explosives

What type of explosives do u wanna see next?

Topic by DO_NOT_TRY   |  last reply


Explosives

I am going to be filming an action film soon and I need to some explosives to use in some shots. Anybody know how to make some? I can get pottasum and all that stuff I just don't know how to make it. I also need an electric fuse so it can be set off manually not by having to wait. So if any one knows how to make that too.  I was going to use black powder but wondered if there is a better way. It will be covered with dirt to make a dirt explosion not all fiery. 

Topic by Mr-Napkin   |  last reply


Explosives

I'm looking to make explosives for some homemade fireworks. I want something to put in what I already have to give it a nice loud bang. I don't have a clue where to buy stuff like potassium or salt peter and all that good stuff. But if you could give me a few suggestions, that would be appreiciated.

Topic by Mr.Devious   |  last reply


Explosions!

I am looking for ideas for an explosion for water bottles or soda bottles.I am not looking for: coke and mentoes sugarcubes and vault vinegar and baking soda My version of an exploding bottle is chucking one up in the air an watching it blow up when it hits the ground. Please post some Ideas!(or if you happen to come across a way to invent a watter bottle cannon, that shoots full water bottles...POST IT!!!!) i can also give you help on all of your explosion needs. or you can email me at sockerpro@gmail.com

Topic by awsome   |  last reply


Measuring an explosion

While this may not be the best instructable I believe it would be helpful for many people doing science fairs (ie: ME). So here is the question said instructable would answer: How do you measure the force of an explosion, specifically of gases or liquids used in fuels? I have been racking my brain on this but everything i have come up with seems like it would be inaccurate. Thanks for any help

Topic by durp123   |  last reply


cold explosions

I know that by adding ammonium nitrate and water the compound gets cold. so my question is by using ammonium nitrate and other then water can I use to make extream pressure build up in a short time while still being cold. this question is not for any explosive device to cause harm to anyone or thing. just wondering if a cold explosive could be possiable. thank you

Topic by pokiesmokie   |  last reply


Ammonpulver (explosive)

Hey, i was wondering if anyone has any experience with it. it is ammonium nitrate and charcoal. i hear it is hard to ignite? does anyone know the ratio?

Topic by DELETED_DELETED_kruser495 


Underwater Explosions

Let me start this question/thread by saying I live in the middle of the boondocks and have no worries of any legal repercussions for my actions. Regardless, I am lazy, and am looking for an easy way to make an underwater explosive for fishing purposes. If anyone could tell me how, it would be well appreciated. I just want to blow the fish out the water, then row around in my boat, and pick them up.

Topic by Incineration_Prophecy   |  last reply


USA explosive laws

I suggest an 'ible about USA laws and case law regarding the production and use of explosives. there are always comments about this in the explosive 'ible 's and it would be great to clear some of it up.

Topic by smithy813   |  last reply


Explosive tip arrows?

I have been looking for a way to make archery more intresting so i came up with the idea of explosive tip arrows but i got afew qustions. 1st of all i know this is not really safe but i can insure all of the instructables community i will use them responably. What would be the best type of explosive to use?? would it be better to use an explosive that will explode with the inpact or rig a primer in there somewhere. My next qustion is what do you guys think will be the best idea to house the explosives in?? should i make a tip to put it in?? If so what would be a good design?? or should i rig the explosives inside the arrow?? Thanks for everyones input.

Question by Don,t try this at home   |  last reply


Explosive tip arrows?

I have been looking for a way to make archery more intresting so i came up with the idea of explosive tip arrows but i got afew qustions. 1st of all i know this is not really safe but i can insure all of the instructables community i will use them responably. What would be the best type of explosive to use?? would it be better to use an explosive that will explode with the inpact or rig a primer in there somewhere. My next qustion is what do you guys think will be the best idea to house the explosives in?? should i make a tip to put it in?? If so what would be a good design?? or should i rig the explosives inside the arrow?? Thanks for everyones input.

