What to do with a bricked all-in-one pc?

I have a bricked Dell Studio 19 All-In-One PC, and wanted to know if I could use it for something. It was bricked by a failed BIOS update. There was a program from dell which came installed and updated any other of their software and drivers on the computer. Only after the failed update I found out that updating the BIOS is really unnecessary. The only fix I know for the motherboard is replacing it, and the only place I found out that refurbishes them are from a company in the US, and it's not cheap at all. (I used to live in the US, and moved to Brazil later) Well anyway, I wanted to know if I can use the computer for something else, like use the monitor for a different computer and use its bluetooth mouse and keyboard on a different computer too. I think the only thing really useful in it is the processor which is already old (Intel E7500 and a 320GB HDD). http://www.dell.com/us/dfh/p/studio-one-19/pd http://www.dell.com/support/home/us/en/04/product-support/product/studio-one-19/diagnose Thanks for the help!

Topic by nickfaraujo 3 years ago  |  last reply 3 years ago


All in One Keyboard ? Answered

Is it possible to combine all these features in one unit.  i)    Keyboard,  ii)    Touchpad/Trackball,  iii)    FingerPrint Reader,  iv)    Microphone,  v)    Speaker,  vi)    Card Reader,  vii)    IR,BT(optional).

Question by FAisalShafi 7 years ago  |  last reply 7 years ago


A do-it-all-in-one-cable For laptops(an idea) Using the ATX 24...

I just recently got an idea,its kind of an ingenious(well i think so) idea.ITs a do-it-all-in-one cable,a cable that connects to your laptops s-video,rca,vga,sound,and even usb through one cable using CAT5 cable for it(If cat5 contains enough cables in it)The cable at both ends will have the ATX 24 pin connector that connects to a project box,but thats another part,we will get to that laterS-Video ---------- 3 Data 1 common groundRCA ---------------- 1 Data 1 common groundVGA ---------------- 5 Data 3 common groundUSB --------------- 2 Data 1 5V 1 common groundSound ------------ 2 Data 1 Common groundGrand total = 15-mixing grounds/ 19 - separate groundsSo according to that,i would need 2 and a half CAT5 Cables(if i use separate grounds),which i am going to squish together into one big cable.Or 2 CAT5 cables (if i mix all of the grounds)Now,i would have all of the cables squished together into some tubing(heat shrink?,no too expensive in such a large amount)with the ATX 24 pin connector at each end.Now,the project box,it will have the opposite connector(the one that the other connector connects to) will go into a box with that connector soldered on a breadboard inside of it(i could get the connector from a computer,or 2(i have 2 fried motherboards so ...))and in the other side of the (plastic)box would be all of the connectors(Sound connector,VGA,Svideo,RCA,usb(maybe for IR receiver or something))that connects to the TV,or monitor.The other end with the same connector would connect to the laptop,it would have VGA,RCA or SVideo,Sound,and USBSo now that i got my point out,what do you think?That the all-in-one cable,or a bunch of tangled cables just to put video and sound to the tv,and that is without USB,whats the fun of not having a usb connector from your laptop 20 feet away from you,you could connect a web cam,to see yourself on the tv,or a ir receiver,to control the pc without a keyboard and mouse,or whatever else you can think of.So...what do you think(poin tout any mistakes i have made by chance)So...comment...or whateveri think this would be pretty nifty,no?

Topic by ReCreate 10 years ago  |  last reply 10 years ago


Led on in sequence one by one

I want to make a circuit to turn on all led one by one. I tried to do it with 4017 . But that ic turn off the previous led but i want to tun on all led one by bye in sequence.

Topic by HoneyS26 11 months ago  |  last reply 8 months ago


How do you meet people in the "comunity?"?

