How to make your own 2000 watt light bulb.
Topic by pritishs4 | last reply
Whilst looking through the recent -ibles i saw CYNICALifornia's variation to the light bulb lamp. Running, er, clicking as fast as I could, I got to the home page and saw that his -ible was featured as well, as I scanned the page I saw, parallel to his, My -ible! IT'S ON!!! not really, I just thought it was funny that they were both featured, almost the same -ible, and right next to each other..
Topic by bumpus | last reply
Hi, i got a problem with the power supply of a light that i found in an old car. it is a 6V 55W light, the thing is that i want to make it work with a battery made of several cellphone bateries but i don´t know really whats the voltage and current that my recicled battery must have in order to turn on the light and survive. thanks for reading, and i hope anyone can help me.
Topic by kvalero
Oh what to do with the light bulb now that you're basking in the efficient glow of your CFLs? Well, you could convert them into these light bulb lamps as Sergio Silva has done. It's a pretty sweet item with neodymium magnets holding them in place on an included acrylic plate with embedded bits of steel.However, the price tag is $650 for the set which is pretty flippin' ridiculous for what can be remade with scrap and $10 of materials, if that. To be fair, the light bulbs Silva makes are sturdier than the regular item, are all made by the original artist, and are limited to a run of 66. So you're buying some design-y street cred before they get knocked off and sold for one-tenth the price. Linkvia bbgadgets
Topic by fungus amungus | last reply
So I was wondering do you think it would be possible to take an old ligth bulb hallow it out and use it as a fish bowl for a mini fish? Im just not sure should I put a small plant in there and if so what kind of plant so maybe just a little air pump while Im gone. Or would a small fish be fine if I put some rocks on the bottom and then just changed it once a month or so? Or would it end up being every day do you think? Ethan PS I hope people dont bite my head off thinking Im a horrible person I just like the idea of having a fish in a light bulb I think it would look cool so Im asking before I do it and accidentally kill a fish...
Topic by mindstormmaster1 | last reply
I was in my quantum class today taking in some nice Schrodinger equations. The professor was having a hard time figuring out which students were understanding the material. I thought to myself, "Wouldn't it be nice to have a consistent way to show the teacher you understood." So then it hit me... why not have a classic idea bulb on top of a hat. You could push a button and it would light up. Thus indicating to the teacher that you understood the material. Simple enough, but kind of annoying to push a button every could of minutes. Why not use the new Mindflex toy to gauge your understanding of the material? The user could wear the headset like usual. Instead of controlling a ball like in the game, a sudden decrease in concentration (the realization of an idea) would turn the light bulb on. The electronics should be simple enough. It would obviously be better to use an LED instead of an actual light bulb. I would build it myself, but I don't want to spend $60 on a mindflex game. What do you think? Elijah
Topic by Mirage_662 | last reply
Hello, Short question but sorry, I cannot seem to shorten it; the actual question is in the last two lines . My friend's outside light stopped working; Earlier today I was asked to replace the two bulbs; they had stopped working and seemed slightly brown on the ceramic part. They are four pin fluorescents; I have not used these type before. I went to Screwfix and their catalogue showed two bulbs that looked identical to the original but one model said for electronic ballast only and one type said for magnetic ballast only; the shop staff did not know what a ballast was and could not advise me, when looking at the original, which type to buy. I went to Toolstation , no such distinction was made in their catalogue; I asked the guy about the ballast suitability; he did not know what a ballast was; I bought the one that seemed the closest in name. I have never has to think about ballast types before buying a bulb before; but after buying the bulbs I found a sticker on the lamp saying -electronic ballast. I stuck the first bulb in, it did not light. I put the bulb, instead, into the next socket; it lit and stayed lit. I put the remaining bulb in the first socket and both bulbs stopped working; whatever combination that I tried. The original bulb was an Osram Dulux D/E 26w/840 The new bulb is a sylvania lynx-de superia 26w 840 G24q-3 Technical Details Brand Sylvania Item Weight 9 g Product Dimensions 16.6 x 3.6 x 3.6 cm Item model number 25927 Part Number 0025927 Colour Cool White Shape Stick Maximum Compatible Wattage 26 watts Voltage 240 volts Specific Uses General purpose Batteries Included? No Type of Bulb Compact Fluorescent Light (CFL) Cap Type G24q EU Energy Efficiency Label A Luminous Flux 1800 lumen Wattage 26 watts Wattage 26 watts Bulb Features Low energy plug-in compact lamp Colour Temperature 4000 Kelvin Colour Rendering Index (CRI) 85 Average Life 10000 hours Average Life 15000 hours Bulb Length 167 millimetres Warm Up Time 30 seconds Lumen Maintenance Factor at the End of Life 95 I still do not know if it was the correct bulb or not but . . . Here are the questions: Are some bulbs suitable for both types of ballast ? What happens if you put the wrong type in; does it just not work; or does it blow the bulb; or/and does it damage the lamp? Thank you
Question by FriendOfHumanity | last reply
I have an iped electric moped with pedals which I believe has a in hub motor ( haven't looked yet) the problem I have is this the replacement bulbs are almost impossible to find The headlight for example is a 55volt 36/36 which I am finding impossible to find the rear brake light is 55 volt 15/15 watt unsure of the wedge bulb parking light which is 5mm width and there is definitely no 55 volt wedge bulbs this size The only conclusion I can think of is to insert a dc converter which will drop the voltage to each bulb from 55v to 12v giving me more availability on bulb selection I am just curious if any one on hear knows where I can get 55volt bulbs ? I also noticed a post on here regarding someone looking for extra speed and was answered with disconnecting the grey loop wires under the top cowling Well done that man you gave good advice I done mine myself and yes the increase is there I don't know if I have to keep looking for answers on this but my email is firstname.lastname@example.org if anyone can help Many Thanks all Nick
Question by fosters1967
I want to use LED bulbs in my turtle tank, but it MUST be waterproofed. I plan to pun it off 12V, with a resistor. I'm not going to run the 12V cable into the tank, I'm going to place the resistor outside the tank with it's own cable going to the LED. Any ideas on how to do it?
