Search for connections in Topics


Connecting Yellow and blue Rods???

I have a cube made out of Yellow rods and one made of Blue rods. Each have part of a ball machine connect to it. Is there an easy way to connect the Yellow and Blue parts? I have been trying different things, but nothing makes me happy? Can anyone help??

Topic by imans314    |  last reply


is it possible to connect a rotary encoder to a USB A input?

Hello everyone, i've been using a laptop for a long time now and my laptop uses a touchpad scrollwheel. as we all probably know: they s*ck. lately i found instruction on how to make a desktop scrollwheel (https://www.instructables.com/id/Desktop_Scroll_Wheel_and_Volume_Control/), but is was very unclear and very large. ik started thinking of making one myself. smaller than the one they build. i would make it out of a tictac barrel and an old rotary encoder from an even older mouse. i want to use USB A input becouse that's easy to use and it's on (almost) every computer. is there any way to connect the A,B,C pins of the rotary encoder to the pins of a USB A input? p.s. i know, my english s*cks

Question by tommiesmee    |  last reply


i want to stop the flow of current .....

I have the following situation--> i have two DC power sources one is 9v and other is 7.5v i want to combine these two power supplies such that when one power source is off then other is available....  for example if 9v is off 7.5v is flowing and counter wise also but i want to combine in such a manner that when both are on both should give the output.....and the problem is the adapter giving 7.5v has a capacitor which could charge above its limit and can cause failure of the adapter or burn i should say... i have the connection diagram.....this works but when i connect a led to its output it glows normally...and when i turn off the supply the led turns off slowly  giving an indication that the capacitor is over charging....please help me to restrict the flow of current of both power supplies in each other.......

Question by anuk07    |  last reply


My Laptop's wifi Has Low Connectivity

I have an HP Windows 8 laptop that used to have fast internet. But for a while now, it's only had 2-3, or sometimes even 1 bar. I am using my neighbors internet right now. My sister also has a windows 8 laptop, and she uses the same internet I do. But she has great internet, mostly full bars. I know my laptop is capable of having fast speed too, I just don't know how. I think there is a setting or program stopping it from having better connects. I just want to know if there is a way fix the problem without messing with the modem. One last thing, when the laptop first starts up, the internet is at full bars about 2 seconds, then goes down to about two. Any way I can fix this issue?

Topic by JustinJohnson    |  last reply


How can I use my win2000 wireless laptop to connect to my original xbox live?

I tried enabling ICS, but I get an error message "internet connection sharing cannot be enabled. The lan connection selected as the private network is either not present, or is disconnected from the network. Please ensure that the LAN adapter is connected before enabling ICS" its windows 2000 and a regular xbox, help me ;-) please.

Question by bigb62533  


DIY about wiring a garbage disposal? Answered

I have a situation in which I have a receptacle under the kitchen sink that my dishwasher is plugged into.  This receptacle is then operated by a switch on the backsplash on top of kitchen counter.  We leave the switch in the on position so that we do not have to flip the switch each time we want to operate our dishwasher.  I now want to install a garbage disposal and place a switch under the sink.  I would like to come off of the receptacle described above. Could someone inform me how to connect to the receptacle so that the switch will operate but not interfere with leaving the switch on at the backsplash.  Any assistance will be greatly appreciated.

Question by cazorp    |  last reply


help with a connection? Answered

Does any one know how to connect a web cam to a crt monitor without a computer  or a VGA camera to a crt monitor

Question by techxpert    |  last reply


Facebook connection

When I click "connect with Facebook" button here is what happens: it tells me to sign in, then to accept instructables (witch I did) and then the window closes...2 seconds later instead of your Facebook account badge on instructables it just says "connect with Facebook" again! PLEASE FIX THIS

Topic by iproberry1  


Ground connection?

Link: https://www.instructables.com/id/High_Voltage_Power_Supply_For_Marx_Generator/?comments=all#CRLI0D7FV40AZSC

Question by rzigmu    |  last reply


wiimote connection?

