Search for NERF modification in Topics


Nerf Modifications and Paint Jobs.

Hello, I just thought I'd share the last few months of completed work with my fellow makers! I'm addicted to modifying and painting Nerf guns now because its something you put a lot of time into that is used regularly. It doesn't gather dust or become a paper weight like my previous model car hobby.  Anyway enjoy, and thanks for looking! More pictures can be provided if you're interested. JonnyBGood

Topic by JonnyBGood    |  last reply


Nerf Gun Modification Services

Hey all. I've been modifying nerf blasters for about 2 years now, and would like to make my services availbable to everyone. From integrations to breeches, you can find it here. I'll be willing to modify the following (to a certain extent on some blasters): Nightfinder Maverick Big Bad Bow Longshot Recon Switchshot Airtech 2000 Titan Scout My contracts will consist of a blaster that you send (or the money FOR the blaster and service). I will then perform the modification and send it back to you. Or, we can discuss the type of blaster you're looking for, make it a suprise, THEN talk prices. http://s588.photobucket.com/albums/ss330/homasimpson/?action=view&current;=Movie.flv http://i588.photobucket.com/albums/ss330/homasimpson/CopyofCopyofNerfCrap005.jpg http://i588.photobucket.com/albums/ss330/homasimpson/Image-22.jpg http://i588.photobucket.com/albums/ss330/homasimpson/Image-19.jpg http://i588.photobucket.com/albums/ss330/homasimpson/IMG_5534.jpg http://i588.photobucket.com/albums/ss330/homasimpson/Image-1.jpg http://i588.photobucket.com/albums/ss330/homasimpson/Image.jpg Copy and paste those links into your browser, they're pictures but I don't know how to attatch them. Also willing to do paintjobs and detailing. Contact me at chris11995522@aim.com or I/M me via AIM.

Topic by Chris11995522    |  last reply


Nerf N-Strike CS magazine mode

To keep a long story short, here is the problem I'm trying solve:  I'm in the process of moding  a Nerf N-Strike into  a coil gun.  My "ammo" for this are steel archery tips that measure 8mm in diameter.  Since I'm overseas right now and have to order the gun online, while I wait for it to show up, I'd like some input as to how I might increase the magazine's spring strength while narrowing the inside width of the magazine to accomodate the diameter of the of new round.  In the past I've tried small pieces of foam board and plexiglass, but that has a tendancy to get messy and cause too much friction.  I'm sure once I have the gun to look at and play with some "great idea" will come to me, but until them I'm stuck imagining.  Any help would be appreciated.

Topic by TM7677    |  last reply


what should i name this high powered discshot? Answered

It gets 70 feet with a stephan

Question by SorryBarry    |  last reply


nerf paint job and modification thread

This forum is for pictuers only you can include the range and modifications if desired the pink yellow and white disc shot is my secondary and it gets 70 feet with a stefan the blue and white bbb is my primary and gets 120 feet with a stephan 

Topic by SorryBarry  


My nerf gun mod fails?

So I got my Nerf Longshot a few years ago and I decided to mod it. I went and removed the air restrictors. Being Really Excited, I went to go test it out. It turns out that it made the gun shoot half as far with almost no force. What's going on???

Question by General Eggs    |  last reply


Nerf Mods

There are so many different nerf mods for ALL nerf guns, But the question is "Which one brings enough power to make a nerf gun shoot far and fast with better accuracy?" Answer is all them, if you put all the mods for one gun into one gun you are going to get a great outcome unless you do the mod bad, take a Recon CS-6 for instance it is a low power nerf rifle not good for wars at all shoots around 20 feet but, mine has been modified and i am currently looking for different modifications for it but it shoots more than 80 feet  measured, exact results are 80 on most shots 1/10 shots shoots around 50 and that is because it was a BAD DART, here is what i did, (P.s: this will be a instructable for the mods in this....) 1 Removed AR 2 stretched out spring by plunger ( not recomended get a new spring if  you can ) 3 put a spring behind plunger to create more friction which pushes the barrel  forward more and causes a stronger air push. 4 made the air tube bigger by the AR with a drill Thats all i did it was easier than most mods i have done ( iremember the maverick i had no idea how to get into the roatating barrel) but it led to the best outcome, P.s doing the same thing makes the Raider CS-35 alot more stronger it will more than likely shoot 90+ I will be getting a longstrike soon so i will show you guys the AR Removal and other mods i know which can be applied to the gun and create another great Nerf Sniper Rifle, Later guys.

Topic by AirsoftTeam  


Airsoft Watergun Modification

I was wondering if anyone has ideas if and how I could convert Airsoft, Nerf, etc. into a more realistic water gun. I was thinking some ideas of being able to shoot these guns, with red dyed water, without a need to wear face or body protection. Magazines could be the storage of the water, and lower fps so, as my main point, was to not wear protective gear. If anyone knows anything, or a website I missed, I have searched everywhere and found only water guns to Airsoft. Thank you for your help.

Topic by zombiefinatic  



Firefly Flashlight Mod

I have figured out something useful without making the firefly ugly. First, take out all of the screws, and start mapping them by the nerf's shape. Sorry I have no pics, but I want this to not take three days. Take out the pieces that support the barrel. Draw a map if you have to, because this can get very annoying to put back. take out the barrel with the supporting orange piece and throw away the orange front piece. This may reduce slight accuracy, but you can now use sonic micro darts, and you need to to do my 3rd to next mod. Unscrew the back of the barrel. take out the piece. Unscrew the 3 screws on the back, too. Make sure to keep mapping. Unsrew the last front screws. Get small pliers or a large screwdriver and pry it open, going all around. Take out the springs and the 3-pronged pieces. Put the barrel back together. Take out the air pump and stretch the spring. Put back the gun, using your mapping. Now, for the fun part. Drill a hole through the center of the barrel, big enough for your flashlight. You are done. Have fun.