Topic by Josho | last reply
Is there any way of connecting multiple fluorescent light bulbs *THIS* to 1 power plug....i'm a newb, so if this is pretty complicated, i'm gonna need some articles :) the reason i ask this is because i'm thinking about constructing a (full room) black light in it's own sweet casing. it would go around my whole room around the perimeter (around the upper edge, touching the ceiling) so ya...i have enough construction knowledge to build the casing and everything else, BUT i do not know hardly anything about electrical stuff...which is why i have you guys :) so ya...any help (or different solutions other than light bulbs) would be greatly appreciated. thanks :)
Question by miqt | last reply
I am building a basic night light ordeal, and I used a photoresistor to detect the change in light. Of course, the photoresistor will, by default, only have a high output when there is light, so I used an inverter (Not Gate). My inverter is made up of a transistor , a 1.5k resistor, a 10k resistor, and leads off to a LED. The photoresistor would go off to the Base of the transistor, so it can invert the output. Originally, I had this hooked up to a 4.5 volt input (the photoresistor has 4.5 volts going to it, and the transistor had 4.5 volts going into it), but I wanted to brighten it up, so I upped the voltage to 7.5 volts so I could add a 6.3V Incandescent Flashlight Bulb (http://www.radioshack.com/product/index.jsp?productId=2102809). When I hook this up to a regular 6 volt battery pack, I easily turn the light on. When I connect it to the inverter, however, I don't get anything going on. I've upped the input voltages to 9 Volts, but still, no dice. Everything works fine until I change the LEDs to the bulb. So far, I've changed the resistor values in both directions (I've decreased them down to 10 Ohms, and increased them to a max of 1M Ohms). The only way I can possibly get this to work is by removing the Resistor going to the Collector, but then it is constantly on. The output of the photoresistor no longer matters. The output of the inverter is constantly high. Any ideas? All help is appreciated.
Topic by freethetech | last reply
Have three bulb first time switch on it will on the center bulb second time switch on it will on the other two corner bulb but the center bulb will be off
Question | last reply
Hi , I wounded if any body would be able to help me out? I have been give a few led chip, all 10w 12v 900ma, have seen people make or replace lights in there house with 1-3w bulbs , but mostly there also in the us :(, and wounded if anyone could give me some light guided help I live in the uk and would like to light my house on these if pos so if the first works ill have to make 9 more at least to change all my bulbs lol cheers and thanks :)
Topic by Xxxdvxxx | last reply
I have three teardrop pendant lights over my counter; one light bulb burnt out. I tried to change the bulb but it does not screw in - not sure what type of bulb this is? Really, I've changed light bulbs forever, but can't figure this one out. Search You Tube and DIY for a video but only found typical light bulbs or recessed lights. Your help is much appreciated.
Question by paulbb | last reply
I am trying to fix a broken spectrophotometer that is valued at well over a thousand dollars. The problem: looking in the light bulb compartment, it seems the tungsten-halogen lamp is pretty dim. The bulb is rated for 6V. Using a multimeter, it appears to get about 8 volts. Could too much voltage cause the bulb to be dim? If so, How can I lower the voltage to 6? Would a resistor work? Thanks!