I am trying to connect a wiimote to pc. i have a dealextreame $1.80 blutooth adapter. i have bluesolei and widcomm drivers installed. the pc is not recognizing my wiimote. any help is very appreciated. 

Question by Krayzi99  


LED connection

I am doing a school project. I am charging 4 aa batteries(Ni-Mh 800mAh) with a solar panel.I want to lit 3mm white LED with the battery. how many LED I can connect to this batteries and did I need to use a resistance?

Question by CCCareU    |  last reply


Phone connection Answered

I tried entering some codes to try to connect my samsung t301g to my mac. The phone didn't do much. I wasn't sure if I am supposed to enter the codes in the main menu. The link shows the codes that should work. http://www.metacafe.com/watch/582887/unlocking_hacking_tricks_for_samsung_cells/

Question by jbaker22    |  last reply


Connecting a USB?

How would you connect the wires from a USB (female) with wires that are red, black, green, and white, to a 5V boost regulator that only had three legs - Vin, Ground, Vout?  It's not for a computer so I don't think we need the green and white wires, but I could be wrong.  Which wire goes where?  Thanks!

Question by mckywer    |  last reply


Wireless connection

I have an old iPod touch that I can hook up to my tv I was wondering how can I use that  To connect my new iPod touch to my tv wirelessly  like I want to old iPod to be the receiver  then I would tv out that on to my tv any suggestions thanks in advanced .

Topic by Darki34    |  last reply


Gas connections

Hey Guys.  I have a laser tag project that I am making. Now I want to put high pressure air recoil on it. With the HPA being in the magazine and the recoil being a blow back valve in the gun. The issue I have ATM is the connection between the gun and the magazine. I basically want it like a butane connection. I can't find anywhere that shows designs or standards for this though. Or anyone who sells these parts. Also I don't want to use a gas magazine as I have custom magazines and guns. Cheers. 

Topic by TrevorB42    |  last reply


Facebook Connection

Hi guys, I think I might need a little help linking my instructables to my facebook.  I have tried using the button several times, 10 I think, and I have made sure I carefully put in the username and the password correctly, but whenever I click sign in it always gives me a blank screen?  Anyone else having the same problem, and does anyone know of a solution or a different way to connect the instructables and facebook accounts?  Or is my facebook connected and I just cant tell because of the blank screen?  When I log onto facebook seperatly it doesn't show in any way that I am connected to instructables.  All of your answers would be helpful.  Thanks!

Topic by NathanaelScheffler  


gps connections

I need to know how to connect a gnss receiver to one specific transmitter to pinpoint its exact location.  If the gnss receiver wont pinpoint the transmitter location I am wondering if theirs another chip that a gnss receiver could use to replace the transmitter.  (If you have any chip suggestion please make sure their small).  I prefer you email me @ jrocky38@gmail.com.

Topic by ahmad2013    |  last reply


INTERNET CONNECTION?

i wonder if an institution has a server what does it mean? - They have their own internet connection or who do they pay for at the end of the month? i have a modem that uses sim card let us call the mobile service providers that i use (xy). can anyone explain to me do the data connection i get come directly from (xy) servers or do i get it from somewhere else. and if( no where does it come from)if yes(who are they answerable to at the end of the month.****am a dummy i know so i dont expect am a dummy as an answer. pls anwer in a simple language

