flame

What is flame? Is it gas ,solid or liquid?it can't be solid or liquid but it isn't realy gas eather... or is it?

Topic by toogood   |  last reply


Laptop Flames

I got me a new laptop, and it looks pretty boring. So I drew flames on either side of the keypad on the empty spaces. However, it doesn't seem to be permanent. When I keep my palm or finger on it for a long time, the color fades away. Any help on how to get it to be permanent?

Topic by (s)Aint   |  last reply


flame thrower

A really cool flame thrower. It only takes a lighter, a stick, and a can of wd-40.

Topic by bop96   |  last reply


flame thrower

Ive seen this guy with a knex flame thower, then 2 months later the genius built a lego flame thrower.what do you think? can you build it? if so please post it. sorry i couldn't you the vids, cameras bit went funny mind you nothing melted for fve mins on going pumping. know it uses a piston sorta thing in both. squirting oil, a wick at the ignites it out come fire. something an acnient chinese flame thrower.

Topic by rde   |  last reply


Flaming Elmo

I came across this a few hours ago.. made my day completely

Topic by bumpus   |  last reply


flame igniter

Joho! i am making something similar to the "fireslinger" made by tetranite. The big difference is that mine w ill use short jolts of gasoline, that come from a perfume tester, so there will be short big flames, but i need something to ignite the small cloud of gasoline. the problem is, that it cant be a flame, or a torch, because it will be mounted on the wrist. so i will need a reliable ignition source, like a electric shock, the only problem with electricity i use, is that the sparks are too small to ignite everything, so i need bigger sparks, made by anything that will easily spark!

Topic by pluish   |  last reply


Flame Message

Hey everyone, this is my first post and i was wondering how i would spell out a message on the ground in flames for a special occasion. I saw this sort of thing in the movie Daredevil, i think... where the police officer threw a lit cigarette on the ground and it ignited "DAREDEVIL" in flames on the ground... i noticed it burned for a while as i was watching the movie, and i talked with some other people about it and they suggested it could be some sort of gel... any ideas?

Topic by pianofreq   |  last reply


Flame-Throwing Wheelchair

With 15-foot flames and a top speed of 20 mph, this is a pretty serious piece of mobility assistance. OK, sure, it's a ridiculous device, but look at the flames! Link

Topic by fungus amungus   |  last reply


Flame-throwing scooter

Gotta love this so-not-street-legal mod to a scooter that shoots 15-foot flames out the back. Just a push of the button and WHOOSH! The creator, Colin Furze, can even change the angle if he wanted to. Aside from being illegal to use the biggest downside is that the flames can come back at him if he isn't careful. Wheels on fire! James Bond fan invents flame-throwing scooter via geekologie

Topic by fungus amungus   |  last reply


Propane flame thrower

    Please read full post before making any comments. First of all yes, I know real flame throwers use napalm and compressed air to operate, but I don't want any crazy range and lethal power. I don't intend on using this thing in combat. I'm thinking something with a 4-5 foot flame, more if possible, (I don't think it would be with propane, but please, correct me if I'm wrong). I don't want a jet flame so I'm assuming I'll need to lower the pressure to get a more "violent" looking flame with the desired ranged. A "gas pump handle" for the flame control (sorry I don't know the proper term for that type of mechanism. it's not really a trigger. A lever valve?), or I might use a solenoid, not sure yet, Whatever would be more effective. Again, please give me any input your may have. The fuel source would be a large propane tank that I will have strapped to my back, I already have a design for that. If that seems too extreme I might do what this guy did and use a small tank with a reservoir, but with two tanks for more fuel. ( https://www.youtube.com/watch?v=ypIGeNdJbJ4 )  I'm undecided on whether I want electric ignition if anyone could give advice on that as well it would be appreciated. Anyone who has made something like this or knows what they are talking about please give me your input. Yes, I know this is a dangerous project and I take full responsibility should anything go wrong.    This is a video showing the flamethrower that in the above video being used. It displays the kind of performance I am looking for, except I don't want it strapped to my wrists. https://www.youtube.com/watch?v=D5_ogU4Jzt4

Topic by shark4t   |  last reply


I have a Piaggio Nrg 2003 EXHAUST FLAMES

I have a Piaggio Nrg 2003 been in the garage for a while now trying to get it back on the road for my son . When trying to start it turning over got good spark sometimes you get a blow backs though the Exhaust and also flames coming out . Could somebody please help!!

