Covering

I am building a Sig Tiger rubber band-powered model. I know it's wimpy, but I don't have a budget for anything larger, or a place to fly it. My question is if anyone has experience with model airplane covering. Specifically, I read an article in an old RC Modeler magazine that said plastic wrap, attached with a glue stick, made excellent covering for light models, but that Monokote and Ultrakote will crush light balsa models when it shrinks. Has anyone ever tried this? I'm supposed to use tissue, according to the plans, but ew.Also, I have an ancient U-Control Waco SRE biplane that my uncle built when he was deployed to Korea. It has an old O.S. Max III 35 that has no hope of running again, but I want to at least recover it. Any suggestions for removing old covering? It seems to be Monokote-type stuff.

Topic by CameronSS   |  last reply


Kindle cover?

How to make my own Kindle cover?

Question by AmIbovered11   |  last reply


Music covers

An example of a reasonably good song being reproduced:Prince Buster- One Step Beyond- Ska- Blue Beat 45rpmProbably better known by Madness - One Step Beyond But covered again by some Italians(?) Videoclip del 1999 della cover di One Setp beyond dei MadnessAny other favorite covers?E.g. Guns N' Roses - Live And Let Die. Original - Live and Let Die Bond sequenceAny that should never have been done?E.g. Bangles - Hazy Shade of Winter. Original uncle munkle funkleInspiration from http://www.coudal.com,,

Topic by lemonie   |  last reply


Card Game Cover

I have just made my personal set of playing cards. Could someone make an Instructabe on how to make a cover for playing cards? Thanks.I am making an instructable about it... Check it out...

Topic by blart 


Change cover picture

I want to change the picture which comes up as the cover of an -ible. So far, it is just a draft, but it shows the 1st pic i chose for step 1, BEFORE I re-arranged steps.

Topic by Toga_Dan 


underwater silicon cover

Hi everyone, I see outex.com and i'd like to make it by myself, I think it's not so difficult but I need some expertise I don't have that you can give it to me...^_^ i'd like to start from this bag,  https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcTZ2lk6Fr2qj8sAc_D6bZkRBepK17dzmUvUBjOJBTeNbH8P8Fp1RA cut it and mold some pieces to fit the Camera size and shape, do you know how to make waterproof seams on this material? hot,glue or what to make it impermeable? hope you can help me and make my next holydays great with underwater shoots!

Topic by cavalars 


Book cover Hinge

Hey all. First time poster here (second attempt, since Instructables stopped responding the first time) so hopefully I am posting in the appropriate place. I have in mind a leather-book-style cover for my tablet that I'm very excited to work on. However, I would like to use friction or torque hinges to position the cover at any angle  from the spine in a 180 degree radius and have it stay there, similar to the screen of a laptop rotating around the hinge. I've included a picture that shows the basic design that I'm aiming for, though the hinge itself doesn't need to be ornate. Unfortunately, I don't really know where to find such a thing. I've looked on various furniture hardware sites and taken a trip to the local hardware/home improvement stores, but I haven't found anything that matches what I'm looking for. Common small brass butt hinges would be ideal if they had friction/torque properties to them, but I can't seem to find anything like that. I've never looked for specific hinges before though, so for all I know they've been right in front of my and I didn't realize what they were. Does anyone know where I can find such hinges, or can someone offer up an alternative solution? Perhaps there is a way to add friction to simple hinges bought from a hardware store. Thanks in advance for pointers/advice.

Topic by wireframewolf   |  last reply


Timing chain cover

I have a 97 dodge dakota and I need a new timing chain cover. On-line purchases are out of the question because I'm short on time and cash. I will be going to pick n pull to get a replacement but they currently only have years 91, 92, 93, 95, and 99. My question is this, how do i find out how similar any of these other covers are, short of driving all the way to the yard and inspecting each one. does anyone know off hand how interchangeable this piece is?

Topic by danjamesardoin   |  last reply


DIY book covers

Hi, I'm working on a project- making a DIY book cover. I've figured out how to assembe the book already but the cover baffles me. How can I deboss the cover with foil so that the lettering(title) will be on the cloth cover? I was thinking about using black book cloth, or leatherette, but I just don't know how to depress the lettering of the title onto the front cover or the spine itself. Any ideas?

