Search for X2 in Topics


Whats better, a Turion 64 X2 or a Athlon 64 X2?

I want to know because i have both of these, and my Turion 64 runs pretty hot, so if anyone can help me out here, it would be appreciated. they are both 1.9GHz dual cores, both 64 bit capable. What i want to know is, does the Athlon run cooler, and is there anything that puts it above the Turion?

Question by zack247  


Installing a new processor.

Hi! My name is Kerry. I have an HP Pavilion a1410n PC. Where can I get a free manual for my (Asus A8n-LA GeForce 6150 LE Socket 939 mATX motherboard ? I'm trying to replace my ( AMD Athlon 64 3800 ) processor with a ( AMD Athlon 64 x2 4800 ) processor, and need to know if there are any jumpers I need to change. Thanks for your help in this matter. Sincerely, KC2Z

Topic by kc2z    |  last reply


I need Help with overclocking!

I have an amd athlon 2 x2 245 processor which runs at 2.9 ghz.  My games and computer runs slow when i run too many processes but i would like to have more processes then i can currently run.  I have 8 gigs of ddr3 ram which is good. but my processor isnt the best. I do have a cpu meter and it hits 100% when i first boot up my games. with chrome and my gadgets running it stays from 15-35%.  So any help would be greatly appreciated.  Thanks,                                                                               Logan

Topic by loman1997    |  last reply


Will this motherboard support a dual core CPU? Answered

I'm helping my friend do some upgrades on his computer, it's a Compaq Presario SR2034NX desktop. I'm wondering if it will support a dual core processor or not. According to HP, it doesn't, but looking around on the internet, I've seen quite a few people have upgraded to dual cores. However, there's some minor differences with this particular motherboard. It seems that there are actually two different types of motherboards with the same model number from Asus (A8M2N-LA). On the HP site they have different HP model numbers (a more advanced board - the NodusM3-GL8E, and the one I have - the Naos-GL6; both with the same A8M2N-LA number for Asus) It appears that the NodusM3-GL8E supports all sorts of fun things like 8 GiB of DDR2 800 RAM and dual cores up the wazoo. However, the Naos-GL6 looks like a stripped down version of the NodusM3-GL8E (two less RAM sockets, etc.), so it might not support a dual core. I'd like to know before purchasing, since Newegg won't accept processor returns for a refund. Also, 800 Mhz RAM would be nice to have, HP says it only supports 667 Mhz RAM but other people have put 800 Mhz in with no issues. Does anyone know if my friend's mobo will support a dual core and 800 Mhz RAM?

Question by RelaxedSoup    |  last reply


Good motherboard, for just starting custom builds?

Hi, I am relatively new to building custom computers. However, I feel like I know enough to actually build one. The first problem I'm having though is finding a good motherboard. I won't be doing a whole lot of hard core gaming, but probably a little(Halo, Fallout 3/New Vegas, MW2, etc...). So I would say I'd need the following specs(minimum, more is usually better): 4GB DDR3 RAM PCI Slot(s) 3 SATA devices(2 HDDs, 1 Disk Drive) 500GB HDD(s) AMD AM3 Athlon II x2 445 VGA & DVI I think I've found a good mobo to fit this bill: GIGABYTE GA-785GMT-USB3 Can anyone vouch for it, or offer a better suggestion?

Topic by metrogdor22    |  last reply


HELP! PROP NEEDED: Hollywood tourist maps x2

Hello all, i have been asked for two Hollywood tourist maps for my show this year (i need by Feb 10th) would one of you wonderful Californians be able to send me two ( i am willing to pay for the maps AND the postage via paypal) Please PLEASE PLEASE PLEASE please please I would just use a normal map and just print something to stick on part of it... but ...well it just wouldn't look right Can anyone help me??

Topic by Biggsy    |  last reply


Need tiny items to fit in tube 3"x2"

Need tiny samples or items to fit into a 3 1/2"x2" tube for a mental health fundraising project: Beauty samples, grooming items, tiny tools, tiny toys/stickers, pencils/pens, craft items, jewelry: you are all probably more creative than I am, so any ideas (especially harebrained) are welcome. If you could tell me where to look or who to contact for samples or tiny items, I would appreciate it.   If you have any to get rid of, please send to Sue Clark, PO Box 851943, Richardson, TX  75085.   Thank you so much.