Question by southern1316 


bond of flames keyblade (for ojochris)

Well dsman1! you said you wanted a bond of flames you got a very good looking and kind sturdy bond of flames tell me what you think.

Topic by combatknex   |  last reply


wrist mounted flame cannons

Should i post an instructable for this?

Topic by budsiskos   |  last reply


Flame broiler Magic sauce

I go to a place in Southern California called flame broiler,they have the best teriyaki sauce(they call it magic sauce).Im very picky when it comes teriyaki sauce,i dont like the alcohol in it and it needs to be sweet and viscous like maple syrup.Im trying to make a copycat recipe of the magic sauce if any one can help.

Topic by cyzco   |  last reply


Super soaker flame thrower

I know that if u put gasoline or alcohal in a super soaker, and attach a lighter to the front u can use it as a flame thrower, i heard u need a metal nosel throughDose any one have any pics or any thing of how do do this? PLEASE USE CAUTION WHEN PLAYING WITH FIRE THIS CAN EASLY CASUE DEATH TO USER

Topic by i make shooting things   |  last reply


What are all the flaming-hoops?

Say if I was to sell electronic objects invented by me or friends, that may or may to be functional or may or may not be artistic what are the laws/certification/inspections/flaming-hoops that I would have to clear first and what is that entire process like? Does anyone know? The FCC is one of them, and it pertains to whether your object will make planes fall out of the sky or turn off pacemakers dues to magnetic waves or unauthorized frequencies, correct? Who ensures that the objects won't catch on fire or melt into a caustic China Crisis goo? How you convince them of this? Who else do you want or need a rubber stamp from before you can sell your radio wave emitting blinky bug at the garage sale? Or your robo-fridge ("Is your fridge running? Better go catch it!") in your Etsy shop? What if it had a sim card? Any illumination on this would be invaluable!

Topic by watchingmachine   |  last reply


knex ironman mag help?

So im working on a new gun and want to use somesort of ironman mags. but instead of the large fairly bulky mag i redesignd the mechanism. so it would be slimmer offering a smaller overall gun but i cant find a way to get ironman mags to work with a yellowcon-greenrod-yellowcon. with the typical bendy rod method any ideas of what i can do?or is this just a forlorn hope. also i should be done by this friday.pics will be up late friday or mid saturday.:)

Question by tubanator-2.0   |  last reply


Is lighter flame/smoke/fume toxic?

I was going to make an instructable on mini roasting when something hit me. When you use the lighter to light maybe a marshmellow, is the fire or smoke or fumes from the fire toxic? I mean the gas/alcohol gets neutrilized when it burns up and turns into flame but If i cook with it, it may be a different question. If someone asks me to think about smokes, the I should say to you that smokes are already toxic and anyone smoking shouldn't care. ( I don't smoke, I want to live) If possible you can answer this question and have credit in my next instructable.

Question by knex_mepalm   |  last reply


What can i make with chicken?

Chicken Salad! Yes! was a thought...

Question by Yerboogieman   |  last reply




How could I make an exhaust flame kit.

One like this only a lot cheaper haha

Question by Jor2daje   |  last reply



Dutch Robot "Flame" Walks Like a Human

Via PhysorgThis robot uses the same way humans walk, but actually falling forward. "PhD student Daan Hobbelen has demonstrated for the first time that a robot can be both energy-efficient and highly stable. His breakthrough came in inventing a suitable method for measuring the stability of the way people walk for the first time. This is remarkable, as ‘falling forward’ is traditionally viewed as an unstable movement.To watch Flame in action click here (WMV, 5.25MB).Next he built a new robot with which he was able to demonstrate the improved performance: Flame. Flame contains seven motors, an organ of balance and various algorithms which ensure its high level of stability."Robots that can chase us flesh-bags down to power themselves are now one step (pardon the pun) closer. w00t!

