Habbo coins

Leave the User Password habbo habbo and quantity of coins example: User: ful54 Password: gash15 Quantity: 1500 (detail must be habbo.com.br)

Question by felipe320   |  last reply


old coins

Anyone have any old coins sitting around(or collections) pre 1950 foreign and us? looking to buy.

Topic by drewscollectibles   |  last reply


Hollow Coins? Answered

Does anyone know how to go about hollowing out a coin to conceal a MicroSD card or USB storage device? Like this one: http://makersmarket.com/products/micronickel-hollow-spy-coin What is the bare minimum toolset that I would need?

Question by mittenhands   |  last reply


Coin Tumblers?

Anyone ever made a home made coin tumbler? Store bought tumblers are pricey, would like to be able to wash/clean all my old coin finds that I get when metal detecting.

Topic by welkopole   |  last reply


Habbo coins

Leave the User Password habbo habbo and quantity of coins example: User: ful54 Password: gash15 Quantity: 1500

Topic by felipe320   |  last reply


What coin is this?? Answered

I found this coin while looking through my collection, but i dont know how old it is or what type of currency it was used as, -its middle eastern. -Its written in hebrew -I think its made of bronze

Question by monsterlego   |  last reply


Coin Collectors

Hey guys, I was just wondering if anyone here collected coins. My brother, and my dad, and I all collect coins as a side hobby. What coins do you collect? What types do you have, and the oldest ones? I have many books for nickels, dimes, and pennies. I just love the feeling when I can open up the book and find it full! My brother and I just bought some old Indian Head pennies, as well as some Steel Pennies from 1943. (During WWII) I have many foregin coins, as well as about 20 Susan B. Anthony's. I have about 10 Sacajawea coins, and a few Kennedy Half-Dollars. I just love the feeling of the profit that will be made in the future. Today I collected about 6 brand new 2007 Pennies, and took them out of circulation. Share your tips, tricks, and cool places to find your coins! As well as your coin collections!

Topic by Brennn10   |  last reply


From Coin Slot to Coin Segregation to Coin Dispensing, Help?

Hey Guys... don't know if I posted with the right category, so i'm open to corrections. ... Need advice in the process from Coin Slot to Coin Segregation to Coin Dispensing, especially Coin Segregation and Coin Dispensing. ... From insertion of coin, Coin Segregation will take place, which will then put individual coins to separate casings. ... and from there Coin Dispensing should be available for each casing. The logic for dispensing would be "1 click to 1 coin dispensed" . ... already have an idea on separating each coin from one another upon insertion in coin slot and then to coin casings. ... the problem would be is on the Coin Dispensing, need help and ideas. Thanks if replied/answered.

Question by Gedon   |  last reply


what type of coin is this? Answered

I am asking this question because i found it on the ground while walking, and i don't know what it is . i gave you two picture shots front and back.  1 who is the lady 2 what does the bald eagle mean 

Question by hellmaster993   |  last reply


i have a coin i found what is it? Answered

This is a very strange coin what is it HELP.

Question by hellmaster993   |  last reply


what type of coin is this and what does the pictures mean? Answered

I found this strang mexican coin but i still don't know what it is. i have a question , two of them 1 what does the picture with the eagle or dragon mean and  2 what does the pictures around the coin mean.

Question by hellmaster993   |  last reply



misstruck dime

I have a 1995 or 1999 misstruck dime and was wondering how much its worth

Question by lisakay49   |  last reply


Counterfeit or Error coin? Answered

Hello, I have a 50 pence coin that I noticed because it was not accepted in a vending machine. On comparison with another coin of the same year it became obvious that something was awry. I don't mind because I like fake coins, they are interesting. It is noticeably thinner and at least a gram lighter; it just feels less substantial. The rim on the upper half of the coin on both sides has either worn away or was never there. I looked on the Googles but can only find information on counterfeit pound coins, of which there are millions ( between 1:50 and 1:200). It seems that a 50 pence may be too low in value to fake. Are there any coin collectors out there who know whether this is likely to be a fake coin or an error coin. If it is an error coin does it have a value. Thank you. PS Through reading around, I discovered that the 50 pence is a special shape; despite its  odd shape it has a constant diameter.

