Blowgun Darts

I made a blowgun, and stuffed some tissue paper, then some rocks, and then some more tissue paper to make a kind of shotgun when blown. However, air kept leaking through, and I was wondering if there was any way to make a shotgun paper dart.

Topic by Batryn 10 years ago  |  last reply 10 years ago


Poison darts

I am working on a dart that goes with a half inch cpvc blow gun that can deliver a lethal amount of poison. I am working on a poison as well but being 12 it is hard to get the right stuff.

Topic by Pbyrd 11 years ago  |  last reply 11 years ago


NERF DART TAG

I just found out something with the new Nerf Dart Tag Darts! they work with most clip system Nerf guns, which means more of a variety of Nerf guns to chose from for Dart Tag games! other than the Quick 16, Swarmfire, Sharp Shot, or other dart tag guns.

Topic by AirsoftTeam 7 years ago


moding stock darts

Does anyone know how to mod a stok nerf dart

Topic by suberban warior 11 years ago  |  last reply 11 years ago


losing nerf darts

Any one have any suggestions on how not to lose darts? cuz i just hate that!

Topic by nerfer192 11 years ago  |  last reply 3 years ago


Hunting darts for blowguns

OK so I just bought the cold steel blowgun and it's awesome. they have an great number of darts for hunting but i was wondering about a custom head design. i saw some great for a bow that i thought could be made to work with my blow gun. anyone see these guillitene heads for turkey hunting. well with a spring setup i think one could fashion something to work. the question is. Is just under 400fps enough power to make something like that work?

Topic by Jack Daniels 10 years ago  |  last reply 8 years ago


Fire blow darts?

Ive been trying forever to get some that work but I just can't! I made them out of paper and stuck match heads as the point struck them let them burn a little and try to shoot them but they go out before i can get them in pretty much they don't burn clean. I also tried hanging part of it out of the end and lighting it but that didn't work. I've tried many other things to. Any suggestions?

Topic by CowGuy 12 years ago  |  last reply 9 years ago


What Nerf bullets go the farthest? Answered

What Nerf bullets go the farthest, hurt the most and are still cheap other than stefens?   I'm open to any idea's. Thanks!

Question by THECHINABOY 8 years ago  |  last reply 8 years ago


anything nerf related

I am trying to find any Nerf guns, don't care if they are broken.  Darts, attachments, anything! I live in sw Michigan.

Topic by elliot5445 5 years ago


blowdarts

So guys and girls i have a blowgun made of an aluminum arrow that is hollowed out on both ends. Now the trick is to make a good dart which I am no good at. comments and links to instructables darts will be greatly appreciated. thanks

Topic by Robo Redneck 6 years ago  |  last reply 6 years ago


Stefan Making Help? Answered

I want to make stefan darts for my nerf gun but I need help on a few things first. 1. Where should I buy Foam Backing Rod (FBR)? 2. What thickness FBR should I buy? 3. About how many stefans can you make out of 1 foot of FBR? 4. What type(s) of stefans fit in clips?

Question by DBMods 8 years ago  |  last reply 8 years ago


How to mod nerf darts?

Make it being shot faster

Question by CWalker97 9 years ago  |  last reply 8 years ago


Selling Nerf Stefans (Darts)

Honestly I have just found out that instructables has a market place! Sorry for posting this as an instructable! Anyway I just copied all of this from my instructable: Hey Guys! I'm selling nerf Stefans (darts) for very cheap! Every Item is FREE SHIPPING (to the USA)! The prices are: $8 for 25, $14.50 for 50, $19 for 75, $23 for 100. If you live out of the USA pm me and we can negotiate a shipping cost. Also, if you want more than 100 bullets pm me. Buy it at FarmHobbies.Weebly.com. Thanks to TCBM on YT for the clip of it in action. EDIT: I changed the tip of the darts!!! Now they're more aerodynamic thanks to the dome of hot glue! Here's a picture of what they look like now: http://farmhobbies.weebly.com/comparison-of-new-and-old-darts.html.  I only except paypal right now, also please just buy them at the website i mentioned don't ask to pay with cash or something... ALSO I sell modified Nerf Guns just like Twisted, although I don't paint them...

Topic by Pizzapie500 9 years ago


coming soon a water proof dart

Coming soon a water proof dart

Topic by zeogeo13 12 years ago


How do you make an LED Nerf dart?

I need to make darts light up a bright green color (not just glow), and I was wondering if it's possible to use button cell batteries (I've got a lot of them) to make darts with LEDs in them (clear/green) that light up? I want the weight to be in the front of the dart, and the LED to light up the whole dart body (dart head if possible). How would I do this?

Question by MattGyver92 10 years ago  |  last reply 8 years ago


Can I make 'Dart Tag' darts compatable with 'N-Strike' blasters?

