Search for athlon in Topics


AMD athlon 64 CPU for sale

I have one AMD athlon 64 CPU ( 2.2 Ghz ) for sale; two sticks of 256MB of DDR RAM and a heat sink for the CPU. I tested them and they work The price I am asking for is $25 for all of it.

Topic by inductionheat!    |  last reply


can i up grade my zv5000 amd athlon processor to what maximum processor? Answered

I have a computer hp zv 5000, i want to up grade its athlon 1.6 processor, is it possible to upgrade to maximum what extent?

Question by hashmi121    |  last reply


Whats better, a Turion 64 X2 or a Athlon 64 X2?

I want to know because i have both of these, and my Turion 64 runs pretty hot, so if anyone can help me out here, it would be appreciated. they are both 1.9GHz dual cores, both 64 bit capable. What i want to know is, does the Athlon run cooler, and is there anything that puts it above the Turion?

Question by zack247  


Installing a new processor.

Hi! My name is Kerry. I have an HP Pavilion a1410n PC. Where can I get a free manual for my (Asus A8n-LA GeForce 6150 LE Socket 939 mATX motherboard ? I'm trying to replace my ( AMD Athlon 64 3800 ) processor with a ( AMD Athlon 64 x2 4800 ) processor, and need to know if there are any jumpers I need to change. Thanks for your help in this matter. Sincerely, KC2Z

Topic by kc2z    |  last reply


I need Help with overclocking!

I have an amd athlon 2 x2 245 processor which runs at 2.9 ghz.  My games and computer runs slow when i run too many processes but i would like to have more processes then i can currently run.  I have 8 gigs of ddr3 ram which is good. but my processor isnt the best. I do have a cpu meter and it hits 100% when i first boot up my games. with chrome and my gadgets running it stays from 15-35%.  So any help would be greatly appreciated.  Thanks,                                                                               Logan

Topic by loman1997    |  last reply


Will this motherboard support a dual core CPU? Answered

I'm helping my friend do some upgrades on his computer, it's a Compaq Presario SR2034NX desktop. I'm wondering if it will support a dual core processor or not. According to HP, it doesn't, but looking around on the internet, I've seen quite a few people have upgraded to dual cores. However, there's some minor differences with this particular motherboard. It seems that there are actually two different types of motherboards with the same model number from Asus (A8M2N-LA). On the HP site they have different HP model numbers (a more advanced board - the NodusM3-GL8E, and the one I have - the Naos-GL6; both with the same A8M2N-LA number for Asus) It appears that the NodusM3-GL8E supports all sorts of fun things like 8 GiB of DDR2 800 RAM and dual cores up the wazoo. However, the Naos-GL6 looks like a stripped down version of the NodusM3-GL8E (two less RAM sockets, etc.), so it might not support a dual core. I'd like to know before purchasing, since Newegg won't accept processor returns for a refund. Also, 800 Mhz RAM would be nice to have, HP says it only supports 667 Mhz RAM but other people have put 800 Mhz in with no issues. Does anyone know if my friend's mobo will support a dual core and 800 Mhz RAM?

Question by RelaxedSoup    |  last reply


Will this processor be able to handle good games?

I'm looking at an AMD Athlon II X4 645 Quad Core Processor and I just wanted to know if this will be able to play games like Portal 2, or Black Ops without lagging.

Question by Ke-Bob    |  last reply


Good motherboard, for just starting custom builds?

Hi, I am relatively new to building custom computers. However, I feel like I know enough to actually build one. The first problem I'm having though is finding a good motherboard. I won't be doing a whole lot of hard core gaming, but probably a little(Halo, Fallout 3/New Vegas, MW2, etc...). So I would say I'd need the following specs(minimum, more is usually better): 4GB DDR3 RAM PCI Slot(s) 3 SATA devices(2 HDDs, 1 Disk Drive) 500GB HDD(s) AMD AM3 Athlon II x2 445 VGA & DVI I think I've found a good mobo to fit this bill: GIGABYTE GA-785GMT-USB3 Can anyone vouch for it, or offer a better suggestion?

Topic by metrogdor22    |  last reply


what should i add to my gaming pc?

Amd athlon ii 250 asus m2n68am plus 2 gb ddr2 ram  pny gt 220 1gb ddr2

Question by heavydeath    |  last reply


Electroplating gold

I was wondering if anyone knows if the same principles involved in nf119's instructable are applicable to attempting to electroplate something with gold.Also, would the pins of an old CPU (in this case, an old Athlon Thunderbird 1ghz) be made of pure gold that can be used to electroplate?Thanks!