Question by FriendOfHumanity   |  last reply


coin/penny battery

Can i make a ''coin/penny battery'' with ''Bronze and Aluminium'' alloyed coin????. well my country's currency coins have following Composition: 1: Bronze and Aluminium       1 rs 2: Brass and Aluminium         2 rs 3: Cupro-nickel                      3 rs can i use any of them to make coin/penny battery?????please tell me if any of them will work.....

Topic by usama1994   |  last reply


Electronic coin dispenser

I'm trying to build an electrically controlled coin dispenser (all the coins will be the same type). I have a metal tube -just the right diameter for the coins - mounted vertically, with a piece of wood horizontally at the bottom. There is a gap between them of approx 1mm, just enough for a single coin to be visible. I've been experimenting with using a solenoid to swipe a coin from the bottom. Rather like the image here: https://www.instructables.com/answers/Petty-Coin-Bank-Design-Coin-Dispenser-What-shou/ Solenoids aren't cheap, and I was aware that the weight of the pile of coins (I'd like to be able to hold around 100) would mean it needed to be fairly powerful. In the end I bought some cheapo solenoids from ebay (around $7 each). They are rated 2A and have a hold force of 20N - this seemed a lot more powerful than I could find elsewhere for even 10 times the price. Given how cheap they are, I could even use two in parallel if I still need more power. I'm using coins with a 20mm diameter, but after the solenoids arrived I realised they only had a 10mm stroke - obviously not enough to fully push the coin away. I've tried using the solenoid to pull a lever, but this doesn't seem to work very well. Previously I'd also tried a stepper motor linked up to a disk with a coin-sized hold cut on it, rather like this: https://cdn.instructables.com/F49/GK0I/H703O9VD/F49GK0IH703O9VD.RECTANGLE1.jpg That worked pretty well but was very slow - it would take 3 or 4 seconds to dispense each coin. So, I'm looking for a bit of advice. Would I be better off splashing out on a more expensive solenoid with a 20mm+ stroke? Am I approaching it the wrong way?

Topic by psmith37   |  last reply


coin cell battery

Question about flashing red LED: I have a simple circuit--switch, battery, resistor, LED. Today, when I clicked the switch on, the LED came to life very slowly, as of it were fading in. I have never seen this behavior before. Is it the battery? (3V, 2032 coin cell and 100ohm resistor). Thanks.

Topic by yongeeks   |  last reply


Coin operated PS2?

I want to create a PS2 (slim) based fee paying game room for kids, but I want to make it coin operated. I want to use a MOSFET transister switch like this one http://brunningsoftware.co.uk/FET.htm which also doubles as a timer. The coin handling mechanism is the easy part, so dont bother about that.My problem is where to connect the MOSFETswitch in the PS2 console. My first idea was to connect one switch to each of the controllers ( to enable/ disable the controller's power supply on pin 5) but I understand the controller port is part of the PS2 motherboard and new electronic components cant be fitted there (true or false?). If true where else can I fix the switch in such a way that when a game is finished a new game cant be started without feeding in a coin?Any Ideas?

Question by Lusakan   |  last reply


coin modifying laws?

So my friends and I are planning to sell, well...things (I'm not going to give out any details as of now, later) that incorporate small round metal disks. now in all of our prototypes weve used coins for our purposes and they work great. but for what we make we need to cut and sand coins in different ways. and my friends always tell me "its illegal to change money in any way." But I've heard that its only illegal to modify money to change or duplicate the amount its worth - like making a penny into a dime is illegal but making a penny pac man figure isnt. can anyone clarify this for me? I'm fine doing illegal things like modifying coins for personal use but if were going to sell these I want to be a little more clear as to what is going on.

