How would you make this?
Topic by plotseling | last reply
I recently watched Bones (it was on FOX) , and they had a computer genius who somehow killed a person, arranged a code out of the victim's spine, and carved malware onto bone, shutting off their computer system's fans. My question is this: is it possible to carve a worm/bug/virus on to bone (or anything for that matter) so that, when scanned, it wreaks havoc on computers or mainframes?
Topic by moneyfuskie935 | last reply
Hey everybody Fish Bone is live! It’s updated to show its quick release feature. I hope you think it’s cool enough to tell your friends about. Of course I’d be thrilled to have you as a backer. Thanks a million. Brent Kickstarter Link http://www.kickstarter.com/projects/699604098/fish-bone-knotless-gear-tie?ref=recently_launched
Topic by Mrballeng | last reply
I bought some flavored bones for my dog at a store and found that they are pig bones. She had blood in her stool (lots). I gave her peroxide and she threw up about 30 shards. they were sharp enough to remove a sliver from your finger. Never give you dog pork bones, EVER. I don't know everywhere they are sold but I got mine at TSC My dog is fine by the way.
Question by VICPETERS | last reply
A few weeks ago I was digging a new garden and I uncovered an old beef rib bone buried next to a rusty tin can. I presume one of my dogs put them there several years ago. The bone had developed a nice patina, infused with a reddish-brown color, most likely from the rusty can. It would work perfectly as scales (handles) for an old hunting knife of mine if I could flatten it out somewhat. Remembering an old trick from my youth, I have been soaking it in white vinegar and it has softened nicely without losing the patina. From my past experience I know it will re-harden if I allow it to dry out, but it will be more porous and brittle. My thought was to dry it then coat it liberally with super glue or to soak it in a clear acrylic paint for several days to fill the pores. I am looking for any ideas or suggestions that will help me in this project, whether they be ways to make my ideas better or something entirely different. Thanks.
Question by Burf | last reply
Question by dse | last reply
Ok so the Beagle Board can run Windows Compact, and Linux and stuff right? Well I've been looking up descriptions for the Beagle Bone, and I'm not sure if it can do the same thing. I want to make a wrist-computer thing, but the Beagle Board is to big and a bit on the expensive side. The Beagle Bone would be an ideal replacement, but I'm not sure if I have the same capabilities as I do the Beagle Board. Can someone tell me if the Beagle Bone can run Windows Compact or a small OS like Linux?
Question by Adum24 | last reply
Well, i got a 2-d drawing of a man. lats say here it is: http://images.fanpop.com/images/image_uploads/old-man-simpson--the-simpsons-553865_467_509.jpgso i want to create bones for it. there:http://img525.imageshack.us/img525/3001/oldmansimpsonthesimpson.jpgso now i want to move the bones and get the character moving. like in pivot.( http://en.wikipedia.org/wiki/Pivot_Stickfigure_Animator )how can i get it going? using a software or something.
Question by netbus | last reply
So when I was a kid I found this nice rack of white tail deer antlers, 8 points. Moved out of my mom's house and forgot about it, but recently they resurfaced. I'm thinking it would be really cool to wear them for Halloween.. I've done a lot of battle with search engines for the past few days but it doesn't seem like anyone uses shed antlers for anything terribly interesting. Much light-fixture-ing and car key racks abound. And the guy who made a USB key casing. Does anyone have any ideas on how to wear them such that they look about as natural as a human suddenly having horns could be? I'm not bald, so that's not an issue, but I don't have access to a lot of tools since I'm still getting started.
Question by PikeMinnow | last reply
I want to make a ballistics gel dummy to test assorted weapons from video games on. Like pipe wrenches, crowbars, hammers, and kitchen knives. To do this I want realistic fake bones and organs to simulate the damage the weapons would cause to those. How would I make them?