Question by Don,t try this at home   |  last reply


DIY Minor Explosive

Does anyone know of any under the sink materials to make small explosives out of. I have looked on the internet and found kn03 and all that stuff and stump remover and stuff but I can't get that now. I am looking for an answer like, Mix some alcohol with bleach, put it on a towel to dry. Then mix it with (fill in blank) and let it dry again. The cut the towel and it is explosive powder.  I know that recipe is fake but that is the kind of thing I am looking for. I am not going to hurt somebody. I am just interested in pyro stuff and have been trying a few things but it is kind of hard to do it right. Please help! 

Question by waterrocketexpert   |  last reply


Explosions for football game

I am a chemistry teacher and I need to make a set of explosions for the football team to run through. The run on the field and the explosions go off on each side of them Any ideas. I may fill a dozen metal coated baloons with hydrogen and, and ignite them with some sort of electric spark strong enough to pepetrate the baloon. I'll put six of them on each side of the path that the team runs out through under the goal post. And how will I make the system to spark them off (electric plug in?)(capacitors, tesla coils, etc.?) thanks

Topic by ChemNut   |  last reply


Explosive music player

There was much fear and freak out [when the box was opened]. But cooler heads prevailed and a phone call was made. “Hey Matt, did you order metal objects of a dubious nature?” Find out what they did, and how, here. (And what music would you store on it?  My first thoughts were Mr Kiss Kiss Bang Bang or Twisted Firestarter...)

Topic by Kiteman   |  last reply


How to do a hollywood style explosion

Hey, dose anyone know how to do a Hollywood style explosion. Sort of like the ones in Monty Python and the Holy Grail where there is a large fireball. I have heard of taking a plastic soda bottles and filling them with gas, but I was not very fond of this idea.

Topic by Sedgewick17   |  last reply


Container explodes after being shot with rifle? What mixture?

I saw this on tv. The guy was putting a mixture in a variety of objects, then backing away up to what a ppeared to be a hundred yards and shooting the container with a high velocity rifle. The explosion was large depending on how much was used. What was the mixture?

Question by    |  last reply


Music Video Help?

Me and my friends are making a music video for a class we chose the song "A Dirge For The Underground" by Attica! Attica! We have most of it  done, but we are having problems with the last shot, we are doing of an explosion (not with actual bombs, just implying there are bombs). We don't mean like Die Hard, Action Movie, Jump to the Ground at the last second explosion, but the explosions you traditionally see when a building explodes, lot of smoke and debris as opposed to fire and a slightly sooty hero/heroine. It's just going to be blowing a lot of immediate debris and smoke blowing outward and then smoke drifting up. Best idea we've had so far is rent a big ass fan and set up a temporary business of cleaning out fires lol. We unfortunately do not have access to the media lab so digital effects are unfortunately not an option. Any better ideas (that don't damage the location, the owner would be pisssssssssssssed)?

Question by SuperCoPilot   |  last reply


Explosive Fun with a Capacitor Bank

Watch a 24kj capacitor bank as it discharges through various objects. Maniacal laughter follows each one and a slo-mo montage finishes it all up. via Make blog

Topic by fungus amungus   |  last reply


igniters and detonators

Here all the igniters and detonators

Topic by larsjet   |  last reply



what's the dark grey powder in a firecracker? Answered

I've been taking apart firecrackers, and I've found out that the light grey stuff is the flash powder. so what's that dark grey stuff under it? is it just filler? what's it's purpose?

Question by codongolev   |  last reply


Home-made Flash Bangs

Hey everybody, i'm looking to find out how to make the most efficent, cost effect and relatively DIY flash bangs for your day-to-day blinding needs. i know there are some fairly routine methods follow out there, but i am hoping that if enough of us instructabilians share our knowledge and experiences it will be possible to create a dam good design. thanks for your help

Topic by Klive   |  last reply


KNEX GRENADES!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

ANY COOL KNEX GRENADES

Topic by KnEx_MaStEr   |  last reply


Exploding color pigments - need ideas to make

Hello everyone, I am working on a film project and I need to make small explosions of colored pigments and/or powder. Below is a link to a few sample photos of the affect that I am trying to achieve. http://photogrvphy.com/pedro-aguilar-bang/ I have tried many different techniques from impact to compressed air. But I am not getting the shapes that I am looking for. I am thinking  that the best technique might be some sort of controlled explosion. This could be something detonated within a pile of the powder or potentially (and more complicated) and fully concealed shell that includes the powder. I will primarily be shooting straight down above the powder so it really only needs to explode up and out. And again, these are relatively small blasts. I would estimate the powder blasts in the images from the link are only approximately 2' in width at the most. And help would be greatly appreciated!

