FAQ

I figured we could start a post for the website FAQ atleast untell they make there own i'll start with one (please add as you see fit) Q)is there a way i can edit my responces to an instructable? A)Not really but you can delete a post a short time after it's posted. So just copy your text delet the post as repost it with the edits

Topic by Jack Daniels   |  last reply


Searchable FAQs?

Is there a way to search the instructable FAQ's?  trying to find out why my return key is not giving me a new line when editing instructable instructions.  thanks

Topic by dome_head   |  last reply


My FAQ is done!

My FAQ is done. Please take a quick look and tell me if its good, if its bad, what is correct, what should be changed...etc... If anyone has a question that should be added, please tell me!If its good enough, would anyone mind adding it to their greetings? (Hello and welcome to ibles, I realized you didn't receive....blahblah....) You would just have to add: also, check out Keith-Kid's FAQ to answer any other questions you might have.....I'm hoping that if its good enough, it can be made in to a sticky in the FAQ section.I'd like to thank Nachomahma, Kiteman, and Brenn10 for helping me get answers

Topic by Keith-Kid   |  last reply


Build Night FAQ

General Resources What is the Build Night program? Instructables sponsors monthly build nights at makerspaces and hackerspaces around the world. Each month we partner with a different company to send you materials and/or tools to run a workshop at your space. In return your space posts Instructables from your build night. How can my makerspace get a group on Instructables? Check out this forum post that list the guidelines for getting a group on Instructables. Build Night Guidelines + Best Practices What are the requirements for signing up? Your makerspace must post at least 1 Instructable to sign up for a build night. We look at project quality when deciding on what spaces to accept. I suggest writing a feature worthy project. Check out the feature guidelines. What does the process look like for signing up for an event? Signing up is a 2-step process. You must complete both to fully sign up. Fill out the google form at the bottom of the event announcement. You will then receive a private message in your Instructables inbox by a specified date asking for your shipping information. You cannot receive the materials without completing this step. What is the selection process for picking makerspaces to participate in each build night? It is not first come first serve. We look at past build night participation, past project quality, and project proposals for the current build night. If you haven't participated in a build night OR haven't submitted Instructables for build night program we suggest your space create Instructables over the next few months and submit them on future applications. Do build nights have to happen at night? No! The only requirement is that you host 1 event with the materials provided during the month of the build night. This can be on a weekend, at night, during the day….literally anytime! You can also host multiple build nights during the month. What happens if you don’t submit Instructables by the given date? Not posting Instructables by the deadline will affect your chances of participating in future build nights. We keep very thorough records of who does and does not submit. It is VERY important to let me know if you are not able to submit a project by the deadline. I am much more understanding and willing to waive a missed deadline if I am given a reason. What are the best practices for writing high-quality Instructables? We want to see feature worthy projects! Check out this forum post with tips on how to create great tutorials. As the event organizer the responsibility falls on me to post all Instructables. How do I motivate my community to help? Check out this forum post with tips on how to motivate members of your community to get more involved. How can we get more visibility for our build night event? Use social media! Tweet at us. Mention us on Facebook. Share pictures of events on Instagram. Sponsors love it and will be excited to share your posts! So be sure to use #buildnight. How can we hear about upcoming build night events? If you are interested in being directly notified about future build nights fill out this form to join our mailing list. You will receive an e-mail when new events are announced. Please only sign up if you are not already on the mailing list. Other Build Night Details How many makerspaces participate in the build night program? We have over 350 makerspaces, hackerspaces, fabrication labs, student groups, libraries, etc… subscribed to our mailing list. Each month we decide how many spaces will be able to participate. This depends on the sponsor and materials provided. How many countries participate in build nights? There are 45 countries represented in our makerspaces mailing list. Check them out: Albania, Argentina, Australia, Belgium, Bolivia, Bosnia & Herzegovina, Brazil, Canada, China, Colombia, Croatia, Egypt, France, Germany, Ghana, Greece, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, Kenya, Latvia, Lebanon, Mexico, Morocco, Nepal, The Netherlands, New Zealand, Norway, Peru, Poland, Russia, S. Korea, Serbia, Spain, Sweden, Taiwan, Tanzania, United Arab Emirates, United Kingdom, United States of America, and Zambia. By what criteria does Instructables measure the worth and success of Build Nights? There are 3 parties involved with every build night: Instructables, makerspaces, and the sponsors. When evaluating the success of a build night I try to consider everyones experience. For Instructables, we're mostly looking at the number of Instructables we get in and the quality (feature rate, topic, pictures, etc…). We also look at the number of new authors and community involvement. Makerspaces that are heavily involved on Instructables have their own group page. The sponsors are looking for brand engagement and authentic examples of their products being used. Sugru was thrilled to see lots of people talking on Twitter and Facebook about their build night experience. Voltaic Systems wanted a lower number of high quality projects made with their solar panels -- so we only accepted 15 spaces and made the acceptance process more difficult. Its not always easy to know the success level for the makerspace because I can't attend the events. From what I've gathered these are the goals of the makerspaces: connect with other makerspaces, learn new subjects, attract new members, free tools/materials, and create more opportunities for their members. In general, how successful have the Build Nights been? (Answered from the Instructables perspective) Most build nights have a 50-70% project return rate. The feature rate has been all over the board. The 2013 sugru feature rate was around 20% (we received 250 Instructables) and the Voltaic Systems feature rate was around 90% (we received 9 Instructables). The more build nights we run the higher I hope to get the project return rate because I'm excluding spaces that don't have a good posting record. In every event announcement I say "Not posting these Instructables will affect your chances to participate in future build nights" and I'm serious about it. I have a very detailed spreadsheet where I keep track of who has and has not posted. When it comes time to selecting spaces to participate I cross check my spreadsheet. That being said, every build night I give spaces a chance to explain why they weren’t able to post in the past. I completely understand life happens and I like to give out second chances! ================================================================ SUGGESTION BOX: Have questions to add to this FAQ? Have suggestions for ways to improve the build night program or new features to add? Submit them to our suggestion box. ================================================================

Topic by Carleyy   |  last reply


The Copyright FAQ for Knitters

The Copyright FAQ for KnittersI've been trying to work up a human-readable description of copyright and patent law, as it applies to Instructables. In my research, I found this really interesting resource for those looking to better understand copyright law, and to see how it differs when applied to various crafts. Some highlights:A knitting pattern is by default copyrighted, but utilitarian items (clothing, for example) are not copyrightable. You can make and give away items made from a copyrighted pattern. You may not make and sell items made from a copyrighted pattern. A recipe is a process and cannot be copyrighted; only the expression of the recipe can be copyrighted. A patent is required to protect a process.

Topic by ewilhelm   |  last reply



Would you like to see a FAQ on here?

Is there an interest in an FAQ? If so, what are some questions you'd like to see on it?

Topic by fungus amungus   |  last reply


FAQ Center (UNDER CONSTRUCTION!)

