Search for easy in Topics

Hey people, me and my friends are going to make a video and i was just wondering if you had any ideas i could easily do to put into it. eg. explosions (controlled of course in a safe manner) and anything that will impress Cheers

Anybody know some quick easy toys to make? Simple, with fairly cheap materials?

Where is some easy knex guns with mags and true trigger

Make a quick and easy top with a CD (remember those?) and some lamp parts. You can make the design a little nicer by putting a new pattern on top or just see what the CD art is like when it's all a blur. CD top via Make blog

One year of heavy rainfall followed by one year of drought adds up to a recipe for disaster.  Its time to do something about your cheet grass.

I'm thinkin of puttin together one o these. Think I'll go with counterweight instead of spring. Even the counterweight will act toward more momentum, assuming the fulcrum is sufficiently anchored.   Post by Samanyoluhaber.com.

I have seen beginner electronics projects but most of the things that they make arent really functional theyre just kinda display things like led throwers or custom made circuit board. I want to learn electronics but not by reading a guide but by doing the diy projects that create electronics items that are functional....does anyone know of any?

Hey everyone! i need some help... i have to do a project for my physics class. it should be a game or toy that has light, sound and action. i tried looking at most of the instructables under tech but they are a little advanced for me (but look like really cool projects). i want something that doesn't involve programming or kits. have any ideas?

Okay I had an idea to make an interactive mirror with some mirror grade acrylic and an old android phone. Simple enough I could just mount the phone behind the mirror to display the weather for ex. But wouldn't it be cooler to be able to use the capasative screen? So that is my question, how can i have the android phone recognize my touch? Maybe use a different material besides acrylic? Any suggestions? Thanks.

What I make is super easy and simple and no baking required.Ingredients: 1 graham cracker pie crust (You should see it in the bake isle* 2 Boxes of the Philadelphia cream cheese (8oz a box) 1 box of cool whip 1 box of Jello (This goes into the mixture with the cream cheese ; Flavor would be whichever you like, I use the lime.) 1 box of Jello (This goes on top after it settles for a couple hours) 1/4 cup of sugar (Depends on how sweet you want it.) -- Mix the two cream cheese together until it gets creamy. -- When it is soft and creamy add the sugar and mix well. -- Open the box the cool whip, pour the whole thing into the cream cheese mix -- Mix well and everything is incorporated. -- Open which ever jello you want into the cream cheese. (I use a Lemon one and I buy the big packs cause its always on sale. Use half of that Jello mix with a cup or hot water. Let the jello cool before pouring it into the cream cheese I usually let it sit over night in the fridge and in the morning, I would mix my lime jello to pour on top.Pour it in and let it sit for about 3 or 4 hours and TADAADADA, Cheesecake is made! I hope this helps, its a family recipe and I hope I explained it clearly, new to this reddit thing and if you have an question, feel free to ask! Enjoy and have a wonderful party and best of luck to ya in the kitchen! :]

Ever wanted to share your instructable with someone offline? Its hard to remember those random ID's at the end of the URL, isn't it?HAVE NO FEAR, I AM HERE!(Note, you can be afraid of me, if you'd like)Anyway, on to the point.Biobattery!Look at the URL! Its all nice-looking! And what do you know, I added the Allsteps link in for you!You probably want this for yourself, dontcha? Don't worry! Just type this in the URL of your favorite browser!http://instructables.thruhere.net/id/add/name/YOUR_DESIRED_SLUG/id/INSTRUCTABLE_IDThe "slug" is the thing that goes on the end of the URL, in the above case, it was "biobattery". It can be numbers or letters, but it is case-sensitive!The instructable ID should be JUST that random string. No slashes, no ?ALLSTEPS, just the random letters/numbers.Please, please don't abuse this, please. If I find that someones been taking up multiple slugs for an instructable, or not linking to an instructable, you're going to be sorry ;-)All of you who say I should being doing something else, this was done in less than fifteen lines of python! Thats why theres no nice page to create those links, because I'd have to spend 10 minutes making it. I actually spent more time on this post than getting it to work!And if anyone wants to donate a nicer domain, just ping the above domain to get my IP, and let us know ;-)PS: If you hate "instructables.thruhere.net", you can use "ytm.ath.cx", if you can remember it! Its pointed at the same server.