Topic by SueC1    |  last reply


Problem #3

3: Find xSolution: x = 5a2 + b2 = c2a=3b=4c=x32 + 42 = x29+16 = x225 = x2sqrt(25) = x5 = xx = 5:-)

Topic by zachninme    |  last reply


12 volt Charge controller (solar)?

Hi i am wondering how to go about building a solar charge regulator i need some help and passably schematics i have 2 broken charge controllers  the parts i have salvaged  11A20YR, LM324. IC x2 11YRD g4, CD40106BM. X2 IC IRF3205, MT 1D4H. X6 MOS-FET ALJ, D882, P63. X2 TRANSISTOR X16, GF1200, YELLOW THING X2 C1115, JC817,KENTC, X2 few other parts that are on the board

Question by Daniel Deacon    |  last reply


IVE DONE IT 1500 of each knex peice

Today i bought the following peice 5946584442 x2 6053440294 x2 5984772116 6053048799 x2 and i have finally reached my 1500 of each peice goal. thats right i have 1500 of each knex peice.. the only problem is i cant get 1500 of those little Y peices so i geuss this is false celebration XD but its still pretty awsome

Topic by iKill    |  last reply


can i use 1 speed controller (24v 350w) for x2 24v 350w motors????its for a electric cart?

Im looking to build a electric cart with two 24v 350w motors but im wondering if i can use just one speed controller for it, the speed controller is 24v 350w thanks  james

Question by jbutcher05    |  last reply


I make knex boats, but all of them are paddle boats.I want to make a Propeller boat but cant make a working one. HELP!? Answered

Please can someone help me make a propeller for my boats! I, ideally, want a just prop system, but dont mind a paddle (padd) and prop system. The motors used have to be one of the following: A grey, large, two direction two speed (4x AA), x2 max A blue two direction (2xAA) x2 max A Spring motor (No Batteries) x2 max. I also have a gearbox (90 degree Direction change, not speed change). PLEASE HELP!! I can use all of these motors together if neccisary. Thanks!!

Question by hedzup456    |  last reply


can i use 1 speed controller (24v 350w) for x2 24v 350w motors????its for a electric cart?

Im looking to build a electric cart with two 24v 350w motors but im wondering if i can use just one speed controller for it, the speed controller is 24v 350w thanks james 

Topic by jbutcher05    |  last reply


Making a mini fridge. How many peltier units do i need?

I want to make a mini fridge rather than spend the $80-100 for one. I wanna make it 3'x2'x2'. How many peltier units would i need and do i need heatsinks for both sides (hot and cold)? Also do i need a converter to change the 120v down to something the peltier units can handle?

Question by sj898    |  last reply



should I build a replica of the spiderball track from metroid prime?

If I do I will make it 2'x10''x2". how far should the spacing be inbetween the glowing lines?

Question by nerd7473    |  last reply


Destiny hero yugioh

Hey folks this is my first Instructable, I would like to show you my Yugioh deck obviously my favorite cards are the Destiny Hero archetype. i love to build all sorts of decks for people but I'm not to much of a fan for yugioh Zexal, so  you probably will not see to many zexal cards in my decks. If you need help or tips on how to build a competitive deck  post a comment    I will be adding more decks later ps put what ever fusions you want in this deck Monsters D hero diamond dude D hero doom lord D hero dread master x2 D hero captain tenacious D hero blade master D hero dogma D hero dread servant x2 D hero Plasma (optional) E hero burstinatrix E hero avian E hero bubble man E hero clayman E hero blade edge E hero neos (optional) Hero kid x3 Blue-eyes white dragon SPELLS monster reborn monster reincarnation pot of duality x3 pot of avarice double summon clock tower prison x2 the warrior returning alive scapegoat swords or revealing light grave keepers servant x3(optional) MST (mystical space typhoon) United we stand TRAPS D time D signal A HERO Emerges x3 Call of the haunted x2

Topic by Destiny Hero105    |  last reply


Paint problem (winxp) Case image too big!!

