STEP File Import

After reviewing my latest posting, I noticed that I was able to zoom and rotate the STEP files included with the graphics.  Dumb question - has the STEP file viewer always been included on Instructables or is this a relatively new feature?  Anyway, it's a nice feature for people that want a better understanding of the part. 

Topic by mtairymd 


Uploading Files?

When making my step-by-step "Homemade Hedbanz Game" Instructable, I tried uploading my Microsoft Word files the same way I uploaded my pictures. They would say they downloaded 100% but I could never find them in my uploaded gallery, nor in my Instructable (I checked the "add to this step" box). I can't figure out how to do it, and I am scared my contest entries won't win because of it (I entered it into the Craft Contest and the Toy Contest). Please help!!

Question by jnbyrd   |  last reply


pdf file

The PDF file on my instructables is not update by the steps i published. how can i replace the file to a new one?

Topic by yaeliv   |  last reply


"automatically add files to this step" checkbox present in non-ible context

When updating my profile picture here:   https://www.instructables.com/you/settings?modify=IMAGES  A checkbox labelled "automatically add files to this step" appears, even though my profile is not an instructable.

Topic by jrspence 


Create A Step Bookmark For A Hyperlink?

Can I create a bookmark pointing to a particular step in one Instructable, and hyperlink to it from another Instructable?  Scenario: Instructable "A" has a step whose image and info would also serve in another Instructable, "B". Can I link to "A" step while still remaining in "B". Kinda like the old "call" command used in dos batch files.  Thank you!

Topic by BeachsideHank   |  last reply


Trouble uploading files

Having difficulty uploading files.  I've selected the files and pressed the upload button.  The percentage uploaded increases to 100% but the files stay on the upload list with a status of 100%.  Files are not attached to the step nor do they appear under "your library".  I'm using Firefox 14.0.1.  I've also tried it on Chrome 20.0.1132.57.  Had this problem this morning (Pacific time) and this evening.  This morning I was on a different local network than this evening - so not a network problem.

Topic by talk2bruce   |  last reply


no select files button on firefox

I use a desk top computer with win7 and use mozilla firefox as my main browser, when trying to create a new step by step "ible" there is no select files button to add pics. I was able to complete the "ible" by opening instructables in IE. While writing this bug report I was able to use the "use old uploader" option because there is no select files button while using firefox

Topic by l8nite   |  last reply


how do you upload a file

How do i upload pictures to put them on my step by step instructable?

Topic by popizack   |  last reply


Problem displaying stl files

Hi, when I try to use the "View in 3D" button on the middle part of my Green Latern Instructable (https://www.instructables.com/id/Qi-Green-Lantern-Charger/ - step 3: "Middle.stl"). It shows a totally different part. The same happens with "bottom.stl", "top.stl". Britt

Topic by BrittLiv   |  last reply


3D Viewer

Instructables Team - I don't know when it was changed but the "View in 3D" upgrade works very well. I especially like the section analysis and exploded views.Makers - if you are like me and enjoy showing your work in CAD, please consider dropping STP/STEP files into your instructable.

Topic by mtairymd   |  last reply


Can Somebody Please Make A Step-By-Step Guide To Making A NES Game?

Just Need A Little More Detail Than www.bobrost.com/nes He Has A Pretty Decent Guide But I Just Don't Understand How The Registers And Codes Interact W/ The Chr Files. Im Used To Batch Coding So This Might Be Why Im Having Trouble.

Question by GusK   |  last reply


Download (Premium Upgrade) x Steps

Hi! I'm interested in Multiple Raspberry PI 3D Scanner project. I would like to know if there are more information, in the PDF file than  in steps described on the web, for example, PI board conections (schematics) or is the same information that is presented in the web. Regards Dario Araujo