I have a 12dc sever fan installed into and old fridge to be made into a jerky dehydrator. what i need is a simple TWO POWER WIRE IN and TWO FAN WIRES OUT speed controller as the fan empty's the air from the fridge in 2 seconds flat. what i need is a controller with three speeds and an OFF. i can make one very easily from a detailed schematic but please keep it simple

Hey! :) I'm new here, I love Electronic things and I would Like to make DIY Project, I bought some stuff on ebay as In my city there is no normal electronic store, I got some led transistors and resistors.. I Tried to make the flashing leds by sounds it seem to work for the first 5 min and then it burned out... I want to make an easy cool impressive DIY Project, My actually first project that will work. I would love your help guys, Thanks!

When you hover over the PDF icon a bubble says "Download as PDF for easy printing and offline viewing".  I suggest you skip the "for easy printing" -- it suggests the reader waste paper for something that can easily be viewed online.

Becouse i need to use up my knex and i want a challenge.

What is the easyest way to program PIC chips? i have a ghetto programmer around for attiny's, and wondered if there was anything similar to that...

I was wondering if anyone knows how to make a giant spider without all the complicated wire mesh and all the paper mache?????

Ok, I can't think of the name of these, they are like a rope but it is clear and it has LED lights in it...AND How much would PlexiGlass cost for a table that is 20x10x20 and a drawer that is 16x20x7

Sustainable living is easy and cost-free if we can only open our eyes and look around us. They are many things which we can make use of and make them into beautiful items. It would be ace with these items are useful too. Please support this cause by frequenting our site and even donating. www.projectfidgetyfingers.blogspot.com

I think that this site should have a lot more cheap and easy DIY projects...While i think all the projects are great, like the CNC machines and advanced electronics, i really think that we need to have a lot more simplified and easier instructables that are featured that people don't have to go out and buy a 100$ CNC machine for.  I'm not saying that the site doesn't have easy ones, just less of them are featured than harder more complex ones.  Just my two cents, please don't hate.

I am really interested in electronic stuff, and all I really have been doing since I got my instructables account is commenting and answering. Any ideas?

Growing up our neighbors used 1/4 tsp of Clorox to 10 gal. of water. Who needed flashlights when your teeth are super bleached.?

There are plenty of ways from breaking it down and persevering, to inventing a really useful tool. What is the fastest and easiest way to make a substantial amount of money? What has worked in the past, and what continues to work?

Hi all, This is an easy question about resistors, its been years since I use any. So, I have a replay which is rate 12v DC and 2amp. The power supply is 12v DC and 6 amp. V = I X R R =  V / I so R = 12 / 2 = 6ohm So I need a 6ohm resistor? Is that correct? I can't believe I have forgotten this! thanks Gary

At the moment all the times on the site are in US times. As a bonus feature for pros it would be REALLY useful if we could set our timezone in our profile settings so that all the comments in the forums, on ibles and in answers were changed to our timezone. Please please please please?

Hi all! I have been scouring the web for easy, simple futon frame building instructions and plans and I have not come up with anything!  If any of you would feel so inclined to try something simple that's made out of  say plywood, not slats and can be made by an amatuer woodcraftsmen, PLEASE SHARE YOUR KNOWLEDGE:)  I'm up for anything, it doesn't have to look traditional or anything, just as long as it can fold into a bed.  We need to build it for our boys to sleep on, but be able to put it up during the day. Thanks in advance!

Hey all, below is schematic for a really simple water level sensor. I want to hook this up to my Arduino so that Arduino will know when each LED is ether HIGH or LOW. My question is where at what point in the schematic do I hook up the digital read pins?   