Err..... art,tech or games, which one, oh its to do with art, lets go with art.At the time of writing, i could literaly destory paint (WinXP Prog), i spent 5 hours on making a custom wii case (well, paper selotaped onto wii), carefully measuring and converting values, and then it has the descensy to go and make the image bigger than it acctully need to be?!!! i spent ages just converting the damn CM measurements to pixels. please, someone shed light on to what happend.If you want to know what the pics and measurements are, there here!Measurements (CM)Wii Right Side:H:15.6w:21.7Backside ([==]<) H:13.9Backside W:19.6Backside Corner:2.5wii Left Side W:20.7H:Same as RSBack Side (>[==]) W:19Backside H: Same as RSCorner: Same as RSWii FacePlate:W:4.45 (From Side to Side)W:3.6 (From Corner edge (\|) to side)H:15.7Power Btn:Height:0.5Width:1.5X1:1.5 X2:2Y1:0.6 y2:2Reset Btn:Height: 0.4Width: 1.5X1:2.9 X2:3.4y1:0.6 y2:2SD CoverHeight:6.2Width:1.5x1:4.8 x2:11y1:0.6 y2:2Eject Btn:Height: 0.5Width: 1.5x1:13.7 x2:14.3y1:0.6 y2:2Disc Slot:Height:13.1width:0.9x1:1.3 x2:14.4y1:2.9 y2:3.8x:1.1 Disc-S to bottomimages % Design:http://www.megaupload.com/?d=AZBSV45X

Topic by ultimatesx9    |  last reply


Does anybody know where i can buy pyros lighter (from X2) or the decal?

Im looking for the zippo pyro used in the movie x-men 2 with the shark design on it . i really want to purchase one so thanks

Question by x3lm3rx    |  last reply


Given the derivative of a function, how would you find the original function? Answered

I am trying to teach myself calculus, so I am asking this question. For example, given that the derivative of a function is 2x, you could use the d/dx [x^n] = (n)(x(n-1)) to guess that the original function was x2, but what would you do if you were told that x2 itself was the derivative of another function? Please help me. Note that I am NOT someone asking for homework help, my homework from school is not calculus.

Question by Xellers    |  last reply


I need stepby step plans to build a 2'x2' thermo vacuum box can anyone help?

I also need to know how to build heating element for this size box and where to purchase the plastic. Thanks

Question    |  last reply


Bulding up a new PC, which one would you think be the best? Answered

Intel ·ASUS P7P55D - Intel P55 Chipset  - LGA 1156  - DDR3 (2133MHZ OC), 2x PCI Express 2.0 x16 (CrossFire Support) - Special Features - TurboV EVO OC Processor (2nd Micro Processor onboard) 12+2 Xtreme Phase Power, T Probe (Active cooling Microchip), Asus EPU · Intel Core i5 750 Lynnfield Processor - 2.66GHz Quad Core, 45nm, LGA 1156, 8MB L3, 2.5GT/s DMI Interface ·Patriot 2048MB DDR3 1333MHZ MEM x2 ·9800GT 1GB FORSA GRAPHICS CARD or AMD ·Jetway 770 Socket AM2+/AM3,AMD™ 770 Chipset and AMD™ S700 Chipset ,Supports AMD Socket AM3/AM2+/AM2:AMD Phenom series processors, Athlon 64 X2 / Athlon 64 FX / Athlon 64 / Sempron processors,HT 3.0,Dual Channel DDR2/DDR3 memory technology ·AMD Phenom™ x4  Quad Core (9650) 2.3GHz Processor ·Patriot 2048MB DDR3 1333MHZ MEM x2 ·9800GT 1GB FORSA GRAPHICS CARD

Question by Ortaega    |  last reply


A math challenge...