I want to meet people in the comunity like me that I can E-Mail

Question by anth101 9 years ago  |  last reply 9 years ago


Use scanner only on a Canon MP140 Printer

Hey everyone, I had a great idea to take a non working all-in-one Canon Pixma MP140 printer, remove the non working printer part and use only the working upper tray with the scanner. How complicated can this be? Not as straight forward as I thought. The scanner worked great before I took the printer apart. I removed all the plastic, metal bars and cartridges and thought that with a bit of tweaking it'll work. Hell, at this point I need devine intervention, or at least a knowledgeable instructables member... Right now when I turn it on (I don't know what to call it anymore a scanner or a printer) the power and the alarm LEDs blink with the 7-segment display showing E...2...6... and I can't scan. The following procedure changes the indication, but the end result is the same: •Turn off the printer •Hold the Resume Button (red circle in the triangle), click “Power” which will turn green. •Hold the Power Button, release the Resume Button. •Not releasing the Power Button, double click “Resume” and release Both Buttons. •Click “Resume” for Four times •Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again. and I can't scan. I fiddled a bit with a wire innocently thinking it'll do the trick.... somehow... but ended up accidently touching the part that connects the scanner white data cables to the PCB. It sparked and the scanner turned OFF. I'm afraid that might have caused the E26 error that I found indicated: Internal temperature rise error. Any ideas?

Topic by Mr.Bahur 7 years ago  |  last reply 4 years ago


List all Instrucatbles on one page?

Is there a way to view/list all of my Instructables on one page?

Question by Plusea 10 years ago  |  last reply 10 years ago


We must keep the Allsteps preference!

The title says it all, Allsteps should be a benefit when we register, Now we are going being treated like dirt by the system! We are being removed of all the basic features! What do you think about this happening? Do you think it is fair? do you think it Should be done? And do you think madness will occur when it takes effect?

Topic by ReCreate 9 years ago  |  last reply 9 years ago


View all steps on one page

I've noticed that even when i'm not logged in i can still view all steps on one page, so whats the point of it being there ??? Cant it always be on one page? Instead of every time i go on an Instructable i have to click on 'view all steps on one page' Then to get back, i have to click back twice its just realy anoying... :/ Browser: Google Chrome Software: Vista

Topic by flerkster 7 years ago  |  last reply 7 years ago


To All Instructablonians!

Do you know the answer to this rhetorical question?

Topic by Labot2001 9 years ago  |  last reply 9 years ago


What do I do with all this cable?

So my dad often brings home scrap wood and the sort from his job but recently he has been doing something or other with stainless steel cable, cutting it up for whatever. Anyway, I now find myself with at least 50 pieces of this high quality stainless steel cable that is just thinner than what I have to tie out my dog. I'm not sure what size it is, but I counted around 20 strands on one of the frayed cuts. It all averages about 4-5 feet, but it ranges from a few 1 foot sections to quite a few ~6 feet sections.  I would love to find a way to put this all to use in a clever way, but who knows how long it might be before I think of something myself? My first instinct: Ask Instructables! If you have any ideas at all, please leave a comment as to what I might do with this. I'm going to ask my friends as well but I bet some of the more experienced people here might have some good suggestions.  Something I would like to know is what is the best way to link these together, if I want something longer?  Any suggestions welcome, thanks. 

Topic by cart562 6 years ago


All Steps

Has anyone else noticed that if you go to the address of an instructable(url?) and type in "?ALLSTEPS" after the address, you can veiw all steps on one page without ever having to log on?

Topic by Rye 10 years ago  |  last reply 10 years ago


all in one box aquarium feeder

Hi you all, I like to ask you ,what do you think i can improve on my project ? https://www.instructables.com/id/The-all-in-one-box-aquarium-feeder/ its my first instructable ever, also is there anyone who tried making my idea ?

Topic by Brian from Belgium 4 years ago  |  last reply 4 years ago


all in one complete laundry sheets

I've been using those Purex all in one - detergent, fabric softener, dryer sheet - in my High efficiency front loader.  When those sheets come out of the dryer, they look like they could be reused.  Any ideas how to make my own "refill" products and how to do it? tHANKS!

Topic by opentoedshoesan 8 years ago  |  last reply 8 years ago


All things to do with Contests

I noticed that the contests are only available in some countries and I was wondering if they could be extended to other countries like Malaysia, Japan, South Korea, Indonesia, Vietnam, Singapore, Thailand and others.