Get some silicon diodes 3 for a 1.99 at radio shack or cheaper online tape one to a match and ad 6 to 12 volts to it and after a few seconds it will overload and get real hot! then it with ignite the match which will then ignite the visco fuse. original idea from jolly roger creator of anarchist's cookbook

I am looking for the best way to implement a battery supply for my project. It needs to be able to fit in an enclosure measuring 5 x 2.5 x 2 inches. It needs to have a voltage in the range of 7 to 12 volts and have a fair amount of capacity. (maybe around 1500 - 5000 mAh?) The battery(s) also should be easy to charge, such as through a regulated voltage supply, with no complex control circuitry. It can be multiple batteries. I am mainly looking for the best type of battery here. (NiMH, SLA, Lithium, etc.) Any suggestions?

Is there any way I could make a DIY heating element? Or, if not, is there anywhere I get get one on the cheap?

Meh, I was on a building spree and kept morphing a gun until I eventually came to this. After I was all done, I finally realized that I pretty much wasted my time because I accomplished nothing. Meh, it's a cool and different gun nonetheless, but it's nothing to get hyped over either. I was bored so I made a video for it anyways seeing how I haven't done that in a while. Enjoy. <br>

I convert engines from weedeaters, leaf blowers, etc. for use on large model airplanes.  I use an aftermarket electronic ignition on the engines.  The ignition uses a Hall effect sensor and a magnet to trigger the CDI ignition.  I would like to build a digital tachometer that would use that same trigger.  They sell them for $25.00, but I thought it would be fun, and cheaper, to make one (or several) myself. Can anyone help with a circuit and parts list? Thanks!! vettebob

I get so much mail everyday and my mother-in-law just tosses in a pile at my spot at the table. I'm usually so tired after work and other things take priority. In the end I have a huge mess and have no space to do anything. I picked up a cheap 3 slot mail sorter but it filled up too quickly and didn't have enough slots to separate my mail effectively, and the cat kept knocking it off the table. I'm looking for an organizer to hang on the wall that has about 10 slots or more and a place for stationary, pens, paper clips, post-its, etc... All the ones I have found online are way too expensive.

First of all - congratulations to all the finalists! Our Halloween Easy Costumes finalists shared some absolutely fantastic costumes! Here at Instructables we are always impressed with how the simplest of materials can be turned into the most amazing Halloween costumes. Not only were our finalists super creative and resourceful, their costumes were well documents and could easily be recreated on a small budget and with very little time. We loved reading all the tips and tricks for getting a costume just right, substituting materials and customization. Picking winners was challenging, but we know you'll be just as impressed as we are with them! And so, without further ado... FIRST PRIZE Composer Busts by davidandora. This costume is not only incredibly easy to do, but it's an original concept and looks fantastic. Another fun attribute is that it looks even better when grouped together, so this costume is perfect for you and your friends! SECOND PRIZE (alphabetical order) HAWKEYE. by Mr.Sanchez How to make a Thor Costume by The Rambler Minecraft Steve Costume by pjkumpon pjkumpon's Minecraft Steve Costume was one of the best we've got on Instructables - looks amazing and the finishing touches like adding velcro to keep the head on straight or adding foam for comfort truly made it a top notch costume! Hawkeye and Thor used hot glue and craft foam in fabulous and inventive ways - both costumes are definite proof that those two materials can make great costume armor. THIRD PRIZE (alphabetical order) Duct Tape TMNT Shredder Costume for $8.11 by imamathguy Luke Skywalker and Darth Vader (Kid-friendly) by eric3dee Make an award-winning costume in one night with packing tape and newspaper by morganlemae Mr. Fredrickson from UP - Halloween costume, 8mo+ by T_Albrecht YOSHI HOODIE by jtrask1 Our third prize winners really shined when it came to using household and ready made materials! Mr. Fredickson's PVC pipe walker was perfect - and we loved the idea of adding extra weight to it to help with stability. And the sweater vest and bow tie were too cute! Shredder's cardboard and duct tape armor came together quick and was ingenious - the duct tape is a great substitute for metal. The Yoshi Hoodies were a great project - we loved how the author took a simple piece of clothing and was able to make a cute costume that looked great and was easy to wear out trick or treating! morganlemae's tree costume shows the potential of packing tape in costume making - I can't wait to see if it spawns more packing tape costumes. And last but not least, the creative use of materials like ace bandages and a milk jug for the Luke Skywalker and Vader costume was really impressive - not to mention the absolutely adorable photos! Congratulations to all that entered! It was so much fun reviewing all the entries. Our Halloween contests make us realize we truly have the most creative and expressive community on the internet. You are all amazing - thank you for sharing with us. :D