Question by DarioAraujo   |  last reply


"Unextract" Converted Batch Files

Have you ever wondered how to do something in batch that someone has already done and wrapped it nicely in a little .exe file? Some people like to keep their batch programming secrets to themselves, and don't want to share, so then convert their batch file to .exe. But you can't discover their secrets if they have converted it to .exe, because all you will find is gibberish. Before I will tell you how to "unextract" an .exe, you must now how ".bat to .exe" programs work. What they basically do is "wrap" a batch file with an executable; think about a Christmas present. Pretend the gift inside is the secrets of the batch file, and the wrapping on the outside is like the executable, which prevents you from "seeing" the secrets inside. But this is no ordinary present, the wrapping on the outside can not be torn or opened, you must press a button in order to to "unwrap" it. But when it "unwraps", it shows you what it is, but hiding the secrets. If you couldn't fully understand that, here is what actually happens. Try to compare the two.Batch files in executable form cannot be viewed as the batch language. If you open it in notepad, you will get a whole bunch of symbols. In the philosophy above, pressing the "button" is the same as opening the file as an executable. It opens just like a batch file, but if you try to edit it, you won't be able to read it. What the executable does, is temporarily extracts the batch file within it, to a temp folder.Now to the "how to" part. Here is where that "temp" (temporary) folder is: %userprofile%\Local Settings\TempNow all you have to do is copy and paste that into a windows explorer address bar. You will now be in a temp folder where the batch file will be dumped. Now you have to run the .exe file. But now you do have to get your hands dirty (virtually!). Search in each folder till you find a batch file, most commonly called batchfile.bat. Simply right click, press edit, and your in!So that's how to "unextract" a converted batch file! (note: I didn't make it an instructible because, well, no one likes a one step instructable!)Good Luck!

Topic by Arbitror   |  last reply


where is the the step by step project for the woodbuilt propeller?? Answered

HELLO,I saw a project here at insructables that showed you step by step how the wooden prop was made with metal templates that I would imagine was in the downloadable pdf file which I could not access.Can anyone tell me how to get it.PLEASE REPLY.THANK YOU 

Question by edmundston   |  last reply


How can I generate a formatted HTML file with PHP?

I'm doing a major reconstruction of my website. I want it to be more dynamic and interactive (CMS), something like Instructables. I already started the login-logout cookie system, establish a MySQL database and found a user friendly text editor. I'm planning to buy a ".com" domain if I get the system to work. I'm not trying to compete with ibles or anything, but rather just want to make a site where I can post guides then display it on my homepage. Similar to the GUI of ibles.  My Site: ASCAS.tk Can you guys help me find a decent PHP code that would generate formatted html files, so that I would be able to post step-by-step guides similar to instructables... Don't worry about the database, and the text editor, I'll just figure it out.  As a sign of gratitude, I would like to gave away a patch or a 3 month Pro-membership to the person who gets the best answer :D  _____________________________________ //I found a code, but sadly I can't get it to work :(  error_reporting(E_ALL); require_once 'KvzHTML.php'; // These are the default options, so might // as well have initialized KvzHTML with an // empty first argument $H = new KvzHTML(array(   'xhtml' => true,   'track_toc' => false,   'link_toc' => true,   'indentation' => 4,   'newlines' => true,   'echo' => false,   'buffer' => false,   'xml' => false,   'tidy' => false, )); echo $H->html(   $H->head(       $H->title('My page')   ) .   $H->body(       $H->h1('Important website') .       $H->p('Welcome to our website.') .       $H->h2('Users') .       $H->p('Here\'s a list of current users:') .       $H->table(           $H->tr($H->th('id') . $H->th('name') . $H->th('age')) .           $H->tr($H->td('#1') . $H->td('Kevin van Zonneveld') . $H->td('26')) .           $H->tr($H->td('#2') . $H->td('Foo Bar') . $H->td('28'))       )   ) ); ?>

Question by ASCAS 


illustrator to large dgx file question? Answered

Hello. I'm in a bit of a hurry as there is a competition I want to enter by Friday but I just need to know before doing so if this is possible in theory. ( I only have to enter the image on Friday not the the object) My final aim is to have an intricate image laser cut into  metal sheet  (5' x 7'.) at a metal fabricator's. I have imported an A4 sized single colour tif. file into Illustrator and have converted it to a vector using Livetrace; it is now an ai. file. This as far as I have got  . But the question is ;  I plan to use one of the available convertors to change this ai. file to a dgx. file. Do I simply then take that to a fabricator and then that's it ? Have I missed out a hundred steps and complications ? Or is there a better way ? Or is it not possible to scale up  an image this way? It's obvious that I don't know what I'm doing so any advice will be appreciated. Thanks FOH

Question by FriendOfHumanity   |  last reply


please help with corrupt mp4 file?

Hi, I'v been making a frame laps video of a book binding instructable, all except the last segment are fine. during recording the last segment the recorder (frame laps pro app on Samsung s3mini) ran out of space on the memory card. Iv tried downloading various pieces of freeware and trials that claim to be capable of fixing such videos, none of them worked for me.  If anyone out there has got some working software that could recover what video is there, i would be most grateful. iv attached the video file to the question. if anybody could process it and upload it as a winning answer that would be awesome. Then i would be able to complete the you-tube edit ,write up some concise steps publish the instructable with a video of it all happening at the end. I'd like the instructable to be as complete as possible to make the blisters worth it. thank you for reading this , yours sincerely George.

