Bearings?

I'm looking at the VXB.com web site and can anyone tell me if the bearings are a fiber casting outside or a full metal bearing. Better yet does anyone have the part or kit number. I spoke with a sales rep and she asked if I needed a fiber outside or full metal bearing.

Question by captain727   |  last reply


The Bears :-(.

Ok, this is a forum topic for Chicago Bears fans (and really, all sports fans). Who thinks that the Chicago Bears are the most depressing team to be a fan of? I just got done watching the Bears/Falcons game. That was depressing. They had their chance to come back... and they blew it! Oh well, there's always next week.

Topic by Gjdj3   |  last reply


bearing to shaft

How would I secure a 1/4" id bearing to a 1/4"shaft? The bearing slides on very easily and is a little sloppy. I bought these from a supply co. thinking a 1/4" id bearing would fit properly on a 1/4"shaft. Any one have and ideas?

Topic by ecafighter   |  last reply


Ball Bearings

Does anyone know where I can buy metal ball bearings? I'm thinking of looking in Home-Depo or Lowes but I don't know which section to look in. Oh,and how much do they cost? I'm planing to buy one with a half inch diameter. Thanks

Topic by IlluminatedAntichrist   |  last reply


Joyful teddy Bear

Trying to make the Joyful bear and I'm having problems with putting the legs together. Is there a better tutorial for making this bear ? Please help Thank you Sherri

Topic by Sherri54   |  last reply


Teddy Bear Phone

A buddy of mine e-mailed me an article about a cell phone unveiled in Japan that is a plush Teddy Bear. After reading it I said "Surely someone could make that for less than $500!!!" When I mentioned this to my friend he said he could see someone on Instructables combinig it with taxidermy to make a rat phone. The URL is :http://www.foxnews.com/story/0,2933,415965,00.htmlHopefully this will provide someone with inspiration.

Topic by RadBear 


Gummi Bear Chandelier

So basically an artist named YaYa Chow (cool name) made a chandelier by stringing gummi bears together....The resulting effect is actually very good, The various shades give out a nice colour.But i'm wondering : How many did she eat in the process ?LINK

Topic by =SMART=   |  last reply


The Right to Bear Arms

UPDATE! I FIXED THE VIDEO. SORRY!!!! The new link has the video I originally tried to link to. SORRY!The U.S. Supreme Court recently passed a 5-4 ruling over turning D.C.'s handgun ban and delivered their interpretation of the 2nd Amendment.I've been waiting to link to this for a long time! Family Guy is awesome. The link takes you to a clip from Family Guy that expresses my view on the 2nd Amendment.NEW, Not bad LINK

Topic by Gjdj3   |  last reply


Load Bearing Wall??

How does one best determine whether a wall is load bearing?

Topic by Toga_Dan   |  last reply


skateboard bearing lubrication?

Can i use gear oil on my bearings for my skateboard?the oil is thick 80w 90 thanks.

Question by sharlston   |  last reply


magnetic ball bearings

How do  magnetize my own ball bearings for making magnetized Fullerine geometry? Sorry cant find the right word for it, i'm obviously scientificaly challenged.

Topic by craftyv   |  last reply


Bearing/fulcrum for a pendulum

I want to swing a locket on a chain like a pendulum and I want to minmise the friction experienced where the chain attaches to the supporting post. What sort of bearing or similar device should I use for this? Ideally it should be available in a bronze/dirty brass colour but I guess I can deal with it if it isn't.

Topic by THX 1138   |  last reply


What sort of Bearings are this ?

Hello, Im trying to see if I can find a replacement bearings so I can try out a larger / better wheel on my knee walker mobility device that has 8 mm bore as opposed to the 7 mm i have now. However after searching the web im still not exactly sure what type I have in order to find a replacement . You can see the bearings below in my photos . http://www.flickr.com/photos/28633046@N02/ ( sorry no zoom in lens ) Any one have any ideas as to what is , and if not what options i have to replace them ? thanks helena

Topic by hele   |  last reply


I return bearing...