Topic by berky93   |  last reply


knex coin pusher

This is my knex coin pusher. before you start begging for instructions i dont know if i will post but if to many people struggle to build one i might post instructions, because im not posting instructions i have taken extra+ photos of the mechinism and how it works. i had to use white connectors because i didnt have enough coins, if you do this the connectors wont fit down the slots so you have to just place them. i would make a video but the batteries in the moter died. it has a secret gutter on the side that real coin pushers have and the monney goes to the owner of the machine, if you dont want this you can push the orange connectors on the right down and it blocks it out. this one is bassed on bezempje95 link to his one  http://www.youtube.com/watch?v=5dOPa1-zDUI he has more infomation on his in the link in the description.(if you havent looked at his you need to because its so awesome). if you cant build it from the pictures put a comment saying: "POST +1" with the capitals and if it gets over 15 before christmas i might post it.

Topic by slithien   |  last reply


Gluing euro coins together??

I have some coins from various countries that I have visited and would love to make use of them. I would like to create a bowl using all of the coins but have not found a glue strong enough to keep them together. Could anyone please assist? I have attached an image of what I would like to create

Topic by Hurleysamson   |  last reply


Collectibles

I have a very good coin collections my father left me.  I'm not really into coins, and would like to unload them to someone who has a good knowledge about coins.  He collected these coins while how was in WWIi.  Here is a description of what I have:   I have around 20 silver dimes that are so old, the dates have rubbed off. There is one dime dated 1907.  I have one Morgan dollar-date 1917.  I have several buffalo nickels.  I have the following silver quarters: 1952' 1954, 1947, 1942, (2) 1943, 1956, 1941, 1946, 1944, 1942, 1954, 1963, 1961, 1957, 1950, 1944, 1960, 1924, 1907, 1951, 1964, 1936, 1955.  I have several silver dimes, nickels, and quarters where the date has been rubbed off.  I have not "clean" the coins or "polished."  I would just like a "ballpark" amount of the coins I have....

Topic by wareaglesusanbf   |  last reply


Coin Press Want to Make

Do any of you have plans or the know-how to build a homemade coin press that can stamp 1 1/2" aluminum coin blanks?  Any help is appreciated.

Question by Clymer   |  last reply


Why would you allow this!?!?!?!

Https://www.instructables.com/id/Make-a-silver-ring-for-25-cents/ I am sorry to whomever posted this but this is illegal! And I think it should be removed! You can not do that to coins and should find a better way to make rings.. it is wrong. We are spending are tax dollars for these to be made. 

Topic by kelseykat2   |  last reply


Coin sorter, how to get a coin to trigger a sensor (buttons)? Answered

Hey people! So I am making a project, it count's coins via arduino. So I need a way the coin can touch a button or some sort so it can trigger a the code in the arduino. See, the arduino has 4 buttons each one is a value to a coin, in the real world (physical project) there is a coin which falls from a sort o slot. It falls straight. The question here is, how to trigger a type of switch, button, tab with only the force of the coin. Any ideas for buttons or tabs or switches or metal contacts please, thank you. Some kind of easy input sensor (maybe light sensor?) It has to be cheap and it has to be small.

Question by TobaTobias   |  last reply


PVC Coin Dispenser Belt

Anyone know how to make a PVC pipe Coin Dispenser Belt? Push a button & out pops a coin from one of fore tubes hanging on your belt.    I need to know what size pipe to use, how the triggers work to spit the coins out & how to put it all together.

Topic by elkaddalek   |  last reply


British law on defacing coins? Answered

I wanted to drill through a 10p to make a ring like the ones on this website. BUT I NEED TO KNOW THE BRITISH LAW Lots of people are saying its illegal and stuff.  

Question by The Science Guy   |  last reply


put coin draw power

This project i have to chose as final year project in that i want to add  coin mechanism which are used in pco  so plz can u give information about that also how i can use it in this project

Question by krutika agare   |  last reply


Coin cell battery holders? Answered

All right you geniuses - I have yet to find an easy and elegant way to make battery holders for coin cells. The little buggers just slide around in anything I've tried to rig up. I've also searched high and low for commercially made battery holders. Obviously I'm not being creative enough, and I'm looking for something more sophisticated than tape. Bring it on!

