I have a ruined sweater that I'm hoping to felt, but the blend is 60% cotton, 25% angora, 15% nylon. I feel like I've heard that a sweater has to be at least 80% wool to felt.
Question by obsessed | last reply
Felting, Sewing, Re-use, Re-purpose
Question by maryelen | last reply
I have some stained sweaters, i.e. cannot be worn, which I'd like to felt for craft projects, but I'm not sure what will felt successfully. That is does it have to be 100% wool? If not what is the minimum amount of wool it has to contain to be felt-able? Thank you for your help.
Question by buddydog71 | last reply
I have an item that is crocheted. I'd like too give it the felting look. What exactly is felting? How do you felt? Can felting be done outside of the washing machine? How is felting done in the washing machine? Anyone have any idea's? Thanks
Question by lawdog323 | last reply
Where is the pattern for the pink lady bag?? Sorry, I know it must be obvious to 1000,s but me!?
I do a lot of needlecrafts so I have yarn scraps of all descriptions & I would like to use them in some productive way. I want to use them to wet felt into something that I could then make into a pillow or whatever. Theoretically, it should work. If anyone has any ideas or comments please let me know. thanks
Question by teaellen 2003 | last reply
Question by serenajve | last reply
Scope this post at CRAFT to learn how to upcycle your old wool sweaters into felt! Brookelyn compares and contrasts the techniques and benefits of hand-fulling vs. machine-fulling, and shows us samples of the results. Fulling is the process of turning knitted or crocheted wool into felt. So check it out, and start upcycling those old wool sweaters into new Instructables!
Topic by scoochmaroo | last reply
A variety of iconic items from the past are turned into lovely felted and embroidered items by blublythemonster on Flickr. There's some amazing work here and I'd love to see them all in person. Just so that I could briefly touch them to make sure they're real. Flickr setvia bbgadgets
Topic by fungus amungus | last reply
The folks over at Martha Stewart's craft department make a lot of things out of felt and thus have a lot of felt scraps left over. Kristin St. Clair had some free time and started a small project with the felt that turned into this crazy rug. To make it yourself, cut up a ton of felt strips and start rolling them up, using fabric glue to keep it all together. Repeat, repeat, repeat, and add some other shapes along the way to keep it interesting. I just FELT like crafting! via CRAFT
Topic by fungus amungus | last reply
Question by pxrising | last reply
a)not a bag or purse, b) that is actually useful and c) a worthy present for a friend or partner?!!?
Question | last reply
Seaking to use carbon fiber felt to blanket/insulate against process heat loss to enviroment. can work with single pieces as small as 3 inches by 12 inches, aprox. thickness 3/8ths inch --HOPEING FOR cheap!
Question by big al 1048
Hey, i was wondering if there was any cheap method of making carbon paper or carbon felt at home for use as electrodes.
Question by LiquidLightning | last reply
I need to cover a 6" styrofoam ball with a piece of felt 8" X 11". How do I cut the felt; what glue do I use to glue it on?
Question by whstefl | last reply
When felting a wool sweater using hot cycle washing machine method, is it absolutely necessary to dry the item in a dryer afterwards? also, should i cut seams off before or after felting the fabric?
Question by cherishedpotato | last reply
Question by WerdnaN | last reply
We have sheep and are near Chi-town if any one can answer me id be very greatful
Question by Mirime | last reply
Seeking a source for remnants carbon fiber felt, will use as combination wind screen chimney internal liner to prevent loss of heat to the environment can use piece sized 4 x 24 inches-minimum. thickness 5 mm, 7mm or better if possible. carbon fiber is usually sold by the sq. yd./meter- i know that carbon fiber felt exists but can't seem to locate same, free or cheap is best, thats why i'm looking for remnant material. thanking you for your help big al
Topic by big al 1048 | last reply
My instructions are sketchy. Can I use any non-wool thread?Should I baste the kniited material to the stuffing inside or do I need to go through the legs, arms, hedd,etc? This is my first felting project. I appreciate any suggestions? Thanks?
This is too awesome. These feltidermy pieces are felt versions of the classic head-stuck-on-a-chunk-of-wood taxidermy thing. Be sure to check out the full Flickr set for a lot more examples. Feltidermy Flickr set via neatorama
Topic by fungus amungus | last reply
- searching for carbon Fiver felt to use as a blanket/insulation around top half of the burner units of JetBoils, Bushbuddies, or any wood gas burner- D.I.Y. or otherwise. Use of carbon fiber felt at burner will greatly reduce heat loss to the environment, providing more heat to the pot or billy can being heated. Here, space must be allowed for additional air entraining to provide combustion air for complete burning of gases--proper shape of openings below burner top plate will allow for a soft shelled wind screen which will morph into a chimney-like structure surrounding pot or can which sits unmodified on top of Jet Boil, Bushbuddy, wood gas burner or hobo stove Note that a close fit to within as close as 1/4 will increase speed of gases/heat past pot scrubbing off heat to the pot being heated, possibly creating need to raise the height of the chimney I am using this site in hopes of some one who can find me Carbon Fiber "FELT", I am also open to any conversation on this concept / design.