...a semi auto! Basically, its based off a mod i made of the semi auto oodalumps has.

Topic by HBF   |  last reply


Low friction "bearings"

For several of my projects I required some sort of bearing that would not only allow for a minimised free play but also very low friction.Before you get too exited: This is not a new type of bearing or anthing for heavy duty loads, not even for ongoing use without servicing.I found that even slightly heavier things rotated on makishift bearing far easier if the axle was verticall instead of horizontally.This gave me the idea to try a simple needle-bearing approach.This is how it goes:1. Grind and polish your axle to get a nice needle point - it must be perfectly centered!I prefer to do this with the axle in a fast spinning drill on a fine grinder.The polishing in a simlilar way, but please do not try it with a cloth in your hand on a spinning axle!2. The other part of the bearing is a screw or pin with a punch mark.I grinded and polished a punch for this so it has an angle of 60° and polished it to a mirror finnish.If alignment is of importance then of course the pin/screw must work for this purpose!If in doubt make it spind an use a pencil to get the true center.A drop of sewing machine oil and it spins nice and with very little friction.The key is to adjust the gap(s) between axle and punch mark to next to nothing.You don't want any pressure along the axle as you would "drill" a hole into your mounts.And you don't want it too loose to avoid wobble.I hope it might give you an idea for your next project.

Topic by Downunder35m 


Professional Teddy Bear Seamstress

I need a professional Teddy Bear seamstress to create a bear with my fabric Thank u

Topic by Jo44   |  last reply



i made a scare bear for some one and i need a fun story for his past, Help? Answered

I made a scare bear for some one and his birthday is tomorrow (friday) can someone think of any creative storys for him? (the bear) thanks!!

Question by popcorn4lunch   |  last reply


Teddy bear pattern out of army material? wanting for daughter before he deploys :-(

Hi,  I'm wanting to make 2 smallish teddy bears  one for my daughter out of her dads old army shirt and another for my husband out of daughters old sleepsuit, I cant seem to find a pattern anywhere, I ideally want a hand sewn pattern that's fairly simple as never made one before, if anyone could help me it would be greatly appreciated as wanting to make them for each other so they  can have while he's away on tour x

Topic by aysmith   |  last reply


how are fluid bearings made?

I was looking at fluid filled bearings and wanted to try and make one i just cant understand how they are filled and how they can rotate without leaking any ideas on how they are sealed?

Question by sharlston   |  last reply


Proper way to "mount" a bearing?

I'm not really sure on the proper way to mount a bearing. I had a few ideas on how to do so, but I want to know what your methods are, or which of mine are the best. Images are attached. In most of these methods, there's a little collar on the bearing. I didn't discover till recently that most bearings don't have those.

Topic by cvxdes   |  last reply


will someone make a roller bearing?

I had this idea to make a model roller bearing by getting two pieces of pipe,when slotted into each other theres a 1cm gape at each side and corners then slot 1cm dowel inside the gap i dont think it will wok plz someone make it

Topic by sharlston   |  last reply


Giant Gummy bear...on a stick

Woohoo! Who doesn't want half a pound of giant gummy bear on a stick goodness?? They're "Hand made (with gloves on) in the US". For a mere $ 9.95, you can have the equivalent of 88 gummy bears - on a stick.Comes in green, red and blue.The history of the giant gummies is explained in teh awesome video, showing these little guys for what they really are: manna from gummy bear heaven! They're mounted on a "portability beam", otherwise known as a stick. Getting hungry? Go get one!Did I mention it's a gummy bear on a stick? No, this is not an ad. I just love the idea of a giant gummy bear on a stick...

Topic by Lithium Rain   |  last reply


What to do with Ball Bearings?