Topic by dizzytired    |  last reply


Bulding up a new PC, which one would you think be the best? Answered

Intel ·ASUS P7P55D - Intel P55 Chipset  - LGA 1156  - DDR3 (2133MHZ OC), 2x PCI Express 2.0 x16 (CrossFire Support) - Special Features - TurboV EVO OC Processor (2nd Micro Processor onboard) 12+2 Xtreme Phase Power, T Probe (Active cooling Microchip), Asus EPU · Intel Core i5 750 Lynnfield Processor - 2.66GHz Quad Core, 45nm, LGA 1156, 8MB L3, 2.5GT/s DMI Interface ·Patriot 2048MB DDR3 1333MHZ MEM x2 ·9800GT 1GB FORSA GRAPHICS CARD or AMD ·Jetway 770 Socket AM2+/AM3,AMD™ 770 Chipset and AMD™ S700 Chipset ,Supports AMD Socket AM3/AM2+/AM2:AMD Phenom series processors, Athlon 64 X2 / Athlon 64 FX / Athlon 64 / Sempron processors,HT 3.0,Dual Channel DDR2/DDR3 memory technology ·AMD Phenom™ x4  Quad Core (9650) 2.3GHz Processor ·Patriot 2048MB DDR3 1333MHZ MEM x2 ·9800GT 1GB FORSA GRAPHICS CARD

Question by Ortaega    |  last reply


electric current of Motherboard (approximately)? only motherboard, processor and ram, no HDD, PCI, PCIe, DVD Drive?

I made a plan to make the battery for the motherboard, I want to know, how much current is needed. I asks this because I have broken mutimeter. and i have a plan to buy MSI 785GM-P45, amd athlon II x2 245

Question by Rendydevara    |  last reply


Can i swap out my processor?

My family just got a new computer. However, the processor on the new one sucks compared to the old one. Old processor: AMD Phenom x4 9100e quad core processor New Processor: AMD Athlon II 170u processor is my old processor compatible with my new computer? How do i swap them out?  what risks are involved? will any data be messed up? please help...

Question by quellek2    |  last reply


Aztech USB 2.0 Adapter Modem

In my area there is a free WiFi.. but the main router too far from my house - around 500 meter...i try to make antenna as i found in this web.. The PROBLEM.... when i put my antenna top of my house (around 15 meter and extend the usb cable) and Iusing Aztech USB 2.0 Adapter, my pc cannot detect the adapter. any idea ? or should i replace to another adapter.. my pc processor is Amd Athlon & using Abit Mainboard - 2.0 usb hub help me please...

Question by koma4194    |  last reply


Mac and Pc

I am trying to install Mac OS x on my AMD pc but when i get to disk utility's i don't see my hard drives so i cant format it and i cant install Mac OS can any one help.i am using Kalyway_Leopard_10.5.2_DVD_Intel_Amd from this link i know its wrong to pirate things but really im only installing this to try it. i am thinking of buying a mac or at least a mac license.Now to the technical information.i have 3 partions set up 1 for windows:50G NTFS1 shared:10G FAT321 for Mac OS x:45G FAT32i have aCompaq presario F700 with xpAMD Athlon 64X2 Dual-Core Processor TK-57 1.60 GHz, 960MB of RAM

Topic by chrischavez    |  last reply


Why wont my arduino let me upload ? Answered

Hi there, I have had my dumilanove for a few weeks now and i have suddenly started getting an error when trying to upload to the board I have not added or removed, or changed any settings that im aware of here is the error code: avrdude: stk500_getsync(): not in sync: resp=0x30 avrdude: stk500_disable(): protocol error, expect=0x14, resp=0x51 Also when i push the reset button on the board, the led on pin 13 doesn't light, but it used to. I have a sad feeling this is to do with the bootloader my pc spec is below: Windows 7 64-bit 4gb ram 2ghz 1 mb l2 chache - AMD Athlon II X2 M300, Running arduino 0022 Please could someone help me, Thank you!

Question by DrWilson    |  last reply


What should I do with all my old computer parts? (besides throwing away/recycling.)I h?