Would anybody be interested in creating a new laser cutter instructable. I saw this one: https://www.instructables.com/id/Laser-cutter-start-slicing-stuff-for-under-50-dol/?ALLSTEPS , But it seemed WAYY to difficult, to difficult to get the parts, and not super high quality. If anybody could do an instructable for this, (possibly with a RAS PI, it would be much appreciated. We want a cheap Laser CUTTER!!!!

Does anybody know of an cheap simple circuit, using only a few components, to convert dc into ac or pulsed dc? I'm going to be using a super capacitor that's rated for 2.5 volts and I want more out of it, so the output is going to be put through a voltage multiplier circuit.

That is the question. It will look something like the one pictured, and will be a combination of this, this, this, this, and many months of research. It will be cheap, under $300 easily. I want to know if I should do an 'Ible before I make it so I can take pictures. What do you think?

Hi :) Next year, I'm planning on starting a Mechanical Engineering degree. I want to get some hands on experience with making stuff just as preparation, but I've never done anything like this. What's a good place to start? And something that won't cost a lot as I don't have much money? Any help is appreciated :D thanks

Whitch ball machine is easy to build?

Some ideas anyone

When I am putting my photo's into the easy share picture frame, the writing down on that bottom of each picture is showing. Can I erase them?

Https://www.instructables.com/id/How-to-Make-Prime-Rib./

On a scale of one to ten (one being a 2 second fix, ten being i should not attempt at all), how easy is it for me fix this ipod, the screen appears fine. Also, how would i go about fixing it?

This is a new feather in my recycling cap.  Is there a way to break these down. I'd like to get a better price than "electric motor weight". Thanks

Hello! Im working on a Staples Button Hack! but..... Problem that I have is that I feel like it is a Waste to scrap the original "that was easy" message. And the problem that comes along with this would be that I have to use a 9v battery to power the new circuit and the original button circuit uses a 3v battery. I'm not great with Ohms law but I do relize that I need a resistor but... i do not know if that will put in too much current into the original circuit?Would anyone know how I can calculate this? And does the amount of current even matter? -Thanks! Noobiefied

My youtube channel will help you make handmade products, DIY crafts such as crepe paper flowers, Quiet book, valentine card/gift, birthday card/gift, christmas card/gift, christmas card/gift,...  It is quite easy . There are a lot of kinds for you to make Flowers: peony, carnation, orchids,.... If you are interested in it please follow/like/comment my channel https://www.youtube.com/channel/UCnvoThr2-6rfWITzEUQWTJg 1 how to make crepe paper flower - Sunflower   Easy and beautiful Paper Flowers - Gerbera paper tulip flowers to be continued...

I would like to start cooking healthy foods for my family but I don't have a lot of time to spend in the kitchen. If you have any suggestions I would love to hear them.

 If I wanted to upgrade my motherboard but not any of the other components, could I do it without having to re-install windows and do loads of messing about software wise?

Anyone who can answer my simple question correctly(you do have to work for it some) can get the Best Answer! The profile picture I use, the picture below, has an important historical meaning. What person/group used this flag?