post or not

Want me to post the sgt`s ak-47 it is very powerful.

Topic by T-man   |  last reply

post it?


Topic by ryan knexer   |  last reply



Topic by stlrams28   |  last reply


Yay! finnaly posted my semi-auto knex gun i think its a new design because it uses a hammer :P be sure to check it out!

Topic by ryan knexer 

First post!

. Hi, everybody!

Topic by NachoMahma   |  last reply

Reply, and posting

I have been having intermittent problems posting either to the forum or as a reply using either Chrome or FireFox.  It seems to have gone for now, so I am not sure whether that means it MUST be on my end, or that something is not loading properly sometimes when I sign in. 

Topic by Goodhart   |  last reply

How to post

Hey, how do i post an instructible into a group i created? and also how do i post into a grop i joined

Topic by Kendallkip   |  last reply

binding post

I need some binding post/banana posts (preferably something that an aligator clip can easily attach to). Does anyone know a cheap place? The cheapest were about 30 cents apiece, but shipping was like 5 dollars, if this is the cheapest then I'll buy it, just that I don't want to.

Topic by guyfrom7up   |  last reply

Posting An Instructable

I published my instructable two days ago and it is still not showing... What should I do? By the way it says published on my account.

Topic by jollyrunner   |  last reply

PVC Post

Hi, I'm a soccer coach.  I'd like to make some inexpensive posts to serve as obstacles/markers that I can use indoors.  I have 5' pvc pipe, but can't seem to locate or concoct something to hold the posts upright both affordably and that aren't too wide to get in the way of the players or the soccer ball.  Ideally, I'd have something that is only a few inches wide with a 3/4" hole in the center to hold my 3/4" pvc.   Thus far, the best thing I can come up with are a few 2.5/5lb thick plastic weight plates where the center hole happens to be just about 3/4" wide.  Those seem to quite difficult to come by though!  The next closest thing I've found were either heavy steel flanges or rubber mounts specifically designed to hold plastic posts.  At $8 or more/each though, I was hoping to find something a little less expensive. Anyone have any ideas? 

Topic by DDallen   |  last reply

Negative posts!

More negatives. Here I caught a screenshot of a negative post number. Reminds me of future posts dilema. Maybe when you get rid of them one place, they move. Ha ha.

Topic by gimmelotsarobots   |  last reply

Words will not post

When I make an instructable, I type a big long paragraph and then hit preview. Then the preview page is blank. I hit edit again and the words are still there. When i posted my instructable the words are gone, but people are posting already so what do I do????Part of my instructable is missing

Topic by Johnny Rex   |  last reply

Future posts?

Is it just ,e or (at this time) did tech king post comments over -300 minutes ago?

Topic by guyfrom7up   |  last reply

When Was It Posted??

Is it just me, or did the instructable "Posted On" date get taken off of the pages? Why? Just curious, Jeff

Topic by AptPupil   |  last reply

instructable not posting!

My instructable "the pyro system" is not posting. its published but not showing. its been days now, whats wrong? please help

Topic by budsiskos   |  last reply

Suggestions for this post

Hello, i recently posted this instructable, please suggest tips to get better at this post since it wasn't featured and how to avoid those mistakes in future,thank you!

Topic by MissionCritical   |  last reply

can't post

When i click on post reply the little twirl around starts and continues for as ling as i leave it on. it never posts. i feel i have a lot to contribute with 50 years of electronic experience. i teach electronic theory to those people wanting to obtain their ham tickets. my posts are always nice. i don't get it.

Topic by kadris3   |  last reply

instructable not posted

I tried to post an instructable over a week ago and its still not showing up anywhere on instructables.

Topic by budsiskos   |  last reply

posting diagrams?

I have lots of designs i have not gotten around to building can i post the diagrams as an instructable?

Question by ishner   |  last reply

Instructables are not posted

There are quite a few of us out here that have made instructables, it says that its published, but when we look it up, it is not there. PLEASE HELP

Topic by Wingmaster700   |  last reply

can't post!!!

Ive had spotty posting lately. every once in a while, the site will bug up and it will say "bad gateway" or something. Is it just me?

Topic by Epeoples   |  last reply

Posting Limit

Wondering if there is a posting limit for Pro members. I know in the past if we tried to upload more than 3 instructables on any given day (with our non-pro account) we got an email telling us we couldn't.

Topic by powerbookmedic   |  last reply

Posting comments

I've avoided making any bad comments, but even tho I'm signed in, I can't make comments any more.

Topic by snoopindaweb   |  last reply

BAW is posted.

For those of you who don't know, I posted Dunkis' BAW. Here. I just added a 'modifications' section too. Here.

Topic by travw   |  last reply

Slow Posting

Hi guys i published an instructable 3 days ago and it hasnt come up yet is there a problem with it or do i need to resubmit?the contribution in question is this one

Topic by lennyb   |  last reply

Posting a picture

What does it mean when it says "main image is required to publish"? Also, how do i do it? I thought it would be in the "attach a thumbnail" segment but i have no idea how to attach an image...