Hi there! I'm Keith-Kid, a regular member of Instructables.com, and just a kid that enjoys making stuff. This place is extremely friendly and welcoming, so feel free to jump into a conversation anytime!I noticed a lot of Frequently Asked Questions around the forums from new members, so I decided to do something about it. Be sure to check back here if you ever have a question. Or, just ask any member to help!So go out there, and Start Making!Instructrables has recently been upgraded, and changed. Please wait while I update this FAQ to the aforementioned changesTable Of Contents1. Getting Started 1.1.......................What is Instructables? 1.2.......................How does the Site make money? Is it profitable? 1.3.......................What is the Instructables Robot? 1.4...................... How can I get started here? 1.5...................... Who can Help me get started here? 1.6.......................What does DIY mean? 1.7.......................What can I write an Instructable about? 1.8.......................What's the difference between an Instructable and a slideshow? 1.9 ......................What is a video on Instructables 1.10....................How can I unpublish my Instructable?2. The Community 2.1.............................How can I make text effects like bold, italic , small text and upper small text? 2.2............................ Why doesn't my Instructable show up on the search page when I type the name? 2.3 ............................What kind of material is considered offensive? What kind of material should be avoided? 2.4.............................Why am I asked to give a number when I send a Private message to someone? 2.5.............................Can I ask for homework help on the forums? 2.6.............................How can I improve the community? 2.7.............................I've spotted an offensive ad! What can I do? 2.8.............................Can i post Instructables in other languages? 3. Other Instructables Features 3.1.............................How do contests work? 3.2.............................Are contests decided by the staff or the community? 3.3.............................What is Burning Questions? 3.4.............................Why is Burning Questions Held? 3.5..............................If Burning Questions is chosen by the staff, then why does it have a voting option for the Instructables? 3.6.................................If I submit 2 answers to Burning Questions, and they both win, do I get 2 Prize Packs? 3.7.................................What regions are eligible to participate in contests? 3.8 ................................How can my Instructable get more views? 3.9.................................How are Instructables featured? 3.10...............................What does an Instructable need to be featured? 3.11...............................How can I be selected to be able to feature? 4. Miscellaneous 4.1..............................Is it possible to intern at Instructables? 4.2 ..............................What is the Community Section? 4.3...............................What is the Marketplace? 4.4...............................I just saw a comment that says it was posted -xx minutes ago! What should I do?5. Current Events and Glitches5.1............................... I just rated an Instructable, but it says that it hasn't been rated yet!5.2 ...............................5.2 I just saw a comment that says it was posted -xx minutes ago! What should I do?1. Getting Started 1.1 What is Instructables?In a sentence: Instructables is a web-based documentation platform where passionate people share what they do and how they do it, and learn from and collaborate with others. A bit more in depth: It was created by Eric Wilhelm, a mechanical engineer, and launched in August 2005. Instructables is dedicated to step-by-step collaboration among members to build a variety of projects. Users post instructions to their projects, usually accompanied by visual aids, and then interact through comment sections below each Instructable step as well in topic forumsWhile a member of the Media Lab at MIT, Wilhelm co-founded Squid Labs, an engineering and technology company specializing in design and consulting. Instructables started as an internal Squid Labs project, which Wilhelm has since spun out as an independent company and acts as CEO.The original content focused mostly on such projects as building electronic or mechanical devices to solve common problems around the home. The scope of the project has expanded to include a larger array of categories, including arts and crafts, food, home, life, offbeat (first known as "not liable") and recently knex, transportation and tech. The site allows uploading of photos, diagrams, video and animation to help explain complex terminology and mechanisms in clear and understandable termsRead more about the history...Also, Read our About to see who works here1.2 How does the Site make money? Is it profitable?The site is mainly supported by ads, which you see in the sidebars and sometimes at the top of the page. Here is the full explanationIs Instructables profitable? - Almost. According to ewilhelm , the site generates enough money, that it usually covers its running costs, but not quite enough yet to be constantly profitable. 1.3 What is the Instructables Robot?The Instructables Robot is Instructable's mascot. His main function is to greet new members and alert members when they receive comments or messages. The robot is friendly and welcoming. You can easily find him around Instructables.You can tell the robot to alert you if you receive a comment in your personal settings. Likewise, you can tell him to stop doing so anytime at your personal settings.Nobody knows how exactly the robot came to Instructables.....time may tell......1.4 How can I get started here?You probably want to upload an image to your profile. You can do that here , as well as change some of your other account settings, like making View all Steps in one page your default.After that, check out How to make a great Instructable , The Guided Tour of Instructables, and the Help Group if you have any questions.1.5 Who can Help me get started here? ANYONE! all users are helpful. If you are confused, or have a question, don't be afraid to ask in the forum of a member of the community. Our members are happy to help newcomers get comfortable. You are more likely to get lots of help through an open thread, but you can ask questions privately (say, for a project in development) through the "Private Message" system.Have a look at other FAQs in the FAQ Section1.6 What does DIY mean?DIY means Do-It-Yourself. It means that instead of buying expensive stuff, make it yourself and save some money. The main idea of Instructables is to make things and share them with others. You will be surprised about how much money you could save if you do things yourself, and we are here to help you.1.7 What can I write an Instructable about?Bearing in mind our family nature, anything at all. If you're passionate about it, and want to tell others how you do it, then write an Instructable. If you're looking for inspiration, check out the Burning Questions to get you started. When you're a bit more familiarized try entering our Contests1.8 What's the difference between an Instructable and a slideshow?In an Instructable, you show detailed step-by step details on how to make or do something. A slideshow is used when you do not have enough documentation or material for a full Instructable. In a slideshow, you can show off projects or things that you have made. If you want to show something, but its not enough to fill an instructable, you can show pictures of it in a slideshow and write a short summary of the project.1.9 What is a video on Instructables? If you do not want to write a full instructable, but you want to present something that can't be fit into a slideshow, you can embed a video as an individual section.1.10 How can I unpublish my Instructable?It's a slightly-roundabout route, but if you click the edit function, then the publish, and unpublish options appears lower down the screen.2. The Community2.1 How can I make text effects like bold, italic , small text and upper small text?Read this helpful Section by Instructables member NachoMahma2.2 Why doesn't my Instructable show up on the search page when I type the name? Instructables are reviewed by the Robot and his human minions before being added to the public pages. Be patient, it may not have gone through the filter yet. Is your instructable lacking images? Sometimes instructables without images fail to go through the filter.On weekends and Holidays, where there is an influx of people posting projects, it may take longer than normal for it to show up in the Most Recents. If there is a problem with your work, someone on staff will PM you.Your instructable may have been caught by the spam filter. If it has, contact anyone in the Instructable team, and they will check it out for you. Just Be Patient.2.3 What kind of material is considered offensive? What kind of material should be avoided?Pornography - Any and all pornographic material is considered offensive. Posting images or links that include pornography is strictly prohibited. This is a family friendly site, children often browse this site.Language - If you wouldn't show it or say it to your headteacher at school, don't show or say it here.Insults and flaming - We have a "be nice" policy here. Please be positive and constructive with your comments or risk being banned from our site.Spam - Spamming, misleading links and site advertising on the forums, orangeboards, instructables, and Private Messaging are strictly prohibited. However, offers and advertising are allowed in the For Sale Section2.4 Why am I asked to give a number when I send a Private message to someone?This is called a Captcha. A captcha is when you are asked a number or word that appears as an image or sound. The purpose of this is to stop automated spam robots from spamming our Community.2.5 Can I ask for homework help on the forums?Of course! Our community is