Question by crazyg   |  last reply


How do I make a batch file have a chance to do the next step?

I want to create a batch that when opened, has a 1/6 chance to open a file, if not it has a 1/5 chance to open something else, same process until final 100% option. How would I do this in batch, and if I can't do it in batch, where could I do this? Thanks for the help in advance.

Question by Flammeus   |  last reply


whats my next step modded original xbox?

Modded origial xbox the xbox was modded well before i ever resived it with the help of some people from this site i have been abel to regain an FTP connection. To restore it to working order whats my next step id like it to run evox again can i do this throught the FTP server? the file below is the error codes im getting right wen i turn it on

Question by oogieboogie56   |  last reply


Several Easy Steps to Boost Your Computer's Speed

Some of you may have seen my instructable, Several Easy Steps to Boost Your Computer's Speed, and I have been getting some feedback. But I wanted to post it to forums, see if anyone can come up with some more ideas on how to boost a computer's speed. Let me know if you can think of anything! Feel free to comment here or on the Instructable.Thanks!Lukethebook333

Topic by lukethebook333   |  last reply


Calculator data into a PC

I have a Check and Correct Calculator with 120 steps, I need to upload the data stored on the memory of the calculator, I mean the 120 steps all together into a excel file, or to a text file. Any ideas on how to convert a calculator into a small pad?

Topic by lmarkez   |  last reply


how can I transfer files from an sdcard on arduino via bluetooth to a Android phone ?

I will be using a microsd card breakout board as well as a bluetooth module. What basic steps do i have to follow like file transfer protocols or anything else to transfer a pdf/image file from the card to an android phone?

Question by sparkall   |  last reply


Cannot install files over 100~ MB???

So a couple of months ago i downloaded saints row 3 *crack* from blackbox, i install but at 25% of installation it says "Decompression failed. Error -7". I thought is was a problem with the installer. Then i downloaded Grand Theft Auto IV (wonderful game i mite say), and it comes up with non stop "CRC Error. Needs orijinal CD" or something.  ---this is where i got suspicious. Then Battlefield 3. That is the moment i started to hate computers. Dying light, that was my limit. İ am dying to play a game with good graphics. Help me please!!! Comp. specs: Processor Information:     Vendor:  GenuineIntel     CPU Family:  0xf     CPU Model:  0x6     CPU Stepping:  0x2     CPU Type:  0x0     Speed:  3024 Mhz     2 logical processors     2 physical processors     HyperThreading:  Unsupported     FCMOV:  Supported     SSE2:  Supported     SSE3:  Supported     SSSE3:  Unsupported     SSE4a:  Unsupported     SSE41:  Unsupported     SSE42:  Unsupported     Network Information:     Network Speed:      Operating System Version:     Windows 7 (32 bit)     NTFS:  Supported     Crypto Provider Codes:  Supported 311 0x0 0x0 0x0     Video Card:     Driver:  ATI Radeon HD 4600 Series      DirectX Driver Name:  aticfx32.dll     Driver Version:  8.771.0.0     DirectX Driver Version:  8.17.10.1043     Driver Date: 25 Aug 2010     OpenGL Version: 3.3     Desktop Color Depth: 32 bits per pixel     Monitor Refresh Rate: 60 Hz     DirectX Card: ATI Radeon HD 4600 Series      VendorID:  0x1002     DeviceID:  0x9498     Number of Monitors:  1     Number of Logical Video Cards:  1     No SLI or Crossfire Detected     Primary Display Resolution:  1600 x 900     Desktop Resolution: 1600 x 900     Primary Display Size: 22.20" x 12.52"  (25.47" diag)                                             56.4cm x 31.8cm  (64.7cm diag)     Primary Bus Type Not Detected     Primary VRAM: 1024 MB     Supported MSAA Modes:  2x 4x 8x     Sound card:     Audio device: Hoparl?r (High Definition Audio     Memory:     RAM:  2047 Mb     Miscellaneous:     UI Language:  English     Microphone:  Not set     Media Type:  DVD     Total Hard Disk Space Available:  476929 Mb     Largest Free Hard Disk Block:  81429 Mb     OS Install Date: Tem 21 2014     Game Controller: None detected    İnstalled software:  Non'ya Damn Buisness

Topic by Doc Penguin   |  last reply



How to use Arduino UNO as ISP to burn bootloader AND upload program to ATMEGA328?