Topic by BenderSanchez 3 years ago  |  last reply 3 years ago


what to do with all this denim?

I was cleaning out my closet when i realized how many jeans i have collected over time but are too ripped or dont fit any more. What i want to know is if anyone has any ideas on what i can do with them. Particularly how to convert them into a cool jean jacket.

Topic by mellamokiwi 12 years ago  |  last reply 11 years ago


All photos do not show

I created an Instructable today. It contains about 15 photos. Looking at the published page I only see the first set of thumbnails. I can't scroll to uncover more. Clicking a thumbnail does not enlarge it. https://www.instructables.com/id/True-to-Scale-Landscape-On-Laser-Cutter/ Jim

Topic by jschrempp 7 years ago  |  last reply 7 years ago


ALL RECENT

Hello, what determines which new Instructables appear in the ALL RECENT page?   I've submitted 6 total, and only 1 has shown up in the ALL RECENT category.   Is it done randomly, or does the administrator pick and choose them?    I ask since those that appear on the All Recent list seem to get hundreds more views than those that do not.   I realize that some are Featured, but I'm referring to the All Recent pulldown.

Topic by John_the_Builder 5 years ago  |  last reply 5 years ago


What do you all do for a living?

Hi guys, I'm Anna, a college sophomore and I've always loved crafting. I could get into almost anything, sewing, ceramics, woodworking, drawing, 3-d art, cooking, etc. Anything where I get to use my hands. I come from a family that isn't that well off and have always thought that art and crafts would come second in my life, something that I'd do during my pass time. And maybe after I retire and have saved up enough money, I could open a craft store or a coffee shop filled with books and crafts - some combination of all the things I love. I'm a psychology and neuroscience major and plan to probably get a PhD and work at a hospital or at a research university. I love people. I think we're capable of so much.. I might just become a counselor - I don't know. This has been my plan for a while but sometimes - or most of the time- all I find myself is dreaming about making things. I'm just so afraid that it isn't something that I can depend on. I'm not guaranteed safety and stability. So I'm wondering, What are you guys doing with your life right now? Have you had a similar dilemma? Do you do arts and crafts just whenever you have free time? Do you do it for a living? Suggestions?? Thanks guys! Happy Holidays!

Topic by alam10 5 years ago  |  last reply 5 years ago


Why did you remove the "all steps on one page" for non premium users!?

I've enjoyed instructables for a LONG time now and have endured the annoyance that it is to have to sign in to view all steps on one page... Now that that's gone for non premium users I'm frankly annoyed. Why are you guys trying to FORCE me into buying a bloody membership!? You guys sell plenty of advertisements to cover the costs on here please give us non-wealthy a chance to view all the steps on a single page. I'm beginning to think they should just set up a completely separate pro website for instructables and leave us poor bastards behind but at least give us the all steps on a single page. Really unfair move guys! Change it back!

Topic by !werdna! 9 years ago  |  last reply 9 years ago


What to do with all these extra lenses? Answered

I bought a pack of lenses online from http://www.dealextreme.com/details.dx/sku.15774 for an instructable.... but all i needed was the 8mm one.... so now I have all these mini lenses and I want to do something with them! I was thinking maybe a mini solar deathray or something? any ideas?

Question by davej6694 8 years ago  |  last reply 8 years ago


"View all steps on one page" Feature doesn't work anymore

Hey everybody, I checked out the site again today, and was looking through some instructables. But unfortunately, the "View all steps on one page" button won't work anymore :( Are there any known issues with it? NrDesign

Topic by nrdesign 9 years ago  |  last reply 9 years ago


What do we do ? Answered

My friend happened to find this website        http://chelnyshops.ru/.  It shows many Instructables,but doesn't have the creater nor is there a link to Instructables.  Just wondered what all of you think.  It doesn't bother me that they want to repost it,but there is no credit to all of us.  I emailed support and they said that Instructables doesn't own our work ,so we have to deal with it on our own.  What is strange to me is that all the pictures and verbiage is on the site but no Name of the maker. Just wondering! Thank you! The Juliart

Question by The Juliart 3 years ago  |  last reply 3 years ago


Is there a console that can play all games? Answered

What i mean is a console that can play ps3/xbox360/ps2/psp/DS/GBA/wii/gamecube/n64/etc games all in one box? I think one of these could save tons of money.