Topic by laminterious   |  last reply


Lawn Torch with Big Flame That Lasts Awhile

I want to make a big torch that lasts a long time and is inexpensive. Does anybody have any ideas? I was thinking that I could use a coffee can for a container for the fuel and a big piece of cotton for the wick. I saw a pretty neat torch on this website but I don't think that it would last for hours.

Topic by sundet   |  last reply


Help with solar "flame" for dragon yard art

Synopsis:  I'm a novice here.  I'm trying to make a small electric tea light candle work from a solar landscape light to put a "flame" into a crappy 12" metal dragon sculpture for some yard art. My quandary:  The solar light only runs off of one AA battery (1.2 - 1.5v).  It appears to be using a 0116 IC? (I know nothing about these) to act as the Joule Thief to power the white LED that I assume is running around 3v.  The tea light uses 4.5v (3 x 1.5v) and has a 47 Ohm resistor, a capacitor, and a chip to control the "flicker" of the light. The Help:  Can anyone offer up some suggestions how I can properly get the flickering tea light to run from the 1AA  solar unit?  Could I do something like: 1. Remove white LED from solar light and check voltage 2. Replace resistor on tea light to accommodate voltage coming from Solar battery 3. Solder new wire from where the old white LED was on the solar light to the power leads on the tea light. Thanks for any thoughts, support, or reference.

Topic by csbeltram   |  last reply


What is the best way to have a clean looking flame thrower on the back of my bike?

My bike is a standard mountain bike and I wanted to give it a more custom look than my paint job. I thought the best way to do this is to add a flamethrower to match my custom paint job which will be a red pinstripe around the flame, when the flame itself is grey. The flames will have skulls airbrushed in it. The rest of the body will be black with a little red pinstriping action. Maybe even some lettering reading : "Beast". probally with the same skull and red paint scheme. I want the flamethrower to fit in with everything else well, but I don't want to change the frame much, or paint the flamethrower.

Question by matt17fan   |  last reply


copper wire vaporization with a candle ?

Hi !This morning, I was wondering what was the maximum temperature of the flame of a simple candle.So, this evening, despite the answer is on the internet, I made some quick and various experimentations of my own, mainly because there was nothing interesting at TV ...I put a wire of tin with a diameter of 1 millimetre over the flame and it liquefied immediately. So I immediately deduced the temperature of the flame was over 505oK ...Then, I tried with a wire of iron with a diameter of 1 millimetre, and it did not liquefied. So, I deduced the maximum temperature of the candle's flame was below 1811oK.Then, I tried with a very thin wire of enameled copper (thiner than a hair), the enamel vaporized in a flash and the copper wire quickly liquefied. I deduced the max temp of the flame was over 1357oK.This gave me a maximal temperature somewhere between 1357oK and 1811oK.Then, I tried with a thin wire of copper (0.2 millimitres), and it liquefied. But I also noticed that, sometimes, there was a green flame adding to the candle's flame.On the internet, they say that coppers flame are green. This would mean that my candle's flame is hot enough to vaporize my copper wire ? and, thus, that the maximal temperature of the candle flame is over 2835oK ?????If so, why can't it liquefy my 1 millimeters iron wire ?=o/

Topic by chooseausername   |  last reply



pocket size camp stove by javin007?

I made a stove just as discribed but my flames died down to about one half of an inch after the primer flame went out now i didnt have it in the wind shield containes but i was indoors does the wind shield hold heat to keep the flames larger the demo i seen on yuotube the flames were much larger thanks

Question by Gizmobuilt56 


is wax a good fuel???[in vapour state]?

 i burnt wax by keeping it on a spoon on a flame.... after some time it caught fire. then when i turned th spoon upside down large flames were there as if flame shower. so is it a good fuel?  