Question by mauricewarebee    |  last reply


Connect a Sketch Answered

This is a People counter, well hope to be if working.ha. Lazer across a doorway hitting a LDR. The 4 digit 7 seg display counting up 1 each time a person breaks the beam.  As of now i  have a counting sketch from the Sparkfun example. It is counting up 0 to 999 and at the same time i have an LDR reading to the serial monitor and blinking the LED on pin 13. But they are not "interacting". I am trying to get the beam breakes from the LDR to advance the count by 1 every time it is broken. In the loop function is the mills that was advancing the counting. I have changed it to   displayNumber(counter).  Among other things.But i haven't been successful in having the LDR advance the count. The sketch is still missing some "stuff". What could i change to have the counter advance by 1 every time the lazer beam is broken?    Thanks W /* 6-13-2011 Spark Fun Electronics 2011 Nathan Seidle This code is public domain but you buy me a beer if you use this and we meet someday (Beerware license). 4 digit 7 segment display: http://www.sparkfun.com/products/9483 Datasheet: http://www.sparkfun.com/datasheets/Components/LED/7-Segment/YSD-439AR6B-35.pdf This is an example of how to drive a 7 segment LED display from an ATmega without the use of current limiting resistors. This technique is very common but requires some knowledge of electronics - you do run the risk of dumping too much current through the segments and burning out parts of the display. If you use the stock code you should be ok, but be careful editing the brightness values. This code should work with all colors (red, blue, yellow, green) but the brightness will vary from one color to the next because the forward voltage drop of each color is different. This code was written and calibrated for the red color. This code will work with most Arduinos but you may want to re-route some of the pins. 7 segments 4 digits 1 colon = 12 pins required for full control */ #define ldrPin A2    // pin used for input (analog)    int digit1 = 11; //PWM Display pin 1 int digit2 = 10; //PWM Display pin 2 int digit3 = 9; //PWM Display pin 6 int digit4 = 6; //PWM Display pin 8 //Pin mapping from Arduino to the ATmega DIP28 if you need it //http://www.arduino.cc/en/Hacking/PinMapping //int ldrPin = A2; int segA = A1; //Display pin 14 int segB = 3; //Display pin 16 int segC = 4; //Display pin 13 int segD = 5; //Display pin 3 int segE = A0; //Display pin 5 int segF = 7; //Display pin 11 int segG = 8; //Display pin 15 int ldr_pinValue; int counter; int currState; int then; //int ldrpread; //int digit[4]; //int leftover; int LDR = A2;                                //analog pin to which LDR is connected, here we set it to 0 so it means A0 int LDRValue = 0;                    //that’s a variable to store LDR values int light_sensitivity = 500;  //This is the approx value of light surrounding your LDR //int digit_to_show = 0; int ldr_Pin = 0;  // LED status (0 = low, 1 = high) int inVal = 0;    // variable used to store state of input int switchOn = 725;   // value at which we switch LED on int switchOff = 550;  // value at which we switch LED off void setup() {         {     Serial.begin(9600);            //start the serial monitor with 9600 buad     pinMode(13, OUTPUT);     //we mostly use13 because there is already a built in yellow LED in arduino which shows output when 13 pin is enabled   }       pinMode(ldr_Pin, INPUT );    pinMode(segA, OUTPUT);   pinMode(segB, OUTPUT);   pinMode(segC, OUTPUT);   pinMode(segD, OUTPUT);   pinMode(segE, OUTPUT);   pinMode(segF, OUTPUT);   pinMode(segG, OUTPUT);   pinMode(digit1, OUTPUT);   pinMode(digit2, OUTPUT);   pinMode(digit3, OUTPUT);   pinMode(digit4, OUTPUT);     pinMode(13, OUTPUT); } void loop(){ {     LDRValue = analogRead(LDR);          //reads the ldr’s value through LDR which we have set to Analog input 0 “A0″     Serial.println(LDRValue);                  //prints the LDR values to serial monitor     delay(5);                                                //This is the speed by which LDR sends value to arduino     if (LDRValue < light_sensitivity)       {         digitalWrite(13, HIGH);       }     else       {         digitalWrite(13, LOW); {    if (currState() >  300) then         currState = HIGH    } else     currState = LOW //endif if currState != prevState and currState == LOW then // LOW or HIGH depending on the circuit     counter++     prevState = currState endif      //long startTime = millis();   displayNumber(counter);     //while( (millis() - startTime) < 2000) {   //displayNumber(1217);   //}   //delay(1000);    } //Given a number, we display 10:22 //After running through the 4 numbers, the display is left turned off //Display brightness //Each digit is on for a certain amount of microseconds //Then it is off until we have reached a total of 20ms for the function call //Let's assume each digit is on for 1000us //Each digit is on for 1ms, there are 4 digits, so the display is off for 16ms. //That's a ratio of 1ms to 16ms or 6.25% on time (PWM). //Let's define a variable called brightness that varies from: //5000 blindingly bright (15.7mA current draw per digit) //2000 shockingly bright (11.4mA current draw per digit) //1000 pretty bright (5.9mA) //500 normal (3mA) //200 dim but readable (1.4mA) //50 dim but readable (0.56mA) //5 dim but readable (0.31mA) //1 dim but readable in dark (0.28mA) void displayNumber(int toDisplay) { #define DISPLAY_BRIGHTNESS  500 #define DIGIT_ON  HIGH #define DIGIT_OFF  LOW   long beginTime = millis();   for(int digit = 4 ; digit > 0 ; digit--) {     //Turn on a digit for a short amount of time     switch(digit) {     case 1:       digitalWrite(digit1, DIGIT_ON);       break;     case 2:       digitalWrite(digit2, DIGIT_ON);       break;     case 3:       digitalWrite(digit3, DIGIT_ON);       break;     case 4:       digitalWrite(digit4, DIGIT_ON);       break;     }     //Turn on the right segments for this digit     lightNumber(toDisplay % 10);     toDisplay /= 10;     delayMicroseconds(DISPLAY_BRIGHTNESS);     //Display digit for fraction of a second (1us to 5000us, 500 is pretty good)     //Turn off all segments     lightNumber(10);     //Turn off all digits     digitalWrite(digit1, DIGIT_OFF);     digitalWrite(digit2, DIGIT_OFF);     digitalWrite(digit3, DIGIT_OFF);     digitalWrite(digit4, DIGIT_OFF);   }   while( (millis() - beginTime) < 10) ;   //Wait for 20ms to pass before we paint the display again } //Given a number, turns on those segments //If number == 10, then turn off number void lightNumber(int numberToDisplay) { #define SEGMENT_ON  LOW #define SEGMENT_OFF HIGH   switch (numberToDisplay){   case 0:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_ON);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_OFF);     break;   case 1:     digitalWrite(segA, SEGMENT_OFF);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_OFF);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_OFF);     break;   case 2:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_OFF);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_ON);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_ON);     break;   case 3:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_ON);     break;   case 4:     digitalWrite(segA, SEGMENT_OFF);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_OFF);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 5:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_OFF);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 6:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_OFF);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_ON);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 7:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_OFF);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_OFF);     break;   case 8:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_ON);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 9:     digitalWrite(segA, SEGMENT_ON);     digitalWrite(segB, SEGMENT_ON);     digitalWrite(segC, SEGMENT_ON);     digitalWrite(segD, SEGMENT_ON);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_ON);     digitalWrite(segG, SEGMENT_ON);     break;   case 10:     digitalWrite(segA, SEGMENT_OFF);     digitalWrite(segB, SEGMENT_OFF);     digitalWrite(segC, SEGMENT_OFF);     digitalWrite(segD, SEGMENT_OFF);     digitalWrite(segE, SEGMENT_OFF);     digitalWrite(segF, SEGMENT_OFF);     digitalWrite(segG, SEGMENT_OFF);     break;   } }

