alternator cadillac?

How to change alternator in a 1998 cadillac deville

Question by bockenstedtgary   |  last reply


Used alternator

I went to a salvage yard and got a used alternator . My kids dad is freaking out on me because, he says I got screwed. Apparently there should be a bolt that came with the used alternator that is used to hook up the positive wire on the alternator. Is this trie?

Question by AngieC78   |  last reply


Car alternators... Answered

Isnt a car alternator just an electric motor that is acting as a generator? is there anyway to put two old matching ones on a base, attach tires, and power them with a car battery?

Question by hellstudios   |  last reply


Dremel Alternatives?

Is there any alternative for a dremel so that I could widen the hole in my NF so that the new barrel would fit in?

Topic by crinal123   |  last reply


Soil Alternatives?

What are some good soil alternatives? You see, I want to grow a simple bean plant, but I  can't use any soil (since I will eventually make a mess in my apartment, and it'll be hard to clean it up).

Question by GreenSkys   |  last reply


Alternative for 2n1613? Answered

Hi, i cant find 2n1613 transistor here in my city. i want ur help in letting me know of any alternating transistor that i can use for my project. i'm making a mini variable power supply using this transistor but because of the shortage i'm unable to complete my project. i need ur help asap.  THANKS

Question by pizzadox747   |  last reply


alternatives to MAX756?

hello im writing the best english i have ,cause its not my natural language can u say me alternatives for the MAX756 that have this caracteristics imput voltage: 1.5vDC ( an AA battery) output voltage: 5vDC @ more than 100mA the IC needs to be DIP ( no SMD please! im very noob soldering)

Question by Delta25 


Glass alternative

I have a large map (55" x 40") that I am building a frame for, yet there's no way I can afford a piece of glass this large and am looking for cheap alternatives. I am aware of plexiglass, but am wondering if there is anything else out there. My last ditch resort is to laminate it, but do not like that idea to much for aesthetic reasons. Thanks

Topic by MutinyDK   |  last reply


Alternative to L293D?

Hi all. i'm pretty new to the electronics thing, and i'm just getting started with Arduino. i've decided to move on to motorized projects, such as IP cars and such, but i can't seem to find any decent motor controllers. as far as i can see, i need an L293D chip, but can't find one anywhere in south africa. are there any alternatives i could try? my appologies for being a noob. Thanks :-)

Question by dasta   |  last reply


Alternatives to Blender?

I hate blender, I really do, I hate Python and I hate the interface and most of all I hate wading through their site, does anyone know another good free 3d modeling software, preferably one with .nif capabilities>

Question by Crakur   |  last reply


alternatives to fiberglass

Hey guys im building an enclosed recumbent motorcycle and i am a bit stuck. im making the outer skin. to get a working aerodynamic shape, complex curves and all i want to use some flexible sheet which i can connect to the strong points of the motorcycle. i am thinking of using that polypropilene chicken wire, and i wonder if it would be good enough to be the base of the fairing and put fibreglass on top. my brother wants to use cedar strips as a base and cardboard strips mounted over them and fibreglass the resultant mess. then bondo the lot. any ideas. i am not describing this very well. a single sheet of a flexible matting will save me the trouble of making a mould of the fairing. thanks guys.

Topic by maninamousesuit   |  last reply


Alternative to keyboard

On top is a joystick like an NES joystick. It registers 8 different directions: up, down, left, right, and the in-betweens of those and is controlled by the thumb. Then there are 4 buttons, one for each finger. The joystick replaces the trackpad of a laptop and hopefully is also 'clickable'  to act as a 'left click button. I'm not sure what would do the right click button. Combinations of button presses and joystick directions would replace the keys on a keyboard. I only have the use of my right hand. I initially thought of this as a device for handicapped people like myself, but it would also be good for people lying in bed. The concept maybe could be made into a cell phone case with physical buttons that would allow people to text without looking at their phones. The device is a lot like the nintendo wi remote, but not quite. Maybe a wii remote could be hacked to make a prototype. I wouldn't know how to do that and I wouldn't know how to program it, that's why I'm posting, to see if someone could tell me what kind of skills/knowledge would be needed to make this idea happen. Any suggestions or offers to help are welcome. Thank you!