Question by brandegor   |  last reply


Coin a phrase, or one liner

Have you ever wonder were, phrases come from like  " That's what she said " or  "See you later.......not if I see you first" or "Well, there's your problem!" I think i may of coined a phrase, but of course I can't prove it  " Its funny cause its true"   I even heard it on TV the other night, I have been saying that for years. Anyways today after a student made a mess I gave him a mop and bucket and told him to clean it up. After 20 minutes I came back and he had managed to make the mess about 100 times worse. I was very annoyed with him and I was inspired to say  "Never send an idiot to do a job a monkey could do" Anyway there is, If it takes off I will now have proof that i said it first on 20 april 2016 So whats your favorite phrase or one liner?  Maybe you could come up with the next "That's what she said!"

Topic by liquidhandwash   |  last reply



Which New Zealand coins are best for hammering?

I live in Auckland, New Zealand. This in itself is awesome, but the only problem is that most Instructables like this or this call for American currency, and I seem to be running out of it. My options are to go to America again, or to find an NZ alternative. Obviously the latter is cheaper, so I was wondering which of our coins to use. Anyone?

Question by St Jimmy   |  last reply


what do you collect?

What do you collect? i collect bionicles. there like models and are fun to make. so far i have 18 and a castle type thing. i have 3 that are around 7 years old!! btw. i also collect ds games(hence the name)

Topic by dsman195276   |  last reply


how to make a coin-battery charger?

to be more specified a coin battery is the one like on computer motherboard

Question by DELETED_messam   |  last reply


Petty Coin Bank Design - Coin Dispenser. What should i use?

Hey Guys, need your advise on this... Going straight ahead to the point, What can you suggest i can use for the movement of the Plate in the Coin Dispenser Design in the image? I need a component that does a push-pull action based on the design inspired from this video: http://www.youtube.com/watch?v=rwG-sG27360 Need your advise. :)

Question by Gedon   |  last reply



I want to make my own change sorter/counter.....

I'd like to make a change sorter/counter that I can use with my PC to figure out how much money I have in some 5 gallon buckets of change that we gathered while cleaning some old fountains. (Yes, they said we could have what we found under all the gunk as long as we got the fountains clean and back to working order.) I want to be able to dump some coins in a sorter/counter and have my PC tell me how much there is in a given bucket of change. I don;t want to use estimating techniques like calculating the approximate number of coins of a given type by average known weight of the coins. I want an actual tally - a count - of all coins of each type and unknown coins (slugs). Any ideas?

Topic by squishyalt   |  last reply


My Silver Coins!!! What's it worth?!?

I am not too sure about what references to trust, so I want to check with you what all my silver is worth. DIMESTotal: 31 QuartersTotal: 18One is a 40% bicentennial proof. Another is a (I don't know why but,) silver bicentennial. HalvesTotal: 6One is a 40% bicentennial proof DollarsTotal: 5Lots, huh? And by the way, one of the dollars is on it's way from eBay, and another is a 1971 proof. Another is a 40% bicentennial proofPlease let me know if you can find the value, THANKS!

Topic by Flumpkins   |  last reply


Who here enjoys coin collecting?

Ive just started collecting coins and Im looking for some tips on cool ways to invest my money, in money.  Thats still such a neat idea to me.  Id love to hear some ideas, so give me a shout.

Topic by SpaceProds   |  last reply


How to make a super-lucky coin

Saul heard about this sweet idea at the G4G8 conference. It's perfect for an Instructable - hopefully someone is suitably inspired to do it.Take 40lb's of pennies. Drop them all (equivalent to tossing). Collect all those that were heads and put them back in the bucket. Drop them all again, again choose all those that land heads. Repeat until there is only one coin left. This is the luckiest coin in your bucket. Apparently, one guy got a coin that tossed 17 heads in a row...

