your hand. strenght:3,5 the barrel is a little weak,the rest is stong enough piece usage:4 not to much,but use a lot of green rods. innovation:2,5 the only innovation thing is the new mag. power:4 not bad for a replica. accuracy:4 good for a replica. reliabilty:4 if you have to much bands on it,then snaps the sight of and shoot into your face :P total:4 great gun by silentassasin21,build it and sub him!  

Topic by cool bas3   |  last reply


my jg m16 a4 airsoft gun is double feeding whats causing it.? Answered

My jg m16 a4 airsoft gun is double feeding whats causing it.?help

Question by coolpizzadude   |  last reply


Yet Another M4 Carbine

Well since everyone has been building m4's, I thought I'd give it a try. Originally, it started as just a model. After that, it became a RBG. Finally, it became a gun that actually shot pieces. It has a rather big magazine, it holds around 20 grey connectors. I'll only post this gun if it gets MANY requests. Credit goes to the TheDunkis for the foregrip.The gun is being posted on KI this weekend.POSTEDhttp://www.knexinnovation.net/forums/viewtopic.php?f=53&t;=351

Topic by bakenbitz   |  last reply


Scrapped M4

This is an M4 that I am working on. Sorry guys, I scrapped my old M870 RBG Shotgun for parts, but If I can, I will try to make this one shoot rubberbands, however, the main feature will be the realism (if pieces of plastic connected together in the shape of an M4 can be considered realistic). Some of the features will include an adjustable stock (the first of its kind), a removable magazine (shown in the first video, along with the stock), Adjustable sights* (maybe), open ejection port (where the shells come out on a real gun), a charging handle, that when pulled, will pull the bolt back, opening up the ejection port*, and if possible, I will make it so that a 30-06 shell will pop out of the open ejection port. I will hopefully be posting more movies showing the other features as I add them to the gun. Hope you enjoy! *Not made yet. Unterzeichnet,Mykhailo

Topic by Whaleman   |  last reply


I'm back

Hi everybody, I'm back. I got really into airsoft and real guns earlier, and neglected my K'nex. Sorry if I have not replied to your comments, I have not been on in a while, and your feedback is appreciated. Anyway, does anybody still want the M16? If so, I'll finish it off and post. Or, if somebody wanted to help me improve the internals, that'd be fine too. After that, I'll probably make a SCAR-H, as I just got an airsoft replica, so the K'nex version should be very realistically sized. I'll probably make it a realistic replica (Fake bolt, real style take down, folding/collapsable stock, etc, etc), and not a shooting model. After that, I'll remake and improve the LMG. IDK what I'll do then.  If nobody wants the M16, I'll just go to the SCAR-H. If nobody wants that, I'll go to the LMG. 

Topic by rec0n   |  last reply


Nerf M16 from scratch, i need help with ideas to create it?

 I am tring to make a M16 Nerf rifle from scratch since 1. I dont like their rifles and 2. I don't want to pay for a fancy rifle. Any ideas?

Question by MajorRockstar7   |  last reply


knex guns

Can anyone make a knex m16 or a auto uzi.

Topic by biggunner   |  last reply


Beginner airsoft? Answered

Yo 'iblers i was wondering what a good starter airsoft gun for under 50$ I would like it to be an AEG please. I have found a couple i like but i was wondering what gun that you guys would recomend

Question by alfpwns   |  last reply


Knex B.M.P. 41 Mk1 (Bullpup Machine Pistol)

This is my new idea of a bullpup machine pistol. It is really cool looking and awesome. But sadly it jams up whenever you try to fire it; let alone load it. If anyone can make this from the pics, and not make it jam up; show or tell me =D