Ok, so there's this coding language called FCML- a simple language built for a scripting engine in a game (Fantastic Contraption). I'm wanting to write a script that implements the graph of an equation in the form of axn+b to that gaming language. To clarify, this is to create a "level", or a series of bricks, and fitting them along the line of a user-specified equation. The coding language is very simple:StaticRect (x1, y1), (x2, y2), zWhere x1 and y1 are coordinates on a Cartesian coordinate plane, x2 and y2 are lengths and widths of the rectangle, respectively, and z is the rotation of the brick. The brick is positioned with respect to it's center; i.e. it's center is positioned with x1 and y1. It's mathematically possible; it's just very confusing for a 7th grader. With a little calculus, trigonometry, and algebra I've come up with these formulas, and would just like to see what others come up with before implementing them.Input: y=axn90-tan-1(1/naxn-1) for z10 for y2root((axn-a(x-.5)n) + .25) for x2axn+.5(axn-a(x-.5)n) for y1x - .25 for x1I'm aiming for an accuracy of 1/2.

Topic by Padlock    |  last reply


Can someone help me to make a VU meter with (15(Row)x12(column)) x2 LED's ?? Answered

I want to construct a VU meter ...which  can be plugged into a MP3 player or a pc...and then  get the sound output from the VU meter..I made holes onto 2 bamboos where I will be placing the LED's 180 on each bamboo...There is an image also..But I would like to know that how can I make it.and which components I would require to make it....A detailed working would be really appreciated.. Thanks

Question by rahulstanley    |  last reply


I have a PCB BOARD set up for 150x 5mm IR LED's would Fifty 1/2w 56 ohm resister work?

Infrared spotlight project. I have a PCB BOARD set up for 150x 5mm IR LED 1.5-1.6 forward voltage. Forward current is 60 mA 150 LED’s are divided into 50 groups (3 LEDs each + 1 resistor) What ohm resistors are needed for the 50 groups of three LEDs each? I was thinking of using x2 18350 Ultrafire 3.7v x2= 7.4 volts. Suggestions on more or less voltage using increments of 3.7. Infrared spotlight project. I have a PCB BOARD set up for 150x 5mm IR LED 1.5-1.6 forward voltage. Forward current is 60 mA 150 LED’s are divided into 50 groups (3 LEDs each + 1 resistor) What ohm resistors are needed for the 50 groups of three LEDs each? I was thinking of using x2 18350 Ultrafire 3.7v x2= 7.4 volts. Using the online resistor led calculator. For 150 LEDs grouped 3 LEDs + 1 resister The answer given was x50 1/2w 56ohm resister needed. Being a broke novice I don't want to order and wait for fifty wrong resisters. Do you think this is a safe bet? To better understand my confusion please refer to item #251216249922 on eBay or look up pcb board for 150 x led 3mm or 5mm. The third photo completed tells a lot. Thanks again for the help!

Topic by Magnum50ae    |  last reply


I have a project idea: LCD sunglasses. I'd need some really small screens, however. Can you buy 1&quot;x2&quot; LCD screens?

I am going to attempt to build LCD sunglasses. I know how an LCD works, with an internal polarizer and the liquid crystal itself providing polarizing in a different direction. I am planning to use an LCD screen for a sunglass lens, but I'll need both small and oddly shaped LCDs. Is it possible to cut LCDs down to size or shape? If worst comes to worst, I will just have square lenses, but the thing which would fit best would be 1"x2". Can you buy these?

Question    |  last reply


Arduino Error expected ',' before '*' token? Answered

My Sketch I used Micro soft to generate the Polynomial  below.       y = 28.089x5 - 158.77x4 + 410.33x3 - 426.65x2 + 532.31x - 320.03R² = 1 float I04 = A0; int readValue1; float x5 = 22.52; float x4 = 95.802; float x3 = 237.57; float x2 = 126.81; float x1 = 561.04; float x0 = 448.98; float I04_F = 0; int vdc1; int I04_C = 0; void setup() {   Serial.begin(9600);   pinMode(I04, INPUT); } void loop() {   { readValue1 = analogRead(I04);     vdc1 = (5. / 1023.) * readValue1;     I04_C = [x5 * vdc1 ^ 5] - [x4 * vdc1 ^ 4] + [x3 * vdc1 ^ 3] - [x2 * vdc1 ^ 2] + [x1 * vdc1] - x0;     I04_C = constrain(I04_C, 20, 1000);     Serial.println(" I04_C = " + (String) I04_C);     delay (25);   } After compiling i get the following, Arduino Error    expected ',' before '*' token? Thanks Steve,