Topic by jlocker   |  last reply

post spam

I have 494 comments on April 10, 2010 EST spam here to be my 500th commenter

Topic by cj81499   |  last reply

Trouble Posting

I have been having extreme trouble posting anything (comments, forums, Instructables) for some reason instead of opening the link for the comment box, it just refreshes the page. I can't upload anything either. This isn't happening on YouTube. Any ideas what's wrong?

Topic by KentsOkay   |  last reply

post a poem

Enter a poem that you have made up not one that you copy and pasted, keep it on topic please. 

Topic by golddigger1559   |  last reply

OK to post?

I made a suppressor/ recoil compensator for a Umarex Steel Storm bb repeater pistol and would like to post the how to. Is that OK? It is relatively esy to build, and being made from household and hardware store parts, it is very inexpensive as well.

Topic by gtfoxy 

Posting to pintrest?

I was looking for an easy way to pin my instruct able to my pintrest account.  When I try to pin it, the only photos that come up are the ones for the add on my instructable.  Any ideas of how to get around this?  It would be great to not have to write it up separately. Thanks!

Question by mybell125   |  last reply

Is it ok to post it?

Hey Instructables! So a couple of weeks ago I finished a year long project, automating my room. The project is completly modular so if any piece burns out or fails you can quickly switch it, the project includes automatic lighting controlled via a PIR sensor, an LM35 controlled fan, a miniature green house controlled by another LM35 and it displays the info about humidity and temp, through a 16x2 lcd and DHT11, a combination lock for my door via a keypad, a infrared control that can turn on or of my desk lamp, alarm clock, room lights, solder station and has the function to turn the whole system on or off, it also includes a modified Sony alarm clock, that has a TDA2040 amplifier with aux in and its connected to some speakers around my room. I have all the eagle files and ready to print pdf´s. Everything is controlled by 2 DIY arduinos. I made most of the modules for the sensor array but a couple of the controll modules were made using already existing files on fritzing, and the DIY-Duino Should I redesign this modules and controller board before uploading, or will crediting the authors of this parts will do?

Topic by GG_Beta   |  last reply

Cheap Easy CNC: To post or not to post?

That is the question. It will look something like the one pictured, and will be a combination of this, this, this, this, and many months of research. It will be cheap, under $300 easily. I want to know if I should do an 'Ible before I make it so I can take pictures. What do you think?

Topic by snowpenguin   |  last reply

Double Click to Post

Recently i've been having to double click on the post button to get any posts on the Q&A or Forums to post. It's like the site isn't receiving the first click. It's happening across multiple PCs in different locations (ie miles apart). I've cleared internet and java cache with no change. Before this was happening i'd post a comment and the comment would be posted and the text field would still show what i had typed.

Topic by mpilchfamily   |  last reply


When I try to publish it says,"enter at least 2 keywords.  I do that and the same error message appears no matter what words I use.

Topic by RayJN   |  last reply

My instructable post

Okay so I made an instructable and published it and everything but it still has Zero views and i posted it aa while ago. Also Whenevr i log out of this account and then try to find my instructable i can not find it. It my instructable private it to me or what. Whats going on. Thnx

Topic by north33   |  last reply

Halloween Post Card

Does Eric still send out Halloween Post Cards? I miss those.

Topic by Yerboogieman   |  last reply

ideas of things to post

Hello there! its been a while since ive been on this site and im looking for things to post, so i decided to make a forum where if you want me to make/post stuff you can leave your idea in the description area below, NOTE: i would most likely only do things involving knex, legos, or basic instructions via text and pictures

Topic by mr. 707 

Post not showing up

Hi, I published an article on Saturday and it's still not live two days later. I've sent the team an email and tweeted at them but no answer. Any help appreciated.

Topic by Go Repairs   |  last reply

Post your Workspace

The question is simple: Where do you do your DIYing or MAKEing? Pictures of my area below.

Topic by Firebert010   |  last reply

Should I post?

I made a paintball extra parts/problem kit.Should I post? DUHAnyone find this useful? DUHShould I post a begginers guide along with it too? Um?Help, I will love any feedback!

Topic by mg0930mg   |  last reply

Where are Contests posted?

Where are contests and competitions posted?

Topic by LoneWolf   |  last reply

comment posting not working

I cant get my comment to post. i have tried to post it multiple times and it doesn't post

Topic by emms85   |  last reply

Moving blog posts?

Can I move a post from blogger to instructables?

Question by Linda Theil   |  last reply

posting pictures for a avatar

Yeah im new and need help so please post and reply

Topic by the-weird   |  last reply

Post Bugs Here

Post bugs you find here.

Topic by leevonk   |  last reply

GOODHART post an instructable!

Post one NOW! lol.

Topic by DELETED_DELETED_kruser495   |  last reply

should i post? Answered

thats the vid so should i post???

Question by c101   |  last reply

Post button not working

The "post comment" button on some 'ibles and the "reply" button sometimes are unresponsive and when they do work are sluggish. What is wrong?

Topic by waterlubber   |  last reply