Topic by Fenderpony    |  last reply


cs-6 recon?

If anyone has a good modification that will 100% definitely work for the new nerf recon, please tell me.

Topic by Fenderpony    |  last reply


Does Stefan (modifed nerf bullets) work with stock nerf guns? Answered

I looked at backer rods and they have aren't hollow. The regular stock nerf bullets are. The stock nerf guns have a little stick pointing out so you can put the bullet onto it, but since Stefan bullets aren't hollow they can't go onto the stick. So my question is "Can I put Stefan bullets unto un-modifed nerf guns?"

Question by Pizzapie500    |  last reply


Pen gun nerf mod collaboration

While searching Instructables, I have found an Instructable about the infamous Pen Shooter. I have thought of a way to convert this to a Nerf dart shooter (I think) but I have not got the materials to make it, so I don't know that it will work. I would like it if somebody who has the materials could collaborate with me on this project, and help me make it an Instructable. Materials needed: Texta Rubber band String Glue CPVC or brass pipe (barrel mod materials) If someone wants to collaborate, I will PM you back with the method. Thanks, Chaoszerom

Topic by chaoszerom    |  last reply


Where to find the right spring? Answered

For my Nerf Gun Mod I need a 14kg load spring. After a VERY long time of looking I've come up empty handed. Where on earth am I going to get a spring for my longshot?

Question by General Eggs    |  last reply


My nerf vulcan won't fire anymore can someone help me?

I used my nerf vulcan EBF-25 for a long time, then one day it just stopped working. I opened it up and fixed the tooth moves the belt advance wheel, then I put it back together. When I tried it in full-auto the belt advance wheel wouldn't move, and the firing mechanism wouldn't work. Oh and the only modifications I made on it was conbineing the two belts and pounded out the air resistors from the belt. Any help is welcome.

Question by Nerfgenius    |  last reply


Selling Super Modified Nerf Longshot (AR Removal,Locks,LEDs,Spring,Paint Job)

Hi! I'm selling this super modified Nerf Longshot. The paint job was based off of Coop772's paint job that he did. The mods I did to this is listed in the video. I did take a few pictures from SGNerf and Coop772 because I forgot to take a picture of some of the internals and I already put the gun back together. If you have any questions feel free to comment below. Thanks for viewing! Video of this (video embed code doesn't seem to work): http://www.youtube.com/watch?v=zyH-N6wm16A  

Topic by Pizzapie500    |  last reply


What's the diameter of the NERF Longshot CS-6's barrel extension?

I'm currently using the existing Longshot barrel extension for my Recon, and I want a replacement for that to put one on my Longshot to make it look like a... well, a Longshot. If possible, could anyone recommend me a diameter that would fit snugly and yet still be able to be removed? I don't want it falling out while firing or holding, or not being removable.

Question by cld0000    |  last reply


I have a few nerf guns, anyone know any good mods?

I have a couple of nerf vulcans and a nef long shot, all of them are to be modded. if anyone has any good ideas or does this kind of thing often i would much appreciate your help. i am open to most anything concerning the modification of these nerfs.

Question by IamGOD Biotches  


recon pipe problem

I want to get the air restrictor out without damaging or drilling the + thingy piece inside. Any ideas? If you do, please tell me because I am getting pretty sick of it being in the way. I cannot find out a single way. I show the right piece from a different mod to the right that I do not want broken. Will cutting the pipe and hot-gluing it work (only 100 percent definitely)?

Topic by Fenderpony    |  last reply


Nerf value/ quote modified raider,?

Ok so this raider has had the orangemodworks stage one kit installed, obviously iv removed the air restricter the barrel has been replaced with a smoother double length copper one, and iv sealed the breach, as well as the paint job, just wandering if anyone can tell me how much it's worth?

Question by milamber  


The NIC

I am a proud owner of many modded and unmodded nerf guns, and would like to expand the nerf online community to Instructables. I see we already have some members that nerf such as Top Dog, Vaunpaun, CaptainSlug, Biggunner, and many others. I would like to see much more Instructables of modifications and such. Thanks, nerfer192 p.s. if clare if you say anything I will personally get Eric to delete your butt.

Topic by nerfer192    |  last reply


Small stripped screw in Nerf maverick?

I've recently bought a Nerf maverick with the intention of modding it. There's just one problem, one of the screws is stripped. It's the screw in the front of the gun on the top. It's in a little hole and I don't really want to try to drill it out . Any suggestions? UPDATE: I have no idea how to delete questions, but I just drilled it out.

Question by General Eggs    |  last reply


Custom Painted Nerf Guns (Looking for Offers)

Hello!  I'm JonnyBGood, and I'm looking to accumulate some offers for my custom painted Nerf guns. I don't plan on going as far as commissions, I just want to see if there's any interest in my work for the right price. As of right now I'm mainly checking the market, before fully investing in making more custom Nerf guns. When making an offer, please send me it in a PM and make sure to consider that I've spent a minimal of five hours of painting. Also consider the cost of the blaster and the time required to make modifications. In my state, the minimal wage is around 8$ so I will ignore any offer that has me literally working for free. I hope that this works out and I receive a lot of reasonable offers so I can start painting, and then I will definitely get back to everyone who has sent me an offer.  Thanks for checking out my latest endeavor, and I hope my received feedback allows this to be successful!  JonnyBGood

Topic by JonnyBGood    |  last reply