Topic by ewilhelm   |  last reply


Help with a cast metal coin instructable!

Need help finding a particular instructable, friends.  I would almost bet body parts that I saw an instructable here that had the following process to it for making a custom fantasy coin or medallion: Use the underside  bottom of a paper coffee cup-mix up a portion of Bondo and fill the bottom recess with it.  When Bondo hardens, pop out the round disc, paste a paper disc onto it then draw out your coin or medallion design.  Carve out your design with a dremel or similar, make a silicone putty mold, then when mold is dry, pour pewter or zinc to make a custom coin. Darken and polish. I know I've seen it, I'm wanting to stick it in my favorites list so I don't lose it again, and I especially want to thank the author for coming up with such a simple process for a custom medallion. Can anyone help me?

Topic by pheenix42   |  last reply


What is the value of a coin that has been struck offcenter?

I have a number of pennys that have all been mis-struck. One is a coin blank, two have been hit almost half off the coin, and one has the reverse of another coin pressed into it's obverse side. I know that the exact value can't be determined without seeing the actual coin but I was wondering if they could be worth anything more than a dollar or two.

Question by robocrazy155   |  last reply


PETTY COIN BANK- initial stage. Can anyone help?

Hey Guys... need some advise and help on the initial idea and components of this project. PETTY COIN BANK: PURPOSE: - To electronically segregate coins, display the total number of coins per each case and the total monetary amount inside, with dispensing and security capability. FUNCTION: - Individual coins inserted in the coin slot will be segregated to go to the corresponding individual coin cases and each case will count and display the number of coins dropped in them and a general display for the total amount of money inserted in the device. With a security lock, the device is capable of dispensing coins. so What do you think? Some advise on how i can make this possible... I do have some ideas on the segregation and dispensing mechanisms of the project, and how to identify each of the coins from each other when inserted in the coin slot.My concern would be the Displays for the each NUMBER OF COINS that falls per case (3 displays in total), and the TOTAL MONETARY AMOUNT display that counts per inserted coin in the system. Of course when dispensing, the number of coins should be decremented and the TOTAL MONETARY AMOUNT would change as well depending on the coin and number of coins dispensed. And as you might have read from the purpose and function, this project intends to have a security lock for the dispensing mechanism. Anyone can put coins but only someone that knows the code can dispense coins. I plan on putting a keypad for that. but here is the thing... I DON'T KNOW WHAT MICRO-CONTROLLER I SHOULD USE. I plan on using ARDUINO, but what arduino should i use? and if someone can help i'd like a count of the inputs and outputs so i can decide on what to use. Thanks if someone helps on this...

Question by Gedon   |  last reply


Do you know how to make a coin ring?

Do you know how to make a coin ring like in this photo you can detaisl ot dzr@ntlworld.com if you prefer

Topic by deonzronin   |  last reply


Anyone know what Country this coin is from? or how much it could be worth?

I found this coin at the bottom of an old jar and was wondering where it might be from? Or possible resale value.

Question by CrawdadMan   |  last reply



What should I use to make a necklace out of a coin?

I wanted to make a necklace out of my lucky coin, but i cant seem to find anything that tells how to do it without making a hole or soldering to the coin. i was hoping someone could point me towards a method that wouldn't destroy the coin so i could keep it hole and solder free.

Question by coldpsyco91   |  last reply


How do they do the 4 coin matrix magic trick?

I have watch a vid showing a soin trick called 4 coin matrix magic trick. ive been wondering how do they do that trick?

Question by dvaughn   |  last reply


do we have a coin slot that can accept many denominations?

We need to have a coin slot that can accept many denominations and what programmable pic is used in vending or mame machines?

Question by viennie   |  last reply


Is it possible to use programmable pic in making our project coin automated changer?

Our project coin automated changer. the user will insert 5 peso coin and it will dispense 5 (1 peso coins) by the use of programmable pic, is it possible? any suggestions? thanks.

Question by viennie   |  last reply