Topic by BookMaiden   |  last reply


DIY Book Cover

Hi everyone, I'm working on a project- making a DIY book cover. I've figured out how to assemble the book already but the cover baffles me. How can I deboss the cover with foil so that the lettering(title) will be on the cloth cover? I was thinking about using black book cloth, or leatherette, but I just don't know how to depress the lettering of the title onto the front cover or the spine itself. Any ideas? Thanks!

Topic by BookMaiden   |  last reply


dome canvas cover

Anyone can explain how to sew a fiting canvas cover for a dome shape?

Topic by toot.sweet   |  last reply


Chocolate covered raisins

Does anybody know of a recipe for chocolate covered raisins. Also does it have anything to do with fondue?

Topic by Easy Button   |  last reply


Mechanical Cover Flow

I was thinking of a project for a type of shelf for your CD jewel cases. It would be a way of presenting CD covers in a similar way to iTunes 7's cover flow. (see http://upload.wikimedia.org/wikipedia/en/a/aa/CoverFlow_Screenshot.png) You could mount the cases and have a slider to flip through your CDs. Anyone know how this could be achieved?

Topic by spinach_dip   |  last reply


Mechanical Cover Flow

I was thinking of a project for a type of shelf for your CD jewel cases. It would be a way of presenting CD covers in a similar way to iTunes 7's cover flow. (see http://upload.wikimedia.org/wikipedia/en/a/aa/CoverFlow_Screenshot.png) You could mount the cases and have a slider to flip through your CDs. Anyone know how this could be achieved?

Topic by spinach_dip 


Singing Book Cover

I want to build a book cover that plays a song i chose when pressed the button. I wrote a book about our good times with my girlfriend. I have it with hard cover. I wanna add a button on it that will play the song. But I'm so new to these things and have no idea how to do it. It have to be a little slim so to keep the esthetics. Anyone can help me with that ?

Topic by Morfildor   |  last reply


Removing Humbucker Covers

I have an ebony Epiphone Les Paul that's a couple of years old and I'm considering taking the pickup covers of of the humbuckers just so it looks different from all of the stock Les Pauls. How would I do that? I recently built my own electric guitar and I'm still in that mode where I want to customize my instruments. So far my Les Paul is completely stock. Also, if anyone else has any ideas of things I can do to customize it, I'm open to ideas. Thanks!

Topic by saxman42   |  last reply


Covering hardcover books

I've been trying to find out what I can do to make my favorite set of hardcover books match my new collector's edition that is leather bound. Apparently I have to know how to bind a book. does anyone know how to make a leather cover to go on the existing hardcover so that I don't have to tear the book apart and sew it back together page by page?!!! Perhaps there is some sort of new-fangled self-adhesive leather on the market? Anyways. Whats an easy way to make a hardcover book look like it is leather bound?

Topic by oddmuffin14   |  last reply


SXSW To BE covered by NPR

The South by Southwest music festival and conference is rapidly approaching (Mar. 16-20) and NPR Music will be there again this year, webcasting a bunch of full concerts, live online. This year, you'll be able to watch the shows with our live video stream from three shows: two official SXSW showcases and our annual NPR Music party... by Robin Hilton   The (not so missing) link....

Topic by Goodhart   |  last reply


Covering a workbench in metal

I am attempting to put a metal top on part of a wood work bench to make it more resilient.  I am planning on getting into electronics and want to make it less likely to burn . \ Any ideas on what I should use? at the moment I am thinking sheet metal, but I am worrying about toxicity ect. Maybe that is OCD but hell I am so haha. 