more than happy to help any way possible! Be sure to post in in the right category, because you wont get much science help in our craft section!2.6 How can I improve the community?You can help our community in many different ways:Be positive and constructive in your comments. We are a friendly and welcoming community, feel free to comment and incorporate yourself into forum topics and discussions. Our members are happy to help and guide newcomers in any way they can.Report offensive material. If you spot material that might be considered offensive or SPAM, click the "flag" button next to the comment or instructable. The Staff will review and take action if necessary.2.7 I've spotted an offensive ad! What can I do?If you spot an ad that qualifies as offensive, right click (not left click!) on it and choose properties. In Firefox, you can right-click and select "Copy Link Location". Copy the URL and report it to a staff member so they can take immediate action. If possible, it is also good to take snapshots of the page (On your keyboard, press Prt Scrn and paste it on MS paint or another image editing program) then present it to a staff member.2.8 Can I post Instructables in other languages?Of Course! We would be extremely happy to add instructables with languages other than english. If you need help with some words or terms, feel free to ask around on our community! Proper grammar and spelling are compulsory in any language. We have a lot of users who are fluent in many languages including Spanish, German and French.3. Other Instructables Features3.1 How do contests work?There is no complete answer to that question, as different contests have different rules. Usually, a contest follows these steps:1) A staff member usually announces that a new contest is coming, and what the theme will be, so members will start getting ideas2) The Contest is announced in the front page3) A staff member will post an instructable on how to enter the contest, and will show full details about it.4) The Contest is then opened for entries.5) After a specific time, the entry deadline closes and the winners are chosen either by the staff of by community votes (Depends on the contests specific rules) and are announced.There are two kinds of contests:- Regular contests are the ones that last a month. These contests also set the month's specific theme. These contests are usually sponsored by a company that is related to the theme. For this reason, prizes almost always come from the companies themselves. Regular contest feature more expensive prizes.- Speed contests are those that only last a predefined time. They are called speed contests, because users have to submit their entries before a close deadline. Since they last such a short time, there are usually more than one speed contest can be held in one same month. In some rare occasions, there can be more than one active Speed Contest at a time. Speed contests usually have more and less expensive prizes than regular contests.3.2 Are contests decided by the staff or the community?It depends on the Contest's specific rules. When an Instructable is chosen by the community, the winners may have multiple categories, such as best rated, most viewed, most votes and others.When the staff decides the winners, they usually take the community's reaction to it as a factor in choosing the winners.3.3 What is Burning Questions?Burning Questions is a regular event in Instructables, where the staff (usually Noahw since he manages it) posts a list of Wanted Instructables that haven't been made.Users submit their entries and the best instructable that answers a question on the list wins a prize. Since there are so many prizes (One for each question), Burning Question Prizes are less expensive, so there can be more prizes.(Originally, the prize was an Instructables Shirt, but as the community grew, more instructables were requested, and the prizes were getting more expensive, so now, the prize is usually a Prize Pack consisting of various Instructables Merchandise)When a winner is chosen, the staff will send him/her a Private Message telling them how to claim their prize.The staff publishes a new round every now and then (currently, we should be expecting Round 5.)Rules:Although the rules are posted in the same posts that the questions are announced, these rules are important, and if not followed, an entry wont qualify: - The Instructable must have pictures in every step. These pictures must be related to the instructable. - The Instructable must be of good quality. It must have proper grammar and steps must be clearly understandable and detailed - The title must be the same as the question, or else it wont be accepted. If the question is how to fold a shirt, the Instructable's title must be exactly that.3.4 Why is Burning Questions Held?Burning Questions has 2 purposes:Getting people to create Instructables wanted amongst the communityImproving the site's "googleabilty". Since many questions start with How to...., it helps the site appear more prominently amongst search engines like Google.3.5 If Burning Questions is chosen by the staff, then why does it have a voting option for the Instructables?Burning Questions winners are chosen by the staff. The voting option is available because Burning Questions has been implemented into the new Contest Section, because of various reasons.Although it is the staff who choose the winners, the community's response to the instructables is also a factor in the decision. 3.6 If I submit 2 answers to Burning Questions, and they both win, do I get 2 Prize Packs?No, if you answer 2 questions in one Burning Questions Contest, the staff will send you a surprise extra gift along with your Prize Pack.3.7 What regions are eligible to participate in contests?Some contest are open to any country, while sadly others are not available for some countries. Take your time and carefully read the rules and details of contests so you can save time or make arrangements.3.8 How can my Instructable get more views?The main thing you can do to get more views is to make something interesting and likable.If you want more views, try posting a forum topic so people can learn about it. Instructables with good and clear steps might even be featured on the Front page- the most trafficked part of Instructables.com3.9 How are Instructables featured? Members who have shown to be very helpful inside our community are handpicked by the Instructables staff and are given the ability to feature an instructable is they consider it meets the criteria for Featuring. As Instructables are featured they appear on the homepage, the most trafficked part of the site. 3.10 What does an Instructable need to be featured?It needs to be good - clear, easily-read Instructions, plenty of useful photos, in focus and probably using your camera's Macro Function (Click here for additional info on using the macro setting) , and additional notes on the images to explain extra points.You should use full and proper language - capitalize sentences, check your spellings and don't use sms-speak. (cuz-because). English isn't compulsory, but correct grammar and spelling are.If it is original idea, a novel approach or an enjoyable read, with carefully-arranged images, then it is more likely to be featured.3.11 How can I be selected to be able to feature?If you produce consistently-good Instructables, and especially if you take an active, useful part in the community, you may be approached by Eric ( ewilhelm ) to join the team. There is no set number of members of the team, but new members are not often invited.4. Miscellaneous4.1 Is it possible to intern at Instructables?-Check regularly at our We're hiring page for more info. Instructables member TimAnderson is also running an internship program documenting Heirloom Technologies 4.2 What is the Community Section?The Community Section contains the Forums:You can choose to either view topics by category or View All in an option at the top of the pageGeneral Forums - General Discussions of DIY. You can talk about anything, not just DIYMarketPlace - Forums for job offers, Internships, Kit sales and other sale sin generalHelp - Ask for help, report a bug, or just give your feedback on Instructables4.3 What is the Marketplace?The MarketPlace is a special part of the forums dedicated to bussiness like Job offers, Interships, Kit sales, and other sales in general.You can sell your stuff, or buy someone else's. This section is still fairly new, so some changes might still happen.5. Current events and Glitches5.1 I just rated an Instructable, but it says that it hasn't been rated yet!The current rating system is fairly new. Before, the rating system was simply the option to give it a plus, or a minus.Our new Rating System is based on the one described hereThe new rating system, consists of the ability to give it a rating from a scale of 0.0 to 5.0. This system is represented by a line of stars. You may also give ratings like 3.5 and 2.5.This new system is not yet complete, and there are a few bugs to work out. Currently when you rate something, it is queued to be processed during Instructables' overnight Bayesian rating algorithm-run and does not update immediately.Until it is complete, you might notice somethings, like for example, that most Instructables will have a rating lower than 4.5.2 I just saw a comment that says it was posted -xx minutes ago! What should I do?This is a small glitch we are currently experiencing. The staff is aware of this, so please, do not report this as a bug or make a forum topic about it. It is nothing serious and out staff are working to fix it. Instructables runs on a couple of servers. Sometimes, the serves receive different information, and when they each compare their information, they might get confused and say that the post was made at a time that is not possible.The following people have contributed to this FAQ:* Kiteman* NachoMahma* Brennn10ewilhelmThanks for your help!I hope this Section has helped answer any questions you might have.Have a question that should appear here? Private message me and I will answer as soon as I can.