Question by sciencehideout | last reply
Hello to all instructable community, I was trying to find a device that would detect when a bulb is burned and will switch to another lamp. The lamps I am using are 25Watts ac bulbs. I tried to Google a bit, probably didn't search the right keywords, but I couldn't find anything that does what I want. If you got any idea what i am talking about please reply. Thanks to all Omar
Topic by omarharoun | last reply
I've started changing the light bulbs at home. I want to use economic ones like the one in the picture. The only problem that I have is that when I turn off the light , the bulb starts blinking. I have a power switch similar to the one in the picture. It has a little lamp behind the red dots that goes on when you turn out the light. It helps you find the switch in the dark. I heard from someone that the blinking is related to this lamp. Does anybody know how to fix this? without removing the little lamp in the switch
Topic by ZoDo | last reply
In reading some of the instructables on DIY projector lamp replacements I decided to give it a shot. So I purchased a Proxima Ultralight LX1 off of ebay, and when it arrived it contained no previous bulb, so I purchased a MR16 style 100 watt halogen bulb and installed it (with a seperate power supply). When I started it up and connected it to my laptop it worked fine for about a minute or so (give or take) but then the image went blank (not the bulb but the LCD screens showed blackness) for five seconds, then the image popped up as nothing had ever happened. I have tried everything to prevent this, other computers, killing the ballast (which is quite easy, only one wire to disconnect) different video sources and no dice. But I do know that it has nothing to do with the light bulb because it is on a completley different power supply and is not connected electronically to the projector in any way, there is something wrong with the controls of the unit Any Help would be appreciated, Thanks Bwpatton1
Question by bwpatton1 | last reply
I know this is basic, but I'm not familiar with wiring anything that could potentially burn the house down so I feel its better to ask. I'm wanting to wire up three lights to go over my basement workbench to all work on the same switch. The image shows what I planned to do, was just wondering if there an expert out there who could tell me if this is going to be safe? Would 60 watt bulbs ok?
Topic by REDnumber5 | last reply
About a year ago, I came across this LED lamp that was on sale at my local Target store. It caught my eye because it had a little tray at the base of the lamp along with a USB port for charging my devices. Since the first time I plugged it in and turned it on, it makes a buzzing noise. At first it didn't bother me, but now that I am spending more time at my workbench it has become annoying. I understand it is kind of common for LED bulbs to do this because of the dimmer switch being outdated, however this lamp is not dimmable nor is it a "bulb" so to say. It's about 7-9 SMD LEDs on a circuit with a rocker switch. If it makes a difference, I do have my lamp plugged into a surge protector and don't have anything plugged into the USB port located at the base of the lamp. What can be done (other than throwing it away, of course) to stop the buzzing noise coming from the lamp? Thanks in advance!
Topic by TXVisual | last reply
Hello,my first time posting here, hope I don't break any rules.I want to wire up a circular fluorescent bulb for a sculpture.I bought a SODIAL(R) 40W Ring Tube Fluorescent Lamp Electronic Ballast AC 220V 0.19A and a 40W T9 Circular Warm White Tube.Could someone advise me on what other bits I need (e.g what starter) and a guide on how to connect everything up to each other and power? I'm based in the UK if this affects potential suppliers. I have done this with a straight fluorescent before but by cannibalising a bought fitting. Pretty clueless when it comes to electronics and would like to avoid killing myself/ others if possible.Many thanks!
Question by lochnessmonstery | last reply
I put track lights in my kitchen several years ago. I recently found some LED bulbs but they cost around $15-30 each. Can I mix different bulbs in track set?...$60.00 is a little steep. I'm hoping for less light / heat output.
Question by artist without a medium | last reply
Question by Yusufi | last reply
Hey guys I recently salvaged the bulb from and InFocus LP1000B projector. I want to use this bulb as a light source but am not sure how to go about this because I do not know the voltage to run the bulb at or if the power to it needs to be limited somehow. From my research I believe it is a 350 watt Metal Halide bulb. Thanks for any help.
Question by nurdee1 | last reply
Hello! I'm having a problem and have ruined quite a bit of incandescent light bulbs over it: I need to open the thing just below the thread and I have no idea how. I've tried doing it with an X-acto knife, but it never breaks evenly, and usually, there are tiny cracks along the edge. Anybody out there have experience doing this and any words of wisdom? Thanks in advance :)
Topic by TashaDax | last reply
has anyone ever had a bulb go out on you while using your video projector and not had money to fix it i came across a way to temporary to fix it but i dont know if it will work for all projectors so im getting peoples opinion on if i should put this up as an instructable. please let me know what you think
Topic by kane89 | last reply
I'm wanting to create a giant hanging light bulb lamp, similar to the ones I've uploaded, but I'm not really sure how I would go about doing it. I think I would make it out of plastic. So I would need to create a mold and then make two halves on a vacuum form, but I have no experience doing that. I'm not sure how I would make a mold of a giant light bulb, what materials to use and how to make it. I had thought about maybe cutting something out on a lathe but I don't have a lathe and it seems like it would have to be pretty big. I also thought about paper mache but I was afraid it might be too bumpy and light bulbs are smooth. Also once I have created the vacuum form plastic halves how I would attach them together with out having a large seam show.
Topic by stuarttt | last reply
Instructables users have inspired others yet again. Using LinuxH4x0r's Light Bulb Greenhouse and the dual homemade responses to the $650 Light Bulb Lamp--by bumpus and CYNICALifornia--as a starting point, Treehugger has added to the list of ways to reuse old incandescent light bulbs. Plenty of options to both make something useful and help protect the environment at the same time.Link
Topic by joshf | last reply
Question by zs | last reply
I'm trying to build a steam-punk costume and wanted to use a motorcycle battery to power several edison squirrel cage style bulbs. Fortunately these blubs look better if they are dimmed, but what I'm having a problem with is a schematic and what type of transformer to use.
Topic by Deepeyes | last reply