Topic by avocadostains   |  last reply


Alternative Nuclear energy

p.MsoNormal, li.MsoNormal, div.MsoNormal { margin-top: 0.0in; margin-right: 0.0in; margin-bottom: 10.0pt; margin-left: 0.0in; line-height: 115.0%; font-size: 11.0pt; font-family: Calibri , sans-serif; } p.MsoHeader, li.MsoHeader, div.MsoHeader { margin: 0.0in; font-size: 11.0pt; font-family: Calibri , sans-serif; } p.MsoFooter, li.MsoFooter, div.MsoFooter { margin: 0.0in; font-size: 11.0pt; font-family: Calibri , sans-serif; } p.MsoListParagraph, li.MsoListParagraph, div.MsoListParagraph { margin-top: 0.0in; margin-right: 0.0in; margin-bottom: 10.0pt; margin-left: 0.5in; line-height: 115.0%; font-size: 11.0pt; font-family: Calibri , sans-serif; } p.MsoListParagraphCxSpFirst, li.MsoListParagraphCxSpFirst, div.MsoListParagraphCxSpFirst { margin-top: 0.0in; margin-right: 0.0in; margin-bottom: 0.0in; margin-left: 0.5in; line-height: 115.0%; font-size: 11.0pt; font-family: Calibri , sans-serif; } p.MsoListParagraphCxSpMiddle, li.MsoListParagraphCxSpMiddle, div.MsoListParagraphCxSpMiddle { margin-top: 0.0in; margin-right: 0.0in; margin-bottom: 0.0in; margin-left: 0.5in; line-height: 115.0%; font-size: 11.0pt; font-family: Calibri , sans-serif; } p.MsoListParagraphCxSpLast, li.MsoListParagraphCxSpLast, div.MsoListParagraphCxSpLast { margin-top: 0.0in; margin-right: 0.0in; margin-bottom: 10.0pt; margin-left: 0.5in; line-height: 115.0%; font-size: 11.0pt; font-family: Calibri , sans-serif; } span.HeaderChar { } span.FooterChar { } *.MsoChpDefault { } *.MsoPapDefault { margin-bottom: 10.0pt; line-height: 115.0%; } div.WordSection1 { page: WordSection1; }   Alternative  Nuclear energy. Our main source of  energy right now is nuclear energy. Although Nuclear energy  might seem to be a reliable source of energy, it is not.  Nuclear energy is not a reliable source of energy  because you need to extract Uranium ore from the earth's core which might seem as a good  source of Uranium it is not. This is not a endless supply  of uranium because it will eventually  run out of uranium .   So what can we do to solve this issue? The answer is alternative energy.  Alternative energy  is energy that can be renewed  and that is reliable. One solution is replacing Uranium fuel rods in a reactors core with Tritium. Tritium can be used  as a substitute for uranium because it has the same properties as uranium except that it has a shorter  half life.  Tritium is made by fusing solid  Hydrogen With Lithium  in a Farnsworth reactor.  This also has its problems one major  problem is the radiation and heat that is generated during the process  of fusion. Tritium can be then used as a fuel  pellet for a Nuclear reactor when it is mixed with Deuterium which is a solid. Tritium is also a good fuel pellet because it only has a life span of about 12.4 years, then  it decays into Helium 6 which is very harmless. Uranium on the other hand is not  safe because it has a life span of about 2000 years and it gradually decays into other radioactive material such as Thorium, neptunium, ECT.... This is Called the Uranium - Thorium cycle. The tritium is also ecologically friendly because it  can be made from H1 which is found in water H2O.  H1 is called Portion and is extracted through a process called electrolyses in which water is charged by a D.C current.

Topic by dciocoiu   |  last reply


An alternative to sit-ups? Answered

Are there any harder alternatives to sit-ups that require little or no extra equipment?

Question by SirNoodlehe   |  last reply


alternative to conductive thread.