Topic by Keith-Kid   |  last reply


[FAQ] Why isn't my Instructable showing up?

Here is a question that is often asked on this site.Why isn't my Instructable showing up in the Most Recents?Well there could be a variety of reasons:Be patient, it may not have gone through the filter yet.Is your instructable lacking images? Sometimes instructables without images fail to go through the filter.Your instructable may have been caught by the spam filter. If it has, contact anyone in the Instructable team, and they will check it out for you.On weekends, where there is an influx of people posting projects, it may take longer than normal for it to show up in the Most Recents. Just Be PatientAfter a few days, and it is not showing up, contact the Instructable team.I hope this helps!

Topic by Brennn10   |  last reply



A FAQ link with the most common questions rather then a bulky forum section

So I saw someone asking a FAQ question again today. Ofcourse what I'm about to propose doesn't stop them all from still doing this but will stop many. What I propose is that we delete the "FAQ" part of the forums and change this by adding a quick link with "FAQ" next to "Home browse Community Submit" Now what would this link do? Well I propose we take the most common questions like "My instructable doesn't come up in search" "My ible is not in the contest and it was enterd" "I'm featured what does it mean?" and so on. Answer these questions and make a FAQ section out of them like other sites do. This way everybody sees a clearly visible link in the top of the screen so they won't go posting forum topics that are answerd in one question again. Like said above this won't stop them all but will stop many useless topics that are answered in one and the same question. This way the number of topics will also decrease and the speed of the site will go up :) I want to volunteer for making the FAQ section if needed :) Help is always welcome but before I begin I would like to know what the team and other members think of it. So to sum it up in short. I want to put a link named "FAQ" next to "Home browse Community Submit" which brings you to a number of common questions with the answers to them. (note that this will not be a forum topic). I also want to delete all the topics in the FAQ because we would have taken the most common out of them. The section should remain for questions that have not appeared in the FAQ. When the FAQ text updates those can be deleted again. Now what are your thoughts on this matter? Aren't you tired of responding every 2 weeks or so a question that has been asked like 50 times already?

Topic by MichelMoermans   |  last reply


Contest FAQ (Frequently Asked Questions)

Here at Instructables we run a ton of contests! We also get asked a ton of questions about those contests. Below is a list of the contest questions we get asked most frequently and also some questions that we feel could use a little more explaining. (Let’s be honest - reading the official rules is not fun.)Please ask addition questions in this forum topic - I'm sure there are some we have not covered!Important links: List of upcoming contestsContest suggestionsPrize suggestions General Contest Questions How do you choose which contests to run?We do this in a few different ways.Contests are planned based on past contest themes, what’s trending in search, which categories/channels need a little love, new site features or if there’s a certain type of content we want. Contest ideas also come from staff meetings and through the official contest idea forum topic.I have an idea for a contest! How do I tell you guys?Please post here and let us know! We can’t run all of them, but we love seeing the ideas you guys come up with. How do I win a contest?Post something awesome! Check out this collection of tutorials that will tell you how to write a great instructable. Why do Instructables employees enter the contests?We enter contests to set the bar and give an example of the type of entries we want in the contests. We're not able to win them, though!It's important to note that several employees were authors on the site before they worked here, though, so you might see some wins in our achievements! :) Entering Contests Can I enter if my country is not listed in the official rules?Yes! You can definitely enter.However, you must have a mailing address in an eligible country to win. If you have a friend in the US or another eligible country that can receive your prize, go ahead and enter!You can read more about our progress to add more countries to the eligible shipping locations here. I live in -----, why can't I enter?!Chances are your country has incredibly strict laws regarding gambling, sweepstakes and contests. We try our best to play by the rules, and if we can't meet the minimum requirements to run a contest in your country, we don't run them there!That's the easy answer. The hard answer is that it's very complicated and involves lots of risk and scary legal language. Why isn't my entry showing up in the contest? I entered three minutes ago!Real humans look at each entry! This means it take take a while sometimes. We work standard office hours, 9-5ish PST. We tend to moderate first thing in the morning, Monday-Friday.If you enter at the end of the work day or over the weekend, you may have to wait until the next business day to be accepted. Why can I only enter one contest with one Instructable?It’s all the spirit of fairness. In the past, we've had popular instructables sweep multiple contests with huge wins. This new rule will allow more authors to win! Why was I rejected from the contest?The number one reason for this is not fitting the contest theme - we try our best to explain the sorts of entries we’re looking for on the main page of each contest, so double check your eligibility there.We also sometimes make mistakes or encounter bugs during the approval/denial process. (Checking the wrong box, clicking the wrong button, breaking the back end of the site) It’s rare, but it happens! We’re human and can’t help it, but we do our best to right those mistakes as soon as we know they happened! Why can’t I enter an instructable I published before the start date into the contest?We want to see NEW and exciting content built just for the contest. If we allowed old instructables in, we’d just see the same things over and over again. Plus, the number entries in the contests would make it very hard to choose finalists and winners.Keep in mind that simply republishing an old project will not make it eligible - we check for that. ;) Can I edit my Instructable after it's entered in a contest?Short answer: YES!Long answer: You can make any modifications you want to an Instructable that's already entered! We get so many entries that there's absolutely no way we'd be able to police it even if we wanted to - but it's never something we want to discourage.Improvement is always a good thing as far as I'm concerned. :)However, we must caution you: it's best to get those changes done before voting closes. The voting period matters the most because that's the time that we start looking into picking finalists.Another slightly related caveat: don't publish a mostly empty instructable and try to fill it after the contest ends. We're starting to see this happen more often, always with a promise that updates are coming. You can never tell when we'll be reviewing it as a possible finalist, so chances are you'll get overlooked going about it that way. We are currently looking at 50-300 entries per contest, so anything incomplete doesn't stand a chance these days! Finalist & Winner Selection When are the finalists selected?Finalists are selected starting the Tuesday after the contest closes. The finalist selection process normally ends Thursday of the same week, depending on how tricky the contest is and how many people give input. How are finalists selected?Finalists are selected by site staff based on the following criteria: clarity, ingenuity, creativity, quality of presentation, and execution of the Instructable (as noted in each contests' official rules section). You can make your instructable stand out further by including the following: Good photos! Pretty photos put you five steps ahead of all the other entries already, honestly. We're going to want to click through and look at it as soon as we see it if it's pretty! Good explanation of both WHAT the project is and HOW you made it. Sometimes it can be really hard to figure out what we're looking at. (Personally, if I have to spend several minutes staring at photos and reading to understand it, I'm not very excited about it anymore.) Try to convey the project through both photos and video if it's needed. For example - if it's a rocket, upload a video of it in action! A good story! I read more projects than you could ever imagine every month. I love it when an author takes time to explain why they made the project, or documents the errors they made along the way. That makes an instructable so much more enjoyable to read. :) Citing your sources/inspirations - look, we realize there's hardly an original idea on the internets anymore, so we can't fault you for that. But it's only fair to give credit where credit is due. We like that. Plus, it sometimes makes for an awesome story. Creativity! Look, I cannot even begin to tell you how many paracord bracelets, Altoid tin survival kits and Iron Man arc reactors I have looked at. My eyes glaze at the thought. Don't just go for the common and easy, take that project and put a new spin on it!!Relation to prize. In some contests, we offer a Judges Prize. Entries that qualify for this prize are also taken into consideration. We always suggest authors read their own work with an objective eye. Does it make sense if you aren’t familiar with the subject already? Did you provide enough description? Are the photos understandable? How many finalists are there?To find this out easily, go to the contest page and look at the total number of prizes to be awarded. The number of finalists for a given contest will match the number of total prizes. Why wasn't my project chosen as a winner/finalist?This can happen for all kinds of reasons, honestly. See the "How are finalists selected?" question above for a more in depth explanation of what we're looking for.The most important thing to stress is that we are going through TONS of entries for every contest, so it's important to set yourself apart. Choose a clear and concise title, tell us a story, share great photos, explain the project well. If there are projects similar to yours in the contest already, make sure your project exceeds theirs in awesomeness. Also remember that competition is fierce in the contests - there are always a LOT of amazing entries. When it comes down to selecting winners sometimes it's the little things because when you're comparing awesome to awesome the little things are all you can look at. So be detailed orientated when writing your instructable. Judging Who judges the contests?This is typically a mix of Instructables staff and authors on the site (your peers!). Each contest is normally assigned 10-50 judges.Lately we’ve had an average of 15-20 judges complete the process. I always try to add as many judges as possible, because more judges means the judging is more fair and helps to reduce bias. How can I help judge a contest?If you’re interested in helping us judge, check out this forum topic! To judge, you must have published at least one Instructable.We send out PMs to judges on the Friday after a contest closes. How do I judge a contest/access the judging ballot?We’ve written up an Instructable over it! You can find it here: https://www.instructables.com/id/How-to-Judge-a-C...Once you're added to the list of judges, you’ll be able to access the ballot. Prizes How do you pick prizes? Can I suggest prizes?We've got a pretty small budget prize here, so it's a mix of trying to be frugal but still give you guys something fancy. We try to order most of our prizes from Amazon.com because they have reliable shipping and tons of options.If you'd like to suggest an awesome prize, do it here! I don't like these prizes, can I trade?Short answer: nope!Long answer: we choose prizes well ahead of time and order prizes at the start of the contest (for 95% of what we run) and we don’t make substitutions. We typically have anywhere from 100-250 winners a month (and increasing all the time!), so it’s not feasible to give choices and sub things out. Only three of us on staff work with ordering the prizes and shipping them out, so that would be lots of work!However, we have allowed winners to switch prizes with another winner on occasion (both parties must agree and let us know before we ship them!) and we’re fine with you selling your prize somewhere else. How do I get my prize if I win?When contest winners are announced, we’ll send you a message with a form to fill out. Make sure to fill this out completely and remember that we require a phone number and that we can’t ship to P.O. boxes.Winners are responsible for any trade tax or tariffs incurred for shipping to your location. We cannot reduce the value of the prize so you pay less tax (nice try, though, you sneaky hobbit!!). When will my prize ship?We try to ship prizes as soon as possible! 75% of our contests have prizes that are easily shipped right away and you should receive notification of shipment within a week or so.Sometimes we do have to order items AFTER the contest ends or wait for a sponsor to ship the items. If we think there will be a delay, we’ll let the winners know. We’ve been trying very hard to make sure we’re reaching out and updating winners about prize statuses.Also: VERY IMPORTANT - the sooner all winners give us their contact info, the sooner we can make big orders of custom sizes. Sometimes there’s a huge delay just because we’ve got one straggler. Be a good winner and let us give you prizes, dangit!!