Topic by creepy0000 | last reply
Hello! :) I am hoping someone can help me. I carve faux claws, fangs,and bone rings. There are times I wish I could soften the bone, as when carving a claw from a rib bone, It would be nicer if I could remove the marrow , soften the bone and bring the 2 curved ends together, or when making rings using sections cut from a thigh bone, I end up with piece's that are odd shaped and too thin walled to carve out room for a finger. If I could find a way to soften the bone i could squeeze the bone some to get a usable round shape ,(after bracing and letting dry.), and I would have more usable maternal I remember when I was growing up, we were up in the villages and a VISTA volunteer came for the summer. He had in his room a bone in a bottle, not soft, but hard , no cuts in the bottle . Us kids tried to figure out how he got it in there as the bone was a little bigger than the opening. Before he left he finally told us he had soaked the bone so it was pliable and able to fit through the smaller opening, once inside it went back to it's shape and dried hard again. For the life of me I can't remember what it was he soaked it in. If anyone knows, or has a idea , it would be greatly appreciated if you would let me know. Have a great day, or night ( I know I spend hours here when I can't sleep and am "Night owling". lol ). I love this place!! :) :) Leo4613 :)
Topic by Leo4613 | last reply
Did anyone watch the Military bone yard episode on the History channel? It is amazing to see how they can repair a vehicle that is in as bad of shape as it was and make it like new again. On the other hand, I could not believe what they do with equipment that is outdated or too much work to rapair.M16 being tossed into grinders Vietnam and WW2 era tanks smelted down into a hunk of metal. Amazing pieces of engineering destroyed along with its history. All because of the idiots in Washington who want to keep this stuff away from the public. The episode pained me so much, that I could not watch the rest of it.
Topic by Sedgewick17 | last reply
I found this in the black sea, and I have no idea what it is. It feels kind of like a bone, is a bit thicker than 3 peices of paper towards the wide end, and has a hollow tunnel going through from the small end and opens out in the wide end (see diagram). If anyone has any ideas, please tell me.
Question by KentuckySam | last reply
I just unpacked a pair of Fishbones , my reward for backing Mr Balleng's Kickstarter project. They are now hanging from my keyring. Yay! UPDATE Another parcel arrived with the rest of my reward - more Fishbones, a Snapper and a Pirana. Triple Yay!
Topic by Kiteman | last reply
I have a ram skull which I found & defleshed. It's pretty incredible - the horns span almost 3 feet. But their sheen is pretty blah. When wet they have a gorgeous rich color - is it possible to make this color come out when dry?
Question by r.effuse | last reply
I would like to use whether six AA or one 9Volt external battery for a diy "bare-bone" arduino* (*just the 328p atmega, 8MHz oscilator, capacitors, resitor, LED) & tested LM317, LD1086, LM1117 voltage regulators (it's a "budget" project – hence didn't try any step-up/step-down switching regulators though they seem to be the best solution ...); ------------------------------------------------------------------------------------------ SUITABLE POWER/CURRENT? can i "simply connect" any of the regulators (incl. the necessary resistors/capacitors according to their datasheets) or do i need to add resistors to reduce their current in order to not "over-power"* them? * according to the values i measured (i am a novice to arduino's power management … could have made mistakes whilst measuring) LM317 = ca. 2A @ ca. 3.3V with 100 & 160 Ohm resistors LD1086 = ca. 1A @ ca. 3.3V with 100 & 160 Ohm resistors LM1117 = ca. 1A @ ca. 3.3V without resistors according to dataheets/descriptions of several arduino boards (but i might have misunderstood – this might not have any impact on the power source … ) ------------------------------------------------------------------------------------------ TRYING TO PROTECT & REDUCE POWER FOR ADDITIONAL FEATURES ... LED to indicate that there is power flowing … hoping that this reduces the power consumption: - a 20 KOhm pullUp resistor ? Protect from charge … hoping that this protects the circuit from capacitors' stored charge: - 2* 1N4001 on voltage regulator? ------------------------------------------------------------------------------------------ i look forward to your advice …
Question by marc_is_curious | last reply
Does anybody view the show BONES of our group?
Topic by Goodhart | last reply
The type that fit behind the ears. My son has hearing issues and the hearing aids don't seem to cut it. He cannot hear the lower frequencies but he seems to respond to vibrations as from quality headphones. I would like to try bone induction with the hearing aids. Thanks in advance.
Question | last reply
Question by dse | last reply
Bone conduction is awesome, but there aren't any instructables. A little help please?
Question by scramjet13 | last reply
I have two small pork rib bones ( about four cm each max.) and, on a whim, have decided to whiten them. I don't know how to do this. The bones almost no meat on them, but I'm not sure whether or not they have marrow. I was thinking of boiling them, since I belive it is easy, are there any setbacks to this method? please help (note: I am thinking of trying scrimshaw on them, so I dont want to weaken the bone)
Question by flamesami | last reply
I want to measure a very tiny gap of about 20-30 microns(0.02-0.03 mm) using a sensor with the help of arduino and then display it using a 16x2 Digital LCD Display. Can someone help me out with the sensor that I will need for this purpose with exact name and its working.The gap that I want to measure is the gap between the the joints of a healing fractured bone.(the joint where the tissues develop to join the broken parts together.)Since this is a leg bone any person walking with such a fractured bone will put pressure on the bone and the gap present in the bone will reduce. So that is what I want to measure using a sensor and arduino. Since this gap will be too small (20-30 microns) I am unable to find a suitable sensor for the same.PS: Main issue I am facing is the measurement of gap using a sensor and arduino since I can find a suitable sensor for the same.Please find the attachments of the bone and the gap I want to measure.Also the thing I am doing is a close case of greenstick fracture. refer to the attachment of greenstick fracture.