Question by WWC    |  last reply


How do I Connect Yellow and blue Rods?

I have a cube made out of Yellow rods and one made of Blue rods. Each have part of a ball machine connect to it. Is there an easy way to connect the Yellow and Blue parts? I have been trying different things, but nothing makes me happy? Can anyone help??

Question by imans314    |  last reply



How to attach a flat weight sensor to a voice recorder? What kind of sensor to use and where to buy items?

I'm making a prototype the size of a door mat that when stepped on plays a voice recording. What kind of sensor would I use and how could I make it activate a voice recording (it needs to be flat)? Where might I buy the needed items? The sensor would need to be activated after 1lb of pressure was applied to it.?

Question by mrobyn22    |  last reply


how to get wireless connections with my cable modem?

I just set up phone,internet and tv with comcast through a cable connection. when i had dsl i could play my ps3 and psp or hook my laptop to my conection with wireless. since i have had this new service i cant get my other systems to recognize any connections. what do i need to do so that i can get wireless throughout my house as i did before?

Question by robinreise    |  last reply


Multiple audio input to 1 stereo output

Sounds confusing but I need to connect 7 audio players (stereo) together and have 1 stereo ouput. Without volume sliders. Each player audio need to be mixed and be heard at the only output. I was thinking on connecting all left channel together and right channel as well then connect each one to audio jacks (red/white). Can someone help? 

Topic by luisnperez    |  last reply


Music stops as soon as the solder on the 3.5 mm jack dries after application?

Well...I have been repairing headphones for about a year now...like switching drivers..changing jacks and so on..so i have fair experience with soldering...well..I have a pair of audio technica -FC700A's which as really great for the small price i paid..and so later, i exchanged the cables(which were thin as string!) with more stronger and better Sony headphone cables(my old pair)..they worked fine for few months..but now i ruined my previous jack..and bought a new gold plated one...i connected the wires correctly..left, right and common..but I have a problem with the left wire(red)..i soldered it on to the point but the sound plays only when the solder is wet(or hot or still gooey)..as sson as the solder dries(cools down) the sound stops...i dont know what im doing wrong..is it dirt in the solder? or some gap? please help..im stuck!! Thanks..

Question by SashiShrestha    |  last reply


Connect PC to old(ish) Projector: Connection

Hey, I got an old projector from my school from my school recently, that has a video in, and i have managed to make it wok with my DVD player. My question now is, is it  possible to connect it to my computer? It only has One RCA  (Actually, I'm not sure its called RCA. The cable that plugs into it looks like this http://www.darlingtoncomputerrepairs.co.uk/images/so123447.jpg) video in cable. I was wondering if this http://www.amazon.com/Sabrent-PC-TV-Converter-Box/dp/B002CMAW20/ref=sr_1_6?s=electronics&ie;=UTF8&qid;=1324852028&sr;=1-6 would work? Does anyone know please? Thanks in advance

Topic by schumi23    |  last reply


IC connection with Arduino .

How to connect IC L298n with Arduino ??

Topic by manjusulagna154    |  last reply


Connection terminal annoyances?

I bought a tiny remote controlled helicoptor that connects to the controller to charge up, but where it joins up doesn't have a good connection and it doesn't charge well because of it, what would you recommend? The picture is the exact same one as I have.

Question by Kryptonite  


connect PSP to computer?

I got a quick question. Is there a way to connect a PSP to a computer to share the internet connection? Like establish an adhoc connection or something or do i need a wireless router. Also is there a way to put games onto a psp without using a custom firmware.

Topic by thematthatter    |  last reply


Transformers connected in reverse

Hi can a transformer connected in reverse. if 230v to 12v transformer is connected in reverse,. will it generate around 230v Just some silly doubt. Actually i was trying to find a step up transformer.. which converts 6v to 24v. what exactly its called.

Topic by nominds    |  last reply


Laptop Keyboard Connection

Does anybody know how a laptop keyboard connects to the laptop? I'm having some trouble finding out. Also, more importantly, is there a way to convert this connection to USB or PS/2? I'm thinking about an awesome keyboard mod... so any help is greatly appreciated.

Topic by bomberman3    |  last reply


bridging my connections

I need help bridging my connections. everytime i try it says i must select two LAN connections that are not using internet connected sharing. i have looked all over and am pretty sure its all off, it wont let memerge the two together by highlighting them either it just moves the connection order around please please help. thank yoou!!!?

Question by RECONWARRIOR    |  last reply


Connection to Laser 5mW

Hello, I wanted to ask you guys where should connect +3V and ground from this laser pointer assemly, I have 10 of these lying around. So please tell me where I should connect +ve and -ve

Topic by atwajid123    |  last reply


Connection via mobile

Hi guys How to connect orange pi 1with android mobile via vnc app

Question by Mr Qatanani  


"unable to connect" screen

I have attempted to sign up for Pro membership from 2 different locations but when I push the Pro Membership button I am directed to a "unable to connect" screen. Any idea's why? Suggestions on what I could try or is it on your end?