Topic by beanieostrich   |  last reply


Favorite gun

This is were you con post what your favorite gun is :D

Topic by Johnhall44   |  last reply


Call of Duty - Knex Warfare

Hello fellow members and mates, I had an idea for a knex call of duty. It will feature many guns of real and not real types. Lets go to the guns shall we? The Weapons   Pistols/Sidearms SP-51 Desert Eagle Mk2 - link SP-60 Pistol - link  DunKILLMeZak - link IM-69 Slider - link MAGNUM - link SA-Revolver - link Halo 1 Magnum - link SAP - link WASP - link IFPP-5 - link RMP-8 - link  Halo Reach Magnum  - link OodaVolver - link Deviance - link Shotguns J5-Barricade - link M.O.S. - link AA-12 - link Breaker - link 9LRMS GDS - link BCS4FE - link BSAS - link SMGs/Machine Pistols P90 - link Kiparis - link G18 - link MP5K - link MP-605 Litemod - link TD-10 - link UMP-45 - link UMP-45R - link MP-40 - link Assault Rifles TR-18 - link Knexsayer - link ZKAR V2 - link AR-12 Prototype II - link G36C - link Ghost 3.0 - link FAMAS - link Handle Pump TR8 - link Halo 2 BR - link ACR - link AR-18 Prototype III - link AR-20 Prototype IV - link KLS V2 - link RAWR - link FA V2 - link SOBR-922 - link SSV F2000 - link AN-94 - link M4A1 SOPMOD - link SOAR-16B - link Callous - link SCAR-L - link K-2 FABR - link Gen 2 HAWC Bow - link REMPAR-2 - link TZKAR-18 - link Sniper Rifles/Crossbows R700 - link Creeping Death Mk6 - link SR-V2 - link Sipriani V3 - link  VSS Vintorez - link Springfield - link HAWC V10 - link Kentucky Rifle - link Punisher - link Raptor - link Creeping Death Mk7 - link Creeping Death Mk8 - link Creeping Death MiniBow - link Creeping Death Mk9 FE - link KGBSR - link Lightning Flash Sniper - link TH2BR - link Compound Bow - link SSCR IV - link Cannons Brickster - link Heavy Cannon V1 - link Heavy Cannon V5 - link A.D.U. Bazooka 1040 - link MGs M60 Machine gun - link M1919 - link KGBMG - link MTG1 - link Hidden Guns Z3 - link These are the weapons I think are perfect for knex call of duty. You can leave suggestions in the comments below. I might add your suggestion onto the List!!! Carry on =D  *What maps would I use for the gameplay; anyone got any ideas?

Topic by beanieostrich   |  last reply


Poll

Which one should i make? A m16 with some accessories grenade launcher maybe mag and charging handle or a true shotgun w/ mag and pump and should I post my sling shot sniper rifle with my own mech and low pieces

Topic by Katarukito   |  last reply


What I Have Built

So... It has been A LONG TIME since I last posted anything on instructables. To be exact my last comment was 20 days ago, so here is an update. Right now. I have. Bakenbitz (Atlas) - Model M16 in mettalics Dutchwarlord - Tar - 21 in classic, gold, colors Ironman69 - M249 (SAW) RBG in mettalics If you want me to post the SAW, I will, I just need alot of people who want me to because it is a big task. www.youtube.com/watch Video for the SAW Also there are my two airsoft guns.  A G&G; MP5 SD5 (400$) And a Kraken AK-47 (220$) 

Topic by bruce911   |  last reply


Broken AEG Airsoft gun, how do i fix it? Answered

During a match, the gun slowed down like the battery was dieing but now it wont hold a charge, and the trigger may be jammed its an M16 but im not really shure on the brand

Question by fishcake27   |  last reply


Is airrattle.com an ok site to buy airsoft guns on? Answered

I found a great m16 with a grenade launcher (green gas) and a drum mag there. I don't know wether the site is good however with there shipping or wrong order. PLZ HELP