Topic by ChinmayV2
Last year I posted an instructable on making ornaments out of turkey neck bones. One of the comments was less than glowing. This is mentioned today in an article in WSJ. See "When a turkey's gone..." front page. Sharon Hauser (SharonH)
Topic by SharonH | last reply
Hi, I am a researcher and I am interested in the piezoelectric qualities of certain materials, specifically quartz or bone and wondered whether anyone had experience of passing sound through quartz/crystals/animal bones? Is it possible to use one of those material to carry sound? I know that glass windows can be used as large bone conducting speakers, just wondering if anyone has any experience of this? I haven't done any hands on experiments myself as I am still at the research stage. Any advice would be appreciated and a big help! Thanks
Question by Maudiema | last reply
This new kayak has a seat, foot pegs, and cup holder. I would like ideas for installing a glove compartment container (similar to what a car has) inside of boat to hold personal protection items carried during my nature paddles on calm lakes & rivers. I have purchased a deck rigging kit, but have not decided on layout yet. What ingenious suggestions do YOU have?
Question by robynky | last reply
Is it possible to inhale adeno associated viruses full of genes i want in my bloodstream, without affecting my lungs? Also, if i want a constant supply of altered red blood cells, can I inject AAV into bone marrow and have my red blood cells replenished with mutant ones?
Question by supergeek1218 | last reply
I'm having some trouble deciding whether to buy a bare bone kit computer for less and build it, or buy a more expensive pre-built one.Here's one of TigerDirect's bare bone kits-http://www.tigerdirect.com/applications/searchtools/item-details.asp?EdpNo=3825393I like this one but the main problem is that I'm worried i will get all the connections messed up (serial cables, pin connectors, etc.) But it is about $100 less than this pre-built one belowhttp://www.bestbuy.com/site/olspage.jsp?skuId=8885575&type;=product&id;=1212192194316So here's the whole thing in short- the bare bone kit computer i might screw up, but it is a lot less than a pre-built one (I'll probably trust the pre-built one more).Please help me decide which one.
Topic by Caveman477 | last reply
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ Full combination list : +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1.Potion = Blue Mushroom + Herb 2.Mega Potion = Potion(1)+ Honey 3.Nutrients = Blue Mushroom + Godbug 4.Mega Nutrients = Nutrients(3)+ Honey 5.Antidote = Antidote Herb + Blue Mushroom 6.Herbal Medicine = Cactus Flower + Bitterbug 7.Max Potion = Mega Nutrients(4)+ Dragon Toadstool 8.Ancient Potion = Imunizer(10)+ Kelbi Horn 9.Catalyst=Bitterbug+Honey 10.Imunizer=Catalyst(9)+Dragon Toadstool 11.Power Juice=Catalyst(9)+Rare Steak 12.Mega Juice = Power Extract + Well Done Steak 13.Demondrug = Catalyst(9)+ Power Seed 14.Mega Demondrug = Pale Extract + Demondrug(13) 15.Armourskin = Catalyst(9)+ Armour Seed 16.Mega Armourskin = Pale Extract + Armourskin(15) 17.Poisoned Meat = Raw Meat + Toadstool 18.Tainted Meat = Raw Meat + Stunshroom 19.Drugged Meat = Raw Meat + Sleep Herb 20.Bomb Material = Stone + Sap Plant 21.Smoke Bomb = Bomb Material(20)+ Ivy 22.Flash Bomb = Bomb Material(20)+ Flashbug 23.Dung Bomg = Bomb Material(20)+ Dung 24.Paintball = Paintberry + Sap Plant 25.Gunpowder = Nitroshroom + Fire Herb 26.Small Barrel Bomb = Small Barrel + Fire Herb 27.Large Barrel Bomb = Large Barrel + Gunpowder(25) 28.Sonic Bomb = Gunpowder(25)+ Screamer 29.Net = Spiderweb + Ivy 30.Pitfall Trap = Net(29)+ Trap