For some while I've had a pile of ball bearings sitting here on my lounge room table, and without knowing what on earth to do with them, I now ask you. I have found uses such as adding to my "mousetrap racer," a small car, run by a mouse trap, that can go up to 15 metres. With ball bearings it goes twice as far as it used to, so I have become curious... what to do now though? All ideas would help, and an instructable would be even better. Cheers

Topic by Kryptonite   |  last reply


Another Baby Bear knife

I found some more metal and decided to make a third Baby Bear knife. Thanks to Alan Folts for the original design. He sells these now and I did not like the price, so I decided to make my own. Here is a picture of the semi-finished knife. It has curly(flame) maple handles that I found in the wood pile. I would like to make a Kydex sheath for it, but have not found a source that will let me buy a few or one sheet  at a good price. Still looking. Anyone know of a good source please let me know. I only need a few sheets to start with. Carbon graphite looks cool.

Topic by triumphman   |  last reply


What to do with a giant teddy bear??

Today at a thrift store I scored a giant 3 foot teddy bear for 4 bucks. I want to do something fun with it, my first idea is to take out the stuffing, extend the legs, and make it into a costume, since bear suits run really expensive. Any other ideas or further thought?

Question by masterbuilder   |  last reply


A gun with bizzarre ammo

Hello people of Instructables.com. http://gizmodo.com/171236/teddy-bear-gun This particular toy stuck me as an awesome toy to have around. However, there doesn't seem to be any place on the world wide web that sells this magnificent toy. Perhaps someone with some skill in projectile launching toys can show me how to make one of my own using a Life Water bottle?

Topic by Clover_Goldngreen   |  last reply


Funny videos

Post any videos you find or make such as:

Topic by adamsdead   |  last reply



ball bearing longboard sliding gloves!!!!

Someone please make some gloves wth bearings in them for longboard sliding!!!!!

Topic by Zaphod Beeblebrox   |  last reply


do I need to grease these bearings? Answered

I ordered these bearings from mcmaster to use in my new electric bike that i'm building for my senior project, but they spin really easily and im not sure wheather or not im supposed to grease them. and if I am, what kind of grease would be best? http://www.mcmaster.com/#ball-and-roller-bearings/=b15r5n

Question by the mechanical engineer   |  last reply


Is their a substitution for ball bearings in K'Nex guns? Answered

EDIT: I mean as in the true triggers and such

Question by IgnorantZebra   |  last reply


Difference between a 608zz and 608 bearing?

I have started the swap to go to this extruder on my 3D printer. As such, I am taking the time to go ahead and use new bearings. I have a set of eight that came from a [one week old] skateboard someone broke, but they are 608zz. The BOM of the extruder calls for 608. From what I can see, the only difference is that the 608zz have a plate that covers the ball bearings, versus 608 which appear to be open. Is this true? and if not, what is the difference? Can I use the two interchangeable? thanks in advance! 

Question by DoctorWoo   |  last reply


Guys and gals, please bear with me.....

Those of you who know me well know I have been having a difficult time of late with things "locally", and recently things have come to a bit of a head.  So, as I appear and disappear, from time to time, I ask your forbearance in taking some of my comments with a grain of salt as I work things out in "my little world".    I AM working on a project, which I hope I can finish and finish researching how to USE it properly, within a week or two.   Hopefully this will help me out of the slump like hole I have fallen into. Sana medicus audire me ¡ UPDATE !   Slowly I turn.....Scared and sacred are spelled with the same letters. Awful proceeds from the same root word as awesome. Terrify and terrific. Every negative experience holds the seed of transformation. - Alan Cohen

Topic by Goodhart   |  last reply


Bottle Cap Beads

Ok....  I have literally exhausted every avenue I can.  All I can find are already done bottle cap beads and their finished jewelry.  NO WHERE have I found the instructions on how to actually make the beads themselves.  I need help.  This is driving me INSANE!  Basically you take to bottle caps(and MAYBE you round em out with a ball peen hammer)  Then you weld? glue? them together and drill holes thru them.  I have hundreds and hundreds of bottle caps for this project.  All I need are the instructions to do this project.  I am begging anyone out there who knows of, or has made these please, please...  Write me here, communicate with me telepathically....  Something..  Anything!  I am begging my fellow Instructians for assistance! Thank you in advance!! Johana P.S.  I am posting a picture of what the finished things look like.  Some have the wavy edges and some don't   I don't care if they have one of the other.  I just need to make these guys!!