Topic by mbeaulieu   |  last reply


insulating radiator cover

I'm looking for suggesting for upping the r-value on top of my radiator. Every window in my apartment has a radiator underneath it. I'd like to have some plants by those windows ('cause y'know, they need light and all) but I'm concerned about heat from below drying & killing the plants. A couple of the radiators have covers, but they're metal, so no insulation there. Ceramic pots may provide some insulation, but I'd really like to lay down a layer of some kind of building insulation proper just to be safe. The question is, what kind? Batting won't work, and the foam insulation panels I've seen at the hardware store I know are a fire hazard... plus not too fond of plastic-type materials. My dad suggested something he called "thermal block" which I believe is aerated concrete panels, but which I can't find a source to purchase. I'd like to spend less than $20, preferably less than $10 on this. Please help!

Topic by timeismine   |  last reply


how to make decorative file covers?

Need 2 make decorative file covers with readily available materials

Question by    |  last reply


Need help with centring cover image. Answered

I've just published an instructable and my cover image is off centre. On the final page before publishing there is an opportunity to centre the image but it wont move. The image is centred and does show up centred on my instructable page but is off centre on all other pages, including the final publishing page. Is there a way to fix this?

Question by zimitt   |  last reply


How Do You Create An Ebook Cover ?

I'm making an ebook.  The ebook covers for Instructable ebooks look very good.  What software or online service would you recommend to make them look that good?   Example for an Instructable ebook is below. Thanks!

Topic by bigkhong   |  last reply


Whats the max size of an Instructable's cover photo (in pixels)

As the title implies, does anyone know what the max size of an Instructable's cover photo is?(in pixels). I'm trying to make an awesome cover photo but i need to know what the max size is, to do it right.

Topic by Team Dogoman RC   |  last reply


How can I prevent a envelope pillow cover from popping open on the back?

I have made two of the envelope pillow covers and on the back the opening does not lay close and flat like the picture shows.  My thought was a tight fitting pillow would cause the opening to split open but both pillows fit loose and still the opening still does not stay closed. Any ideas on what is causing the gap?  Any ideas on how to prevent it?

Question by BonesOneil   |  last reply


custom made tire cover

Last summer I bought my '07 Jeep Wrangler. The previous owner had added some stickers and a spare tire cover to make it look like he had the "Call of Duty" package. That's not my cup of tea, so I took that stuff off. I would like to add my own design to the spare tire cover. I actually have the design ready to go on Photoshop. I though maybe I could take it to a place like Staples, have it printed as a vinyl sign, and then use a strong adhesive to glue it to the old cover, on top of the Call of Duty stuff. I imagine, though, that there are probably some adjustments to this whole plan that would help things turn out better. Any advice?

Topic by Purple Chez   |  last reply


How to make a cushion cover?

Question by johiyo   |  last reply


Plexiglass as desk cover maybe

I have a large desk, 3 x 7 with an uneven top that I want to be visible. Can I cover it with plexiglass or would that get scratched? Other ideas? John R

Topic by Farmhouse   |  last reply


Protective Cover for Solar Cells? Answered

I have a commercial solar panel that has burned out cells.  I figure this is a great candidate for overhauling.  I notice that the cells are protected with what appears to be clear silicon with a clear plastic covering, Tedlar or Kevlar?  Anyone know where to get large quantity of silicon for large pour of covering?  It would appear to me that after the cells are assembled the silicon would be poured and then the plastic cover placed on top and the some sort of rolling pin or squeegy to smooth out, this would be better than plexiglas laid over the cells,  hail could hit it and not break anything.

Question by Foxtrot70   |  last reply


Glass covered solar trough?

I have seen a lot of designs for solar troughs but I have not seen any with a glass cover on them. Why not? I want to build a solar trough to heat water for the hot tub but I need it to be able to shed michigan winter snow without filling with snow and wondered if the glass would interfere with the operation

Question by Rainh2o   |  last reply


How to cover a mask with feathers? Answered

I'm making a mask similar to the one in the picture (whole head) and already have the structure of the mask planned out. What i don't know is how to attatch the feathers. What would be the best way to do this (cover the whole head)? Glue? Hand sewing? Any suggestions are helpfull.

Question by penandsword   |  last reply


Covered up page selector

I don't know if anyone else is having this problem, but sometimes when I select a topic like "Technology" for example, and the page loads, there is an orange Google search bar that covers up the page numbers at the bottom of the page so i can't look at anything but the first page. Is there something wrong with the site, or is it just me?

