changes

I see the changes to the site . The only question i have is i liked going to my instructables and going to the stats to see  how many visited that instructable each day . Is it possible to do this still and i am missing it ?

Topic by coolbeansbaby68   |  last reply


Change is good

Please do not change Instructables to much. Adding classes is very good but don't turn it into a school. I have been to school. I like Instructables the way it is. In formative helpful and exciting. I don't know how others feel but this is how I feel. Thank you . 

Topic by BryanB7   |  last reply


change of emailaddress

Next month my emailaddress will change, how can I change it in my account ?

Topic by Daddy_M   |  last reply


Name Change

I am going to be changing my username to TheChemiker, because my current one, as you all probably know, sucks.  Chemiker is chemist in german, and if you don't already know, I am half german.  It should change in about a week.

Topic by TheChemiker   |  last reply


Change Counts

A word to the wise: keep your pocket change! I have a normal sized red plastic cup that I put all my spare change in. It was pretty full...but not to the brim, so I decided to count it tonight. Over $50 in quarters - 65 all together! What a pleasant surprise for me. I'll have to get some paper rolls from the bank so I can cash it in!

Topic by Weissensteinburg   |  last reply


username change?

Well....is it possible?

Topic by MurdoomTheMad   |  last reply


name change

I changed my name from i am awesome to coolknexcreations. It will be changed within a week (if the admin reads my comment.) if you are happy with my name change, (like me) please leave a comment. Dont forget to subscribe! :D

Topic by coolknexcreations   |  last reply


diode change

I'm building a picmicro programmer, and I'm fcollowing the schematics from this from sparkfunhttp://www.olimex.com/dev/images/pic-pg2c-sch.gifthey want a BZV55C5V1 diode, but the closest thing that I could find on mouser was a BZX55C5V1 diodehere's the link for the BZV55C5V1 datasheet, just click one, they're all the samehttp://www.datasheetcatalog.com/datasheets_pdf/B/Z/V/5/BZV55C5V1.shtmlhere's the link for the BZX55C5V1 datasheethttp://www.fairchildsemi.com/ds/BZ/BZX55C5V1.pdfPROBLEM SOLVED THANKS TO THE CITIZENS OF INSTRUCTABLES

Topic by guyfrom7up   |  last reply


change username

I want to change my username how do I do that

Topic by DELETED_rerwin09!   |  last reply


changing name

Is there anyway system administrators can change my account name? Or do I have to leave this account and start anew? Please help.

Topic by BartSimpson   |  last reply


Password change

When I go to change my password I but in the old/new/new and hit change password but it co,es back with 'error on page'

Topic by curlymixl9   |  last reply


Name Changing?

I have been on the name changing forum. I have suggested for my name to be changed from "tombuckey" to "Tombuckey"  I know its only one letter but I have requested it over 3 times and still no change? any reasons?

Question by Tom Buckey   |  last reply


Games for Change

Everyone loves video games. And most everyone loves social change. So, video games for social change.... a sure winner!If you're in New York City next week, be sure to check out the Games for Change Conference.It's hosted by Parsons School of Design, the greatest school on the planet (I might be biased).

Topic by randofo   |  last reply


change language

I have Japanese mac computer. second life is run under the Japanese language. how can i change the language in second life?

Question by addharmawansa   |  last reply


New change?

I have noticed that when I go on an instructable, all of the details and related 'ibles are now to the left, instead of the right. Is this just me, or everyone?

Topic by Hiyadudez   |  last reply


images not changing?

When ever i click on any image it loads but its the same picture over and over again!

Question by cucmucy2   |  last reply


Homepage changes

I am getting annoyed by all these new "fixes" to the layout on this site. I really wish it would go back to the 2 column layout with featured on one side and popular on the other. Look so much cleaner and nicer.

Topic by Phade   |  last reply


Name change

Im going to change my name to: Tom Buckey. just so you all know so you dont think its a faker ect. Thanks for reading

Topic by Tom Buckey   |  last reply


Changing the sensor

Hello guys, I want to make this circuit I just don't want any light to be visible. So, I was wondering if I could just change this LDR sensor to a IR sensor and still get the desired results.  Thanks,

Topic by HavocRC   |  last reply


Name Change

Hey everyone, I just wanted to let the knex community know that I was changing my name to: Master Zane I just wanted to let people know so no one would wonder if I left or not(not like anyone would notice anyway lol) Kookoo For Knex (Master Zane)

Topic by Master_Zane   |  last reply


Change in the Couch =)

So recently, a friend and I decided to set up a website with a forum and a community - we want to create something pretty special here. We decided to call it Change in the Couch, because, who doesn't love it when we lift up the couch cushion to look for the freaking TV remote, and we find like, seven dollars in change? I know I do. If you don't, then you're a fool - or just really tidy.Seriously though, we could use some members and fun times, so feel free to sign up and discuss :) Maybe you'll meet some cool folks.http://forums.changeinthecouch.com

Topic by mikesty   |  last reply


Changing Faves

So much cool stuff, but now I have hit the max amount of items I can save as favorites. How can I remove/delete older favorties, so I can add/save newer ones?