Tool 31.Tuna Bait = Worm + Yambug 32.Arrowana Bait = Cricket + Bughopper 33.Goldenfish Bait = Firefly + Snakebee Larva 34.Antiseptic Stone = Bitterbug + Earth Crystal 35.Lifecrystals = Godbug + Wyvern Fang 36.Lifepowder = Lifecrystals(35)+ Wyvern Claw 37.Health Flute = Lifepowder(36)+ Flute 38.Antidote flute = Antiseptic stone(34)+ Flute 39.Demon Flute = Mega Demondrug(13)+ Med Monster Bone 40.Armour Flute = Mega Armourskin(15) + Med Monster Bone 41.Normal S Lv2 = Huskberry + Needleberry 42.Normal S Lv3 = Huskberry + Rumblefish 43.Pierce S Lv1 = Huskberry + Velociprey Fang 44.Pierce S Lv2 = Huskberry + Pin Tuna 45.Pierce S Lv3 = Sm Bone Husk + Pin Tuna 46.Pellet S Lv1 = Huskberry + Scatternut 47.Pellet S Lv2 = Huskberry + Wyvern Fang 48.Pellet S Lv3 = Sm Bone Husk + Wyvern Fang 49.Crag S Lv1 = Huskberry + Burst Arrowana 50.Crag S Lv2 = Sm Bone Husk + Burst Arrowana 51.Crag S Lv3 = Lg Bone Husk + Bomb Arrowana 52.Clust S Lv1 = Huskberry + Bomberry 53.Clust S Lv2 = Sm Bone Husk + Wyvern Claw 54.Clust S Lv3 = Lg Bone Husk + Scatterfish 55.Disk S = Huskberry + Disk Stone 56.Recover S Lv1 = Huskberry + Herb 57.Recover S Lv2 = Huskberry + Potion(1) 58.Poison S Lv1 = Huskberry + Toadstool 59.Poison S Lv2 = Sm Bone Husk + Ioprey Fang 60.Stun S Lv1 = Huskberry + Stunshroom 61.Stun S Lv2 = Sm Bone Husk + Genprey Fang 62.Sleep S Lv1 = Huskberry + Sleep Herb 63.Sleep S Lv2 = Sm Bone Husk + Sleepyfish 64.Paint S = Huskberry + Paintberry 65.Antidote S = Huskberry + Antidote Herb 66.Demon S= Huskberry + Power Seed 67.Armour S = Huskberry + Armour Seed 68.Dragon S = Lg Bone Husk + Dragon Seed 69.Dung S = Huskberry + Dung Now dont ask for Items combinations anymore they all are here... once i get MHF I'll add the new ones if theres some
Topic by jellybean10122
Monster Hunter Monster Forest Elder Trade List FAQ FAQ written by S-Hiryu, WorldZero.com Created on October 3, 2004 Version: 1.04 Contents 1) How to Use this Guide 2) Forest and Hills (Area 7) Alphabetical Order 3) Forest and Hills (Area 7) Order of Priority 4) Jungle (Area 5) Alphabetical Order 5) Jungle (Area 5) Order of Priority 6) Swamp (Area 1) Alphabetical Order 7) Swamp (Area 1) Order of Priority 8) Free Items 9) Contact and Copyright 1) How to Use this Guide The Forest Elder is an NPC who may be spoken with, and depending on the items in your possession, he may offer you a trade. Below is a list of each trade depending on what map you visit the Elder in. The Elder will only be in one specific area on each map. This is located in the parenthesis after the name of each map. For example, "Forest and Hills (Area 7)" means that the Elder may be found in Area 7 of the Forest and Hills map. Each map has two lists, an alphabetized list and an order of priority list. The alphabetized list is simply a list of the items given and received in alphabetical order. The item given is on the left, the item received is on the right. For example, "Gravios Carapace -> Diablos Spine" means if you have a Gravios Carapace in your possession and speak to the Elder, he will offer you a Diablos Spine in return. If you possess no items the Elder wants, he will instead offer you advice. The list is alphabetized by order of the item received (item on the right). The second list for each map is the order of priority list. The Elder will always look to trade the items highest on this list first and foremost. This means if you have an Insect Husk (the item with the highest priority) he will trade you for that before he will offer to trade for the item next on the priority list. If the item next on the list is not in your possession, he will move on to the one after that, and so on. The Elder will only trade with you four times on a single quest. The Elder will always base his trades on the priority lists. The list is prioritized by order of the item given (item on the left). During certain quests, Special Mushroom trades are not available. In such situations, the Elder will instead look for Iron Ore and offer a Small Monster Bone in its place. 