Topic by JosiePosie76   |  last reply



how to grease skateboard bearings with metal shields?

I have a couple of abec 5 bearings and i tryed to grease them but i couldnt remove the metal shield withou t damaging it anyone know how to do it correctly?

Question by sharlston   |  last reply


Drunky Bears 2.0 Need flavor ideas?

So I am planning on doing another Drunky Bear Experiment, however I need a few more flavor ideas before I get started and my brain is tapped so any suggestions would be greatly appreciated

Question by Smayes777   |  last reply


ESPN™Chicago Bears vs Green Bay Packers live Streaming NFL week9 Watch Online FrEE

Watch NFL Match Chicago Bears vs Green Bay Packers live stream NFL Pro Football Week 9 online TV on PC. Enjoy Chicago Bears vs Green Bay Packers live stream Free NFL Game Online HD on your Pc, worldwide broadcasting tv coverage, highlights, preview, start-time, p2p feed, kick-offs.Watch live NFL Football, NFL Pro Football Week 9, NFL Professional Football Week 9 online.Enjoy NFL Football Full Season on FOX,CBS,NBC,ESPN,NFL Network live online. Click Here To Watch Live NFL Football 2013-14 Chicago Bears vs Green Bay Packers live Streaming Link Chicago Bears vs Green Bay Packers live Stream Link1    Link2 MATCH DETAILS NFL Pro Football Week 9: Competition: NFL Pro Football 2013-14 DATE: Monday November 4, 2013 Kick-off Time: 01:00 pm ET Live / Repeat: Live* Channel: NFLN Don’t worry,it is too easy to watch.just try it. Chicago Bears vs Green Bay Packers live streaming tv, preview Chicago Bears vs Green Bay Packers live, live highlights Chicago Bears vs Green Bay Packers American football, American football Chicago Bears vs Green Bay Packers live, watch Chicago Bears vs Green Bay Packers live free, Chicago Bears vs Green Bay Packers live Feed, Chicago Bears vs Green Bay Packers live video, Chicago Bears vs Green Bay Packers live coverage, Chicago Bears vs Green Bay Packers live nfl game, Chicago Bears vs Green Bay Packers live football match, Chicago Bears vs Green Bay Packers live match video, sop cast Chicago Bears vs Green Bay Packers live, web cast Chicago Bears vs Green Bay Packers live, streaming tv Chicago Bears vs Green Bay Packers live, enjoy Chicago Bears vs Green Bay Packers live football, NFL Chicago Bears vs Green Bay Packers live, Chicago Bears vs Green Bay Packers live 2013, Chicago Bears vs Green Bay Packers live pc tv. Click Here Chicago Bears vs Green Bay Packers Live

Question by ahabllvh   |  last reply


What's the most low tech way to make wooden bearing balls for a wooden ball bearing?

Last century I read an auto-biography by a back-to-nature man who needed to transmit power from a stream paddle wheel to his cabin by belts.  He said the hardest part was making a ball bearing.  He carved the balls out of oak with a knife and roasted them brown near a fire.  These lasted a long time.  How did he do that -- or how could he have done it using low tech?

Question by Tim Temple   |  last reply


How would i clean bearings from roller skates for use in a DIY CNC machine? Answered

What would get off road scum but not the grease inside the bearing EDIT: HERE IS A PICTURE of a clean one next to a dirty one

Question by bigbodysmallbrain   |  last reply


I need help? on how remove the top bearing from my dewalt DW613 --------C tpye 1 router? Answered

I have look at my router and found that the top bearing needs replacing.how do remove the bearing I think that it come out from the top,and how do I go about changing this bearing please help me 

Question by ander19   |  last reply


how to get a stuck bearing cup out?