I will give best answer. I only want this so that I can play dart tag with my brother using normal blasters! Thanks, Flannel UK

Question by NatNoBrains 8 years ago  |  last reply 8 years ago


Non lethal poison blow darts???

Non lethal poison blow darts.? I was thinking about making blow darts then the topic struck me, could common natural non lethal poisons or toxins be used in blow darts. This sounds a bit vague, so heres and example: you take poison ivy leaves and either wipe the darts on the leaves or grind up the leaves then rub darts in the mix. Would this work, how effective would this be?. I am not planning on even attempting to try this, this is for informational purposes

Topic by HOMEPIE64 10 years ago  |  last reply 10 months ago


How to paint nerf sticky darts and still have them work?

I would like to "modify" my Nerf Maverick darts to make them look more "steampunky" but I would also like them to still be able to fire from said Maverick.

Question by EndlessWhite49 9 years ago  |  last reply 8 years ago


my website

Http://www.aaronsanson.co.ukhi ive recently made a new website encorporating some of the instructables on here and was wondering if anyone could visit my website and leave some comments in the guestbook to help me improve and update it. thanks parkour247www.aaronsanson.co.uk

Topic by blowgun247 10 years ago  |  last reply 10 years ago


What does 'Dart Reset' do? Answered

It says it on my ner raider clip. I will give a best answer.

Question by NatNoBrains 8 years ago  |  last reply 8 years ago


how can i make a homemade nerf dart magazine? preferably with a 10 or more dart capacity.

I broke a magazine and i only really need 1 more to replace it.  i don't want to buy a boatload of darts and magazines in a prepackaged kit to replace the busted one.

Question by b0bman 8 years ago  |  last reply 7 years ago


would you consider a knex tipped nerf dart a knex or nerf weapon? Answered

Well the question is would you consider a knex tipped nerf dart a knex or nerf weapon?

Question by mariome101 9 years ago  |  last reply 8 years ago


projectile/ranged weapons (catapult, bow and arrow, rope dart)

Discuss ranged weapons

Topic by plasmaspy 11 years ago  |  last reply 8 years ago


i took my raider apart and now the dart barely gets out of the barrel Answered

I took my raider apart and now the dart barely gets out of the barrel i took a couple pieces out and dont know where half of them go somtimes the dart doesnt even get out it looks fine inside but it doesnt work

Question by taowyman 8 years ago  |  last reply 8 years ago


co2 powered nerf gun

Well I have been working on making a co2 powered nerf gun (NITE FINDER) for a couple of weeks now, with no success. So If you could give me ideas, or just make one it would be appreciated. ~thank you~

Topic by KrispyKr33m 10 years ago  |  last reply 8 years ago


nerf

I would like for someone to make a better more lethal dart than this https://www.instructables.com/id/super-easy-nerf-dart-mod/

Topic by modaawesome 7 years ago


Where can I get chloraform and/or tranquilizer darts?

Don't ask questions on why I need this. Just know that it will ultimatly make the world a safer place for children. Where can I get my hands on some chloraform and/or tranquilizer darts?

Question by 10 years ago  |  last reply 6 years ago


I need help with nerf stefans. Anybody an expert?

Alright, so i got the backing rod, got the weights, made the darts. Now what? is there anyway i can use them without modding my nerf gun? please help!

Question by meanbean 9 years ago  |  last reply 8 years ago


What is "deadspace" in nerf? Answered

 I've heard lots of people talk about deadspace when talking about new barrels and stuff. What does this mean?

Question by sburns77 9 years ago  |  last reply 9 years ago


does anyone know of a way to make a knex gun fire nerf darts? Answered

Like maybe make a big, nerf sized barrel and have a ramrod push the inside of the nerf dart? if you do please say so. also, i would appreciate it very much if you try too.

Question by chopstx 10 years ago  |  last reply 9 years ago


how can i get my blowdart gun to fire it farther. its made of straws.? Answered

My dart gun is made of two straws and it sticks into the wall

Question by shawntherobot 10 years ago  |  last reply 10 years ago



Nerf Gun into Flamethrower??????

Anyone have an idea on how to turn a nerf gun,(any type) into a flamethrower? I've been searching for maybe modified bullets, with just a small flame source...... Comment if you have any help please.

Topic by whiskrs 8 years ago  |  last reply 8 years ago


Your favorite blowgun

Which is your favorite blowgun instructable?