Topic by jedikremer   |  last reply


Sparklers and the meaning of life

I have been playing with sparklers for ages now the latest experiment was to do several layers of aluminum foil and duct tape around two packets of sparklers and putting some arrow fletchs on them... the last one we tried went across three paddocks and nearly took out a shetland pony :-( we measured it the next day and it came up to 150 metres. However i have allways been looking for explosions... sidetracking slightly here but i actually got an explosion my bro welded up a pyramid the size of a soccer ball i filled it with sparkler dust dad wasnt very happy about the huge hole it left in our roof when it exploded and sent 6ml plate in the air for over 10 seconds that was the dummest thing ive done so im looking to down scale slightly with less shrapnel. So in conclusion Im after a recipe using roughly $30 worth of sparklers to explode keeping in mind that i live in Aus so some matierals are harder to come by. thanks everybody any feedback is supported so keep the comments flowing :-)

Topic by cor0018   |  last reply


I am in need of a compound that i can use in a flash pot that will burn cold, so that it can be used in doors.?

I am in need of a compound that i can use in a flash pot that will burn cold, so that it can be used in doors.?

Question by bondo86   |  last reply


flame igniter

Joho! i am making something similar to the "fireslinger" made by tetranite. The big difference is that mine w ill use short jolts of gasoline, that come from a perfume tester, so there will be short big flames, but i need something to ignite the small cloud of gasoline. the problem is, that it cant be a flame, or a torch, because it will be mounted on the wrist. so i will need a reliable ignition source, like a electric shock, the only problem with electricity i use, is that the sparks are too small to ignite everything, so i need bigger sparks, made by anything that will easily spark!

Topic by pluish   |  last reply


I need help explaining the shape of this nebula Answered

Http://www.esa.int/spaceinimages/Images/2014/10/Butterfly_death_throes This image is the "Butterfly Nebula". I'm having trouble understanding it's shape. According to the accompanying blurb, the shape indicates a "bipolar nebular, where fast-moving gas can escape more easily from the poles of the dying star than around its equator. This creates a lobed structure reminiscent of an hourglass, or, as in this case, a giant butterfly." But... why? Why can the gases escape more easily from the poles?  Why is it harder to escape at the equator? Surely, if it was blasting from the poles, we would see a more linear shape, long "beams" of material shooting out of each end?  This image looks to me as if material blasted away from the equator, but parallel to the poles, almost as if the two halves of the star's surface were peeled apart, like turning half an orange skin inside out. Anybody got a borderline high-school/university level explanation for the shape?

Question by Kiteman   |  last reply


Explosions - How We Shook The World.

  Anyone watching 'Explosions - How We Shook The World' on BBC4 (UK)? Jem Stansfield making various explosives and a very effective cannon! This is the kind of science program we want !!! - Memories of my younger days #;¬)

Topic by AndyGadget 


What will happen if i use a capacitor that has a farad measurement that is less than what is required ?

The voltage limit is properly matched, only the farad measurement is not the same. IMPORTANT WILL THE CAPACITOR EXPLODE?

Question by La Tour Rouge   |  last reply


On july 4th. America will blow up the moon...

Well Im kidding about the date, but they really are (if its already posted sorry but i couldnt see it in 5 pages) anyone else worried?http://www.siliconvalley.com/ci_12590357?IADID

Topic by okoshima   |  last reply


What is the white powder in firecrackers?

I took apart some basic firecrackers, they have a green fuse, waterproof, etc. So inside, I found some grey-ish powder (suspect it is Gunpowder) and a lot more white powder. The Firecrackers do not give of a huge flash, so I am asking. What is the white powder, what does it do, and should I keep it? (Please no answers like "You shouldn't play around with that" and other negative responses. I am looking from a makers point of view.)