Question by DJ Radio 10 years ago  |  last reply 6 years ago


auto view all steps on one page is gone? Answered

Untill like 10 minutes ago, every time i viewed an instructable, it went to everything on 1 page automatically, but just now, it didnt, so i went to change it back and it said that i'd have to be pro member for it... but i dont understand, i never was pro member, and i had it always, but now its gone?!

Question by godofal 9 years ago  |  last reply 9 years ago


can you help me?

I have a blog and would like to partner with you in the disclosure. ARTNERSHIP This will bring benefits to both sides for the development of our entertainment blog that aims generally find that their integration our team will benefit in the form of attracting pubublico are heading our blog posts and at the same time the public to visit our blog do not know if the site had come to know of you and vice versa. interest if it acts to respond to this email to discuss more about related subjects. graciously team segue sua nau

Question by trevor00 8 years ago  |  last reply 8 years ago


Registering to see all steps

Maybe this has a topic already, if so, I apologise! I think it must be new, having to register to see all steps. I don't like it! Annoying for when I'm at school and don't want to log in and just generally inconvenient. I think it might put new people off using instructables because registering just to see how to do a project is quite a turn-off. I know the service is free and I feel bad only ever making a contribution to complain! Instructables is a great site and one of my most visited, I really do love it! Anyway, just my thoughts.

Topic by unigamer 11 years ago  |  last reply 5 years ago


No one noticed

While I briefly joined in on the recent change-of-image-thing, no one ever questioned the image I chose including Kiteman , Lithium Rain and others: Are people not paying attention, or do they not care? I've formed an opinion that "another B&W / Sepia dude" looks much the same as any other... L It's a bit tricky to put a name to a face, but I think I've passed-off someone else (with a very well-known-name as Nikola Tesla without really trying) - come on who is he? - patch for the giving.

Topic by lemonie 9 years ago  |  last reply 9 years ago


How do I transmit over all FM stations in my house?

I know that I can transmit a FM station 50 feet without having any problem with laws (at lest what I have been told). But how can I transmit over all stations in that field?

Question by nfarrow 9 years ago  |  last reply 9 years ago


One bug, one inconvenience

Hey all, Instructables is an amazing website, spend a lot of time in the electronics section! Haven't had time to make my first instructable yet, but getting ready too shortly! I found two bugs, one that doesn't hinder usability but it has a huge annoyance factor, and the other is an inconvenience more or less. The first one: Ironically I found this while looking at pictures of bugs people had previously submitted in the comments of the featured bugs article. When you click on the image to view it in the light-box some of the objects on the page ALWAYS show up in front of the light-box. This makes me believe that the Z-Index is possibly set too high on those objects, haven't had a chance to play around in FireBug and propose a solution as of yet though. I have attached the screenies of this problem below. I only took screen-shots of the problem on this specific page, but rest assured it does it on every single page I have checked. I figured this pair of images is enough. Second "bug" (not so much a bug as a recommendation here): When posting in the forums I ALWAYS have to do the "Select a category group and category" step in my post. I understand that if I wasn't already inside a specific forum (category) when I clicked the new topic button it wouldn't already know where I wanted to post to, but seeing as you don't have this button until you are inside a category it should be able to fill this in for you. For example I was inside the "bugs" category in the "help" category group when I clicked the "New Topic" button, it wouldn't be too difficult to have that button pass a parameter to allow those boxes to automatically have the right selection, but keep them selectable just in case someone would want to change where it was posted. Computer 1 specs: OS: Both Ubuntu 11.10 (x86 and x64) and Windows 7 (x64) Browsers: Firefox 8.0, Chromium 15.0.874.106 (Developer Build 107270 Linux) CPU: Core 2 Duo e5700 RAM: 8 Gb GPU: NVIDIA GeForce 7300 (Driver Version 2.1.2) Computer 2 Specs (My web development machine): OS: Windows 7 SP1 (x64) and XP Pro SP3 (x86) Browsers: Firefox 9.0.1, IE 9.0.8812.16421, Chrome 16.0.912.63, Safari 5.1.2, Opera 11.60 CPU: Core i5 m520 RAM: 8Gb GPU: ATI Radeon HD 5470 I was able to replicate this issue across 3 operating systems with various levels of installed updates, and across every single common browser, updated to their latest versions for the specific operating systems. In supporting browsers using compatibility mode this problem wasn't present, but as previous posts stated paddings, menus and some other items move around the site or collapse on themselves, specifically on the front page using internet explorer. These bugs were replicated using both 32 bit and 64 bit versions of operating systems, and on 64 bit operating systems it was tested on both the 32 and 64 bit browsers.