Topic by dannozanno   |  last reply


Change For 2014

Hey guys, I just wanted to let you know that not only will I be posting reviews but I now will also be posting instructions as I have had a few practices of how to make instructions and I've got the hang of it. Zombiekiller-93

Topic by Zombiekiller-93   |  last reply


Homepage change

I've just released some changes to the layout of the site.  The home page is different; we're trying how things go if we sort by the top-level categories, if that helps people find things they're interested in more easily. We have also added the ability to allow authors to 'feature' comment threads on their Instructables. You'll see a checkbox by the bottom of each top-level comment marked "Feature Comment".  Checking it will pull that comment and all its replies to the top of the comments, and keep them there (it will also close that thread to further replies so as not to be hijackable). We expect this to be used for threads that really add a lot to the Instructable, but which are in danger of becoming hidden on later comment pages as additional comments are made.  Use sparingly!  Also note that the rearrangement does require a page refresh; the thread won't pop to the top immediately. There are a couple other small layout changes as well, nothing too big.  Also we've done a little work on contest management, which will help the admins do their work more easily but doesn't show for everyone else.

Topic by rachel 


data changes

I'm using Windows XP on a desktop computer Firefox I've been editing some instructibles The last one I edited was : Easy (no power tools) workspace with storage for large paper I've been following the total number of views of my ibles for some days in 'view profile'. After the last edit, I've lost about five thousand views.  The ibles all show the same number of views.  What happened?

Topic by mole1   |  last reply


Backend changes

I've just released a new minor version of Instructables.  There are no significant front-end changes but we have done some things under the hood to allow for upcoming features.  There are a few minor bugfixes, and for Pro members, you now have a note with your renewal date listed and if applicable, a link to renew your membership. Going forward, I will write a forum in this area for each release, even if all I have to say is, "stuff under the hood".  For bugfix releases, I'll edit the topic for the appropriate release.  If you find a bug, I'd appreciate it very much if you would take a minute to file it in the bugs section. Update: Whoops, broke some RSS feeds with that last release.  Should be OK now.  Let us know in the bugs section if you are seeing any RSS problems still.

Topic by rachel 


Editor Changes

As you may have noticed, for several months now we've been testing out a change to the Instructable editing process, what we've called the new editor. It's faster and better designed than the old one, and saves your work automatically as you go along. Well, we decided it was ready for prime time, and we've gone ahead and made it the default editor for everyone. The old one is still around if you want it - just click the "Switch back to the old editor" link on the top right of the edit section. But we think you'll want to stick with the new one (all of us here at Instructables HQ have been using the new one exclusively for quite some time). Try it out if you haven't yet, and tell us what you think in the comments!

Topic by rachel   |  last reply


Editor change

I've just released a new version of Instructables, with a new updated version of the rich text editor. Also, we set the default for comments to not use rich text, because most comments don't need it; but you can click the 'rich text' button if you want to use formatting in a comment. The new editor looks a little different but works basically the same. As always, Pro users do have a greater range of formatting options.  It has a couple nicer features than the previous one (e.g. you can paste directly into it) and runs a bit faster.  We hope you will find it an improvement too; please let us know of any problems you may encounter with it!

Topic by rachel 


Changing polarity

Hi everyone, the problem I have is probably wither really simple or really complex.. .but either way here goes: I have scavenged an old CD-ROM drive for parts, namely, the motor and gears which move the CD-ROM door in and out (depending on the direction the current/voltage is flowing). I want to setup a system where upon flicking a switch (either SPST, SPDT, etc, whatever is needed) in one direction, the tray ejects, and when flipped the other way, the tray loads. In essence, I want the current/voltage running in opposite directions depending on the position of the switch (Up, one direction; down the other direction, and center, off). If necessary some indicator LED's and additional switches could be used... but I don;t really know where to go from here.. .any help would be GREATLY appreciated. Peter

Topic by Murf   |  last reply


Gaming is Changing

I used to like console gaming because systems rarely/never costed more than $300, it was simple, and everybody had the same stuff. There were no expensive HDTVs, broadband-requiring/expensive online play, the fanciest peripheral was the rumble pack, and your console didn't do anything except light up a power light if there was no game in it.I'm not rich, my parents have never owned a house, and with all the fancy crap that consoles require and do today, I can't afford even a Wii (not that I'd want one, the novelty has worn off). I'm not saying all these improvements in gaming are bad, but for someone like me, I just don't have the money for a shiny new 360, or even high-speed internet (I live on an acerage and there's no cable in the country) for online muiltiplayer/communication.For now, I'll just have to fondly remember having home tournaments playing Star Wars Episode 1 Pod-Racer on N64 with my friends.What do YOU think about gaming today?