Question by Colonel88   |  last reply


Worst prank EVER

So I broke a wheel off my lawnmower, no big deal, just weld it back on. How was I supposed to know that a wooden stump would break it? Anyways, since i have a shitty flux core mig welder from Harbor Freight, I decided I'd ask a friend to use their gas mig to fix it. I bring the lawn mower over, bring the welder outside, clamp the wheel bracket back on, and start the weld. All of a sudden, there's a huge ball of fire all over my mask. I immediately stop welding, and jump backwards.. yelling out, while he sits there on the ground laughing. He switched the argon with acetylene, at 10psi. Not cool. It was hilarious, but not cool.

Topic by cvxdes   |  last reply


Is it safe to make your own mortar tube? Answered

A friend and I are putting on a (legal) fireworks show tonight with commercial fireworks. I haven't finished my fireworks ignitor yet, so we're going to be lighting the fireworks with punks and running away. We're going to set up two "stations", one for each of us so one person can set something up while another sets something off. The problem is, the mortar set we bought only comes with one tube. I'm considering making another one out of PVC of the same size as the cardboard mortar tube, but this concern my friend. Is this unsafe, even if I stabilize the PVC and if it's the same size as the original tube? 7/6/10 UPDATE: I know it's past the fourth, but I'm still interested in kowing the answer. Thanks, Noahh

Question by noahh   |  last reply


Doorbell - press button and make an explosion sound

I'm thinking of making a prank doorbell where you press the button and an explosion sound goes off. I seem to be a little stuck on choosing a simple audio input that I can put an explosion sound on. Any suggestions? thanks!

Topic by abugslife99   |  last reply


Where can i find fuse? Answered

I live in Johannesburg, and I don't want to buy any fuse online.  Is there anywhere where I can buy fuse here?  I live in Houghton.

Question by BOOM5601   |  last reply


BOOM!!

I made this just yesterday because I could not find any tuorial that tells you how to make a decent explosion. So after a little experimenting, I got this. Would anyone like to see an instructable for this in GIMP and Photoshop? I updated the picture from one that did not have a backround to this

Topic by Ausm   |  last reply


hydrogen peroxide plus aluminium equals ... what? Answered

I know that hydrogen peroxide and alcohol equals well"whoomph", but what happens if I mix hydrogen peroxide and aluminium?

Question by flamesami   |  last reply


Mythbusters - How to pancake a car Video

A great video of the mythbusters team firing a two-stage rocket sledge into a car in an attempt to pancake it :PAt the point of impact the sledge was traveling at 650mph !!The car doesn't really get pancaked, it just kinda... disintegrates, which is completely awesome.

Topic by =SMART=   |  last reply


nitroglycerin blasting cap ?

I was wondering if there i such a thing as a nitroglycerin based blasting cap with no other HE (high explosives ) or primary explosives. products of nitroglycerin would be acceptable but as far as i know it only form more HE's so if this is possible please let me know

Question by subtotalkiller   |  last reply


What is the optimum amount of rubbing alcohol for explosions?

I am working on a mini-cannon based project. The cannon has a chamber with interior volume of 15.2 cubic inches. For propellant I am using rubbing alcohol (isopropyl alcohol) that is electronically ignited. The barrel on this gun is about 2 feet of 6mm tubing, designed to shoot Airsoft BBs. I was wondering if anyone knows what the ideal amount of rubbing alcohol to use was (I am using 70% alcohol now, but i can get at least 90% at the store). I could also possibly use butane or propane, if that is better. I went on the internet and looked up the stoichiometric ratio for isopropyl alcohol, but that just told me "1mol fuel to 4.5 mol oxygen at 100 percent concentration." I am not mathematically or scientifically capable of turning that bit of info into a usable amount. 

Question by ilpug   |  last reply


Free Hardwood, Dragon Eggs, Green Explosions...