Topic by nuketz   |  last reply


Trouble with cover images for Instructables

I have been recently seeing this problem. Whenever I click an image upside down on my phone and edit it to flip to normal, it gets corrected and comes in the correct orientation. After uploading the image on the editor, everything looks fine, even after saving the changes, but after refreshing the page after a while, the cover image again flips upside down. If anyone has solution, kindly look into this issue.

Topic by KushagraK7   |  last reply


Covering up computer vents?

My computer has these vents on the case that are blowing out cold air while my expansion slot vent is blowing out VERY hot air. I was thinking I could cover up the vents that are blowing out the cold air which is very cold so I could make the inside of my comp cold so my video card doesn't get as hot. Is this a good idea?

Topic by emuman4evr   |  last reply


Beautiful Crystal Covered Apartment

Copper-sulfate crystals are lovely with their rich blue color. So lovely that artist Roger Hiorn completely covered the inside of an apartment in London with them. This was done by sealing it and pumping in 75,000 liters of supersaturated solution. After it had cooled and been drained off, the doors have been opened for visitors to come in two or three at a time. This can only be done since the apartment was set to be demolished. Stop by before it closes on Nov. 30 and gets destroyed. Link

Topic by fungus amungus   |  last reply


Tyvek slip covers/seats.

Hey, has anybody thought of this? I was thinking of a directors/folding chair type thing. Homemade tyvek (ala carryology) prefered.

Topic by moneyfuskie935   |  last reply


Camera bag insert covering

As I didn't want to spend extra money on a new camera bag I'm using an existing bag with a divider I've made from cardboard and an old camping roll mat. My question is I want to wrap it in something so it looks a bit cleaner and add an extra layer of waterproofing. I was thinking about using the material from an old tent but was concerned about condensation build up. I live in the UK so not much chance of weather! Please share any ideas. Oh and yes I will be replacing that tape for something a little more grey.

Topic by SmilerSmiles   |  last reply


Cover/Thumbnail Image not changing

I started my instruct able a while back with the a random first image that I used as the thumbnail for the entire instruct able. However, after coming back to the instruct able and creating a new thumbnail image the original thumbnail image stayed. I even deleted that thumbnail image from my image library yet it still shows up as the thumbnail when you search for my instruct able on the website.  I want to change the image you see when you search "Night Bike 2.0 by Adobi" from the one it currently has to the one below. Thanks!

Topic by Adobi   |  last reply


Automatic window cover motor

I have a problem in my apartment with an outdoor light right outside my window. If i dont close my curtains at night my room pretty much looks like daylight. I like to wake up to the sun though so I started looking at automatic curtain openers, saw the price and decided it cant be that hard to diy. My idea is to have a curtain that rolls up rather then goes to the side. I am trying to think of a way to make this simple cheap and quiet. really all I need is a rod and fairly quiet motor that I can plug into a wall. I was thinking a rotisserie motor would be pretty good but have never been near one to hear how loud they are. It might solve the problem of a rod as well depending on how long of a stick I can get for it. Anyone have any other ideas of a better way to do this?

Topic by iamme9182   |  last reply


Esquire's e-Ink cover

A friend writes:If anyone is interested in hacking the E-Ink version of the October issue of Esquire, here's some info. First, it's not available everywhere, but just in major stores like Borders and Barnes & Nobel. I got one at the Emeryville Borders. They have a display rack full of them.After removing the paper, tape, printed plastic and foam padding, here's what's left: (see pic)The PCB has 6 (!) 3V lithium batteries. It looks like one poweres the control electronics and the other five give 15 volts to run the displays. There's a PIC12F629 and some pads for in-circuit programming. There's also a couple of 4094 8 bit shift registers. There are two E-Ink display panels, but they're not general-purpose dot matrix. They have a small number of pre-patterned regions that can be made black or white. If you disconnect a panel from the circuit, the panel remains in its last state.It might be possible to open up a panel and put a different pattern underneath it (say, with a PCB). Might be fun.The PCB could be useful even without the E-Ink displays. You could connect a bunch of LEDs to it and reprogram the PIC. Not bad for $5.99 plus tax.I did later tear open one of the two display panels. You can remove the aluminum backing to reveal the connections printed in cunductive paint on the back of a pattern in conductive plastic. Trying to peel the conductive plastic away from the E-Ink active layer destroys the display, and releasing a tiny amount of E-Ink dust.It does look like one could cut the display into small pieces to possibly make small separate indicators. You'd need to retain the edge that connects to the clear conductive plastic on the front of the display.