2) Forest and Hills (Area 7) Alphabetical Order Gravios Carapace -> Diablos Spine Garbage -> Fire Heb Pawprint Stamp -> Firefly Diablos Spine -> Gravios Carapace Fatalis' Eye -> Kirin Hide Rathian Plate -> Lao-Shan's Scale Rathalos Plate -> Lao-Shan's Shell Blos Fang -> Large Monster Bone Dragonite Ore -> Large Monster Bone Machalite Ore -> Medium Monster Bone Piscine Jaw -> Medium Monster Bone Pale Lips -> Pale Bone Kut-Ku Ear -> Plesioth Fin Kut-Ku Shell -> Plesioth Scale Cephalos Fin -> Rathalos Webbing Firestone -> Rathalos Wing Majestic Horn -> Rathalos Wing Lightcrystal -> Rathian Spike Iron Ore -> Small Monster Bone Cactus Flower -> Special Mushroom Felvine -> Special Mushroom Fire Heb -> Special Mushroom Insect Husk -> Special Mushroom Mystery Bone -> Stunshroom Gravios Head -> Vespoid Abdomen Gravios Wing -> Vespoid Abdomen Crimson Horn -> Wyvern Marrow Monoblos Spine -> Wyvern Marrow 3) Forest and Hills (Area 7) Order of Priority Insect Husk -> Special Mushroom Cactus Flower -> Special Mushroom Felvine -> Special Mushroom Fire Heb -> Special Mushroom Iron Ore -> Small Monster Bone Machalite Ore -> Medium Monster Bone Dragonite Ore -> Large Monster Bone Crimson Horn -> Wyvern Marrow Majestic Horn -> Rathalos Wing Lightcrystal -> Rathian Spike Kut-Ku Shell -> Plesioth Scale Kut-Ku Ear -> Plesioth Fin Cephalos Fin -> Rathalos Webbing Blos Fang -> Large Monster Bone Piscine Jaw -> Medium Monster Bone Diablos Spine -> Gravios Carapace Gravios Carapace -> Diablos Spine Gravios Head -> Vespoid Abdomen Gravios Wing -> Vespoid Abdomen Monoblos Spine -> Wyvern Marrow Rathian Plate -> Lao-Shan's Scale Rathalos Plate -> Lao-Shan's Shell Fatalis' Eye -> Kirin Hide Firestone -> Rathalos Wing Pale Lips -> Pale Bone Mystery Bone -> Stunshroom Garbage -> Fire Heb Pawprint Stamp -> Firefly 4) Jungle (Area 5) Alphabetical Order Wyvern Marrow -> Ancient PotionRathian Claw -> ArmorskinSleep Sac -> ArmorskinRathalos Scale -> CatalystRathian Scale -> CatalystStun Sac -> CatalystFlame Sac -> DemondrugRathalos Claw -> DemondrugRathalos Shell -> Dragon ToadstoolRathian Shell -> Dragon ToadstoolElectro Sac -> ImmunizerPoison Sac -> LifecrystalsBullfango Head -> Max PotionMosswine Head -> Max PotionMosswine Hide -> Max PotionSmall Lobstershell -> Mega ArmorskinPawprint Stamp -> Mega BugnetLarge Lobstershell -> Mega DemondrugBlos Fang -> Mega JuiceBlos Jaw -> Pale ExtractPiscine Fang -> Power ExtractGarbage -> ScreamerInsect Husk -> Special MushroomCactus Flower -> Special MushroomSushfish -> Special MushroomFire Herb -> Special MushroomMystery Bone -> ToadstoolCephalos Fin -> Twisted HornPlesioth Fin -> Twisted Horn 5) Jungle (Area 5) Order of Priority Insect Husk -> Special MushroomCactus Flower -> Special MushroomSushfish -> Special MushroomFire Herb -> Special MushroomRathalos Claw -> DemondrugRathian Claw -> ArmorskinRathalos Scale -> CatalystRathian Scale -> CatalystRathalos Shell -> Dragon ToadstoolRathian Shell -> Dragon ToadstoolPiscine Fang -> Power ExtractBlos Fang -> Mega JuiceBlos Jaw -> Pale ExtractMosswine Head -> Max PotionMosswine Hide -> Max PotionBullfango Head -> Max PotionFlame Sac -> DemondrugElectro Sac -> ImmunizerPoison Sac -> LifecrystalsStun Sac -> CatalystSleep Sac -> ArmorskinWyvern Marrow -> Ancient PotionSmall Lobstershell -> Mega ArmorskinLarge Lobstershell -> Mega