Question by StevenM267    |  last reply


USB Device Recharger

For efficiency has anyone tried the ZipLinq X2 model universal charger coupled to the Gomadic retractable cord with tip #37 for the Creative Zen V+. It seemed like a nice setup except it doesn't work.I also tried to use it for my Motorola Pebl and Razr with tip #28. No Joy. Wish someone would try and comment. GomadicZiplinq

Topic by BatRat    |  last reply


Battlefield 2 Problems? Answered

I'm having problems with battlefield 2, whenever I try and Play the game the screen goes black like its going to load, but then it goes back to the desktop. The version of the game is 1.5 AMD Phenom II x2 black edition processor, 3.1ghz nvidia GeForce 9800 GT 2gb DDR2 RAM mother board: asrock A780GMH/128M running Windows 7 Ultimate thanks

Question by T_T_    |  last reply


simple plans needed for a basic enclosed outdoor storage cabinet to share? need to make one fast ?

i can just wing it but will probably waste some wood by not planning it properly.  anyone got a set of plans for a basic paintable outdoor storage shed ( 2'x2'x5or6') ?  i need each shelf to hold 100lbs min. and 100%waterproof. can you help ? thanks !

Question by redwoodschef    |  last reply


how to factor a 4 degree polynomial?

How would I solve an equation similar to this purely by using algebra, no graphing as I want exact answers. For those people that don't like helping people on homework, I have to say this. I have like 20 problems like this, and I just want to get down how to solve them.x3 -3x>x2 + 7btw the class is pre-calc

Topic by guyfrom7up    |  last reply


can i use s1g4 processor on socket s1g3 ? Answered

I want to upgrade my laptop to champlain processor  my laptop is ACER Aspire 4540 : AMD Turion II x2 M520 ATI Radeon HD 4200 RAM DDR2 3gb

Question by Rendydevara    |  last reply


electric current of Motherboard (approximately)? only motherboard, processor and ram, no HDD, PCI, PCIe, DVD Drive?

I made a plan to make the battery for the motherboard, I want to know, how much current is needed. I asks this because I have broken mutimeter. and i have a plan to buy MSI 785GM-P45, amd athlon II x2 245

Question by Rendydevara    |  last reply


I want to build a push cart with x4 bicycle tyres?

I want to use bicycle wheels with the turn function of two at the back where I would steer and push from. I have no idea how to make this,just have the idea in my head, that it would be just what I need,I picture x2 tyres with the forks at the back with a wide kinda T-handle to steer left or right,other x2 fixed at the front.My main thing I guess would be the axle strength or protection from rugged bush terrain and how or what frame would suit best for what I want.But if I have plans or a tutorial video I'm sure I can.Must be light weight but able to carry 150kg , not wider than 900mm including tyres,if longer than 2metres then is it possble to have it come apart in two pieces?I don't have welding options,where I should weld I plan on drill and nuts+bolts . I've searched all over the internet for 3 days or 5 hrs a day with no luck what so ever. Hope someone can help!

Question by jess.zimmermann.9    |  last reply


3d Scanning Howto? best recommended? DYI vs purchased

Hey gang! So, I am in need of some help.   The end goal is to make some  1x1x1 or 2x2x2 inch figurines of my kids. (  Think DnD wizard with my sons face") as the end goal. Right now, I am wondering if anyone has any success with the Scanning side of things.  Can you recommend a DIY 3d scanning solution? On Friday, I took my Nikon DSRL and put a 2"x2"x2" clay figuring on a rotating table and took some pictures, and uploaded it to 123d Catch.  I took about 30 pictures and uploaded them.  some where ignored because of lighting maybe. I have search for 3d scanning on instructables, and found quite a few, but it would be too costly to try them all, so I though I would ask in public chat if anyone has good success.   (I know I can spend 1500 on the maker scanner, but thats crazy expensive for a toy) So putting this out there for anyone to help me out

Topic by menglor    |  last reply


Ganache - It isnt setting in the fridge? Answered

Well I have tryed this recipe https://www.instructables.com/id/E6GFU1NWXTEVYDYEQA/ and have done everything. Though, i used single cream instead of whipped cream, and i didnt put sugar syrup. I didnt think that these would make a difference (i didnt have these), so, do they? I have put it in the fridge for 15 mins, taken it out, stirred, and put back in x2 and it still isnt thickening. Does anyone know why?

