Can i wire a usb to a regular xbox controller and use it on the 360
Topic by M1TCH3LL | last reply
Greetings, this is one of the first forums that i will post. I have become egrossed in forza 3 and am wondering if a way exists to change digital controlls to analog to get better realism from the game. I am probably nuking this but i would have fun with a hand brake(A button) and clutch(L BUMPER) that were moderatable like the gas and brake. If another topic like this exists please direct me to it so i will stop wasting webspace. so far i have not found anything. thanks for your ideas and input.
Topic by seabee890 | last reply
Hey well i wanted to know if anyone wanted to add me on xbox 360. My gamertag is sgt Mc MUFFIN55 and i mostly play MW2, gta4 Ballad of Gay Tony/Lost and Damned, Need For Speed Shift, well thats pretty much it. So send me a mesage of your gamertag and i will be happy to add you, and Also PLEASE SUBSCRIBE Thanks for your time:)
Topic by LEGO SN1P3R[-_-]! | last reply
SO im getting a new slim 360 soon and i want to mod my current one. Is there any way to J-tag it since it has the 12xxxx series dash (something like that). I really dont want to fork out all that cash for a mod chip for RGH. Is there any way I can use traditional methods of wiring components to J-tag my box? Thanks, Bud
Question by budhaztm | last reply
I have an old controller lying around that I could use for my Xbox. I'm wondering if there is any way that I can mod it with a USB wire and some way to use it for my Xbox 360. Thanks in advance!
Topic by Average | last reply
Is there a Gamecube to Xbox 360 controller adapter? I want to use my Gamecube Steering Wheel on my Xbox 360.
Question by cibertech | last reply
Is it possible to make a 360 controller and create a vision controlled (right) c-stick that I can use to aim at something simply by looking at it on the screen? Is this similar to what paralytics use to communicate? Is there any way that I could use that technolgy to OWN my cousin at Halo?
Topic by MattGyver92 | last reply
I want to make an xbox 360 modded controller. What is the easiest way. Also I don't want to drill a hole to add a button so can anyone teach me how to do a sleeper mod. Like a mod for my controller where i just press the sync button to change modes. Also I do not want to buy anything for my controller to help with the mod(e.g. Intensifire) Just post your thoughts or answers.
Topic by north33
I have 2 Xbox 360 controllers with the left analog stick's dead zone sticking. That is to say that if the joystick is nugged slightly and put down, it constantly registers a small movement in the direction it was nugged until you re-center it. I've tried taking it apart and cleaning it, but it seems the spring inside the analog stick unit is worn out. I've searched google, and the only broken controller hits I got was for the stick breaking off completely from the analog unit. Any insight as to how i could fix this problem, or am I better off trying to make 1 good controller out of 2 bad ones by taking the right analog unit off one and soldering it on the left analog port on the other?
Topic by Scurge
I know i would need a regulator. Also, if this is possible please provide me with a list of other parts. THANKS!
Question by conrad2468 | last reply
I have wireless xbox 360 controller, and using the removable AA battery pack. ( not the rechargeable closed solid battery pack ) after leaving the AA batteries in for a long time, the acid leaked out and actually melted the GROUND wire that is soldered to the PCB of the controller. i tried soldering a new wire on, but i'm guessing the point where the wire goes no longer is suitable as the controller still wont turn on. is there another place i can run the - (negative) part of the AA batteries on the PCB as im confident the normal place the ground wire goes to is screwed..... i was thinking can i connect it to the place the rechargeable battery pack connects to as it seems that it doesnt touch the same connectors as the AA battery pack. as the rechargeable pack has those small copper flat pins on the back of it.. which one is ground, can i use that connection? any help would be appreciated. photos of the place i can make my new ground connection would really help.... you can email me at firstname.lastname@example.org if you like, as i may not be able to check this site very often due to work. thanks for ur help all! Tris10
Question by Tris10 | last reply
Hey all, today I went out and bought an XBox 360 chatpad, to link up to my PC xbox 360 controller. I have all the latest drivers, yet still I have had no luck of getting the chatpad working :( I googled and found I'm not the only one. There is a program written in XNA that installs on PC and Xbox and works like that, but I don't have an Xbox :( Does anyone have a clue on how to get it working? Thanks in advance, SP534
Topic by SP534 | last reply
So I got an xbox 360 elite for Christmas. I set up my xbox live account and already have 75 gamerscore lol. My xbox 360 gamertag is "InvariantMedal". I'm not a serious player, but I am decent at games when I master their controls. I'll post pictures of my xbox setup in my den later on. Maybe tomorrow. What's your setup look like? *EDIT- 3/18/10* Don't expect to see me on live for a while. Some asshole broke into my house and stole my 360 and other game consoles. I did manage to get 2615 gamerscore before my 360 got stolen.
Topic by DJ Radio | last reply
Question by MackenzieD156 | last reply
Xbox 360 controller battery uses Hi everyone, here's a fairly easy challenge, I hope. I was hoping on using my rechargeable xbox 360 'play and charge' controller battery for more uses than for gaming. so to be able to unhook it from my controller and clip it on to my bike and be able to turn on a light with or with out a switch and with out any modification to the battery itself. Any ideas? hope this ones easy and could have many uses for it.