Hi, I am new with Arduinos. Well actually, I know nothing about it. My friend bought me an Arduino UNO because he knows I like building stuff. I have a project that I want to carry out, but I just do not know how to program an AVR! I searched online for hours, but I can't seem to find the exact step-by-step guide I need. Basically, I want a step-by-step guide showing how to burn a bootloader to a target AVR using an Arduino UNO, AND how to upload the program to the target AVR. (It would also be great if someone could explain to me how the hex file works... I already have all the code and the files I need for my project, and it's got a .c file, and a .hex file. I know that .c file has the C language program in it, and the hex file is the compiled program that gets put into the microcontroller, but I do not know what to do with them...) Any help is greatly appreciated! Thanks!

Question by ddolbi1   |  last reply


Unable to use photos in the library in multiple different steps

So I am working on an instructable where I have a few steps already in progress, and in a new step I wanted to use a photo from my library that I had already used in a previous step. I had done an in-image box w/ caption in the first step I used it in that appears when I add it to the new step. If I delete the comment in the picture in the new step, it also deletes the comment in the previous step the photo was used in. I'm not sure if this is unique to the way the photos are stored, in that the comment boxed are stored with the photo. I'd much rather be able to use photos twice in different steps when they have the same information in the photo but I'm zeroing in on a different aspect of the photo. Should I just upload two of the same photo with different file names to overcome this or is there a way to use a single photo in my library twice? I'm working on a 2009 Macbook Pro Model 5,3 with a 3.06 ghz processor, in the Chrome Web Browser version 26.0.1410.43. I don't have a current instructable draft where this can be reproduced unfortunately because I ended up just using a different photo to get the instructable published on time for a commitment to a forum. Although it behaves the same in using the old photo caption when I brought an old photo in the library into a new instructable (Helpful Preferences for LectureNotes on the Samsung Galaxy Note 10.1). I have attached a screenshot of an example image where it brought in the old comment to the new instructable. **Also is there a way to search the forum to find if this has been reported/asked before?? I'm very sorry if this is a repost as I couldn't search the forum itself.

Topic by milessthomas   |  last reply


iframe with instructables.com source

I'm trying to add a swf file in a step-by-step that was uploaded to instructables.com (https://www.instructables.com/id/Free-professional-wind-turbine-blade/step7/Spinning): src="https://www.instructables.com/files/orig/FGQ/1M2V/HH11S2TK/FGQ1M2VHH11S2TK.swf" scrolling="no" frameborder="no" height="637" width="529"> It's visible in preview but removed when saved. I understand for external domains but for the same domain? Is it a bug? Thanks

Topic by phmanzano   |  last reply


(Idea) Offline Instructables Editor/maker

So I have had this idea in my head for some time now, and I finally went and tried it out. I'm always mad when I can't work on a instructable because the computer doesn't have internet, so i decided to try and make a editor that would edit and make instructable offline. I figure that i would gets this idea out in the open before going further because it does need some help from everyone here. I already thought up a way to make a type of file format. I took a zip file, put all the instructable files into it, and then renamed it a .ible file so it stands out as a instructable file. i have attached the test .ible fine on the forum so you can take a look at it(just rename it .zip to view it for now). i have a main config fine called CONFIG.instructable which contains all the basic things that it would need to know about the instructable. it tells it the title of the instructable, where to find the text for the intro, the pics for the intro, and then how many steps. there are then config files for each step. the names are simple, step1.config. in that it tells it the name of the step, what the name of the body text file is, and then how many pics are in it and the file names of them the thing is, this file means nothing if we can work out some way to upload it to instructables in a way that it is recognized as a instructable and loaded correctly. I figure that before I go and try to make a program that will make these files, I should ask if this is even possible. So what do you thinl?

Topic by dsman195276   |  last reply


Can't publish my video neither add step-by-step pics

I'm trying to post a video and separately also a number of pics for a step-by-step instructable. The video was saved as a draft (tittle, text and YouTube video code) but the system is not publishing it, I read before that a thumbnail is needed but the box for thumbnails is not letting me attach anything. Also, If I try to post pictures, the window to do so, is letting me enter Tittle and Text, but the box "attached images and files" is inactive, I can't access it. I'm using the new uploader but tried the old one as well, none are working for me. I'm a newbie here, so probably I'm missing something, can anyone tell me what it is? Thanks!