Question by Carostar680    |  last reply


Cheap equpiment?

Are there any decent, really inexpensive equipment of: metal/cnc lathes cnc mills by cheap i mean under 300 dollars each, even cheaper is better! they don't have to be really expensive, actually for the mill, I'm only looking for something that can mill like 4"x4"x2" or something like that. And for the lathe I'm looking for something that can mill like 3 inches in diameter and a foot long. Thanks!

Topic by guyfrom7up    |  last reply


Post the Nintendo game systems you have owned!

What Ninty game systems have you owned?I have owned:Gameboy Colour x2 *Gameboy Advance *Gameboy Advance SPNintendo DSNintendo DS Lite *and a Wii. *I'm pretty new to Nintendo consoles, but I've been through many handhelds. * means I still own.

Topic by Noodle93    |  last reply


How do you make a very basic and small vu meter?

I am trying to make a vu meter that is small enough for the dimensions to be 4"x2"x4". So I want everything to be no taller than 2inch from the circuit board. Is this possible? (Excluding the LED's) I am just looking for some insight and help on a side project. That is all =) (I have not made anything on a circuit board before, so I am trying to learn)

Question by alecjpate    |  last reply


Best way to wire &quot;PlasmaGlow&quot; &quot;El Wire&quot; together to a single ON/Off Toggle switch?

Application is for car interior. Plasma Glow sells their EL Wire in 5ft and 10 ft lengths. I currently have this set-up in my car: 10 ft dash board x2 10ft rear doors (a 10ft per door panel) x2 10ft front doors (a 10ft per door panel) X2 5 ft front doors (a 5ft per door panel) as you can see, that's 7 separate lengths of EL Wire! I WANT them all to be wired up to a single toggle switch. Both the 5 and 10 foot wires have a car plug (cigarette lighter type) and then have a "music box" that allows you to select the wire to be either solid on, or to pulse with music........... I DID splice 3 wires together by cutting between the plug and the box, but something burned out, or shorted so Im asking for all you electrical wizards to help me out. The included pictures show the plug and music box.... I want THE SIMPLEST way to wire these all up to a car's 12V DC battery. I have a 6 fuse holder, and could possibly use this??? I included the pictures of the music box open in case maybe someone can figure out why the EL Wire wont light up without it, or why it shorts out (whats the weak link?) and maybe can I wire all 7 wires up to one box? Once again, looking for the best possible solution.... im no wise guy and have absolutely no clue, so I hope u guys can help..... **Im using a RS illuminated toggle switch and have a voltmeter.... how do I test the resistance/ latency of ALL the wires hooked up to know the switch can handle them without actually messing anything up? Anyway.... thanks for your help..... im the mean time I will be installing a new polished chrome billet grille in my car when it arrives! Peace

Question by killarowa    |  last reply


Insualtion of an existing tin roof?

Hi, I have an existing summer room with a single skin, 4" corrogated tin roof. It is attached to the roof of the home and I do not wish to rip it apart. I was thinking to install a none bearing set of 4"x2" timbers, a half in from the existin roof, then insulating with 1" x 4'x8' sheets of styrafoam sheets, then a vapour barrier nder this. My main concern is the condensation produced on the inside of the tin roof, when it warms up. If I insualet the way I,m intending to,will this stop this condensation or do i need to do more to prevent it.

