I just worked on a Husqvarna 142 chainsaw for a friend. Yes, there are openings in the side of the machine so the Low and High carburetor screws can be adjusted, but a special tool is required, or parts need to be removed from the saw so the screw shanks can be grasped with a pair of needle nose pliers. A special tool is svailable for about $6 US. It fits over the longitudinal ridges on the upper part of the screw shank. I discovered the right size of semi-rigid plastic tubing makes an effective adjustment tool. Just cut a length three or four inches long. Push one end onto the desired screw shank and turn to adjust. The tubing is rigid enough that it does not twist, but turns the screw needing adjustment.
Topic by Phil B | last reply