I have a few old computer parts, and nothing to do with them. Here's what I have 3 old motherboards, 1 working socket 478, 1 broken, 1 pentium 3, not sure. 1 old nvidia agp video card, might be working 5 cpu's, 2 working laptop ones, a 200 something mhz pentium pro, a 533 mhz celeron, broken pentium 4, probably broken athlon 64, unknown pentium 3 4 modem cards, all working, I think 2 laptop motherboards, 1 broken, one working but missing pieces, 3 broken hdd's, 1 2.5", 2 3.5" lots of sticks of ram I have no extra working hard drives or power supplies, so I can't use any of the parts. Any Ideas on what to do with them? I've already used some of them for a contest on Guru3D.com

Question by ben_k    |  last reply


How to upgrade an old PC to a simple media PC? Answered

I have a very old desktop about 7 years old and its in a very bad condition and can be barely used. It was a home computer before this and  now not many people use it anymore. So I would like to convert it to a media PC to attach it to my TV. I just want a simple media PC that I can watch streams and watch downloaded movies in good quality(Full HD) and just simple PC uses. So I was thinking of upgrading my old PC to a media PC by changing some parts like the graphic cards and all. Bare in mind this is my first time attempting to build a computer so im not very knowledgeable on it. However, I do know the basics of each components in the PC. These are the specs of my old pc ;- -AMD Athlon(tm) 64x3 Dual Core Processor 4200 + 2.2GHz -3.00 GB RAM -NVIDIA GeForce 7300LE -250GB HDD harddisk -32-bit Operating System When I opened up the PC it was in a bad condition and full of dust. When I took out the heat sink, the CPU was stuck to it so I think I damaged the pins of the CPU when I took it out.( But I wanted to change that anyway) By the looks of it there is barely anything I can salvage other than the case. I have attach some photos to show you the condition of it.  I would like to ask some help on some links or advice on is it possible to salvage anything(motherboard maybe) and what components should I be looking at for the uses I want it to carry out. I know a lot of people will suggest to just buy a brand new pre-builld desktop but I really want to try to build this for the experience so I can build a better PC next time in the future.  Thank you very much, Every answer is much appreciated.

Question by KhayhenS    |  last reply


Home Security (take two) Windows or Ubuntu? Server or Desktop?

I've had a little experience with the security system setup from my last post, but I moved, and I'm going to try something different. Should I use Ubuntu Desktop or Ubuntu Server for webcam monitoring? I'm a Windows user who would like to eventually learn how to use Linux as well as i can use Windows. But in the meantime, I'm about to set up webcam monitoring in my house. I've got a few USB webcams, and one LinkSys wireless webcam. I'll obtain the monitoring software from a third party. I need an operating system that can handle processing four video streams as well as running the security software. (I'm also going to use remote admin software so that I can have a "headless" setup.) I'm currently running WinXP Pro (Corporate) on a machine with an A.M.D. Athlon rated at 1.02 Ghz with 2GB RAM. A friend of mine recommended that I use Ubuntu Linux, which I think is a great idea. The problem is that I don't know if I should use the Desktop or Server edition of Ubuntu. Also, since the rest of my network (and family members) uses Windows, the remote admin software I use either has to be cross-platform, or be Linux compatible with a web-interface. So should I use Ubuntu Server or Ubuntu Desktop? Or should I stick with Windows? Also, as far as the webcam security software is concerned, I need software that handles multiple streams and has options for motion detection, record on event, notification through email, and a web interface (HTTP server). Also, FTP options would be nice to have, but are not required. Any suggestions for this? (Win?/*nix)

Topic by NozeDive    |  last reply


Can someone help in changing motherboard and CPU's?