Question by big al 1048 | last reply
At around midnight: my wife freaked out, but it was hardly worth being frightened about. It felt like an overloaded tractor trailer barreling down the road. Just a little vibration. I am posting this, mostly for any that felt it in my area and wanted confirmation that this actually was what happened ...The local news was right on it....Some info here
Topic by Goodhart | last reply
Hi everyone.I need a one side adhesive, velcro-receptive tape.That is, an adhesive tape that is sticky on one side and on the other it has a felt-like tissue.English is not my first language and I am not sure about what to search for on eBay or Aliexpress to buy.I need this for my project but all the tapes I could find have both sides (both hook and loop) and they are much costlier than what I'd expect just for a felt-like one-side adhesive tapes.Can you help me please?Thank you,Atkers
Question by atkers | last reply
I knit a cloche for my sister out of Icelandic wool and felted it and it came out too small. So I reknit it with the same damn yarn, though a bit bigger, but this one won't shrink even the tiniest bit. I've washed it (front loader, dried it in the dryer, and now I've been boiling it for 20 minutes. It's getting furry, but the stitch definition and the size are basically the same.
Question by bearaase | last reply
The last Lego forum thread I started went down a storm so when I saw this Lego printer online at BoingBoing today I HAD to post it too. YouTube user Horseattack posted this video a few days ago of a printer that he made using Lego to move a felt tip pen across the page. He doesn't give much detail about how it was made or any instructions on how to do it, but the video is pure awesome. Here's what he had to say about it in the video description: "Lego felt tip 110" printer connected to an Apple Mac. This is not a kit you can buy and does not use mindstorms. I designed/built/coded it all from scratch including analog motor electronics, sensors and printer driver, the USB interface uses a "wiring" board.
Topic by Jayefuu | last reply
I use a Dremel-clone, and it has two kind of polishers; the white felt ones and this two other type: Looks like hard rubber, and I used it to burnish steel to clean some grinding marks. It works, but I'm not sure: 1 - Must I use the polishing powder like with the felt ones? 2 - Why they have two colors, green and blue? Have they different hardness? Thanks for your time!
Question by infob | last reply
If you're looking at that new Fiber Arts Contest and just can't figure out what the heck it's supposed to mean, you're not alone. Traditionally we've run knitting contests on Instructables. I love our knitting contests, but I know our community is capable of doing so much more with yarn and other fibers that I wanted to open it up to all sorts of skills. The contest page describes acceptable entries as involving "Spinning, Weaving, Felting, Knitting, Crocheting, and Tatting," but I also encourage entries for tools and tips that accompany these crafts. You might notice it does not mention sewing. This is not a sewing contest. Let me repeat that: This is not a Sewing Contest We will be launching a sewing contest next week, so fret not! So my takeaway from this is to stop with the confusing contest titles, but "The Spinning, Weaving, Felting, Knitting, Crocheting, Tatting Contest" just wouldn't fit on the thumbnail!
Topic by scoochmaroo | last reply
Hi, I'm looking for some suggestions of what I'll call (out of ignorance) "semi-adhesive materials". I am looking for a large sheet that can be folded, or preferably tightly rolled (think a window blind) and a variety of shapes that can be stuck on and repositioned. I've had a look at display felt for use with hook and loop stickers. The felt is quite thick and expensive. I'm just wondering if anyone else has experimented with this kind of project. Flexible magnetic material, or some kind of static attraction or something? Cheaper the better really, but durability is a big concern too. Any pointers in directions to look would be greatly appreciated.
Topic by shockerty | last reply
I have an old garbage bass to practice on and felt this might be a useful skill, and was wondering where to get this info.
Question by spotaflint33 | last reply
I have seen huge foam cowboy hats and want ot make the same kind of thing but from a different material.
Question by landmanhall | last reply
I have to admit that I was skeptical before starting my Residency at Instructables. I never felt comfortable calling myself a "Maker" and here I was, walking into the belly of the beast at Pier 9. I felt like the term "Maker" was starting to read as cold, technical, robotic and...frankly...stuff really geared towards young boys. I felt as though I was coming into the program as a spy, an outsider looking to infiltrate and be critical of the hype around 3D printing. My project was really my attempt to talk openly about how I felt about these things in a way that people who design and use these machines might take notice. I was expecting to walk into an office full of dudes that wanted to make crazy things just because they could but I was created by quite another experience. The other AiRs were all interesting, questioning, infiltrating. The entire company was full of creative, open-minded, artsty folk and I can't tell you how good it felt to be in the electronics lab one day with all these different amazing and creative women coming in and out. I end my residency (the full-time part anyway) with a different attitude and the realization that people are pretty open-minded, excited and down-right nice! I never imagined people would go to the lengths they did just to help see the project along and it felt great to help and encourage others to see their ideas though. I think I leave the summer with a few new friends. On my presentation day, I felt like I wanted people to sign my year-book - it's that kind of place. My favorite thing about the residency was also made the residency difficult. The space and people are so interesting and engaging that conversations start all the time. It's so great, but also makes it really hard to get work done! There is so much going on that its hard to stay on top of what people are working on - especially with the residents that aren't around everyday. It would be interesting to find ways to facilitate feedback and collaboration in different ways. We do an exercise in a class I help with at Berkeley where people put their projects on the wall and the other students add post-its with feedback. Maybe if we had a wall like that in the Air-ea it could be a way to keep tabs of all the work and also give short snippets of feedback without interrupting someone's flow. It wouldn't be a way to replace other ways of sharing what we're working on, but a sounding board for just quick, "have you seen X" kind of ideas. I can't say thank you enough. I had a great, productive summer and I'm excited to be sticking around for a bit longer and seeing the new AiRs that come in and out. I would (and have) recommend the program to anyone - it was a really wonderful experience!
Topic by ldevendorf | last reply
OMG! there was an eartquake! did you guys who live in the places mentioned above feel it? i felt tiny tremors, i live in central new york.
Question by Acepilot42 | last reply
I know that a lot of slingshots use a leather strip, but that's not available for me, so i was wondering if i could use anything else like felt, cardboard, etc.
Question by rogerrabbit321 | last reply