Question by Football viking boy   |  last reply


UMP 45 review

Cheers to TheDunkis for posting this amazing UMP 45. Here is mine, in (almost) all mettalic pieces. I did change some things on the gun, all for different reasons. Change #1 - Bottom rail. Only so the foregrip could be stronger. #2 - Front sight. I do not have any mini pieces like TheDunkis. #3 - I used CuddesMcT's magazine with an internal mag pusher. #4 - Trigger guard. TheDunkis's trigger guard was very wobbly so i made my own with a bendy blue rod and a broken green connector. #5 - Rear sight. Once again, I do not have any mini K'nex pieces. #6 - Ramrod. I found the ramrod hard to pull back and tough to get to so i swapped it with one of my own. Notice that I also removed the top of the stock, for the same reason. I added multiple yellow connectors to where the ramrod ends, which are only neccesary for use with my ramrod. #7 - Handle. The handle was wobbly, which TheDunkis does state in his instructable, so I rigged it so that the handle connects to the stock. Overall, this is a wonderful gun which is very realistic, except for the full stock which is not true to the UMP 45. I am not going to say specific stats, but the range was good, power okay, and accuracy good. Click here for the link to his instructable.

Topic by chopstx   |  last reply


like war tanks and trucks

List: t-74 jsdf type-74 main battle tank m8 ww2 u.s. m8 howitzer motor carriage jeep ww2 u.s. willys jeep greif ww2 german isdkfz 250/3 halftrack t34 ww2 russian t34/85medium tank sherman ww2 u.s. m4a3 mediun tank M16 WWII U.S. M16 Multiple Gun Motor Carriage PANTHER WWII German PzKpfw. V Medium Tank TIGER 1 WWII German PzKpfw. VI Heavy Tank P40 WWII U.S. Curtis P40 Warhawk P38 WWII U.S. Lockheed P38 Lightning P51 WWII U.S. North American P51 Mustang F-14 TOMCAT U.S. Navy Grumman F-14 Tomcat P-3 ORIAN U.S. Navy Lockheed P-3 Orion CHURCHILL WWII British Churchill Mk.VII Infantry Tank POST?????

Topic by knexsuperbuilderfreak   |  last reply


My newest gun

This is my final version of this gun. It was originally called an M16 but it doesn't look like one anymore. There are removable clips that you can pre-load, the front grip is detachable as is the top sight rail. I'm posting it on KI at the end of the month. Instructions have been posted http://knexinnovation.gigacities.net/forum/viewtopic.php?t=199 http://www.youtube.com/watch?v=qWQf0xlWzfg

Topic by bakenbitz   |  last reply


New Starwars knex gun?

'm sure you guys know about starwars battlefront ll,well i wanted to make a gun from there but i thought it would be too hard. You guys get to chose (Sniper) http://starwars.wikia.com/wiki/E-17D_sniper_rifle or (Blaster rifle) http://starwars.wikia.com/wiki/Blaster_rifle . Put your choice in the comments i will start building when i get 5 requests for one single gun like 5 for Sniper or 5 for blaster rifle

Topic by Flatout Knex    |  last reply


Avr help

Help me in Programming my Avr...... Ques :- How to program avr using BRiCS Development board (avr 333) and usbtiny. I am new to avr programming....? When i used avr dude and entered following command i got this :- command by me ::    -c usbtiny -p m16 -P usb Avrdude's response :: avrdude.exe: initialization failed, rc=-1 Double check connections and try again, or use -F to override this check. Do i need to give external power to the board or it uses USB's Power supply....... WHY IT IS HAPPENING. Pls Help me.....

Topic by techieman   |  last reply


Help me in Programming my Avr......

Ques :- How to program avr using BRiCS Development board (avr 333) and usbtiny. I am new to avr programming....? When i used avr dude and entered following command i got this :- command by me ::    -c usbtiny -p m16 -P usb Avrdude's response :: avrdude.exe: initialization failed, rc=-1 Double check connections and try again, or use -F to override this check. Do i need to give external power to the board or it uses USB's Power supply....... WHY IT IS HAPPENING. Pls Help me.....