Topic by mistudio   |  last reply


how do i network xp with a vista and acces xp files?can i have a step by step instructions.thanks a lot.?

I have to laptops,xp and vista.i dont have a router.and buying isnt my type.so im planning to use my wifi connection to network the two.and acces the files.i know how to "ad hoc" but only when the host is the vista.how do i share my xp's internet connection? thanks for the help.

Question by charlesestimate 


Restore lost external hard drive files and folder after format

The day before yesterday, my external hard drive was dropped to the ground for a sudden shock. When trying to access it again on the computer, the windows just gave me a not formatted error and disabled my access without formatting, so, without deeper consideration, I formatted this drive and finally found all the files and folders were gone. What a stupid operation. In order to access my files and folders of the past two years, I began to crazily search for related articles and questions to see whether there was a way for me to get them back with success. Follows some recommended steps and data recovery programs, like: Firstly, stop using this formatted drive till rescuing everything back. Secondly, attack drive to computer and use data recovery software to scan this drive and rescue original stuffs back as many as possible. Thirdly, save all restored stuffs on another different drives or storage device at last. Fortunately, after trying these steps, I got most of my needed drive files and folders back with success. If you are also experiencing such data loss problems, you also can get some clues with my found articles, like: http://en.wikipedia.org/wiki/Data_recovery http://freeware-fix.blogspot.com/2013/02/external-hard-disk-format-recovery.html Or http://www.ucfix.com/data-recovery/data-recovery-after-format-external-drive-hdd.html Hope my words also can help someone there!

Question by Nicolenon0   |  last reply


I have a movie I want to inset into an Instructable - how do I do it?

It is 1min 32 sec long, 122 MB size, and .mov file. Is it possible to get this down to 10MB? I want to insert it into a step-by-step Instructable.

Question by techhobbit   |  last reply


ive followed the steps to permanently change the wallpaper in windows 7 starter from page?

Https://www.instructables.com/id/Permanently-Changing-The-Background-In-Windows-7-S/step6/The-Hardest-Part-Replacing-Shell32dll/ ? Ive managed to do it all but no matter how hard i try? it will not let me move/paste the modified shell32.dll file back into the system32 folder. everytime it says you need to provide administrator permission. sometimes the bar comes up to show the progress of moving the file but when you look for it it is not there. please help. i don't know where to go to read replys so could u please email me, dj7even@virginmedia.com PLEASE THIS IS MY LAST RESORT. last time i tried this and restarted my com it never worked again, i had to restore the operating sys. i have done the same thing again, ive changed the current shell32.dll to shell32.dll1 so this will prevent my com from booting up when i next turn my notebook off. ive had it on all night and day to prevent this.

Question by dj7even   |  last reply


Link Error on download link gives xml FIle - Espresso Souffle

Hi Download pdf gives contents ox xml file Espresso Soufflé by MrSirLRD Vote! Featured Download  6 Steps   Share  Favorite  I Made it!  Collection Download PDF All Instructables are now available in PDF format for easy printing, sharing and offline viewing. PDF download times vary, so please be patient as it may take a few minutes to download depending on your connection speed. Click on the link below to download your PDF. If you are having trouble downloading the PDF, try right clicking your mouse and choosing 'Save Link As...' or Ctrl + click if you're using a Mac. Espresso-Soufflé-1.pdf

Topic by ChefJohn1955   |  last reply


How to see Filenames in "View by file type" - and how to "Search" Library

When I am putting in an Instructable, by default I see one row of pics at the bottom and they have the "Filename" listed under each. BUT it is not really the filename becaus it include the full path, and is cut off after a few chracters. So for example, if my first pic is: c:\Instructables\TubeLamp\Pic1.jpg" Under the pic all I see is: c:\Instructab - so how in the world can I view the filenames ?? Also - although I can do a search while in Library View, for some reason they removed that when you REALLY need it, which is when you are trying to find the right pic to add to a step in your Instructable. There simply is no Search button or Link.

Topic by PCdoc   |  last reply


Introducing: Design Challenges!