I was taking apart my rear wheel, when I noticed the lack of bearing balls and appropriate parts. I wanted to remove the bearing so I can replace it with a new one, however when I was attempting to remove the last cup of the bearing, it is stuck in the hub. The local mechanic couldn't get it out and said I needed a whole new cassette and hub; I was hoping there was some nifty way I could remove it.

Question by  


I HAVE PROBLEM ASSOCIATED WITH ROLLER MISSING OF REVERSE GEAR BEARING WHILE ASSEMBLY WITH SHAFT IN TRANX-AXLE?

WHILE ASSEMBLY OF COUNTER SHAFT AND INPUT SHAFT REVERSE GEAR BEARING IS USED.BUT IN SOME CASES FOUND THAT ROLLER IN REVERSE GEAR BEARING IS MISSING. AND IT IS ASSEMBLED AS IT IS. I WABT TO DESIGN SOME POKA YOKE SUCH THAT BEARING CAN NOT BE PLACED IF ONE OF THE ROLLER IS NOT PRESENT. OR SOME POKA YOKE TO CHECK THE BEARING BEFOUR ASSEMBLY AND IT SHOULD CHECK ALL THE ROLLER AND IF ONE OR MORE ROLLER IS NOT PRESENT IT WILL SHOW SOME INDICATION OR ALARM.

Question by ADITYA1991   |  last reply


What are those bearings that slide over pipes callef.?

I need to slide something purpindicular to a pipe without wiggle. I have seen bearing things that the pipe goes through and the pipe moves with eaze. I just need to know where i can find them

Question by corsi   |  last reply


LOVE MESSAGE BEAR For Valentine’s Special

Your loved one will know just how you feel when they're resented with this fluffy little fellow! Adorably decked in red-and-white; between his paws he holds a heart "bear"-ing an unmistakable message. So cute! Polyester fiber.More Infohttp://www.giftforusa.com/product.asp?dept_id=19103&pfid;=37103

Topic by Rick99   |  last reply


Problem removing a glued on bearing from glass

I am a bit stuck and usually this does not happen too often :(Got a lazy Susan with two glass plates and the bearing sitting in two aluminium disks.The thing still works fine but the plates were never really centered properly.Starts to drive me nuts that it is always "wobbling"...My first attempt was to figure out if the glue might just be hot glue, so I gently heated it all up.Was a not go but didn't expect it to be that simple.Next try was to use some clay around the aluminum disk and then fill the dam with acetone to dissolve the glue.It did not even soften it a bit :(To make it complete I also tried it with Methye Ethyl Ketone as it never failed me but it seems the glue used is chemical resistant.In terms of echanic tried with a thin bladed tool but can't get it into the non existing gap between glass and aluminium.And even braided fishing line seems to fail as after about 20 minutes of trying to get in the glue I got nowhere.My last resort would now be to put it in the oven and slowly heat it up until the glue fails.Problem is that I highly doubt the Lazy Susan is meant to tolerate this and that it will crack.There is also the bearing and possible grease to consider as I have no clue yet whether or not I can take the disks apart to get to the bearing.Is there any good idea or tip that I missed that I can try before risking to heat it up?In case you wonder: The disk is about 5mm out of center...

Question by Downunder35m   |  last reply



Can I use a deep fat fryer to heat bearings to fit to a shaft?

This deep fat fryer will heat to 400deg. Do I use a veg oil,   or  compressor oil   .... someone told me this once, I don't know what oil to use that won't burn easily. A one time job  just don't want to buy a bearing heater  These bearings are 3" OD and go in a large compressor doing a rebuild on the low cost mode...

Question by anvil_man   |  last reply


How do I mount or house a Taper Bearing? Answered

I am wanting to build a lathe for turning larger projects (hollow wooden shells: up to 29" wide, about 30"-32" long, 1.5" thick all the way around). I have the motor, belts, drive wheels, etc... I just need to know what would be the best for mounting or housing a taper bearing. Would I absolutely need two of them (or more)? I am using a taper bearing because it is better for handling larger weight and stress.

Question by Sneezus   |  last reply