Question by    |  last reply


im looking for cool tricks i like the flaming ball on hands and stuff like flames on youre fingertips,get out handcuffs

I like playing with fire its awesome and handy tricks like bar tricks but i want to know more

Question by noeyebrows1997   |  last reply


Mercenaries 1: Playground of Destruction, or Mercenaries 2: World in Flames?

I have a PS3, and I really want to get a Mercenaries game, but I don't know which one to get. Basically, I want to know which game is better, and what makes it better, and which one has a Lamborghini (because that will play a huge part in my decision).

Question by J Moneyman   |  last reply


Does Prince of Persia: The Shadow and the Flame work on an iPod 3rd generation? Answered

I looked at the page and its says it only works with 4th gen and above, but usually thats just for precaution.  Does anyone with the 3rd generation of iPod touch have this game, and if so, does it work???

Question by builderkidj   |  last reply


What is better? the Gamo blue flame or red fire?

Yes I know the blue flame is a lot lighter, but I want to know what other users think would be better out of a 600 fps break barrel against squirrels.

Question by DELETED_tetra28 


i am making an airsoft flame thrower from halo3 should i try to get a patent?

This is going to be full size should i make a patent

Question by thecrow117   |  last reply


Does anyone know how to create a fairly realistic flame effect on a dress using fabric?

Hi everyone! :-) I want to go to a fancy dress party as a Fire Goddess, but I'm a little stuck on finding the best way to make a fairly realistic flame effect for my dress. I was thinking of starting with a black sheer mini-dress, then sewing various shades of two-tone organza on in small strips to look like dancing flames, to create a kind of 'flame vortex' effect. I know that's a really bad description, but hopefully this little picture I found might give you a better idea of what I mean: http://2.bp.blogspot.com/_INmNOB9JiHw/SgMoA0oxU8I/AAAAAAAAAOY/PSNiC473-WQ/s1600-h/flame-dress-sketch-lo.jpg I have no idea whether there is a better way to do this, so any suggestions or ideas would be very welcome. :-) Thanks!

Question by MissPennyFarthing   |  last reply


when making some sort of "flame thrower" using an aerosol and lighting it, is there really such thing as suck back?

I dont see how flame would go through such a small opening, have air to fuel itself, build up pressure, and make it thick metl can explode. Even if it is possible itdoesnt seem easy. Cause axe cans and bugspray has some thick metal. Please respond

Question by jamob   |  last reply


What do i add to my alcohol fuel for my flamethrower, to make the flames brighter? Answered

Hi Im working on a flamethrower which is turning out pretty well, the only issue is, since im using alcohol as the fuel, the flames are pretty much invisible, i was wondering what i could add to increase the carbon content. Normally ide experiment with adding a little gasoline, or diesel to it, but i have to be careful with my pump, its made from either ABS or PLA, and for some reason everyone on ebay who sells them are very sketchy, ive bought 4 in the past and only the last one ever arrived. Anyway, what can i add to my fuel to make its flame more visible? Fortunately my flamethrower does not leak at all so its safe to move up from alcohol to something with a higher burning temp. What can i add that will not dissolve the plastic, increase flame brightness, and not increase the burn temp too much. Before hydrocarbons, are there any salts or chemicals i can dissolve into the alcohol to do this? i beleive i can dilute the alcohol a bit with water so it will take sodium, but will that have any significant effect? The sun is pretty bright here so alcohol flames are invisible, gasoline flames however are very visible in contrast. Thanks

Question by oldmanbeefjerky   |  last reply


Robot

Hey, im wondering would anybody be able to make a tutorial on making a flame throwing robot with mindstorm.. as in with a can of lynx attached that the robot can press and spray onto a flame that is also on the robot? and i would also like the robot to be able to move.. would anybody be able to do this for me?

Topic by Corp95   |  last reply


Nerf Gun into Flamethrower??????