Design Challenges will be in addition to our other contests. Here is what makes them different than our traditional contests and challenges: You do not create step-by-step Instructables for these contests. Create 3D designs using Fusion360, Tinkercad, or any program that allows you to make .STL files. Design Challenges can only be entered from the contest page. We will usually provide start files to get you started (this will be dependent on the contest and its theme). Our first one is the BOSEbuild Design Challenge. If you have questions specific to the BOSEbuild Challenge, the Speaker Cube, or creating your own custom designs, you can post those questions here. If you have questions about Design Challenges and what they are going to be like, post them here! *If you want to upload more than 1 STL file, upload your main design file in the "Add Design File" section and upload any supporting renders of the design, additional .stl files, or other relevant images to the "Add Images" section.*

Topic by Penolopy Bulnick   |  last reply


PDF won't download

PDF won't download: No irrigation raised bed gardening system (Hugelkultur) (It goes through all the steps and the tab in Safari (iPad) says that  a PDF downloaded, but there's no file there.

Topic by hartpete   |  last reply


JPG Upload gets stuck

As I am working on a somewhat picture heavy instructable I running almost all the times I try to upload pictures into the following problem: I select the files/images I want to upload and add to the step I'm working on, hit the upload files button and wait for the magic to happen. Then it starts uploading. Then on a seemingly random file the upload stops and I have to cancel that file. The upload then continues until it stops again, sometimes on the next file, sometimes it uploads some other files in between. When I had to cancel the upload of the last picture once, all the images did cancel (at least they didn't show up in the library). Normally on a second or third try the images upload fine. There was also one that was corrupted but then I got a error message back and the upload of the other files worked fine. I am using Firefox 20.0 on Mac OS X 10.6.8 on a MacBook Pro

Topic by uersel   |  last reply


cannot print from the print button at the end of the first step of ANY instructable

When I try to print using the print button at the bottom of the first step of any instructable I get an error screen. I am using two different computers running Int Exp v 6 and 7 I think - if I use firefox the preview comes up with a bunch of gibberish text and characters. "The error from MS Explorer is Internet explorer cannot download print.html from www.instructables.com. Internet explorer was not able to open this internet site. The requested site is either unavailable or cannot be found. Please try agin later." Behind this is a box that says "File download print.html from www.instructables.com" but nothing ever happens. I am logged on as my userid cnc_gary. I'm not sure when this started, but in the past few weeks. Both computers are Intel duo-core running XP sp2 - prior to this I could always print the whole instructable. Is there something that I need to change or... Gary

Topic by cnc_gary   |  last reply


Can't upload images in new instructable?

I can't seem ot upload images for my new instructables. The uploader ( either one I tried both ) seems to proceed  normally however the image display says "image not found". Even more tedious if this is the first image the step is no longer accessible from the list of icons at the top. The only way i found to edit the step and remove the image was to re-order the steps and then click the edit button on the list. To reproduce: create an instructable with several steps and no images. Select one of the steps and upload an image either from a file on the local disk or from a URL. My results: The upload will proceed without error but the image will not be displayed and the step is no longer accessible from the list at the top.

Topic by egbertfitzwilly   |  last reply


100% uploaded picture is no seen

I found this problem during a step by step Instructables: https://www.instructables.com/id/Khandvi-a-snack-from-Gujarat/ I uploaded all pictures in one batch. When I got to step 1 of the Instructables, I found one of pictures was not in the library. I clicked on "upload" tab, it showed 100% uploaded but it didn't show up in the library or the instructables, nor the specific step. I refreshed browser. It didn't help.  I tried "select files", "upload" a few times, it didn't help. I logged out my account, logged in and tried the above tricks, still didn't work. What's problem? How to fix it? How to add that picture to the step?  

Topic by babybayrs   |  last reply


mp3 to midi

I have been looking very hard around the web and have not yet found a free (or a trial version) mp3 converter that can make it midi or (mid) type music file. Also some step by step instructions on how to do it would be nice. UPDATE I don't want to put it on my ipod I need it for my phone and it handles only midis.:( Thanks in advance:)

Topic by thejrb   |  last reply


MAX8622 step up chip any .sch out there other then flash camera like solar project ?

  Hi i got a MAX8622 step up chip and asking if any1 made a solar cell project and would like to share there eagle .sch and a converter to convert 300v into outlet out put  i wanna use ur guys and girls as a template if i did it right but i dont have the MAX8622 .lbr file this will really help my project going and u to will help a lot more then u think 

Question by GENERALCHAOS   |  last reply


How to copy/transfer files(songs,video,photo,dvd) from iPod to Mac/PC?