Topic by rachel   |  last reply


Contest entry cover image doesn't update after edit

Hi, I have an entry in 3 contests. After I changed the cover image and published again, the cover image in 2 of the contests updated but one of them always shows the old cover image. Does anyone know why? Is there anything on my part can be done to make it happen? Here is the contest entry and the contest that doesn't update its cover iamge: https://www.instructables.com/id/Crock-pot-cows-milk-gingurt-vs-breast-milk-gingurt/

Topic by babybayrs   |  last reply


How do I screw the fan cover back on my pc?

How do I screw the fan cover back on my pc when I have to align and hold the fan in place at the same time. Is there a trick to this?

Question by    |  last reply


Is it possible to you to print my own design on a white duvet cover ?

Hello, I have a project and I was wondering if you are able to do it. I want to make my own duvet covers, with my own print on it. It will be a simple white duvet cover, with a simple black print on it. For the size, it has to fit to a standard two people bed. Are you able to do it ?

Question by marcoluciano   |  last reply


What material could I use to make a replacement cover for a ring binder?

I have a small ring binder that had the front cover torn off. The rings are still good, and there's plenty of paper, so I want to replace it. I use it to keep my geocaching notes in, so cardboard or fabric are not options. I'd like something with similar properties to the original vinyl-covered cardboard. It is held on by two rivets. Suggestions?

Question by CameronSS   |  last reply


domed screened pool cover plans using poly water pipes for support?

Installing an above ground pool, but need an inexpensive way to keep bugs and leaves out.  Also, since I am 70 also need something lightweight that I can build.   Has anyone built or have plans for a structure  using the white water pipes as rafters. 

Question by cararta   |  last reply


LCD TV cover instructable? (I thought I saw one, can't find it.)

My boyfriend and I just got a new TV and I don't want to stare at it constantly when we're not using it because it's quite large. :P I know I saw an instructable for a cloth cover, but after 10 minutes of searching I'd had no luck finding it. Anyone have a link to it? :D

Topic by jessyratfink   |  last reply


I tore the plastic cover stuff off my binder, how can i fix it?

So I got really mad and tore it off and I wanna fix it to make it look cool for school, so how can I?

Question by Cupcakes4lif   |  last reply


Anybody tried to dismount sealed lead acid batteries?

Hi My battery started to leak between bottom base and top cover (check pic). Just wondering anybody removed top cover? I know, you can remove top plate in order to add ionising water etc, but the actual top base? Thanks

Topic by Extasy   |  last reply


How do I make an attractive toilet paper shield to keep my 7 cats from shredding my TP?

Please don't tell me to "turn the roll around" or to lock the cats out of the bathroom. These are not feasible. The kitties shread the roll no matter position it is in, and we've got one litter box that MUST be in the bathroom. I have 7 cats, and they need a box in almost every room in the house. I've been keeping the current roll in the cabinet, but I'm getting pretty sick of having to hide the roll every time I go to the bathroom. There has to be a better way. I want ideas on how to make a simple, attractive, and durable cover for the toilet paper roll. I'm almost ready to go out and buy a commercial cover, but I think they are hideous -- great gargantuan hunks of plastic. Much thanks for ideas... Jamie, Boots, Mousie, Minnie, Domino, Beaners, Choppy, and Winston

Question by lotussutra   |  last reply


Would like to make something different to cover the septic tank covers?

We thourght about the Easter Island statues but not sure how. Chicken wire, paper mache and concrete mixed with vermiculite to make it lighter any ideas?

Question by barsue   |  last reply