Somethings wrong with Instructables! (Check out the pictures) Any ideas?
Topic by GorillazMiko | last reply
Ok so whenver i comment on someones instructables or topic it doesnt alert them or sometimes even show up. i dont want to reset my account or have to use a new one. please fix this. it is making me very mad. i domt want to be rude but after every update tnings keep getting worse with this site. there are more problems. thank you, please fix this very soon or im gonna have to move to a different site
Topic by innovanna
I have a Sony PSP that I have had for about a month. I have been playing multiple games. Then, one day my PSP would only read one disk. You could select it off the main menu of the PSP, but it wouldn't load. It makes clunking noises when you load it the game that won't work. Any help or suggestions would be appreciated!! Thanks!!
Question by Goalie1 | last reply
I upgraded Firefox to the newest version a week or so ago and I have been encountering problems in Google Docs and Pandora. Google Docs shows an error message (pictured below) and Pandora loads for a bit then displays an error message (also pictured below). Both sites work in Internet Explorer on the same computer. I can't find anyone else encountering this problem online. Any advice as to how to fix this? Thanks, Noah
Question by noahh | last reply
I'm trying to add a photocell light sensor to a device that sits under a liquor bottle that lights it up Only when it's dark. However the photocell (or at least I'm pretty sure it's a photocell) only completes the circuit when there is light shining on it, rather than when there is not. I removed the photocell from a broken night light that's been gathering dust in my junk cabinet. The night light logically lit up at night, but the sensor seems to be doing the opposite. Does anyone know what component I would require to reverse the effect of the cell? The first picture below is the circuit wired simply on a mini breadboard with a LED to test for continuity. The photocell is the only other component on the board, and is causing the LED to shine dimly. The second picture has a light shining on the photocell. It is hard to see, but the LED is lit much more brightly. I want to reverse this effect. All suggestions are welcome!
Topic by Firebert010 | last reply
I am trying to write a program that calculates pi. I am doing it in Visual C++. I am using the Gregory-Leibniz series. My problem is that I cannot figure out how to do the division necessary. It isn't returning decimals. For example, 4/3 returns 1, and 1/2 is returning 0. Is it even possible to get it to return decimals? I've tried using int, float and short as the answer variable and none worked.
Topic by puffyfluff | last reply
I have a problem with spam i have been recieving. i have been getting mail from somebody who has managed to give it MY address, and it has no actual unsubscribe link. this is illegal in many ways and is an irritation to me and probably any other person who has this problem. please advise on how i should try to fix this problem.
Question by mettaurlover | last reply
I'm having problems downloading PDF's. When I click PDF in the second link, the page opens on a new tab reloading the second link's page effectively looping. Since I have just 'upgraded' to Adobe ver 9.1I had wanted to know if this is a temporary site problem or just me.
Topic by Karroo Oakey | last reply
Hello all of you, i have a problem with DIY cnc. I guess missing steps? I would ask you to give your opinion? On pictures you can see CNC, and problem. Circle is not closed. I try with backlash in mach and i get a bit bether result but still not perfect circle
Question by bciric | last reply
Hey, I'm trying to make my 2nd instructable but i am having a HUGE picture problem. I loaded all my pics into my library, and when i click and drag them into the image slot, they stay there. I can even write captions for them. The problem comes, when i want to save. I have tried saving and previewing, and saving and going to the next step. It seems that my images get deleted every time i go to a different page. Please help
Topic by KevinSaw | last reply
hello, i have helecopter and i wanna add some device that make battery gives same current depend on throtle for any voltage, i have problem the problem is that when battery is full charge the throtle differ than when its not fully chge i want it to be same all time , current mirror works here i wont to burn the helicopter?are
Question by britich | last reply
Ok, this is the second time it happened, when I opened up instructables, I was logged into someone else's name. Today, I was Austinbwood when I came. If this is happening to other people, they could be changing personal information. I have no idea where the problem is, but it has happened twice.
Topic by Weissensteinburg | last reply
Hello, I apologize for my bad English, I'm from a country where English is not the official. I have a problem, I made a circuit to synchronize the lights to music with a TIP31. the problem is when I connect it to the amplifier is blown, I fixed it, but I do not understand why it burns, can you help me? Is it because TIP31 is powered by 12V? If you could help me find a solution?
Topic by mitza sb | last reply
This has NOTHING to do with instructables but i figured theres alot of smart people out there willing to share their wisdom with me. I cannot connect to the iTunes store but i can connect to the internet (CLICK!!) just like that. it says my network connection has timed out
Topic by computerfaker3 | last reply
I hooked up 12 3mm red leds in parallel and then powered them with 2x 1.5v rechargeable batteries, and it worked, until 2 blew 3 got damaged and they all started flickering. Why, and what should I do to fix it? Feel free to ask any questions. Thanks Big
Question by alexw2150 | last reply
I love Instructables but I am constantly having problems logging in. I reset my password and it shows me logged in but I can't download pdf files. It will just flip screens and keeps asking me to login again. I clean my computer's cookies and cache and sometimes this helps but it seems to me that Instructable has a problem because I don't have this problem with any other websites I use. Whenever I clean my computer, I then have to re-enter everything to all the other sites which is a real pain. This has been going on for a long time....at least a year. Will this ever be fixed? Any other suggestions? Thanks.
Topic by opusnz | last reply
When I tried to access KI today, (www.knexinnovation.net), I noticed 3 problems. Firstly, for the first 10 minutes, I got error 404 and mediawiki errors every time. Then, the layout had changed to the "VBulletin" style on silver stuff and everything was different. Thirdly, I couldn't log in. Does anyone know what's going on?
Topic by The Jamalam | last reply
Hey guys i just made this circuit ( pic provided ), The problem is when i clap the led that indicates the circuit is off turns off (power goes to the relay coil) but the circuit off indicator led turns back on after a few sec and the relay does turn on at all. (Yes the relay works) And another thing I observed is that when i take the coil wires off and attach them to an led instead of relay it works correctly and the led stays on till i clap again to turn the circuit off.
Question by SA-DIY | last reply
There is power but no sound output,there are relays in side that click on iv have a prob and there is power to about half the board just not out put stage and i know that there is a speaker protection that is probable not letting power through for some unknown reason\r\nsansui au-x410r rated at 180 w 240v does any1 have a surgestions on problem or how to get hold of a service manuel
Question by andybuda | last reply