Topic by Aeshir 



changing name of instructable

Can i change the name of an instructable i have already posted?

Topic by clasof56   |  last reply


Changing the name of an ible'

In the past, changing the name of your ible' also changed the URL.  So the old URL doesn't work anymore, and all previous links to that ible' breaks. Is that still the case?  Is it safe to change names now?

Topic by insusr   |  last reply


Profile picture change

In' Edit profile' I  selected 'Change image' , I choose new Image and uploaded but still old image only appearing New image does not get loaded ?

Question by nachiketa   |  last reply


No effect of email change

Hi although I've changed my contact email to some other account I'm still receiving newsletters and other email from Instructables on the old one. Please fix this, because it's extremely annoying. Regards Marcin

Topic by mcylke   |  last reply


Ratings do not change.

So I decided to give the knex pinwheel here: https://www.instructables.com/id/Knex-Pinwheel/ 4.5 stars out of 5.  However, the rating did not change. Before I rated it it was at a 3.38, with 3 ratings.  After, it was still a 3.38, with 3 ratings.  I tried rating it other ratings and this did not change the rating either.  Again, this shouldn't be on the top of a priority list or anything, but its definitely worth fixing.

Topic by DJ Radio   |  last reply


Time for some change

It's time to change my room around and I'm clueless now because I've changed it pretty much every single way. The picture below is how it's currently arranged, professionally done in PS. Could anyone give me any ideas for arranging it differently? My desk is a corner unit, sorry all I could draw is a square, too lazy to freehand. Thanks in advanced.

Topic by Punkguyta   |  last reply


Risks in Changing Username

I was considering changing my username. I just wanted to know ahead of time if there can be ANY adverse affects from changing my username. (i.e such as data loss, loss of management options for groups, that sort of thing)

Topic by LoneWolf   |  last reply


possibility of Wave Change?

This theory states (my own be exact) that a certain wavelength can become an amorphous solid using a certain gas, a friend of mine agreed with me. What is your opinion on this matter?

Topic by crc09   |  last reply


Change cover picture

I want to change the picture which comes up as the cover of an -ible. So far, it is just a draft, but it shows the 1st pic i chose for step 1, BEFORE I re-arranged steps.

Topic by Toga_Dan 


How to change nickname? Answered

How can I change my nickname?

Question by Mr. Muggle   |  last reply


Changing Your Username

Tired of your username? Do you want to change it? There are two ways of doing this!  But be aware you can only do this ONE TIME! To change it on your own, follow these directions. 1) Go to your "You" page, and scroll all the way to the bottom. 2) The last thing you'll see on the page (before the footer) is a large button saying "Check Availability" 3) Enter your desired username into the text block. 4) Click "Check Availability" only if you want to change your name. 5) This can only be done once by each person, so choose carefully!

Topic by admin   |  last reply


Changing screen name?

 Hi, i was wondering if there is any way to change my screen name. 

Question by JimJong   |  last reply


Portable change table

We are running in partnership with other agencies and the City of Toronto, Parks Forestry and Recreation an accessible swim program for people with physical disabilities. Many of our participants require that they change in a lying down position and thus require a "change table". At this point we are looking at two locations that require this. Challenges include storage as storage space is of high premium at the pools. It would have to be at a height that would be comfortable for the support staff. It should be wide enough to be able to turn a person on their side safely. Sturdy enough to be able to handle up to 350lbs safely. Should be folding (for storage), and have wheels that lock so it can be moved easily. We assume wood is the best material for this (or easiest to work with), but we are open to suggestions. It should also be long enough. We have not come with specific numbers (how many inches/cm wide or high e.g.). For this some of us involved in this program need to discuss the details. However, you may have some questions too, so if you let us know we can provide answers to your questions. A few years we purchased a portable massage table. However, it is not wide enough to accommodate some of our participants with being turned safely. About Tetra Tetra is a non-profit organization that recruits skilled volunteers to create customized assistive devices for people with physical disabilities. See our instructables group at: https://www.instructables.com/group/tetra/

Topic by chuirich   |  last reply


Did the prize change?

I could've sworn that the first day the USB Contest was out, it said the first prize was a Leatherman "Squirt". Now it says Leatherman "Juice". I Didn't even know the squirt existed until I saw something yesterday, and I thought it was the prize from the USB contest. I'm not crazy, am I?

Topic by kcls   |  last reply


Change yarn colors ?

How do I change yarn colors in crochet With pictures?

Topic by Godloveus1962   |  last reply


Name Changed: MegaMetal8

Name successfully changed to MegaMetal8!! (Capitals)

Topic by MegaMetal8   |  last reply


change lcd 6220

Any in detail description of changing the lcd on a nokia 6220 ?

Question by aleafstorm 


Changing the Chins dust?

Hiyas how much sould i change the chinchillas dust?

Question by juicymoose   |  last reply


how to change username?

Question by juliahosea   |  last reply