I wrote in a while back about the problem with it. When I plugged it in it would beep 3 times and not boot up. I changed the RAM and I get no beeps anymore but it still will not boot up. I have a motherboard and 4 different CPU's but I don't know which one will work with the motherboard. I need to see if someone can help me on that. The on that its going in is a Gateway Windows XP The motherboard is from 2000 but it has never been opened or out of the box. I can't get anyone to help explain to me in English on how to know what kind of mobo to get that I can understand. They just keep going off in the big computer talk and I have no idea what they are saying so they don't want to take the time to help me so I need to try and put this one in it. Now I need to see if you guys can help me. Here's the info on the one it going into. Gateway Windows XP Model # MF ATXSTL KTH 300SE LTD Kittyhawk # AA AS1507-805 Motherboard Date 4/02 Here's what I have; MU440EX Motherboard for Intel Pentium 2 & Celeron Processors Intergrated with AGP Graphics and PCI Audio BOXMU440EX AA 702993-403 IUMU82112710 Date 2000 1.) Intel Celeron Processor 466MHz Processor Core Speed 128KB Cache fan heatsink version # 737834-001 MM # 822441 66MHz system bus 128KB L2 Cache Duel Independent Bus Architecture MMX Media Enhancment Technology Date # 5/99 2.) Pentium Processor with MMX Technology 233MHz W / MMX Item # 0323009 MFG# BOXBP80503233 MM # 813082 FPO# L7421952 Date 11/97 3.) AMD ATHLON Processor 650MHz 200MHz system bus 128KB High Performance L1 Cache super Floating Point Unit I also have two cards that I don't know what they are for; Intel Celoron 6910161 79080161-0754 09190358 SL39Z 400/66 Costa Rica B121 Intel Celoron 6910162 79080161-0545 09190358 SL39Z 400/66 Costa Rica B121 4324 Ethernet Card RJ-45 P/N 63H2449 ASSY; SB0110240-01N 9/22/04 Intel 109X1512A2036 Sanyo Denki 600/512/100 2.0V SI 99290661-0267 Malay '98 SL3JT This is what I have and if someone could help me with what will work with what and what will not work with what. I have been trying to get this thing going for about three months now. Also if any of these do work together will I have to do anything with the BIOS. If anyone knows of any video and/or step by step instructions on this please let me know. Thank you to all for any help.

Question by madrasi    |  last reply


Acer laptop, what mother board does it use?

 I have a acer aspire 5542, And would like to know the mother broad it uses Thanks for your help Brand Acer Model Aspire 5542 Operating system Windows 7 Home Premium 64 Bit Processor / Graphics AMD Athlon II Dual-Core M300 2.00 GHz ATI Mobility Radeon HD 4200 Series Memory 4 GB Dual-Channel DDR2 SDRAM 667 MHz Hard drive SATA 500 GB HDD 5400 rpm Display / Resolution 15.6-inch HD 1366×76 resolution high brightness Acer CineCrystal TFT LCD, 16:9 aspect ratio, 8 ms response time, 60% color gamut Removable Storage 8X DVD-Super Multi double-layer drive Wireless Support Atheros AR5B93 Wireless Network Adapter 802.11 n, b, g Communications Broadcom NetLink Gigabit Ethernet, HDAUDIO Soft Fax Modem with SmartCP, Acer Video Conferencing with Integrated Acer Crystal Eye Webcamer featuring 640×480 resolution, Bluetooth 2.1 Input Devices Full-size keyboard including number pad, Synaptics touchpad with Multi-Gesture support Power 6-cell Li-ion with up to 3 hours of battery life Accessories Extra battery, external USB floppy, extra AC adapter Security software/features Acer Backup Manager1, Acer Bio-Protection1, Acer eRecovery Management, McAfee® Internet Security Suite 2009 Trial, MyWinLocker®, Nortonâ„¢ Online Backup Other Software Acer Arcadeâ„¢ Deluxe featuring Acer CinemaVisionâ„¢ and Acer ClearVisionâ„¢ technologies, Acer Crystal Eye, Acer GridVistaâ„¢, Acer Launch Manager, Adobe® Flash® Player, Adobe® Reader®, EarthLink®1, eSobiâ„¢, Google Toolbarâ„¢, Microsoft® Works with Office Home and Student 2007 Trial, NetZero®, NTI Media Makerâ„¢, Oberon GameZone, WildTangent® Memory card reader Media Card Reader supporting SD, MMC, RS-MMC, MS, MS Pro, xD Accessible memory slots 2 slots Maximum Memory Expansion Up to 4 GB Ports Headphone/speaker/line-out jack with S/PDIF support, Microphone-in jack, Line-In jack, Ethernet (RJ-45) port, Modem (RJ-11) port, DC-in jack for AC adapter Additional Ports None Audio Dolby®-optimized surround sound system with two built-in stereo speakers, Optimized 3rd Generation Dolby Home Theater® audio enhancement, featuring Dolby® Digital Live, Dolby® Pro Logic® IIx, Dolby® Headphone, Dolby® Natural Bass, Dolby® Sound Space Expander, Dolby® Audio Optimization, Dolby® High Frequency Enhancer technologies10, True 5.1-channel surround sound output High-definition audio support S/PDIF (Sony/Philips Digital Interface)11 support for digital speakers, MS-Sound compatible Built-in microphone ENERGY STAR Qualified Energy Star 5.0 Weight 6.16 lbs (2.8 kg) with battery Dimension 15.1 x 9.9 x 1.03 to 1.5 inches, 383 x 250 x 26 to 37 mm Thinness 1.03 to 15 inches, 26 to 37 mm Network Card Broadcom NetLink Gigabit Ethernet, HDAUDIO Soft Fax Modem with SmartCP PC Card Slot None Webcam Acer Crystal Eye Webcamera featuring 640×480 resolution Multimedia and Entertainment Acer Arcadeâ„¢ Deluxe featuring Acer CinemaVisionâ„¢ and Acer ClearVisionâ„¢ technologies, Acer Crystal Eye, Adobe® Flash® Player, NTI Media Makerâ„¢, Oberon GameZone, WildTangent® Warranty Limited 1-year and 90 day warranty options available depending on country, 1-year limited warranty on primary battery. Optional HP Care Pack Services extended warranty