Ok guys, so i was finishing up a project with my guitar, and i ended up replacing the strings. so i though to myself... what can these be used for. I decided to use them in a project im working on involving a belt, and regular wire would not work well. So, i weaved the guitar string throughout the belt, like you would with conductive thread, and its very very strong, and also flexible. And since its meant to withstand a beating it should last nearly forever. The strings i found to work best are the 3 smallest ones, E B and G, the others are too rigid to bend as much as needed. in the picture that is the third string, so it is more rigid then the first on would be, and i found it to work excellently for what i needed it to.

Topic by adem70 


Alternative scrolling methods

Here's one to challenge your creativity. I read a lot of blogs, engadget, lifehacker etc... and these are mainly long pages of text and images. I've become bored of using a plain ole mouse wheel to scroll down and so i'm looking to make something overall cooler or easier to use. Note the use of OR before reading the next bit. I've had an idea of one method. Get one of those realistic fake cats that breathes and put the scroller in it's back. Then you can cradle it in your arms Dr. No style and stroke it's back, all the while scrolling down a page of your choice. I also thought of somehow making the whole right side of my desk a massive scrollbar, but it would be a bit complicated for my liking. So what do you think? Do you have any good ideas for ways to scroll down a page? Think everyday actions that involve some sort of scrolling motion, and keep it work safe.

Topic by whatsisface   |  last reply


Homemade epoxy alternative?

Hey all, I need epoxt for many reasons, and for many reasons I cannon get/use it. So I am wondering... Does anyone know of a good homemade solution that is comparable to epoxy? It needs to harden to a really solid finish. Thanks!

Question by I_am_Canadian   |  last reply


cool alternative to bed? Answered

hello all i have a slight problem you see i HATE my bed it is very firm and is not really that good on my back too  the list goes on so what i want to do is build /make something that will finally let me get a good night's sleep i would like a hammock but i cant put any form of hole in the walls what i want ideally is a bean bag bed but i don't know if packing peanuts would work really well thankyou, fidgety

Question by fidgety2   |  last reply


windmill with car alternator

Hi there,i want to know if it is possible to build a windmill with a car alternator to produce free electricity,and if there are any plans available?

Topic by merwe   |  last reply


Is there a cheaper alternative to arduino? Answered

What is the alternative, and what are the pros and cons compared to the arduino

Question by sunny342   |  last reply


alternator control mechanism

Im planning for a project on alternator control mechanisms. can anyone provide me relevant ideas about the topic?

Question by Puranjay Menon   |  last reply


Alternator to generate power?

If got an old car alternator and want to connect it to a battery, I'm using a waterfall to turn a bicycle weel with blades, to turn the alternator. is the slow speed going to be a problem?

Question by HermannR6   |  last reply


AC187 Transistor Alternative???

Hi I was wondering if anyone knew of any Silicon or Germanium alternatives to the AC187 Transistor. Also is the BC548 or BC547 Silicon Transistor an alternative to the AC187 Germanium transistor?  Thanks in advance

Topic by Ikram1ali   |  last reply


ac alternator mentinace?

Plz tell me how work ac altenator and how to check the avr and rectifire bridge and diod kit

Question by baigoo   |  last reply


What is an Alternating current? Answered

It is always easy to understand the working of Direct current, but I need to know about Alternating current right from the basics till advance. I would be grateful if you could help me understand about Alternating current better.

Question by DeeptiR3   |  last reply


Alternate IC for PIC16F688...? Answered

Im making 5x5x5 LED cube display and im unable to find micro-controller IC PIC16F688. Can anyone suggest alternative IC...

Question by Abhishek.mathur   |  last reply


Alternate uses for nebulizer?

Can I make an  air brush ?  Ideas, please.

Question by NotAPot2PN   |  last reply


Alternative-future at SXSW

This event at SXSW on Monday the 12th looks pretty damn awesome.If anyone attends, please post pictures or links to pictures to the SteamPunk group.

Topic by jeffreyf 


Alternator use and output

Hail the reader and Bless the respondent. please can someone tell me the following 1. At what speed must a normal vehicle alternator turn to give max output... and what is this out put... I see my charge meter shows it charging at 10 amps... how long to fill the battery at 10 amps? 2. A pack of 6 12v truck batteries connected to make 1 big 12 volt battery... is it possible to charge this pack from more than 1 alternator and will it speed up the charge time to make the battery full to max?