Topic by techieman   |  last reply


knex full auto

My design for a new machine gun i would like to know if i should post it uses the mag/hopper from OSNJCKMA2 stock from M16 slightly modded the new rack and pinion design by bakenbitz i have clipped them all together and it looks ok. its a bit flimsey so any one can modify it. you can put the stock pushing into your shoulder or resting on top so it looks like a rocket launcher. it shoots blue rods about 10-20feet with 2 weak rubber bands. i've used a hand crank so it can be more powerful. question is should i post it? hope you like :)

Topic by acker123   |  last reply


what should my new knex assault rifle have

Choose from the list of things that my new gun should have on it or with it. pick 1 from each section apart from the 1st one because I could try and put all those things in. some kind of rails like Ironman's (ill try and make my own) adjustable stock adjustable cheek rest fake charging handle if you can think of other things please say! what ammo should it use rods yellow blue white green grey red black connectors grey orange grey and orange joined together (like my m110 and scar) what should the gun look like M4 m16 scar Xm8 m468 hk416

Topic by nutty guy   |  last reply


please help with airsoft bbmg portability

My little brother and his friend always beat me at airsoft not because they are actually better than me but because they have 2 echo 1 m16s and unlimited rounds while I have 2 spring pistols and 500 rounds not playing is not an option because my parents are the kind that always say (insert random phrase) will build character also, I have virtually no $$$$ which means getting a good airsoft gun is out of the question. well I am frankly tired of the slaughter and want to get them back (preferably with quarter sized welts) now I do have a bbmg made of pvc pipe but the only problem is that it is attached to an air compressor I am currently researching ways to make my bbmg portable and still leave welts I really need help with this one so please help me Instructable-wan-konobi you are literally my only hope.

Topic by fidgety2   |  last reply


Heckler&Colt "G16"

This is a cross between a HK G3 and a Colt M16. It doesn't have a magazine right now because I am too lazy. It is ,however, a sear system gun, so it has a "true" trigger. I haven't tested ranges yet, though it seems pretty powerful with blue rods. Hope you enjoy! ==UPDATE== 8/18/07 Sorry for those who liked the foregrip, it is gone...... REPLACED BY A GRENADE LAUNCHER!!!!!!!! Inspired by Loosewire's disc magazine, it can fire a shotgun round of about 10 blue spacers, or a slug round of a disc. The GL has a vertical grip, gut the gun will also have a horizontal foregrip as well. The GL works like a catapult, where the ram is pulled back and cocked, and instead of hitting or pushing the round out, the round is launched from the shear force of the ram suddenly launched, like when the light suddenly turns red and you slam the breaks on your car. ==UPDATE== 8/19/07 The GL is out of the prototyping stage. Now it has a trigger, located under the normal trigger.Danke,You

Topic by Whaleman   |  last reply


Another Challenge from TD

This is another quick idea I got just because I'm kind of curious of what you guys would make. Basically all you need to do is make a realistic looking gun that isn't actually a real gun. You can base separate parts off of other guns if you want (like using M16/4 magazines for example) but try to make it as unique as possible. Make sure it would seem like something that could actually be made. Give as much fake barrel as needed depending on the type of gun. Also make sure it actually works for both loading and firing. If you have any "futuristic" concepts that still seem possible and not so far-fetched (kind of like the super v concept) you may include them as long as if you give a basic idea of how it may work. I'm also interested in features that make them look even more like a real weapon such as removable magazines and mag releases, charging handles (fake or not), selector switch, sights, etc. Shells would be another cool feature but not required. Anyone up for it? I'm thinking of making something myself.

Topic by TheDunkis   |  last reply


Speaker headphone disconnect for mP3 player with amplifier and headphones

Hi, I am working with a Flyron FN-M16 MP3 player module which has both output for headphones (pins 4,5, and GND = 7), and a 3-watt amplifier for speakers (pins 6 & 8).  The problem I am having is that I am unsure of how to disconnect power to the speakers when headphones are plugged into the jack.  This is easy when you have a separate amplifier circuit, but here the amplifier is built in. The easiest solution would be to find an audio jack with an isolated NC (normally closed switch) to disconnect the speakers.  They do not seem to make them in SMD packages.  I have found a 3.5mm stereo audio jack with an isolated NO (normally open) switch from Technik.HK.  Is there a mosfet type circuit that I can use to disconnect the speakers when the NO switch is closed without introducing any distortion to the speaker sound?  Any advice for an electronic disconnect?    P.S:  The manufacturer has stated that if I ground the speaker outputs for the 3-watt speakers I will blow out the internal amplifier on the flyron Mp3 player board.