Topic by jessyratfink   |  last reply


Negative Instructables?

For some reason, my profile says I have -2 instructables. What's the deal?

Topic by Argool   |  last reply


can't save to favorites?

I get error message 400 when I try to save to favorites.  Is this something we can't do?

Question by sdartnut   |  last reply


what does membership get me?

What is there about becoming a member that is special?  What can a member do that someone else can't?

Question by whisperonthewind   |  last reply


I'm new to Instructables. What are some good tools to have?

I got hooked to Istructables with things like the desktop trebuchet, the marshmallow shooter, the $10 dollar Mont Blanc pen, and the PVC bike repair stand. There is so much more I want to do on Instructables, but I don't have the tool capabilities to do so. Where is a good place to start in terms of what kind of tools I should get?

Topic by GoCubs252   |  last reply


Welcome to Instructables

On this page you can find links to some of our most frequently asked questions. What is this site? Instructables is a place that lets you explore, document, and share your creations. How do I post an Instructable? We offer a free and easy online class to coach you through posting your first Instructable or you can just wing it and start a new one today. How do I get help improving my Instructable?Ask the community for help in The Clinic. How does my Instructable get featured? The best way to get your projects featured is by following the Featuring Guidelines. Where can I learn more about contests? Our Contest FAQ has all of the information that you need to know about contests. What contests are launching soon? Check out our list of upcoming contests. Are you on social media? Yes! Follow us on Pinterest, Instagram and Twitter. How do I contact Instructables directly? The best way to contact us is through our Contact Page.

Topic by randofo   |  last reply


Why do Editors picks come up before Recent? Answered

I think it makes more sense for the most recent questions/answers to come up automatically because they are fresh and possibly requiring comments and answers. At the moment Editors Picks comes up (seem to stay the same ones for a long time) and may be old and already recieved many comments. Is there a reason for this?, if so it escapes me. When I log in I'm more interested in "whats new" than picking through the "old" to find something new.

Question by craftyv   |  last reply


Just wondering about what you actually get in a Pro Membership.

I was doing some poking around the site and found this page: https://www.instructables.com/account/give it talks about a few things that I haven't heard of or noticed since being pro for a while. These include: WYSIWYG Rich Text Editor? I did not notice the editor change at all when upgrading to a pro membership. Is this talking about being able to access and edit the HTML of an instructable? Author Intro - I am guessing this is different than the author bio, so I am not sure... Private Instructables - I have never seen an option to make an instructable private. --- After typing the above out, I logged out of my account and went to the signup page here: https://www.instructables.com/account/gopro and it seems the author intro and the WYSIWYG rich text editor seems to have disappeared however the private instructables feature is still there. If it has any meaning, I didn't pay for pro, I am using one my free 1 year pro memberships for getting a hompage feature.

Topic by PerfectPixel   |  last reply


I want to get into making LED art but I have no idea where to start.?

Where can I find some very VERY basic starting info, FAQs, or tutorials?

Question by bicycle_samurai   |  last reply


How to delete a duplicate group? Answered

I tried to delete a duplicate group that did not work when I tried to use the Spanish letter n with a tilde in the group's title. The group incorrectly appears as Instructables en español How do I delete this group?

Question by blkhawk   |  last reply


Noobariffic LED art question (Batteries)

Uhh, hi everyone. I have a super basic question, and I'm going to appeal for help because I'm running low on time for this project. I have a signpost I want to light up with about 100 3volt LEDs. What kind of power source should I be looking at? Would 4 AA batteries suffice? I've seen online calculators for determining resistors, but not for an ideal power source. Do I just wire up as many batteries as I want and get the proper resistors? I'd like this thing to light for at least eight hours on a full charge, so I can swap batteries daily. Thank you in advance! I'm dumb!