Topic by carnut34   |  last reply


Alternative-future at SXSW

This event at SXSW on Monday the 12th looks pretty damn awesome.If anyone attends, please post pictures or links to pictures to the SteamPunk group.

Topic by jeffreyf 


PMA ALTERNATOR AND ROTOR

Hello to all, I recently purchased a Permanent magnet alternator that will produce 12 volts at 150 rpm. I have already made my own 31 anches blades (3 blades), got a hub out of an old air aconditioning unit, but the problem is that this hub has the blade mounting angles in the opposite way...in another words it will spin counter clock wise :( Will this afect the energy output??? I would really appreciate any help on this project... Thanks in advance. Feliperey

Topic by feliperey 


Tip31 Transistor alternatives

I teach middle school science, and I'm helping a small group of keen students work on DIY projects.  One of the students wants to try this: https://www.instructables.com/id/Music-LED-Light-Box/ It calls for a Tip31 Transistor, which is proving difficult to find, at least in Canada.  The comments section suggests at one point that any NPN transistor will do. Can anyone confirm this?  Or can you suggest more readily available alternatives? Thanks!

Topic by dochockin   |  last reply


PMA ALTERNATOR AND ROTOR

Hello to all,I recently purchased a Permanent magnet alternator that will produce 12 volts at 150 rpm. I have already made my own 31 anches blades (3 blades), got a hub out of an old air aconditioning unit, but the problem is that this hub has the blade mounting angles in the opposite way...in another words it will spin counter clock wise :( Will this afect the energy output???I would really appreciate any help on this project...Thanks in advance.Feliperey{{{ }}}

Topic by feliperey   |  last reply


New ball alternator

Hey I was thinking about having a new ball alternator well at least a idea. I made a model on this knex modeling thing. Well how It SHOULD work is that it is encased in a cage where the ball falls down and a motor will be turning the fan like things. Underneath the fan there might be 1-4 ball path. The fan will move and thus it will make the ball fall randomly in one of the 4 paths. I'm running out of pieces and I don't want to take apart my ball machine that i'm making so you guys can try to make this is you want. It might also be hard to see the yellow rod behind the red one.

Topic by rexdino5   |  last reply


Natural alternatives for insecticides?

I know its a bit early but the early bird gets the worm!!! In my area pesticides are banned for use on personal gardens and lawns for about 2 years now. Last year my poor peach tree really didn’t have any edible and or usable peaches on my tree because of infestations of bugs. I was wandering if any of you knowledgeable people could direct me on what kind of natural insecticides I could use in the future for my peach tree?so I can at least have some edible peaches for eats and jam. The squirrels usually take their share too. *darn little buggers!!!* Thanks. :)

Topic by Treasure Tabby   |  last reply


Alternative clock-Mechanical

I need to build a device for a competition that can measure time acurate to the tenth of a second, but from its starting position it must be no more than 30cm in dimension, but can exceed that once it begins.  Even if you know of something that can do seconds that would be fantastic.  If you have any ideas or places to find plans please do tell.  IT CANNOT USE ELECTRICITY

Topic by danielsb7676 


Alternative Clock-Mechanical

I need to build a device for a competition that can measure time acurate to the tenth of a second, but from its starting position it must be no more than 30cm in dimension, but can exceed that once it begins.  Even if you know of something that can do seconds that would be fantastic.  If you have any ideas or places to find plans please do tell.  IT CANNOT USE ELECTRICITY

Topic by danielsb7676   |  last reply


Alternatives to kite power

I was looking though my old MAKE magazines, and found the schematics for a Kite Aerial Photography rig. For those unfamiliar with the term, it's a camera attached to a kite that allows for aerial photographs to be taken remotely. However, I live in Texas, and the only time the wind blows here is when it rains. And rain means lightning. So, rather than risk electrocution, I'd like to come up with some alternative methods of lift. I was considering a large helium balloon (like a weather balloon), but I was wanting something that I could say I made myself. Then I considered hot air, but I'm not sure how large a homebrewed hot air balloon would have to be to lift a camera. Any suggestions?