Topic by jetringer51    |  last reply


Laptop will not connect to server?

Windows diagnostic says WiFi doesn't have valid IP configuration.  IPads and Kindle work fine.  Was using it, shut it down, went back later and couldn't connect.  It also says that my device is connected but may not be able to access anything on network which I can't.  It also says to verify the network security key.  I checked and it is the right password.  FYI I am not computer savvy.  

Question by PeggyS56    |  last reply


Connecting the Arduino to the Matlab

Hello I am a student electronic engineering I'm working on a project (the ball - on - plate) and I am having trouble connecting Arduino with matlab please help

Topic by aljaur  


connecting laptop screens?

I have several old laptop screens and I would like to connect them together to show movies in my mancave using a dvd player is this possible

Question by 69olds    |  last reply


antenna for wireless connection?

I would like to improve the signal from our modem.  (serviced by centurylink)

Question by MizDaizy    |  last reply


connecting via facebook

I wont be able to log on via facebook. tried everything and nothing works

Topic by mizka90  


Pararel connection Transformer

i want to combine two of 10 ampere Trafo, so i can have 20 Ampere power supply  i read a few article that say if we connect the sekunder(secondary) of identical Transformer in pararel, we can have a double time current flow on this connection. do anybody have try this before?

Question by beatobe    |  last reply


Wireless connection problems

I bought a new wireless card for my computer and i can find my network but it refreshes every 5 seconds or so, so i cant connect because it times out. any ideas?

Question by gantyman    |  last reply


TI-connect for calculator

I'm having trouble loading "TI-connect" on my mac so that I can write programs for the ti-84 on the computer. After downloading ti-connect, I click on it, and it seems to want to install it again. I've done the complete loop, repeating the download process about 4 times.  Do any of you know what to do?

Topic by Toga_Dan    |  last reply


connect xbee to webcam? Answered

Hi im dng a project on traffic control system on emergency lane using image processing.Im done with the image processing part..now i don't know on how to connect xbee transmitter to webcam..can any1 help me

Question by esanthana    |  last reply


connections AC motor ? Answered

  Dear  All... I have an Ac motor FASCO  no. 7160-0276   3wire:  Back ( com.) Red (start) white(run)  But unfortunate can not find this model on internet, So Could you help me to connection this motor with schema if must used with capacitor please tell me how value (mf)of  the capacitor Please.Thank you very much for your time.

Question by lam.huuminh.3    |  last reply


Wireless connection issue

Hi there, I'm having a huge problem connecting my desktop pc to the new wireless network at my home. I can connect via laptop and iphone but just not via my desktop that is using a wireless USB adapter. What can I do to solve this problem? What information do you need for anyone to be able to be able to help.  Look forward to any help

Topic by Nzginga    |  last reply


Connecting a piezo lighter...?

I should solder 2 wires... one contact can be easily seen, but the other one seems to be... the black plastic???

Question by lllalllo    |  last reply


Arm tendon connection. Answered

If your arm's tendon was connected to point 2 instead of 1, then wouldn't we be like 3-4 times stronger than we are now? A bit like C-3PO in Star wars. Look at a picture of his arms.

Question by Millawi Legend    |  last reply


Wireless speaker connection?

How can i replace the wire between my laptop and woofer, with a wireless alternative, so that i can play music from wherever i want at home ?

Question by sunboy89    |  last reply


Internet connection in Greece?

 I'm in a family thats just bought a house on an island in Greece for use in the sommer. We would like to be able to connect to the internet from there, but we don't speak their language and don't know where to start looking? Is it possible to get some sort of 3g subscription, which you can pay for as u use it, or would it be better to get a cable let out? Any ideas?

Question by bjarkethomsen