[b]The article includes two parts. 1. How to Transfer Files from iPod to Mac? 2. How to Copy Files from iPod to PC?[/b] [b]Part1. How to Transfer Files from iPod to Mac? [/b] Above all, you need the iMacsoft iPod to Mac Transfer. iMacsoft [url=http://www.ipodtomac.biz/]iPod to Mac[/url] Transfer, the excellent iPod and iPhone management tool is specially designed for Mac users. It can fast transfer, rip, copy and manage your music, videos, photos, podcasts and TV Shows between iPod/iPhone and Mac and add them to your local iTunes library. What can iMacsoft iPod to Mac Transfer Do... Rip, copy and manage iPod music, videos, photos, podcasts and TV Shows between iPod/iPhone and Mac. Transfer files from iPod to Mac, iPhone to Mac. Edit and delete iPod/iPhone playlists. Copy files among multiple iPods. Transfer iPod to iPod on Mac. Transfer iPod music, videos, photos to iPhone. [b]How iMacsoft iPod to Mac Transfer Working... [/b] [img]http://www.ipodtomac.biz/images/ipod-to-mac-localfolder.jpg[/img] Step 1. Run software and click the "Add Files to iPod" or "Add Folder to iPod" button. Step 2. Click "Open" button to import selected files to your iPod. Step 3. When following dialogbox appear, you have done that! [b]Part2. How to Copy Files from iPod to PC? [/b] If you are an iPod user, and you want to know : [b]* copy your iPod content such iPod songs, movies, playlist and photo onto more than one PC * copy songs, video, photo from iPod to pc of your friend to share your iPod. * sync your iPod with a new computer. * backup your iPod content to a newly bought computer. * Your iTunes crashed and how to use iPod on another computer. [/b] In fact, copying files from [url=http://www.ipod-to-pc.net/] iPod to PC [/url] is easy to do. All you need to do is make sure that the PCs in question have iTunes or a similar software program installed on them. As we know, Cucusoft iPod to PC Transfer can help you copy files including songs, video, movies, pictures etc from iPod to PC, just need few steps, you can copy files from iPod to PC, follow this guide, you can resolve your problem. [b]Guide: How to Copy Files from iPod to PC? [/b] [img]http://www.ipod-to-pc.net/images/ipod-to-pc-1.gif[/img] [b]Step1[/b]. Launch the program. Normally, the program will search the device automatically. [b]Step2[/b]. Choose the list and files you want to transfer , Click the Export button. [b]Step3[/b]. After you clicking the Export button, the following window will pop up, you can choose transferring to computer or iTunes directly. You can set the output folder at Advanced->Options before transferring... [b]Step4[/b]. When the transferring finished, the following window will pop up. It shows that how many files have been done. You can click the OK button to view the output files. OK, now you have copied files from iPod to PC. And, if you are also looking for the [url=http://www.bestdvdconverter.com/]best dvd converter[/url], here are the Best software. Have a good day!

Topic by xxbbyyss   |  last reply


How do I edit a SQL database? Answered

Hey, I have recently found a clone of the Fiverr Script micro-jobs thing for free and I have no idea of how to set it up. I have set up the installation it says and step 2 says I need to import a file called 'scriptsolution.sql' into my newly created database. I know what this means, but how do I do this? I have setup a MySQL database on http://www.freesqldatabse.com/ and I don't know how to edit it. Then, step 3 says I need to upload some specified files into my web server's public directory and I have no idea on how to do that or what that means. Step 4 says I need to CHMOD 777 the files and directories that it shows, I have no idea what that means. Lastly, step 5 says 'Setup a cron job on your server to run once every hour of every day.' and it says the commend format, I sort of know what this means but I don't know how to do this. That's all I have questions abou so PLEASE HELP!!! Thanks!

Question by knexpert1700   |  last reply


how to transfer music video to my sony ericson k530i?

I just wanted to know on how to because when I downloaded a mv to my phone it was unknown file please give me the concrete steps

Question by  


Upload image to contest

How do we upload our tinkercad design to your contest? We have followed the steps and and we get the message to add the picture and it's already there. What file type do we need to use? We are using stl

Question by karen.nelson.5686322   |  last reply


Home automation & Home door sequrity including one android apk file project available ???