Topic by Lord Of Mystra 11 years ago  |  last reply 7 years ago


Needle Rifle

I need some help. I'm making a "needle rifle" (similar to a Halo needler, only green needles and it's a rifle) for a (working) prop. I made a few drawings of needle guns I could (or could not) make (depends on If I can work out a few kinks). The one I'm farthest in development on is the weapn seen on the bottom. This is a needle rifle. I want to mod a Nerf gun to shoot green darts (hopefully illuminated by glow in the dark, LED, etc...) and APPEAR like it's shooting needles (dyed plexiglass spikes) from a wheel that spins and "regrows" (not really) needles. I need a Nerf/Air Blasters/Air Zone dart gun that is motorized, rapid fire, and loads by inserting the individual darts into the gun when opened (no clips or ammo chains- although, good idea for a different needler gun design...). So here's my question- Which gun do I use, How do I integrate it into/around the "needle wheel" thing, and does anyone know how do make Nerf darts (suction cup/tagger/sonic/whatever works is great) actually light up? If it helps, I've got a zillion of these button cell batteries that seem to be the same diameter as a standard Nerf dart...Would an LED work? Also, if anyone has any ideas for a dart gun to use for the other guns in the drawing, it would be great if I could get some help with that as well.

Topic by MattGyver92 10 years ago  |  last reply 8 years ago


What nerf gun do you think is the best? Answered

Question by yapoyo 7 years ago  |  last reply 7 years ago


how to make a spring loaded "gun" thats shoots foam darts?

Question by afrodud 9 years ago  |  last reply 8 years ago


how can i mod nerf darts for the long strike so they can shoot airsoft? Answered

im going over my friends house on the 30th and we are going to have an airsoft war and i only have $10 so i need a cheap way to do it.thanks if you submit an answer.that would be good. nfk

Question by nfk11 8 years ago  |  last reply 7 years ago


**THE K'NERF CONTEST-UPDATED**

**THIS CONTEST GOES FROM SEPTEMBER 1ST-OCTOBER 1ST. JUDGING LASTS FROM OCTOBER 1ST TO OCTOBER 15TH.** Hello K'nexers!      A few other K'nexers and I have been discussing the idea of having a Nerf-K'nex themed contest after the main Rods and Connectors contest was over. We wanted it to combine Nerf and K'nex in a way that would be useful to both Nerfers and K'nexers.             This is a contest for K'nexers and Nerfers to build Nerf-related K'nex creations. Entries can be K'nex guns that shoot Nerf darts, K'nex guns based off of Nerf guns, or both. All entries related to these things will be accepted.       TO ENTER, BUILD A NERF-RELATED K'NEX GUN AND POST IT IN A GOOD QUALITY INSTRUCTABE. PLEASE POST A LINK TO YOUR GUN BELOW TO OFFICIALLY ENTER. ----------------------------------------------------------------------------------- Rules: -All entries must be K'nex versions of Nerf guns, or Nerf dart shooting K'nex guns-or both -Pictures of Nerf gun replicated (if any) must be included. They can be from any source. -Any kind of K'nex or Nerf ammo is allowed. (Oodammo, rods, connector ammo, finnammo, wheels, gears, vortex disks, elite darts, streamline darts, suction darts, tagger darts, whistler darts, micro darts, and mega darts). --------------------------------------------------------------------------------- Judging rules: -Judges can enter if they want, but their entries will be judged by another judge. -Entries will be spilt up among judges (if there are a lot of entries). -Judges will focus on the following points when rating entries: -Picture quality.        -Nerf related?        -Does it look like the real gun?[for replicas]/shoot darts at normal Nerf range (10-30 ft/3.048m-9.144m)? [for dart-shooters] -choose one or the other if it has both. -Range+accuracy? -Visual appearance? -Overall quality? (Built with care, or just thrown together?) Judges will rate entries on a 1-10 scale for each focus. Highest score wins. Maximum score is 60 points. Scores will be reported in the comments section of each entry. They will be compiled at the end of the 6-week period. *All judges names are confidential. There are almost ten. ----------------------------------------------------------------------------------- Prizes: -Highest score; Grand Prize: Patch and/or sub from each judge, and a 2-year Pro membership. -Next three highest scores: 1st prize: sub from each judge, 1-year pro membership, patch from me. -Next three highest scores: 2nd prize: sub from each judge, 3-month pro membership. *There is no voting in this contest. -------------------------------------------------------------------------------- I really hope this works out! If you have any questions feel free to ask or PM nerfrocketeer! {Pictures-Excluding Intro} These are examples of things you can enter. 1) My K'nerf Jolt 2) My K'nerf Reflex 3) My K'nerf gun, the Thing 4) Blue Mullet's Nerf Stampede 5) Metalsonic's Zombie Slayer (like a Nerf ZombieStrike Sledgefire) *Special thanks to Mike for his help and prizes. We K'nexers/Nerfers are NOT affiliated with Nerf, Hasbro, or K'nex. 

Topic by nerfrocketeer 5 years ago  |  last reply 5 years ago


What would be a good alloy/ dimensions for an aluminum blowgun?

