Has anyone uploaded or found any Manga or Anime Instructables?

I have been searching instructables but i cant find any that relate to manga or anime other then "how to draw" instructables. I am looking for costume and weapon ideas as well as general conversations/forums involving anime/manga such as Bleach, Fullmetal Alchemist, Pokemon and Dragon Ball. I know there are a couple on Naruto, but I have not yet seen the anime or read the manga so i dont really care about that. Please post a link or just an idea for costumes, props or weapon instructables. Thanks and I hope that if you havnt read manga or watched anime before, you should get into it.

Question by Splicer02   |  last reply


Can someone suggest any costume pieces that could be integrated into casual clothing?

I was surfing some instructables and came across one for Sonic's shoes. This got me thinking: what if there were parts of characters from games, stories or movies that could be added to t-shirts, hats, pants, shoes, accessories, etc. I have always been a huge fan of dressing up, but have done it less and less so that i don't seem look to crazy or childish (even though thats how I act most of the time anyway :P). Franchises that i like are Halo, Bioshock, Fullmetal Alchemist, Bleach, Pokemon, Death Note, Star Wars, Gears of War, Lord of the Rings, etc. I am heavily into Fantasy and First-Person Shooters. I was thinking that objects such as a drill bracelet (bioshock), COG necklace (Gears of War)  or Ash Ketchum hat (Pokemon) could be subtly incorporated into my attire that could go a long way to expressing myself and my interests. Any links to instructables, websites or just general ideas will be appreciated. 

Question by Splicer02   |  last reply


Update on the layered metal weapons/props

Hello to everyone who took the time to read this update/list. So I have not forgotten about my promise to upload the Solidworks files and cutting plans. However that will be taking a backseat to finals until summer break. I will however go ahead and list off the items finished, in progress, on hold, or currently only in Solidworks form. Finished -6in Axe: 3lb head on an oak clad 1/4in steel flat bar about 20in long total -3in Tomahawk/Axe: 1.25lb head on a para cord wrapped 1/4in steel flat bar about 20in long total -27in BoneSplitter: 3.2lb aluminium reinforced steel construction. -18in BoneCracker: 2lb aluminium reinforced steel construction. -18in All steel BoneCracker: 3.5lb steel reinforced steel construction. More square handle and better center of balance than previous version In progress -10in Bearded Axe: 3.25lb head. To be mounted on oak clad 1/4in steel flat bar handles 18in, and 30in long. -10in blade Pugio: Model made of mild steel for practice and training. Needs to have bevels, and fullers ground plus handle and guard mounted. -8in blade Pugio: Model made of mild steel for practice and training. Needs to have concave edges, bevels, and fullers ground plus and guard mounted. On hold -14in Blade tester: Simple test bed modeled after BoneSplitter to test viability of various band saw blades(Metal and Wood cutting) for use as cutting edge for mild steel blade carriers. On hold due to the band saw blades being too hard to drill through. Only existing as Solidworks files --27in Revised BoneSplitter: 4.5lb Aluminium reinforced steel construction. Better center of mass and more square handle than MY           previous version. --37in blade Bastard sword: Aluminium reinforced steel construction. Should be very close in terms of center of balance and stiffness when compared to its hardened steel companions.  --20in blade Stacked steel Gladius: Twin riveted steel support plates with detoothed metal cutting bands saw blade used for striking edges.  --blade Hispaniensis Gladius: Single piece of metal for the blade. --blade Cinquedea: Single piece of metal for blade. Multi fuller blade. --8in blade Pugio curved: Same as other 8in Pugio except for the convex curved dagger tip --14in blade Spear from Fullmetal Alchemist: May upload the variant of this in which the "wings" are separate pieces of metal. --3.25in square Warhammer: 8.5lb head Assembled from 13 1/4in steel plates pinned together. Front is covered in 3/8in spikes poking through a steel striking face to prevent separation of the plates. Back end is a 4in spike. --5.25 square Warhammer: 16.25lb head Assembled from 21 1/4in steel plates pinned together. Front is covered in 3/8in spikes poking through a steel striking face to prevent separation of the plates. Back end is a 4in spike. --Straight edged War Axe: 7lb head Inspired by Ironclad Industries' Riftclaw. Made from 7 1/4in steel plates pinned together. I am aware that the riveted and pinned construction of these items makes them inherently less durable and less corrosion resistant than single piece construction. However I am a college student who is working with mostly scraps and whatever has to be purchased. Since mild steel thick enough to carve the Warhammers or War Axe is not common scrap material around the college's machine shop the only way to economically create them is to use stacked plate construction. As for the BoneSplitter, BoneCracker, and Bastard sword the stacked plate construction is used to both reduce the weight of the item and stiffen it at the same time.  

Topic by tytiger33