Topic by ninepound   |  last reply


alternative stepper motors?

I recently tore into a couple printer-scanners looking for stepper motors. Unfortunately all I found were some DC motors that seem to be tied into some sort of sensor that acts like a step counter. Does anyone know what they are called and how to use them in place of stepper motors for a CNC machine? As a side note, I have a very limited understanding of IC function, think of me as having lived a purely analog lifestyle.

Topic by 50ul84n3   |  last reply


High Frequency Alternators

Look at a picture of some arcs from a common spark-gap Tesla Coil, and then compare it to the arcs from a solid-state. What makes the two so different? The difference comes from the Solid-State Tesla Coil to operate in CW (constant wave) mode. This means that its power supply is uninterrupted, whereas in a spark-gap type, power is being switched on and off hundreds of times per second. If the output terminal of a CW coil doesn't have a brake out point, no corona or spark will occur. For anyone who's investigating wireless power transmission or Tesla's version of radio, this is a very helpful feature, since corona only wastes energy. And if it does have a brake out point, it can create some pretty interesting spark displays, as I mentioned above. An arc to a grounded object increases the current in the arc to such a point that it turns into a white-hot "flaming" discharge. All-in-all, a CW type coil is a pretty interesting kind to observe. But solid-states can be pretty difficult and annoying to build, and expensive as well. Since solid-state technology obviously was not available to Tesla, he found a different way to operate his coils in CW mode- a generator that was specially designed to produce radio-frequency power. He had originally created it for high-frequency arc lighting. Today, I have seen absolutely no coils run by a high frequency alternator. Of course, an alternator would be admittedly difficult to build, but since it could probably deliver more power than a solid-state coil, it would be worth it. Does anyone know if there are any companies that still make these alternators? Would anyone be interested in recreating it? Should we even bother? Thank you for listening. Peace!

Topic by ElectricUmbrella   |  last reply


Any Maple alternatives?

I need a something that plots graphs (three-dimensional is better), solves differential equations and counts integrals - Maple would be ideal - plus I think that learning to use it is a nice constructive thing to do in the summer before starting university, but it costs a lot more than I can painlessly pay...  Any ideas? Probably some older versions are free or cheap, or there are any other programs? I looks like I'm only going to use it in the summer as they probably should give something to students... To be more specific, I'm trying to learn GTR and calculate some geodesics.

Question by gruffalo child   |  last reply


Alternative Photography Project

I am currently in the Advanced Photography class at my high school. One of the assigned projects is simply titled "Alternative Photographic Technique." Basically, we have to create an image without using 35mm film (not digital, either). The specific techniques that he recommends are:Photogram-arranging objects directly on the photo paper, without using a camera at allHolga- The teacher has a few Holga cameras with 120 film for class use to take artistically lousy imagesPinhole Camera- If you don't know what this is, you probably can't answer my question anyway.Cyanotype- a special emulsion is painted on watercolor paper, then exposed in sunlight under a large transparency. Search "cyanotype" to see what it is.Polaroid image transfer- an image taken with a Polaroid Two-Step camera is transferred from the film to watercolor paper-looks cool, but expensiveCan anyone suggest other interesting ideas? I'd like to keep it simple and inexpensive, and I have to have 8"x10" total printed image.Weissensteinburg? Are you there?Edit 5-12-08: I have printed some 5x7s with my cool new technique. I matted them today, and I turn them in on Thursday.

Topic by CameronSS   |  last reply


Alternate Login Bug

I just found this bug today when I used the logout button to check something. I tried to log back in using the bar at the top and it did not work, I tried this multiple times. Then I went to a random forum topic to post a topic to see if I could log in from there, it did not work. Then I clicked on a link I had for my "You" page and I was able to get to it. I then left my "You" page to go to the forums and I was instantly logged out again. I tried this multiple times to log back in and eventually I tried closing my browser (latest version of FireFox) and opening it up again and going to the login page to see if it would work and it did. So, can anyone explain this because I am not sure what is going on, I think it has to do with the login cookie that keeps members logged in. Anyone want to help? UPDATE (2/8): The problems seems to have gone, it must be one of the bugs that people get every once in a while.