Topic by Meek_The_Geek   |  last reply


How to make a BB gun turret? Answered

Hey guys! Basically, i want to make a kick-ass BB gun turret. I have 2 big guns that look like the M16 (automatic) I want to make a turret that will scan for people/objects and shoot them when i say so (so i don't kill my cat). I have money, skill (I have made my own electric tricycle) and time. I was thinking that a combination of the Mindstorm NXT, a webcam and an RC car would do the trick. Here's some details why i think so: Mindstorm: Detects motion and can turn the turret 360 degrees when i say so. RC car: can pull trigger and also turn the turret 360 degrees Webcam: I wanna be able to film/see the person i shoot. Any thoughts on this? If you know a way that will allow me to exclude the NXT that would be great. Also: I'm 14, i live in China, Servos are harder/impossible to get by, and my parents are supposed to know i'm making this (i'm making this for a "client"...) Edit: Won't be needing the NXT... Still: anyone have any good ideas?

Question by theman123321   |  last reply


Subscribe to me, then ill subscribe to you!

Simple, just subscribe to me, then ill subscribe to you! also, heres some of my work over the months! if you have any questions on any of them, feel free to ask! 1: bren lmg 2: grenade 3: pocket pistol 4: heavy cannon v5* 5: tape dispenser 6: ball machine 7: m1 garrand 8: vss vintorez and tiny oodammo pistol* 9: ball machine 10: nano gun* 11: halo 1 magnum 12: halo 1 assault rifle 13: ball machine 14: m16* 15: m4 s-system 16: zkar* 17: dual revolver pistol 18: ball machine 19: p90 20: zkar* 21: ball machine 22: mp5k* 23: tr18* 24: BAW* 25: ball machine 26: ball machine 27: p90 28: sr v2* 29: ball machine* 30: KGBMG 31: KLS v2* 32: ball machine 33: triple tape dispencer 34: tr8* 35: KGBSR 36: bullpup crossbow pistol 37: WASP* the ones with stars beside them are not my ideas, although i may of modded them...

Topic by ~KGB~   |  last reply


Yet ANOTHER K'nex Gun!

Before commenting, be aware that i got rid of this. hahaha Sorry, no pictures yet. The rest of my family (all of the girls in the family) went on vacation down in SC while us manly men went to manly places like tool shops (hahahottopic jk) like home depot and water country usa. And sadly, they took the only camera with them. Their coming back tonight so I should be able to get some PICS of this ttly 1337 gun. Enough of this talks about my life onto the gun. Like I said, I can't take pictures, yet, so I'm just going to list the features from the butt of the gun to ze top. 1. Comfy, buttstock, and a stick type stock w/ ram guide 2. New 2-position realistic angled handle (one position for m16 series standard grip, and another a bit more angled) 3. kinda weird for-grip thing but it's good I guess 4. easy to use scope mount and blade sights 5. around 10-15 round blue rod mag 6. and my favorite part of the gun, the Hop-up! 7. I wouldn't consider this a feature but it looks a b s o l u t e l y bad***. You'll see. just wait... A hopup is basically a bump in the barrel causing the bullet to curve up thus making it hop up. Originally from airsoft guns it presses down on the BB as its leaving the barrel creating a backspin so when it leaves the barrel it curves up increasing range and making it more accurate. Except this doesn't apply to knex bullets since they tend to move MUCH slower and the barrels are their are dents in the middle of them. So with knex you'd have to just put a small dent type thing on the bottom of the barrel instead of backspinning it (which is impossible with knex since their not in a sphere shape). If you really want to know more about hop-up heres a link http://ezinearticles.com/?Hop-Up-in-Airsoft&id;=589601 And finally, sorry I have been so inactive lately, I have been extremely busy more then normal.

Topic by Owenmon   |  last reply