Topic by bicycle_samurai   |  last reply


I want to start making LED art, but have no idea where to begin.

Is there anywhere I can find a very VERY basic tutorial? FAQs? Some dos and don'ts? List of commonly needed tools and materials.... stuff like that? I would very much love to craft a small outdoor LED art signpost for my tent at a festival next month. Thank you! Peace and love!

Topic by bicycle_samurai   |  last reply


Basic LED art question re: batteries!!

Uhh, hi everyone. I have a super basic question, and I'm going to appeal for help because I'm running low on time for this project. I have a signpost I want to light up with about 100 3volt LEDs. What kind of power source should I be looking at? Would 4 AA batteries suffice? I've seen online calculators for determining resistors, but not for an ideal power source. Do I just wire up as many batteries as I want and get the proper resistors? I'd like this thing to light for at least eight hours on a full charge, so I can swap batteries daily. Thank you in advance! I'm dumb!

Question by bicycle_samurai   |  last reply


FAQ: How Do I Format Text?

Now a full-fledged iBle! This topic is no longer being updated. Go here for latest version. 2009-01-22 IblesFormatting This shows some of the formatting codes available on Instructables. Please do not use the comments for testing. I suggest using your Orangeboard. TIA. 1. Font Styles 2. Headings 3. Paragraphs 4. Preformatted Text 5. Links 5.1. Escaping Links 6. Macros 7. Miscellaneous 7.1 Horizontal Rule (HR) 7.2 Bullets 8. Underlining 9. "Special" Characters

Topic by NachoMahma   |  last reply


FAQ: How Do I Search Instructables?

20080605. I exchanged a few PMs with Eric and it seems that even the Instructables staff is not sure about what's going on with the search feature. So ... until they can get this all straightened out, Eric recommends that we use the "site:www.instructables.com" option on Google for advanced searches. The Lucene search should work for most simple searches.. From Google's Web Search Help Center: "You can use Google to search only within one specific website by entering the search terms you're looking for, followed by the word "site" and a colon followed by the domain name. For example, here's how you'd find admission information on the Stanford University site: admission site:www.stanford.edu. Eg, "NachoMahma site:www.instructables.com" will search for my username on this site.. Try Kiteman +Law site:www.instructables.com.. . Sorry for any confusion I may have caused. . Instructables uses the Lucene search engine. I'm still trying to figure a lot of this out (can't seem to get +/- to work right, for one). As I gain insights into what is going on, I will share them here.. This is a Work In Progress and may probably contains many errors. Use at your own risk, but I can't imagine any of this causing any harm - the worst it should do is generate an error message.. Some Lucene features may not work at Instructables - I'll erase those as I become aware of them.. If you know of any search tricks or tips, or can provide any insight as to how all this works with Instructables, please PM me (or leave a comment). I'm open to all suggestions.. The following is from Lucene Query Parser Syntax (copyright 2006 by The Apache Software Foundation. Distributed under Apache License, Version 2.0). About all I've done, so far (2008-06-01), is format it for Instructables. Any info I've added is noted in the text.. Note: I can't figure out how to escape a carat (formatting code for superscript), so I've substituted "/\" (slash + back-slash), except in the pre-formatted examples.Table Of ContentsOverviewTermsFieldsTerm Modifiers (Wildcard Searches, Fuzzy Searches, Proximity Searches, Range Searches, Boosting a Term)Boolean Operators (AND, +, NOT, -)Grouping (AKA parentheses - nacho)Field GroupingEscaping Special CharactersTerms. A query is broken up into terms and operators. There are two types of terms: Single Terms and Phrases.. A Single Term is a single word such as "test" or "hello".. A Phrase is a group of words surrounded by double quotes such as "hello dolly".Multiple terms can be combined together with Boolean operators to form a more complex query (see below).Fields. Lucene supports fielded data. When performing a search you can either specify a field, or use the default field. The field names and default field is implementation specific.. You can search any field by typing the field name followed by a colon ":" and then the term you are looking for.. As an example, let's assume a Lucene index contains two fields, title and text and text is the default field. If you want to find the document entitled "The Right Way" which contains the text "don't go this way", you can enter:title:"The Right Way" AND text:goortitle:"Do it right" AND right. Since text is the default field, the field indicator is not required.. Note: The field is only valid for the term that it directly precedes, so the querytitle:Do it rightwill only find "Do" in the title field. It will find "it" and "right" in the default field (in this case the text field).Need to get a list of fields used on Instructables. - nachoWildcard Searches. Lucene supports single and multiple character wildcard searches within single terms (not within phrase queries).. To perform a single character wildcard search use the "?" symbol.. To perform a multiple character wildcard search use the "*" symbol.. The single character wildcard search looks for terms that match that with the single character replaced. For example, to search for "text" or "test" you can use the search:te?t. Multiple character wildcard searches looks for 0 or more characters. For example, to search for test, tests or tester, you can use the search:test*. You can also use the wildcard searches in the middle of a term.te*t. Note: You cannot use a * or ? symbol as the first character of a search.? and * work just like DOS wildcards, except you cannot use them as the first character - nachoFuzzy Searches. Lucene supports fuzzy searches based on the Levenshtein Distance, or Edit Distance algorithm. To do a fuzzy search use the tilde, "~", symbol at the end of a Single word Term. For example to search for a term similar in spelling to "roam" use the fuzzy search:roam~. This search will find terms like foam and roams.. Starting with Lucene 1.9 an additional (optional) parameter can specify the required similarity. The value is between 0 and 1, with a value closer to 1 only terms with a higher similarity will be matched. For example:roam~0.8. The default that is used if the parameter is not given is 0.5.Proximity Searches. Lucene supports finding words are a within a specific distance away. To do a proximity search use the tilde, "~", symbol at the end of a Phrase. For example to search for a "apache" and "jakarta" within 10 words of each other in a document use the search:"jakarta apache"~10Range Searches. Range Queries allow one to match documents whose field(s) values are between the lower and upper bound specified by the Range Query. Range Queries can be inclusive or exclusive of the upper and lower bounds. Sorting is done lexicographically.mod_date:[20020101 TO 20030101]. This will find documents whose mod_date fields have values between 20020101 and 20030101, inclusive. Note that Range Queries are not reserved for date fields. You could also use range queries with non-date fields:title:{Aida TO Carmen}. This will find all documents whose titles are between Aida and Carmen, but not including Aida and Carmen.. Inclusive range queries are denoted by square brackets. Exclusive range queries are denoted by curly brackets.Boosting a Term. Lucene provides the relevance level of matching documents based on the terms found. To boost a term use the caret, "/\", symbol with a boost factor (a number) at the end of the term you are searching. The higher the boost factor, the more relevant the term will be.. Boosting allows you to control the relevance of a document by boosting its term. For example, if you are searching forjakarta apacheand you want the term "jakarta" to be more relevant boost it using the /\ symbol along with the boost factor next to the term. You would type:jakarta^4 apache. This will make documents with the term jakarta appear more relevant. You can also boost Phrase Terms as in the example:"jakarta apache"^4 "Apache Lucene". By default, the boost factor is 1. Although the boost factor must be positive, it can be less than 1 (e.g. 0.2)Boolean Operators. Boolean operators allow terms to be combined through logic operators. Lucene supports AND, "+", OR, NOT and "-" as Boolean operators(Note: Boolean operators must be ALL CAPS).The OR operator is the default conjunction operator. This means that if there is no Boolean operator between two terms, the OR operator is used. The OR operator links two terms and finds a matching document if either of the terms exist in a document. This is equivalent to a union using sets. The symbol || can be used in place of the word OR.. To search for documents that contain either "jakarta apache" or just "jakarta" use the query:"jakarta apache" jakartaor"jakarta apache" OR jakartaAND. The AND operator matches documents where both terms exist anywhere in the text of a single document. This is equivalent to an intersection using sets. The symbol && can be used in place of the word AND.. To search for documents that contain "jakarta apache" and "Apache Lucene" use the query:"jakarta apache" AND "Apache Lucene"+. The "+" or required operator requires that the term after the "+" symbol exist somewhere in a the field of a single document.. To search for documents that must contain "jakarta" and may contain "lucene" use the query:+jakarta luceneNOT. The NOT operator excludes documents that contain the term after NOT. This is equivalent to a difference using sets. The symbol ! can be used in place of the word NOT.. To search for documents that contain "jakarta apache" but not "Apache Lucene" use the query:"jakarta apache" NOT "Apache Lucene". Note: The NOT operator cannot be used with just one term. For example, the following search will return no results:NOT "jakarta apache"-. The "-" or prohibit operator excludes documents that contain the term after the "-" symbol.. To search for documents that contain "jakarta apache" but not "Apache Lucene" use the query:"jakarta apache" -"Apache Lucene"Can anyone compare/contrast AND/+ and NOT/-? - nachoGrouping. Lucene supports using parentheses to group clauses to form sub queries. This can be very useful if you want to control the boolean logic for a query.. To search for either "jakarta" or "apache" and "website" use the query:(jakarta OR apache) AND website. This eliminates any confusion and makes sure you that website must exist and either term jakarta or apache may exist.Field Grouping. Lucene supports using parentheses to group multiple clauses to a single field.. To search for a title that contains both the word "return" and the phrase "pink panther" use the query:title:(+return +"pink panther")Escaping Special Characters. Lucene supports escaping special characters that are part of the query syntax. The current list special characters are+ - && || ! ( ) { } [] /\ " ~ * ? : \. To escape these character use the \ before the character. For example to search for (1+1):2 use the query:\(1\+1\)\:2. That's it. All corrections and/or clarifications are welcomed.