DemondrugMystery Bone -> ToadstoolGarbage -> ScreamerCephalos Fin -> Twisted HornPlesioth Fin -> Twisted HornPawprint Stamp -> Mega Bugnet 6) Swamp (Area 1) Alphabetical Order Gravios Carapace -> Dragonite OreGravios Head -> FirestoneLao-Shan's Spine -> FirestoneSmall Monster Bone -> Iron OreGravios Wing -> Large LobstershellGiant Beak -> LightcrystalKirin Mane -> LightcrystalRathalos Wing -> LightcrystalWyvern Marrow -> LightcrystalBasarios Shell -> Machalite OreKut-Ku Ear -> Machalite OreMedium Monster Bone -> Machalite OreRathalos Claw -> Machalite OreRathalos Tail -> Machalite OreRathian Claw -> Machalite OreRathian Spike -> Machalite OrePawprint Stamp -> Mega PickaxeGarbage -> Sap PlantMystery Bone -> Sleep HerbBasaios Wing -> Small LobstershellInsect Husk -> Special MushroomIvy -> Special MushroomBlue Mushroom -> Special MushroomHoney -> Special MushroomHornet Bladefin -> Union OrePale Bone -> Union OreVespoid Bladefin -> Union OreVespoid Abdomen -> Novacrystal 7) Swamp (Area 1) Order of Priority Insect Husk -> Special MushroomIvy -> Special MushroomBlue Mushroom -> Special MushroomHoney -> Special MushroomSmall Monster Bone -> Iron OreMedium Monster Bone -> Machalite OreBasarios Shell -> Machalite OreGravios Carapace -> Dragonite OreRathalos Wing -> LightcrystalRathalos Claw -> Machalite OreRathian Claw -> Machalite OrePale Bone -> Union OreGravios Head -> FirestoneGravios Wing -> Large LobstershellBasaios Wing -> Small LobstershellLao-Shan's Spine -> FirestoneKirin Mane -> LightcrystalRathalos Tail -> Machalite OreWyvern Marrow -> LightcrystalHornet Bladefin -> Union OreVespoid Bladefin -> Union OreKut-Ku Ear -> Machalite OreGiant Beak -> LightcrystalRathian Spike -> Machalite OreMystery Bone -> Sleep HerbGarbage -> Sap PlantPawprint Stamp -> Mega PickaxeVespoid Abdomen -> Novacrystal 8) Free Items If you trade with the Elder two or more times with at least one other opportunity to trade with him (based on the fact that the Elder will trade with you four times before getting angry and shooing you away) he may give you a free item for nothing in return. This list is the same as the order of priority list, in which the game checks the item on the top of the list first, only this time you have a random chance of getting that item. If the top item was not "won", the game moves onto the next, and checks to see if you "win" that, and so on, until an item is finally obtained or you fail to win every item. The percentage after the item is the chance you have of obtaining said item before moving on to the next opportunity (only if the previous item was not won). Sap Plant -> 10%Small Bone Husk -> 10%Potion -> 10%Blue Mushroom -> 10%Special Mushroom -> 10%Cricket -> 8%Insect Husk -> 8%Knife Mackerel -> 8%Kut-Ku Scale -> 8%Small Monster Bone -> 6%Old Pickaxe -> 6%Scatterfish -> 1%Max Potion -> 1%Machalite Ore -> 1%Power Seed -> 1%Armor Seed -> 1%Godbug -> 1% 9) Contact and CopyrightCopyright - 2004 S-Hiryu, WorldZero.com This FAQ may not be reproduced under any circumstance except for personal, private use. It may not be placed on any web site other than WorldZero.com or otherwise distributed publicly without advance written permission. Use of this guide on any other web site or as a part of any public display is strictly prohibited, and a violation of copyright. Submitted by S-Hiryu - Created 5/1/07 (Last Modified 5/2/07)See All Monster Hunter Walkthroughs and FAQs
Topic by jellybean10122
This is to put on a dummy to denote whether a kick or punch could break a bone.?
Question by implaxis | last reply
Please tell me, as I am going to download some new apps. Try and keep the under £2 please.
Question by Perkinator | last reply