Topic by b3ta-mann 7 years ago  |  last reply 7 years ago


How do I commit to ONE person?/?

I love him with all my heart and he has all the (well most) of the qualities I want in a man, but I just cant seem to commit my body and soul to him. My eyes and mind wander towards other men.

Question by kmckenna 10 years ago  |  last reply 10 years ago


What To Do?

I don't know what to do with all this junk I found. Well, not all of its junk, but whatever. Here's the list. -Walkie Talkies with charger -iPod USB cable(Don't have the iPod) -Speaker with wires cut -Old digital camera -Kodak Pony 135 camera -Pentax (program plus?) camera with flash, case, and three lenses. -Squire amp. If you have an idea or have a link please share.

Topic by chardster 11 years ago  |  last reply 10 years ago


Calling All Programmers (Yes, ALL)

Every now and then in typing class, our teacher will give us a handful of letters, and we're given about 5 minutes to come up with as many words as we can from these letters. So today I thought... what if there was a program where you could input a string of letters, and it would spit out as many words as possible that can be made out of those letters. A quick Google search was less than fruitful. So, to the more techier of my fellow Iblians, how would you go about writing a program that could do this? I'm thinking something where you input a string of letters, and then it scans, say, an online dictionary, to find as many words as possible from the inputted letters. Sound doable?

Topic by Labot2001 10 years ago  |  last reply 10 years ago


How do i get all instructions on one page?

On the internet I asked for a pattern for a wallet made of inner tube patterns and found this site. Tried to sign up so that I could see all steps on one page. Now I'm signed up and signed in, the pattern has disappeared. Very frustrating.   How can I find this original pattern and have it show up all on one page?

Question by jackie auman 8 years ago  |  last reply 8 years ago


How do you send an 'instructable's email' to all of your subscribers? Answered

How do you send an 'instructable's email' to all of your subscribers?

Question by robotkid249 7 years ago  |  last reply 7 years ago


Look at all the Foam!!!!

Today we started mfr for our new HPV!Due to a miscalculation... We have 15 EXTRA sheets of foam. That's about $210 worth of EXTRA foam! No one ever thought to take in to account that more than one cross section could fit on one piece of foam....The section below was the most funny - my immediate reaction to putting it on was a Squid! And look at all that foam in/on the truck!Here's More Info

Topic by trebuchet03 11 years ago  |  last reply 11 years ago


For all the dads here

Happy Father's Day! What are you all doing?

Topic by Weissensteinburg 11 years ago  |  last reply 11 years ago


Steampunk Playstation One

Last Friday I was looking through some of my old stuff when I found my old PS1. I was wanting to try doing a case mod on an old NES but i thought this could be a bit more fun. Anyway after brainstorming some ideas for designs I settled on a steampunk-like style. So far this is about all I have done. But to explain what I'm going to do to it just mouse over the pics--\/ Let me know whatcha think.