Topic by NachoMahma 


Am I Allowed to Make a Forum Topic as a FAQ for my Instructable? Answered

Am I Allowed to Make a Forum Topic as a FAQ for my upcoming Instructable?: SpectrumLED I started writing an F.A.Q in the Instructable, But I don't think it looks right... Am I allowed to make it as a Forum Topic? Or anything else?

Question by Yonatan24   |  last reply


New 'What To Do If Harassed On Instructables' iBle/FAQ

. A few of us have collaborated on a new iBle: What To Do When Harassed On Instructables. It's more of a FAQ than an iBle, so I'm announcing it here.

Topic by NachoMahma   |  last reply


what why when how about gear, FAQ about gear, plz answer me

What is gear? it convert speed into power? how to calculate it?. plz explain with pictures or videos. here i wish to say my experience, i bought a toy car. i opened it, removed the mechanism, i powered the mechanism and try to hold motor shaft, it was stopped running, so all gear also stoped rotating, later i try to hold the gear which is towards the wheel, but i was unable to stop motor, i felt surprise how that gear resist my huge force and still rotating. i shocked, then i dont even know those will be called gear. i finally found in net, now i m here to know what why how about gear if i understand these better, i can build alot of things in my home

Question by graghavendra   |  last reply


"Bug" - Issue with image importer converting .PNG files to .JPEG

Update: posting this topic further illustrated that something weird is happening with how Instructables handles images. The image as shown above shows both left and right sides with the text blurry. If you click on the image, the left stays blurry (as it should because it was) whereas the text on the right shows clear and sharp. I give up on the root of the problem, but it's frustrating how the image quality gets messed up.I put "bug" in quotations since you never know if it's a bug, unintended side effect, technical limitation or external problem. I'll let Instructables be the judge. Regardless, I thought it might be worth bringing attention to since I'm probably not the only one to have experienced it.While I use RAW images converted to JPEGs in Lightroom for my main project images, which tend to look beautifully, I normally use Canva to design my title images. Mainly due to being able to add text, shapes or any other elements in layers. Canva exports by default in .PNG format, which is probably the most popular image format after .JPG due to its support of transparencies and lossless compression. For that reason it's normally preferred for header images and graphics. I tend to use a ratio of between 4:3 and 16:9 to make things easier for the file uploader, as well as a longest edge of 1024px since that looks like it's what Instructables wants so it won't be resized. Despite trying to make things easy for the uploader, my title images have always been the blurriest, noticeably more so than the rest of the images or the image uploaded. Today I finally did some tests and found out that on import of .PNG files, the uploader noticeably deteriorates the quality of the image when converting it to JPEG, even if it isn't resizing it. A picture is attached as evidence. It seems to particularly affect portions which are highly saturated or text, greatly desharpening it. It makes a good image look like it's been carelessly edited. For the image to maintain its quality, I have to take the original .PNG and convert to .JPEG on my own (Photoshop), and then upload the .JPEG to Instructables (instead of the .PNG). As a user, what I'd optimally like to see done is: Fix the importer to properly support .PNG images without deteriorating the images. It is way too popular a format to not accept. I do realize it might be a Canva color space or other such issue, but it probably wouldn't be limited to that program anyway. Nonetheless, if this isn't possible, I'd be happy for the system to simply not accept .PNG and to throw-out an error message telling me to convert the images on my own and only upload .JPG. That would at least avoid image quality being inadvertently affected. Make available an up to date FAQ page where all information regarding images is available: what formats are natively accepted, what is the optimal ratio for images, what is the optimal resolution for images, to what sizes an image is resized on import, or any other relevant technical image details. I've researched this multiple times in the past and there are a lot of people with the same questions in the forum. Especially when it comes to sizes and ratios (cut off images, etc). Most of the information is from years ago (ex. 2010) and cannot be trusted to be up to date. Up to now I've uploaded plenty of 18 megapixel images when it is unnecessary given that the largest size shown, I think, is "LARGE" size at 1024px (I believe). A place to educate ourselves objectively on this particular site's preferences would be appreciated.Anyway, thought I'd comment this since it was a relief to finally find out the origin of the problem.

Topic by MillennialDIYer   |  last reply


Chronological order for comments

How can I get comments to display in chronological order. They are completely random now, and I see no faqs on this.

Topic by danstax   |  last reply


Editing possible after publishing?

I really think there should be a FAQ for such basic questions, but I couldn't find one sooo... Wondering if it's possible to edit your instructible after you publish it?  Or is it possible to retract it (delete or unpublish)?