Question by grandpa2011    |  last reply


I need a computer controlled milling machine built

I need a computer controlled milling machine that will be about 2'x2' frame and would be portable and able to be attached to a piece of metal sheet and capable of cutting plastic material. What I need it to do is duplicate a profile that a metal sheet has to plastic. To be able to attach this to a panel take a tracer that can copy the profile. I would like to ether partner up with someone or I would gladly pay for you to produce this machine. Please contact me at DMARR35@AOL.COM for more info

Topic by dmarr35    |  last reply


I need a computer controlled milling machine built for patent

I need a computer controlled milling machine that will be about 2'x2' frame and would be portable and able to be attached to a piece of metal sheet and capable of cutting plastic material. What I need it to do is duplicate a profile that a metal sheet has to plastic. To be able to attach this to a panel take a tracer that can copy the profile. I would like to ether partner up with someone or I would gladly pay for you to produce this machine. Please contact me at DMARR35@AOL.COM for more info

Topic by dmarr35    |  last reply


50W amp 60W speakers? Answered

Ive got a 50w dual output Bluetooth only amp, I've also got Two 60w speakers would putting the max volume into the speakers damage them if played for a while. The speakers are 4" and slightly distort at max , could be from slight under power , the amp is rated at 8v to 24v and I am using a 19 v 3.16 amp laptop power supply Speakers 8ohm 60w  Amp dual output Bluetooth only 50w x2 Amp power 8v to 24v

Question by bonze77    |  last reply


Li-ion battery charging question

I'm new here so hi first. Now to the question I've been making a portable wii lately and I've gone quite far, but I'm stuck at the power. So I've got two 20000mAh mobile batteries (10000mAh 4.2V x2 in parallel for one mobile pack) i was planning to connect the batteries in series to get the required 12v+ power to get the Wii running . Since this is a mobile battery it has a charging circuit for the battery in parallel . I was thinking how to charge the batteries in balance (in series) . It's quite confusing ,any help will be appreciated!( There is very little information of the batteries inside the pack, it only says [10000mAh Max 4.2V])

Question by WanjiangW    |  last reply


why does my computer (a gateway NV52) keep shutting down at random times? Answered

It seems to only shutdown when i play games that require a lot of power like borderlands or SC2. It seems like it is from either an overworked GPU or it using too much memory. its got an AMD athelon x2 64 bit processor, an ATI radeon intigrated graphics card, and is running Windows Vista... and please no linux users telling me its because im running windows... i would rather be running ubuntu but i need more hard drive space. this is really annoying and any help that could be given would be appreciated. Thanks!  

Question by Thor007    |  last reply


home made PC chase

I made a mini pC the dimensions is: 39 cm W/32 cm/17,5 cm High video: http://www.youtube.com/watch?v=DOEhSknZNq0&feature;=youtu.be my system is: ASUS M4A88T-M LE AMD PHENOM II X4  3 . 4 GHZ Black Edition 2 GB DDR 3  1333 Mhz  KINGSTON   x2  modül 1 TB 32MB Cache SAMSUNG  HDD  7200 Rpm XILENCE XP 500 120 mm Fan PSU 500 Watt DVR-S19 LBK Pioneer  double layer label flash SATA DVD + 2 adet XILENCE with LED 8 cm fan

Topic by trouble01    |  last reply


how to repair my laptop without buy a new motherboard?

I have made a pcie mini card to pcie x1, i plugged PCI (NOT PCIe) an my laptop could turned on but no display. and i was try to connect to external monitor, it doesn't show anything. my laptop is acer aspire 4540 amd turion II x2 m520,  Motherboard LA-5521P.

Question by Rendydevara    |  last reply


How much could I sell these various computer parts for?

Here are some parts I would like to sell on eBay: 2 AMD Athalon 64 X2 Processors 2 1GB DDR2 RAM Chips 1 Intel Mobile Pentium III Processor 1 Cartridge Type Intel Pentium III Processor 12 Various Old Working RAM Could you guys give me a good selling price for one of each item? The last item you can just give me a price for all 12. Thanks! -Shadow Ops P.S.      If you are interested in any of these items, PM me and I'll give you a link to eBay, once I've posted it.

Question by Arbitror    |  last reply


How can I use the parts from a broken Nintendo DS to upgrade my DS?

My friend gave me his broken DS, and since I didn't have any other way of taking it apart, I ripped it apart by the hinges. So now I want to know how I can do these things to my DS to make it better: Add a second battery socket to increase battery life x2 Add new speakers for double sound Add one screen to each side of the Touch Screen Put more buttons to enhance gameplay Add more LEDs for more signals Merge the two DS outer shells together to make a multi-colored DS Anything is appreciated. Thanks.

Question by crabsintrees    |  last reply