Search for fusion in Topics

fission and fusion

Um any idays for a small power generator under this topic?

Topic by ElectricBlue123    |  last reply

is wiikey fusion legal? Answered

Is the wiikey fusion legal in the us? i'm going to make a portable gamecube, and i'm going to use that if it is legal. i realize that, even if it was legal, using it with games you don't legally own makes it illegal. I will only be using my games i physically own, legally bought. any info is appreciated. 

Question by Krayzi99    |  last reply

A hotbed of cold fusion

I'm a sucker for fringe science. What can I say?From the BBC News Service:The long-standing debate about cold fusion is receiving new impetus at the American Chemical Society's national meeting in the US this week.Cold fusion, first announced 20 years ago on Monday, was claimed to be a boundless source of clean energy by Martin Fleischmann and Stanley Pons.Attempts to replicate their experiments failed, but a number of researchers insist that cold fusion is possible.The meeting will see several approaches that claim to produce fusion power.See the full BBC article here

Topic by randofo    |  last reply

Cold fusion experiment

I have reproduced some experiments on Cold Fusion. not as a source of energy but how to blend a wire of iron from 2mm with less than 2 ampere or obtain gas fuel from the water and graphite (coh4) without using dozens of amps.Do you think may be is interesting to do an instructabels to the matter? are not my nventions!I have same video of this experiment on my youtube channe Almost all in Italian language.. but with a little explanation also in EnglishThe power supply that i use and the experiments can be dangerous.. I would not like someone to dye !

Topic by alessiof76    |  last reply

Fusion 360 Classes

RockIT CoLabs is hosting a a couple of inexpensive Fusion 360 classes.     July 16 - 3D Modeling Basics for Beginners - Sketches and Essential tools.   - $20 July 23- 3D Modeling Basics for Beginners - Using Sculpting Tools - $20 With 3D printing you can turn ideas into reality, but how do you make YOUR ideas into a printable design? Even with no previous experience, you can learn all the basics for modeling software in one day using Autodesk Fusion 360. Create a custom name tag keychain while gaining experience and confidence with using the most commonly used tools in the modeling environment and learn how to use a 3D printer to print your design. Kris Struble of Near Future Education Advocates is providing RockIT CoLabs students with an amazing low-cost educational opportunity for students to learn the software and skills to make your ideas a reality with 3D printing. This class is limited to only 10 students so Kris can provide each student with the attention they deserve. CLASS OUTLINE Introduction to 3D printers and how a file is printed using Host software Learn how to navigate around the Autodesk Fusion 360 modeling environment Step by Step walk through using the all the most used tools for 3D model creation Use those skills to create a custom name tag key chain Hands on experience printing your model REQUIREMENTS A laptop running Windows 7 or OSX10.7 or newer Operating System. Autodesk Fusion 360 software downloaded and installed, creating a free account with Autodesk A mouse with a scroll wheel ABOUT THE INSTRUCTOR Kris Struble is an education advocate who specializes in teaching CAD and 3D printing. He routinely teaches this craft to young students in various public schools, after-school programs and summer camps. Kris has an amazing ability to make CAD and 3D printing interested, fun and understandable to students of all ages. He is currently working on a bicycle powered hat knitting machine made nearly entirely with 3D printed parts.

Topic by doverby    |  last reply

how can i model a working timing belt in fusion 360?

I want to model a working timing belt to simulate to motion of gt2 belt in a corexy 3D printer in fusion 360 i guess the Fusion team is working on it but are there any good hack to do it for now ? should i model it like a chain with an extremely small links ? 

Question by D_P_R    |  last reply

Scientists plan to ignite tiny man-made star

From"While it has seemed an impossible goal for nearly 100 years, scientists now believe that they are on brink of cracking one of the biggest problems in physics by harnessing the power of nuclear fusion, the reaction that burns at the heart of the sun.In the spring, a team will begin attempts to ignite a tiny man-made star inside a laboratory and trigger a thermonuclear reaction.Its goal is to generate temperatures of more than 100 million degrees Celsius and pressures billions of times higher than those found anywhere else on earth, from a speck of fuel little bigger than a pinhead. If successful, the experiment will mark the first step towards building a practical nuclear fusion power station and a source of almost limitless energy. Full article.This is big medicine, because while we have (more or less) successfully harnessed the power in nuclear fission, we've yet to find a method of using nuclear fusion for power (outside of experimental/weaponry uses). It is important to note, however, that this initial experiment, while big, won't be powering your home or office just yet-even if it does work, there's still quite a lot that would have to be done to build a nuclear fusion power plant.Still, it's heady stuff, the energy source of dreams-a world powered by nuclear fusion fueled by hydrogen, one of the most abundant elements in the universe-only now that dream is looking like it could, possibly, maybe, eventually, become reality.And now, a word from our sponser resident particle physicist:The NIF at Livermore uses small (BB-sized) pellets of liquid hydrogen (technically a deuterium-tritium mixture) encased in a shell. The pellet is illuminated by a terawatt laser split into 192 sub-beams all focused on a poiint. The outer shell of the pellet is vaporized and a shockwave compresses the hydrogen to the point where it should start fusion.The whole process is over in roughly a microsecond. If you keep dropping pellets into the chamber, then you get a series of pulses, but as soon as you stop, everything shuts down.The NIF (like the NOVA laser before it) is being run at a weapons lab, because the kind of fusion it can do (individual microsecond pulses) is most useful for studying the physics underlying thermonuclear weapons. It is probably not a viable technology for continuous power-generation fusion, but it is necessary for understanding how to make that sort of system work.