Please help me for this project. how will be arduino program code , which pin are connect to apparatus to apparatus. please give me all description step by step this project implimentation. Project planning:-                   1.Home automation & Home door sequrity including one android apk file.                   2. 4 Relay:   1. Blue led light.                                 2. Red  led light.                                 3. White led light for bath room using PIR sensor.(this light switch on/off only using pir sensor,                                            because-wet hand electric shock on switch or, damged mobile display).                                 4. Fan using voltage regulator.                                  note:- light switch on/off & fan switch & voltage regulataor incease/decrease including appk file.                   3.Home squrity switch board on/off may be   a.display board on wall of house.                                                                b. display in android apk file.                   4.when open door with corect srquirty,then photo upload in memory card.if incorect password then a lout of sound.                   5.when fire in house ,alarm using gas sensor. Room temperature, huminity show in display. Apparatues:            A: Led light on/off by mobile app.                  1.ESP8266 Serial Wi-Fi Wireless Transceiver Module for IOT.                  2.Generic(unbranded )4-channel relay control board module with optocoupler, 4 way relay module for arduino                  3.Arduino Uno R3 ATmega328P ATMEGA16U2 Compatible with USB Cable.                     or,xcluma Atmel Atmega 2560 Mega2560-16Au (16 Mhz) R3 Board+Usb Cable For Arduino.                  4.Led light 3(Blue,Red,White for Bath room),Motor Fan.                  5.REES52 REES_2 Bread Board or Solderless Pieces Circuit Test Board Project Board.                  6.Jumper Wires Male to Male, male to female, female to female.                  7.Generic KG001 HC-SR501 PIR Sensor Pyroelectric Infrared Module 2pcs(for bath room & door open).                  8.Adraxx LM7805 7508 Positive Voltage Regulator IC, 5V 1A.                  9.Resister 1k ohm.                  10.REES52 MQ2 Arduino Compatible Gas Sensor, Methane, Butane, LPG, Smoke Sensor.           B: Home sequrity.                  1.Quantum QHM495LM 25MP Web Camera.                  2.SanDisk Ultra MicroSDHC 32GB UHS-I Class 10 Memory Card With Adapter.                  3.REES52 621033926893 Universial 16 Key Switch Keypad Keyboard Fit for Arduino by REES52.                  4.Silicon Technolabs 20x4 Line LCD Display With Blue backlight HD44780 for ALL Arduino,Rasp Pi,AVR,ARM,8051 (Blue). Software:      1. Arduino-1.8.5.                2. wampserver & notepad++ (for php web page).                3. Android Apk file.      please help me for this project. how will be arduino program code , which pin are connect to apparatus to apparatus. please give me all description step by step this project implimentation.  i will waiting for you.

Question by somnathpanjaproject2018   |  last reply


Animated GIFs only play if they're embedded in text

MacOS 10.12 Chrome 60.0.3112.113 (Official Build) (64-bit) If the GIF is embedded in the text of the step, it works fine. Examples: IOT Made Simple: Playing With the ESP32 on Arduino IDE (step 4 onward), Split Flap Display (intro and step 5) If the GIF is put in the image section of the step, though, it doesn't play and just looks like a still image. Examples: PIDDYBOT - DIY Arduino Balancing Robot (every step except 1), Making a Gif From Photos (intro and step 1) (Also, GIFs in Design Challenge entries' image sections seem to work fine. Example: Lab Centrifuge Fidget Spinner (second image)) I first tried opening the images in the lightbox, and also opening them in new tabs via the context menu—neither helped; the images were still static. I tried clearing the cache, because I found that suggested elsewhere for GIFs not playing in Chrome, and that did help, but only very slightly. Upon refreshing the page after clearing the cache (or upon shift-refreshing the page to bypass the cache), the GIF will play for less than a second and then reload and become a static image again. I also tried Incognito mode, with all extensions disabled, with exactly the same behavior (playing briefly only when loaded without the cache). I also downloaded one of the non-playing GIFs (from the image section of a step) and one of the working ones (embedded in the text) to my computer and opened them in Preview. The sidebar showed only one frame for the non-working one (and looked just as if I had opened a static JPEG image) and all of the frames for the working one. A screenshot of this is attached. This seems to me to indicate that the server is not sending the proper file (or is sending the proper file and then sending a bad file to replace it) when the image is in the image section. Steps to reproduce: I have no idea. AFAIK all I did was load the page and it was broken.

Topic by PointyOintment   |  last reply


Batch High-detail Text Pictures

Okay, I was messing around with batch files when I came across a way to make high detail text pictures! All you have to do is these steps: 1. Create your text picture as big on the the screen that you have to scroll up and down. 2.Create a shortcut to the file and then choose properties on the shortcut. 3.Click on Font and set the size to 4x6. 4.Then go to Layout and set the window height and width to 100 each. 5.Click apply, and then............. YOUR DONE!!!

Topic by krujh2   |  last reply