Question by andreblue  


I need to get a server up and running!!

Hello peeps. It is me again, I have a couple questions and I'm hoping that someone pays attention to it. 1. I tried to get my p2 (pentium 2) going so I could eventually use it as a media server/download server (it is fast when you get a few hundred mb of ram and 80 gig hd in there at 467mhz). Well it seems to have a habbit of rebooting itself when you think "aww I can relax now, I have windows installed and everything setup" then it "BOOSH" restarts and comes up with a lovely lovely lovely (I could go on like this seeing as I've reinstalled windows xp on here 10+ times, yes I sit in the corner from time to time and just shiver) error: System Disk Error, press ctrl+alt+del (never could find that key..). Somehow this clever ass machine has found a way to corrupt it's own partition. I have ram for it that once did work in there too, but now when I put it in now, it doesn't boot, hangs and beeps. So should I just trade it for another (I know a guy that runs a comp shop with quite a few oldies laying around, perhaps I could score a p3) or is there something I can do to get it up again, my parents paid around $2000 for it when it came out (apparently 32mb ram, 4mb agp card, 6 gig hd) is top of the line in 1999 :-/ ) and I wan't to "whip" a few more tb of data out of it. That being said,..on to the next question 2. I just upgraded/installed new software for my ibm thinkpad r51. Medly little ibm has all it's own network utilities and whatnot (but when you don't use it, it's hell frozen over). Well before the upgrading (just like upgrading software from say 3.5 to 4.1 or the such) I could see the ibm from my ibook g4, and share files, but it was nearly 1 way as the thinkpad couldn't see the mac for some ungodly reason. After install, nothing at all. I'm rather annoyed and having read article after article of documentation for microsoft and other sites, it seems as simple as just being connected to the same AP (yes I'm using wireless and btw, my router doesn't support cross networkings, so I can't share between wireless computers and those on ethernet, not a big problem so I'll move on)... and have them all on the same workgroup, which even if they aren't you're supposed to still be able to network and it appears to be just as simple as that. Apparently not. Why can't my windows pc's see each other on the wireless and I can't even see the thinkpad on my ibook anymore. One more people 3. I decided to hook my other desktop machine (Athlon xp 1800+), but unfortunatly it has a fan the size of my foot and a 8000rpm fan attached to it, while it keeps it almost down to 20 C, it makes so much noise you can hear it anywhere in the house, could I put a control knob or the such in line? Thanks for your help if anyone chooses to be a big help and give me a hand with a few things and I promise I won't bug again. I just have had these few things I need to fix for such a long time but no one wants to help me, I'll admit, it's not something anyone really wants to get into,..networking and whatnot, but if someone can just sit down with me, possibly on msn so I can try things out basically in real time, then I would be forever greatfull. -Punkguyta