Topic by n8man   |  last reply


Cheap plexiglass alternative

So i was going to make a desk. I was gonna make it about 2x3 and make the top out of two pieces of plexiglass, with about a 1 inch hollow area between them. I was gonna put some lights in that area. However, Plexiglass is costing a bit more than i want to spend. so I found this: http://www.homedepot.com/h_d1/N-5yc1v/R-202653810/h_d2/ProductDisplay?langId=-1&storeId;=10051&catalogId;=10053 Its ALOT cheaper. However, can it support a decent amount of weight probably? No ones gonna be sitting on the desk or anything. I would say NEVER more than 50 pounds on it, but 25 is probably gonna be the maximum, and not even that most of the time. (just gonna have my laptop and stuff on it, maybe some textbooks). And im assuming a blue light LED would shine through it fine..I kind of want the frosted look (would sand it down a little bit to get rid of the "bubbles") to give it an effect similar to the lights in this: https://www.instructables.com/id/LED-Glass-Desk/ except without the notifications and stuff.

Topic by abkarch   |  last reply


alternative ignition of thermite

Allright im looking for information on a number of different ways to ignite thermite. sure we've all heard of magnesium and yes it's usually third or fourth time is the charm also potassium permanganate which is pretty cool too and the ever popular sparkler of course lots of companies have taken out the magnesium chlorates and perchlorates from these sparklers and are now selling crappy ones without hazmat fees for them so they don't work worth a crap. i read an article from a guy stating he used simple visco fuse to light it even though ive heard it won't work but perhaps it depends on the mesh as in much finer. i use the dark german aluminum about 625 mesh and it will coat any and everything it touches. really though guys let's come up with some ways to lite thermite outside of tradition and share these methods of doing so along with how to obtain materialsin conventional and unorthodox ways because without frst time reliable ignition it's just no fun. also the first fire mix, much like the thermite ignition mix at united nuclear what exactly is it made of and how are some ways the monetarily cahllenged can obtain it and of course the not so challenged.

Topic by pyracantha   |  last reply


how to build a large manual air pump to suck in 1000 cf of air and push it out

The air will be forces out into a bag that is under water in a tube that is 6' dia X 10' deep. the air must fill a 8 cubic feet bag in 20 to 30 sesond. who much force must be places on the handle to such the air iin and most importantly to force the air out into the bag? is this even posible to build?  the hight of the manual air pump is not an issue the dia is lineted to the dia of a steel tube I can get. thank you wlglover  

Question by wlglover   |  last reply


Alternative power sources for a coilgun?

I was wondering if there was any other method to power the firing coil of a single stage coilgun without using capacitors.  My main reasoning is to try to reduce recharge time, and to also avoid making massive groups of capacitors and finding a place to put them. It needs to be able to be powered by some form of battery, meaning I could connect voltage to this circuit (1.2 volts up to 12 volts.  I'm not picky) and shouldn't consist of hard to find components. I'm not looking for the greatest efficiency in the world, just making a step (okay, maybe a stomp) toward building a 'capless coilgun'.

Question by Madrias357   |  last reply



MP3 input alternative on a stereo

Hi guys, I have a really burning question thats been eating me for a while. Can you put an alternative input on a stereo system to read mp3s? For example i have this stereo that plays mp3s but only has the disk input. This means in order to use it i have to burn the songs i want off my computer on to a disk then i can listen to my music. For those who probably WILL ask, I don't like playing my music off my computer because it's generally really loud, i want to use this in another room as well. My taste in music constantly changes, eventually i will want to remove a couple songs or add new ones. With that said, i want to know if you can remove/replace or add another input system to where a CD reader would be so that it reads a USB input or something. Then music can easily be manipulated to the users liking. As long it's not directly connected to a computer or requires the user to make new copies of the same music that take up space. Thanks!! Gonazar

Topic by Gonazar   |  last reply