Topic by Rockerx 10 years ago  |  last reply 6 years ago


To all the archery enthusiasts

So I need some help. I have been shooting for some years now (about 4 or 5) but I still am having one problem. I am using a 70 lb. draw weight on my bow (compound bow) but when I go to shoot and I am aiming low I cant raise my arm up to get the pin on the bulls eye. (This happens when I have the bow drawn). So if any of you have an idea for something that I could do to help please comment me. I will try all ideas at this point.

Topic by Pat Sowers 11 years ago  |  last reply 10 years ago


witch is better a ps3 or 360??

Do u know witch is better? (>_<) HELP.

Question by gamefreek 10 years ago  |  last reply 9 years ago


Can I view all Instructables of a single catagory on one page?

Question by DELETED_maboy 7 years ago  |  last reply 7 years ago


What to do with this? Answered

I have this LCD and another with 41 pin connection, no main board on them only a small control one. Any project ideea is welcomed, and if you have any tips and trick how to do it .

Question by theVader75 3 years ago  |  last reply 3 years ago


What should I do with all this?

Hey everybody, I've been MIA in Ible-land for a long time now. In the meantime, some new stuff has been brewing here. Some totally awsome ibles coming, I promise! Recently I aquired at an auction: -a pallet of computers -printers -a 24" color plotter -a photocopier -a microscope on the end of a long arm with a fiberoptic light What should I do with the pallet of PCs, the photocopier, and the microscope? Obviously the photocopier is the big deal here. Copy machines have a loda of stepper motors (most w/ very high torque), lots of electronics, LEDs, high voltage power supplies, a flourescent lamp, belts, pulleys, encoders, shafts, wheels, feeders, speakers, com. chips, MCUs, RAM (good for advanced robots), lots-o-metal/plastic, and some very awsome/complex mechanisms. Pretty mush everything is in a photocopier. So help me out! maybe I'll use your idea to better mankind and destroy the oil industry! Okay maybe not, but it's a nice thought to imagine every car running on fuel cells. Give me some ideas because too many are running through my head. Things like: -Tesla coils -Rendering farms -laser scanners -CNC machines -static lifters -lamps (yeah, not the best idea) -railguns -large, 4x4 robots -trebuchets -sorting machines -combat robots -lasers -net-enabled robots -high-speed home PCs -extra misc. Also, the toner feeder leaks, that is why the copy machine doesn't work. There is a full toner cartridge though, what do I do with that? Well, give me some Ideas and I greatly appreciate it!

Topic by gimmelotsarobots 9 years ago  |  last reply 9 years ago


Chumby One

Zachninme first turned me on to the Chumby, and if you haven't heard, they're coming out with a new version called the Chumby One. It's going to cost $120 (as opposed to the classic's $200), but if you pre-order it, you can get it for $100. The new one is plastic instead of bean baggy and has a retro feel. There are a few other new features, such as a rechargeable battery compartment, as well. I ordered mine a few days ago, who else is getting one? And to any developers out there, I'd like to suggest an instructables widget! Ideally, you'd be able to view a particular instructable. Imagine being able to carry it around instead of printing out a copy/carrying a laptop. I don't know much about the limits of widgets, but if you can't search for one via the chumby, maybe you could send it to the chumby from the computer with a log on? If anybody's interested in developing that, I'll help test it once I get mine ;) Update: Apparently Ewilhelm is ahead of the game. He's already made a widget that shows recent instructables. It would still be awesome to be able to choose the instructable, however. If you don't know what a chumby is, it's an "internet appliance." A Chumby is a small box with a 3.5 inch touch screen, speakers, an accelerometer, a usb port and of course, wifi. It's mostly useless if it can't connect to the internet (either with wifi or a USB Ethernet converter) because everything you do streams from chumby.com. You set up channels of widgets (user written applications that include everything from games and internet radio to RSS feeds and sports scores). You pick a channel and it will rotate through the widgets that are on it. You can also set it to switch to certain channels at certain times (alarm clock, etc) This will be my first one, but I'm super pumped to get it. I think the reduced price lasts through the end of the month, but don't hold me to it. chumby.com

Topic by Weissensteinburg 9 years ago  |  last reply 9 years ago


Super BAG!