I would like to order an aluminum tube from McMasters.com but I'm not sure of what kind I should get for a blowgun.  If you could put in the dimensions you would get for a blowgun at http://www.mcmaster.com/#aluminum/=7mdkul that would be great, thank you.  The only set thing I need for the tube is for it to be less than a .50 cal blowgun... If you could tell me if this would be good for a blowgun that would be great: http://www.mcmaster.com/#aluminum/=7mdm28                                                                                                                       Thanks,                                                                                                                         Wafflicious

Question by Wafflicious 8 years ago  |  last reply 8 years ago


im selling a modified nerf maverick it is a shorty maverick singgled and comes with 15 stefan darts

The gun comes with 15 stefan darts shoots at about 50 ft cash or check only bidding ends june 12 just say how much you are offering oh and i do trade nerf guns bid starts at 10 dollers happy bidding i will make a fourm soon with picture

Topic by jonessodanerf 10 years ago


Spider Man Web Slingers Idea

This is the first idea that I have worked up the courage to post and I would like some help getting my ducks in a row. I don't have anything written down yet so here is a verbal breakdown of its function: A retractable tape measure mechanism is attached to a length of cord. This mechanism is, in turn, placed in a sealed chamber with a barrel wide enough to accommodate smooth movement of the cord. The free end of the chord is attached to a dart/wadding that is used to block the chamber from the outside. Pressurized CO2 or equivalent gas is pumped into the chamber using a pressure nozzle with a emergency release valve. CO2 is pumped into the chamber, dart/wadding is fired, dart/wadding and cord pass through the barrel till loss of velocity or reaching the end of the chord, the mechanism pulls the cord and dart/wadding back to start and the process repeats. this is just an idea and I would like some help getting it functional, and an equation for thrust vs drag would be nice :D

Topic by mad_mechanic 6 years ago  |  last reply 5 years ago


Looking for Nerf Raider CS-35 mods that WILL NOT shoot nerf darts.

Hey, I'm wondering if anyone knows of mods for the Nerf Raider that don't fire Nerf darts.  I've modded a few nerf guns, but I'd like to repurpose my raider to shoot something else.  I'm looking to make it like an airsoft gun or rocket launcher-type gun.  Any and all suggestioins are appreciated. Thanks!

Topic by TacticalTrumpet 7 years ago


Plunger Launcher

Who never wished they had a good plunger launcher? You could use the standard 'dart gun " mechanism but make it bigger. Eh! Steve

Topic by iamthemeatball 11 years ago


How can I speed up the rate of fire on a nerf swarmfire?

I recently purchased a nerf swarmfire. It is fully automatic. It holds twenty darts when full, and empties all of its barrels in about 6.4 seconds. Thus it fires one dart every 0.32 seconds. I'm in a club where rate of fire basically determines the winner of every battle, so an ible about how to speed this up would be appreciated.

Question by bokrugthewaterlizard 7 years ago


I Mded my gun and my cocking mechanism was screwed up. BTW: I have the Nerf Dart Tag Blaster. (10 Shot) Can Anyone help?

 The part of the gun that you pull back falls if I move the gun.

Question by Pinguin 9 years ago  |  last reply 8 years ago


my nerf guns

Check out my nerf guns and darts please comment and tell me about any mistakes i made and my feet are in pic 2

Topic by nerfer192 11 years ago  |  last reply 11 years ago


problem nerf

My nerf longshot has a problem when I load a dart it fires good but the next one barely falls out of the barrel. please help.

Topic by SorryBarry 10 years ago  |  last reply 10 years ago


Is there any way to mod an Air Blasters Tommy 20 to keep it from jamming? Answered

Okay, I recently bought a Tommy 20 (what was I thinking?) to decorate/mod and make a "needle rifle" out of it with green LED darts (haven't made any designs for those yet) and so I took it home and tested it out. The results almost made me cry. But I figured that I could find a way to fix my problems. I opened it up (my dad doesn't know, shhhh!!!! It's my gun anyway), and I wrapped rubber bands around the drive wheels. It helped a little, but I'm still having problems. The darts aren't being pushed out of the holder far enough, and the ones that don't catch end up getting stuck and causing a huge jam up. Is there anything I can do to the mechanism that pushes these wretched darts forward push farther? Is there a cut I can make in the plastic that lets the darts not jam up? Should I keep the rubber bands on, or even-glue them on? What should I do (I just want it to shoot and not jam-I could care less about accuracy).

Question by MattGyver92 10 years ago  |  last reply 9 years ago


nerf gun mod

Can some people join me in the quest to moddify nerf guns?, add better springs, darts, and paint, things like that, pleas join me!

Topic by knuckel 9 years ago  |  last reply 8 years ago