Topic by ceremona   |  last reply


Site Feedback

Hello, I have some feedback regarding the site. First, the page width is a little too big. On 1024x600 resolution there is a horizontal scrollbar, which seems kind of useless to me and takes up vertical space. Secondly, the link named Feedback on https://www.instructables.com/about/contact.jsp directs to https://www.instructables.com/community?categoryGroup=help&category;=faq, as does the link named FAQs on the Contact Instructables page. Third, a button to hide the search header would be a nice feature, it's unnecessarily big and takes about 1/6th of vertical space on resolution of 1024x600. I hope I explained understandably and that you can make some tweaks. Firefox 21.0 Windows 7 Home Premium

Topic by rein365   |  last reply


Movies

I looked through the FAQs and Help, and did a search and I am still lost. I can not view any movies. Do I need to download a viewer of some sort? Be gentle, I'm new to most of this computer stuff. Thanx, S.

Topic by Metroschultz   |  last reply


I can't seem to import a hyperlink into my instructable. What is the procedure, exactly? Answered

Also, I'm sure it's just my inexperience, but I'm finding it difficult to find answers to simple questions like this in the FAQs, Community and help files. Am I doing something wrong? Thanks.

Question by kmpres   |  last reply


Any way to view hit counts for forum topics?

. Is there any way for us users to monitor how many hits a page at Ibles is getting? In particular, I would like to track how many hits Kiteman's Law (spread the word) and similar FAQ pages are getting.. TIA

Topic by NachoMahma   |  last reply


Gizmodo rips off Instructables?

Gizmodo recently posted about vodka-infused gummi-bears, but presented it as if it was their own idea. I tried to leave a comment to point out that the process was posted here, nearly three years ago, but I was informed that my post was "spam" because it was "too short", and "contained too many links".  How is one link "too many"?  I tried again, typing a lot more, and including no links at all, yet that comment mysteriously did not appear, either. So, I checked the FAQ, to see if I'd accidentally broken some rule, and I found it:  according to their FAQ, Gizmodo "only approve the comments we love". To me, only allowing comments that say nice things about the site, and preventing plagiarism (or mistakes) being highlighted, is censorship, and cowardly. Rant over - there doesn't seem to be any way to contact Gizmodo with actual criticism.

Topic by Kiteman   |  last reply


STL-Preview?

Hey, I've already posted this within the FAQ-Area, but since nobody responded it might be better suited for this area. I have an instructable with 3D printed parts, so I added the *.stl-Files, that can be used for 3D printing. However I dont see them correctly within my instructable. Is there a way to get them displayed correctly with a preview-image? thanks in advance!

Topic by aimzzz 


Make it Glow Contest

Does anyone know what happened to the Make it Glow contest (ended 12/31)?  I can't find it anywhere on the site through general navigation (recently closed contests).  It was sponsored by Radio Shack and I now see in the Contest FAQ that "We recently discontinued our sponsor/prize provider program for sponsor contests."  Did the plug get pulled on this contest? Thank you!

Topic by skibum30   |  last reply


Some feature suggestions for the site...

1) Add a short list of the last 5-10 most recent forum responses, possibly in the right column. Sort of a "what's hot" list. So you don't need to hit "view all" to get a quick snap-shot of activity.... 2) Add a "sticky" to the top of the FAQS section with a link to some of the "helper" projects, like Eric's "How to make a great Instructable," etc.

Topic by gmoon   |  last reply


Can't find info on revenue sharing on instructables

Surely there is some information on how instructables pays all its contributors/writers/photographers/videographers for making the site what it is? How to find the reference on how they could even pay a pittance to users thru paypal? Maybe there is a section in the FAQ that helps us contributers make money else where. I can't find it. don't call me shirley

Topic by wallm   |  last reply


Bug in text-to-HTML converter, regarding hyperlinks

In a posting to NachoMahma's Text-Formatting FAQ, I remarked on a bug in the way hyperlinks (bracketed text) are rendered. The bug involves enclosing a hyperlink (valid or not) between punctuation characters, for example "[a-quoted-link]" or ([parenthetical-link]): "[a-quoted-link]" ([parenthetical-link])In both cases, the leading punctuation character, adjacent to the left bracket, is moved to the end of the link, instead of being preserved at the beginning.

Topic by kelseymh   |  last reply


I can't change my settings.

I seem to be unable to change any of my settings. Either the page shows an error or nothing happens when I click to update. I have done all of the normal stuff like delete cookies and temp internet files. I still can't change anything. In the FAQ section there seems to be others having the same problem, but I am not seeing any fixes. Anybody have any ideas?

Topic by Killer~SafeCracker   |  last reply


Max Contest Entries

There has been some question about the max number of contest entries allowed in the contest FAQ forum. There are few ibles that have won a Halloween contest and then are entered in more contests that equal more than 3 total contests. Until now, it seemed that Halloween  was the exception to the rule. However, with this example, it seems that there is a bug in the contest entry system. This ible has won a contest and is entered in 4 more. https://www.instructables.com/id/Make-a-3D-model-from-pictures/

Topic by Brooklyntonia   |  last reply


Giant Plastic Lung...

I have made a giant lung out of polythene plastic and I want it to inflate and deflate by itself, on a loop, inside a small room. How do I make this happen? I have access to power sources, plugs etc. I don't have a lot of money I am looking at breathing, it is there but doesn’t have a form. I am making breath something that can be caught by making a lung that I have built out of plastic.

Question by reckoner-rat   |  last reply


What's the best way to organize your photo library?

I've only posted 2 instructables but have over a hundred photos. Is there a way to make folders in my library? I saw the FAQ on Tags but I'd rather not have to scroll through many sections to get to the ones I need. Also... If you clean out your library, will it delete images from your instructables? (Are the images from your instructables always referanced back to your library?) Thanks! Mikey

Topic by Mikey D   |  last reply


Superstruct is here!

From the Superstruct FAQ: Superstruct is the world's first massively multiplayer forecasting game. By playing the game, you'll help us chronicle the world of 2019--and imagine how we might solve the problems we'll face. Because this is about more than just envisioning the future. It's about making the future, inventing new ways to organize the human race and augment our collective human potential.Seems rather interesting to me.Link

Topic by puffyfluff   |  last reply


Hey, where did the latest Site Update posting disappear to?

Last night, Rachel rolled out some updates and bug fixes, and very nicely posted a summary to Site Updates (thank you, again!). That posting seems to have disappeared from the forum, but not from the top-level count for the forum. Update:  It seems to have been moved from the Site Updates forum to FAQs.  It is still read-only, so I don't quite understand why that was done.

Topic by kelseymh   |  last reply


Removing Gorilla Glue From Skin Answered

   Has anyone found a way of removing the brown 'Original' Gorilla Glue from skin.  Earlier today I picked something up by the wrong side which I'd just coated in the stuff.  I've just spent 20 minutes washing and scrubbing my hands as per their FAQs and have just about lost the stuff, but has anyone come up with a miracle way of removing it? Note that this is the brown foaming polyurethane glue; not the cyanoacrylate type.

Question by AndyGadget   |  last reply


How do you install a bicycle generator to your wheel to power monkeylectric bike lights?

On Monkeylectric website under (FAQ) said the monkeylectric lights can be powered from the energy of the spinning wheel by using a bicycle Hub-integrated generator.  How do you install a Huh-integrated generator to your bicycle to power the monkeylectric lights and what parts do you need?  Also is a Hub-integrated generator the same as a Hub-generator?

Question by John Naglosky IV   |  last reply