Anyone have an idea on how to turn a nerf gun,(any type) into a flamethrower? I've been searching for maybe modified bullets, with just a small flame source...... Comment if you have any help please.

Topic by whiskrs   |  last reply


Alcohol stove flames are 2 feet tall any ideas?

I built a pressurized jet alcohol stove and when I light it with no pot stand or windscreen, the jet flames are 2" tall. I add a windscreen and pot and soon I have a 2 foot tall blaze.  I tried taking off the wind screen and I still get tall flames. I am using red HEET, but I am not sure that the fuel makes a big difference. I hypothesize that the reflective heat from the windscreen and pot are making the stove heat up and vaporize the alcohol faster. I tried putting holes in the wind screen and I still get big flames! I want a safe backpacking stove and I'm sure others have had this problem-- any thoughts on why it is so dangerous?

Question by 3leftturns   |  last reply


Building material that dissolves in water and same time flame retardant?

Hello everyone! I have a problem that I've been working on for a while.  I need to instal a mobile unit in the sprinklered mall. The Fire Marshall told us that the mobile unit has to be installed with sprinklers or with a ceiling that dissolves in the water AND flame retardant in the same time. Installing sprinklers is not an option. Also, the ceiling has to be about 8x20. I need to know if it's possible and if yes, what materials would work?  I would really appreciate any help! And If it's possible even only in theory, please let me know. 

Question by oafanasiev   |  last reply


Experiment on whether and when a stuck up fan will break into flame.

Let us consider a typical home electric fan, and we put some obstacle to prevent the fan propeller from turning, then we switch on the fan on the fastest speed; will the fan and when eventually break into flame because the propeller cannot rotate? Have there been experiments to see what will happen? Marius de Jess

Question by Marius de Jess   |  last reply


Will hot ethanol eat through flame hardened PVA glue?

I'm still working on this solar thing and it's coming along pretty well, am starting in on the final piecing of things together. One old problem that has resurfaced tho is the sealing of the boiler. I was using a metal epoxy similar to Quicksteel, which handled the ethanol ok but is going soft and cracking off, I think due to the regular heating > 80C. So I'm once again looking around for other options. What I'm trying now is wood glue, which I assume is just PVA, run over a flame so that it becomes hard. It seals the ends of the flattened copper pipe well, and doesn't immediately fail on contact with ethanol. Is it likely to hold up, do you think? I'm kind of assuming it won't, but it'd be great if it did. cheers Daniel.

Topic by SolarFlower_org   |  last reply


does anyone know how to fix a jet lighter?

In the tube/opening where the flame comes there is a very thin wire going across the middle of the opening. do you know if that is important and if so how do i fix it if it is broken?

Question by Kallen Maurer   |  last reply


How to make homemade campfire colors?

Such as blue, green purple etc flames.

Question by MNSnowbird   |  last reply


How to make a fire come from your fingertips...

Well, hello there, I'm trying to figure out how to use some small flexible gas tubing of some kind and a sparker to make a project that will make it look like a flame is shooting out of each finger and thumb. I'm also trying to figure out a way to control the sparker and the highth of each flame without using my hands as they'll have flames shooting from my fingertips. So any thoughts? Thanks, Daemon Ulf

Topic by daemon ulf   |  last reply


Change a Plug-in device into a Battery-operated device?

QUESTIONS - Is there an instructable on how to change a plug-in device (like one you plug into an outlet) into a battery operated device? - Is there even a way to do this? NOTE: may take a while for me to respond to replies, so please be patient...Thanks a-lot

Question by Lord Of Flames   |  last reply


Can anyone please help me buy telling me how to build a smaller version of the flame slinger??

Flame slinger Im trying to devolope a smaller version of the flame slinger someone please email me instructions or any ideas they might have on how to make a smaller version with a better and smaller fuel injection system and the lighting mechanism would most preferably be a lighter. This way its small and compact i have seen a video of one and would like to build one please email me if you have any information thank you.

Question by    |  last reply