Topic by Punkguyta    |  last reply


My network is really screwed up

I seem to be fighting a loosing battle with my network, things just never work like they're supposed to.For example, sometimes I have to reinstall my network printer on both my laptop and my ibook to get it to print again, even when the server has been running fine sans problems for a week, it will randomly do this shit.Another example is, right now I "was" just trying to copy some music over to an external firewire drive on my server that I have shared. I had the permissions on everyone set to full access yesturday but I noticed when I restarted my server, it did not detect my drive properly until I re-seated the firewire cable :S Thusly somehow it lost my share configuration for my music folder.I set it up, but this time I left it on read only because I wasn't planning on adding any music earlier, itunes and everything was working fine when i mounted the volume. I went on there and changed the permissions back to full access just 20 minutes ago as I wanted to add some music to my drive, I right clicked in my mac os x explorer and made a new folder just to see if I could copy over now, it worked, aswell as deleting the folder.So I drag the 60mb folder of mp3 files over, and it just sat there...and sat...and sat.... until eventually giving me an error -36, upon searching about, it means "-36 ioErr I/O error (bummers)".That's straight from the horse's mouth, and that really tells me nothing, what exactly does "bummers" mean???It's frustrating for me non stop, and it does this to me with other shares in mac os x, or they will randomly disconnect for no reason, sometimes after 15 minutes or sometimes after 3 days. I will note too, I can't connect to my server now, it just says missing alias in the mac os finder. Yet I can VNC into it no problem, wowa, but just upon checking my pc just now, it can't access any shares on it either, the cursour is just spinning, however I usually have no problems with my pc's accessing it, other than the printer thing.I'm just so god damned frustrated with my set up, I've looked it up and down until I was exhausted, several times, and I know I must be missing somewhere along the way, but I just can't understand how it doesn't work like I want it to. Shares are set up, firewire is out of the question, permissions set up, mac os x can log into server, check. It's all good until I actually go to use it for something when I really need it.I'll have to restart my server now to get it to work properly again...it was fine until I vnc'd into it to change the permissions, im gonna try restarting it now and just access it from it's own screen, perhaps vnc has something to do with it.Oh and to clear up any questions before they're asked, this is how I have it configured, as quickly and detailed as I can explain it:My network starts at my ADSL +2 4 port router/modem thingy (Speedtouch 546, it has it's own connection issues on the isp's side, but they don't seem impact LAN side data flow)That then gets split off to:*Port 1: iBook G4*Port 2: 25 ft. cable to 8 port switch (I'll explain that a little further down)*Port 3: 50 ft. cable to apple airport basestation in livingroom for wifi*Port 4: My main AMD PcMy ibook is configured for DHCP with manual address 192.168.1.64The switch just makes the modem think I have like 5 computers hooked into one port lol...My airport, for a long time I thought was perfectly fine as far as usuage with my thinkpad, however, I've been noticing the last few times it's powered on, the airport connects to the thinkpad, but assigns it a 169.xxx.xxx.xx address which does not exist on my network, but if I turn the wifi off and back on, it connects fine and assigns it a dynamic ip on my 192.168.1.xxx network.Other than that, I have it in bridge mode so that it acts pretty much the same as if the laptop were wired via ethernet, vnc, filetransfers, and online games all work good albeit the wireless delay, still not bad in VNC however.My AMD machine is set up for static ip at 192.168.1.66Switch:Port 2 of my modem goes to port 8 (uplink) of my switch.*Port 1: My server (Configured for static ip at 192.168.1.65)The rest are just my B&W; g3 setup for static ip at 192.168.1.68 and an old P2 I believe is at .69 and a 1.5 amd athlon aswell setup on 192.168.1.71, all of those in no particular order except I made sure my server stays on port 1.I did have everything setup so my server was on port 2 of my modem all by itself, but I needed the switch over by my server so I moved it, however, I was still having these problems before hand, even when my server was running on a completely different motherboard!Also, maybe could someone tell me why my server won't boot unless I have a bootable disk in the drive (IE: my windows 2003 server install disk), just so it goes to "press any key to boot cd.......", of course I don't push any key, and it continues to boot into windows.However, if I dare start my server without that disc in there, it simply goes to "Invalid System Disk error, insert correct/valid disk (can't remember it word for word), and push enter"I've tried reinstalling windows server 03, and same deal, yet it's using the same hard disk for the OS that my previous motherboard used and booted from not a problem.I really apologize for the long post... but I've quite literally burnt myself out and lost all motivation with continuing to expand my computer network and so I figured I would ask for help on here for one last resort, but I know many people probably won't read it due to the long post, but I have a lot of problems I don't have answers for and I need to explain myself somewhat thoroughly or else I won't find the proper solution for the problem, now will I?

Topic by Punkguyta