Sign-up for our newsletter here. Jan. 24, 2008 Welcome back! This week we announced the Get the LED Out! Speed Challenge. Make an awesome Instructable featuring LEDs and win a TV-B-Gone kit! The Homemade Holidays winners have been announced. See who won here! Which of our 14 great finalists should win the $15K VersaLaser? Help decide! Check out these cool instructables! Make a gorgeous Dragon's Egg Turn a regular egg into a fantastic looking dragon's egg in a few minutes with a bit of hot melt glue gun glue and some paint. posted by KaptinScarlet on Jan 23, 2008 Encode data in 2D on your T-shirts, business cards and stickers ! Use QR code, a 2D bar code, to encode fair amount of data that can be read with cell phones! posted by 5Volt on Jan 17, 2007 How to Start Fire with Water! Start a very cool green combustion with just a few drops of water!posted by pudi.dk on Jan 17, 2008 Carrot Caviar Jump on board the Molecular Gastronomy train by making up some carrot caviar in your own kitchen. posted by mzed on Jan 18, 2008 Awesome led cube You never know when you might need a glowing cube to convince people you are from the future. posted by AlexTheGreat on Jan 23, 2008 Speed Challenge! Vote on the finalist pages! Book shelf? ...what book shelf? Here is a method of displaying the artistic covers of a book when space on a table or shelf is not available for displaying it. posted by watermelon on Jan 20, 2008 Make your own Roll-Up Keyboard Have you ever wanted one of those pricey roll up keyboard but didn't want to spend the money? Here is a quick and dirty way to make your own. posted by Auger+Duval on Jan 22, 2008 How to Remove A Fishing Hook Using Fishing line If you get a fishing hook stuck in your finger, salvation is a quick tug of fishing line away from you. posted by back-cast on Jan 23, 2008 Build your own computer Why buy a computer from a manufacturer like Dell or Gateway, when you could build a more powerful computer for less money? posted by bmlbytes on Jan 19, 2008 How to Get Cheap or Free Hardwood Lumber Here's how to buy new lumber in bundles for less than firewood. This seems to work best for hardwoods, cabinetmaker type stuff. posted by TimAnderson on Jan 21, 2008 Show us your yarn! There's still time to enter pictures of your yarn projects in the Lion Brand Yarn Challenge!! Here are some of the 222 projects already entered- check them out, talk to the crafters, and get inspired! Hats Afghan Shawl Ornaments Goldfish   Now go make something awesome, and I'll see you next week! - Eric

Topic by fungus amungus 


ammonium nitrate and water get cold. how can i make a cold explosion

I need a chemical compound that makes extream presure in a millasectond, like an explosion but must remain cold. I know that by adding ammonium nitrate and water the compound gets cold. so my question is by using ammonium nitrate and other then water can I use to make extream pressure build up in a short time while still being cold. this question is not for any explosive device to cause harm to anyone or thing. just wondering if a cold explosive could be possiable. 

Question by pokiesmokie   |  last reply


How to get Potassium Nitrate (Saltpeter)?

Question by    |  last reply



Equivalent of fire wire. Anybody know of any other easy fireworks (like as easy as firewire to make)?

Just wondering if anybody knows of anything as fun and easy to make. (as easy as the steel wool and wire fire wire thing.)

Question by The Red Button   |  last reply


Is it dangerous to use a higher-amperage laptop AC adapter? Answered

I have two laptop AC adapters rated for 19V. One supplies 1.6A and the other 4A. Would I damage my laptop/battery if I use the larger adapter in a laptop designed for the smaller one?

Question by thoraxe   |  last reply


I'm making an air cannon and I'm trying to make it automatic. How do I make the timing circuit?

I don't have all the details worked out but it should look like: http://i123.photobucket.com/albums/o290/Strid3r34/EggCannon.pngI just need to know how to make a timing circuit so that the bolt reloads (the servo should retract then detract), and then the solenoid valve is switched on for a split second (so as not to waste the air) and then reloaded again. I need it do this as long as the trigger is held down. I have no idea how to make this circuit, and I'm totally new to this so please explain in detail. pictures would help a lot.?

Question by strid3r   |  last reply


Welcome to Weapons, Guns, and Explosvies

Welcome to Weapons, Guns, and Explosives (WGE) I'm pretty lianian on what goes on here I don't really care as long as its about guns, explosives, or any kind of weapon. I hope you enjoy your stay at WGE and thank you for joining.

Topic by 6Rea6per6   |  last reply


Making thermite. How do i open etch a sketch. Answered

I am trying to open my etch a sketch so i have aluminum powder for thermite. How do i get the sketch open???it has no screws whatsoever and i cant seem to pry it open with screw driver.

Question by The Red Button   |  last reply