Topic by ANISHNAABE
Question by DJchrisy $chris$ | last reply
Ok i modded my controller turn on my controller put in cod 4 picked a gun started a match and my gun just started shooting randomly and when i push the momentary button in it stops shooting then when i let off it starts again did i get the wrong kinda momentary button ????
Topic by mpetri07 | last reply
My only question is how am I gonna send the buttons' status through the USB interface. For example, by characters where each bit is a button status, or something like that.
Question by jeajjr | last reply
Question by banlui | last reply
Question by Avadhut.Deshmukh | last reply
Some PC games I have support use of a controller, so I was wondering if you could hack a 360 controller to work with PC games.
Question by DJ Radio | last reply
I got a red ringed Xbox 360. It is green in the center for about 30 seconds then it gives a 3 part rrod. I can not turn it off either. I have replaced the heat paste. Then I unpluged and repluged the fans. Another thing is that when I hold in resart and eject I make it blink a full circle even faster than before. I have to start it up with the eject button. don't know how to fix it, but i can solder. Can anyone help ?
Question by jbaker22 | last reply
Ok see im trying to bridge a connection between my laptop and my xbox 36o to play on live, and when i bridge them , it says, " To create a network bridge, you must select at least 2 lan or high speed that are not being used by internet connection sharing" Any help would be deeply appreciated
Topic by lioneatr | last reply
I have a xbox 360 that used to work. My friend tried to fix a 3 RROD on it. He said he tried many times to start the xbox up it would show a green light for a second, then turn off. I now tried starting it without the fans or heat sink, and the power brick light turns red. Can anybody help?
Question by jbaker22 | last reply
I just want to hear what you guys think about about the new xbox, which was released yesterday, I have heard it has built- in Wi Fi, quieter running, looks good and has a massive 250 gb hard drive. PS3 owners don't start bragging about ps3 here, just honestly say what you think about it. Advantages over current XBOX 360: >250 GB Internal Hard Drive >Improved reliability >Internal Wi Fi at the strongest strength, not en extra £60 ($100) >Kinect Ready >Only $299 0r around £180-200 (same price as the current elite) >Amazing new retro looks to the original XBOX here is the Microsoft Website (a bit biased though!) http://www.xbox.com/en-US/hardware/
Topic by TheFoofinator | last reply
I saw the website of Ben Heck (benheck.com) and I was wondering if it is really necessary to modify the heatsinks for the GPU/CPU and replace the fans. I am planning on making a portable xbox 360 in an alluminum suitcase with the LCD screen from a computer monitor. Is there any easier (legal) way to wirelessly obtain xbox live? What resolution monitor should I get? Any advice?
Topic by MattGyver92 | last reply
I have a xbox 360 controller and would like to do the rapid fire mod. however i cant tell whether i have the new or old version of the controller( mod doesnt work on new version) i have the metal box/thing every 1 is saying is the crystal, but its on the backside of the circuit board. how can i tell if my controller is new or old version?
Question by killjoy111 | last reply
I had an idea for a xbox disk changer, considering my extreme laziness. Basically, It would be an old music disk changer with the same xbox style disk drive in it. The drives ribbon cable would connect from the changer to the xbox, then I'd record the disk switch (up & down) IR signal, and put it in my xbox controller. like www.instructables.com/id/Done/ . So to sum it up, I want to make a 6 disk xbox changer and put the remote in my controller. What I'm asking is how much of a hassle, and even if this is even possible. Thanks in advance ~Nameless~
Question by Nameless37 | last reply
I know that it's possible to add "rapid fire" mod buttons to an xbox 360 controller. My question is, is it possible to add a similar button, but just have it do a non "rapid" function. As in a button on the back is just a shortcut to say the "Y" or "A" button. Not that I want to remap the Y back there, but just it there as also working. If it is, is there a guide out there on how to do it?
Question by Soldier62994 | last reply
Is there anything I can do to mod my Xbox 360 controller? I've researched long and hard, and I have no answers on what it is called that allows the newer ones to be modded... The closest answer I've found is a "rf crystal". Can I add something, or take something away? Please help......
Question | last reply
Ground off plastic dust from my Xbox 360 controllers casing have fallen into the controller, making the analog sticks stick when I move them, how do I fix it?
Question by Aeshir | last reply
I have an Xbox 360 wireless controller and i also have the charge and play cable for it, and i was wondering if i would be able to use this cable to connect my controller to the pc, and use it for gaming
Question | last reply
Ok, my Xbox 360 headset is not working correctly. I was using it alot, but when my bro used it, something happened, it didn't have sound coming from the earpiece. I could still talk. But the metal thing that plugged into my controller seemed as if it wasn't making a good connection, so when i wiggled it sounds came from the earpiece, I wiggled it more and I could hear again, a few weeks later it wouldn't make any sound at all. This has happened to many of my Xbox 360 headsets.
Question by mmartin7 | last reply
What kind of torx screw drivers do you need to open an xbox 360 controller? not the size just the type because mine wont fit because of the pins in the middle of the screw. please help?
Question by nckballer | last reply