I am sparsh from India and i am a technology freak i am very new to Arduino. I recently lost my sisters bag (it was her favourite one! ) she still hasn't forgiven me and make up to her , im gonna get her a new one... Not only do i wanna get her a bag, i wanna get her a Super bag! This is a bag i found online.. the one i lost was leather too.. ​ I was hoping all of you would be able to help me plan the bag ... Mission : a bag that has arduino and bluetooth connection and a small screen(to show bag battery and bluetooth connection status), can connect to phone, play music through awesome speaker that is connected to super large capacity battery that can be charged via wall plug or solar panel. Same battery has a standard Indian 3 pin socket to connect laptop on the go.  Maybe some way of bag lost detection on phone when bag not connected via bluetooth. Also maybe some lights connected to the arduino that respond to music playing through the bluetooth ... i also had the idea of using a breathlyzer or some other cool utility that you can think of ... I believe a lot of this will be possible with only an arduino board and a 1sheeld . Or if you have any other ideas in mind I have saved up some money. i would like to pay any of you some if you would like to help me with this project and think that you cannot do it for free ! Otherwise id love to see the community giving in their inputs and extra add ons. Thanks Looking forward to hearing from you ... sparshbatraphotography@gmail.com

Topic by sparshenator 3 years ago  |  last reply 3 years ago


all from rosewood

If any one need rosewood for guitar manufacturing, feel free to ask me.

Topic by Deni Irawan 11 years ago  |  last reply 10 years ago


What to do with...?

I recently received two demo broiler units from my friend's dad. They both each have one broiler unit and a carbon fiber filament inside a quartz tube. (Just what my dad relayed to me from him.) What the hell should I do with these bad boys?

Question by Zem 8 years ago  |  last reply 8 years ago


ALL TERRAIN VEHICLES

ALL TERRAIN VEHICLES, ATV, are one of the most growing means of recreation. Many people ride ATV's in the mountain trails enjoying nature along the way. The scenery is really one that No TV can match either. Most people ride their ATV on forest Public  Lands which are "Managed " by forestry. ( at least they say they are....volunteers do more for the forest though) So why is it the US Government is working so hard at taking away our rights of recreating responsibly in our own lands? The USDA/USFS is attempting to close access to all forest lands making them monuments, in which case no person will be permitted to access them. If you or family or even friends recreate in the forest I highly urge you to let them know that we all need to unite in order to save these rights. Advocate in order to protect our rights to use our own lands responsibly. Education in this matter is available in many areas on the web. One place will help in many ways..... www.ouachitaatvadventureclub.org Go to this site.....click on the links.........obtain the information that is factual for you to make an educated decision to help save our land rights. If we all come together, we can stop many of the actions being brought forth to us. Please help.......Please save our recreation that our families and friends enjoy so much. Our club accepts donations to help preserve our recreation, maintain the web site, advocating, and working on the trails to clean them up and repair them also. Sure you can make comments here about this, about what you feel about this, even if you don't agree.....leave a comment here then. This is open for all to see and become aware of this problem. No matter where you recreate, some government department will have some type of involvement in it - some how - some way.

Topic by spa31rky 8 years ago


View All Steps

Hello Some of us like to view all the steps on 1 page. It would be very convenient if this was the default option to view all instuctables instead of having to click on the button for each one. Thanks

Topic by ak08820 3 years ago  |  last reply 3 years ago


What To Do? Answered

I received an email from Instructables (on 12/1) that I had a 'Best Answer'. It isn't showing on the topic concerned, or showing in my BA list: https://www.instructables.com/answers/My-brother-brakes-alot-of-things-when-he-is-mad-co/ (I did it!!! I put a link up!!).   Who do I contact?-is it the robot thingy? ('He' has also added one year to my age - this is a criminal offence. Who do I beat to a pulp?).

Question by Z.. 9 years ago  |  last reply 9 years ago