Topic by Lithium Rain    |  last reply

Fusion 360 for 10.10 macs?

I'm trying to use Fusion 360 on a macbook running 10.10 Yosemite. I cannot upgrade OS and I cannot install Fusion 360. There is no web based options (Yes, Jon-A-Tron, I went to your link in previous posts... was only a file viewer). Any good alternatives or work arounds?

Question by craig.piscitello    |  last reply

Fusion 360 on Apple MacBook

Hello - I've recently been having troubles running Fusion 360 on my Windows 10.1 laptop. I've seen that most people use Apple MacBooks with Fusion 360 CAD software, and it runs quite fast and reliably too! So, I was wondering which MacBook would be the bet for this application? I am thinking about getting the new MacBook. Let me know what you think, and past experiences you have had. Thank, Dylan

Topic by DylanD581    |  last reply

Fusion 360 instructor wanted

Does anyone know where  I could find hands on instruction here in the San Francisco Bay Area?  I have tried posting in local media for a part time instructor but have had no luck. Thanks Wayne

Topic by WayneD59    |  last reply

Nuclear Reactors and Batteries

Hydrogen fusion is a promising source of energy. They have made fusion reactors already. Though they aren't going to supply our energy needs because they consume more energy than the make. Fission reactors have been already made and are good at making energy. Unfortunately they have dangerous radioactive byproducts and wastes. Please post anything you want as long as it has something to do with nuclear reactors.

Topic by Masterdude    |  last reply

Connect transformers together in series? Answered

I've got 4 neon sign transformers, each outputting 12 000V at 30mA. I want to connect them together in series to increase the voltage to 48kV but I just wanna check on the right way of connecting them for safety reasons. The input for all transformers is the standard 220V AC.( I need such a high voltage for a fusion reactor) (the pic is one I found on google that's why the input voltage is 120)

Question by JunaidA44    |  last reply

what should happen after fusion?

Ive been waiting for nintendo to get a game after fusion. Suggestions?

Topic by bassbot102  

The end of the energy crisis? This is the wikipedia page to a cold fusion (low temperature fusion) device that uses powdered nickel as fuel to produce free energy... It's supposed to be totally eco-friendly and it's planned to be sold out as commercial cold fusion device. Just thought to share this with others on Instructables. I like it and am looking forward to seeing this in my hands when it's made commercial. How about you?

Topic by ZokiS    |  last reply

Hot Couture: A Fusion of Fashion and Fire

The Crucible is having their annual Hot Couture: A Fusion of Fire & Fashion festival.It's a conflagration on the hottest catwalk in the Bay Area, with fabulous fashionistas, flaming dancers, stilters, contortionists and aerialists. Enjoy music, dazzling performances, fiery delicacies and refreshments, and a silent auction -- all while sizzling models strut down the hottest runway ever.What: Hot Couture A Fusion of Fashion and Fire When: Thursday, Friday & Saturday, January 17, 18, 19th 7:00 PM Who: Dozens of Bay Area's hottest designers, outrageous models and awe-inspiring performers Where: The Crucible 1260 Seventh Street, Oakland, CA 94607 2 blocks from W. Oakland BART Tickets on sale at Thursday 1/17 - Preview & community night: All tickets $15 Friday 1/18 - $35 General Admission, $30 Crucible Members, $40 at the door Saturday 1/19 - VIP gala $125 in advance, $100 Crucible Members, $150 at the door

Topic by noahw    |  last reply

How do Tokamaks work?

Ive been reading into the nuclear physics behind devices like tokamaks which are promising candidates for a viable fusion reactor. The thing is, from everything I've seen and read it looks like the popular model for a tokamak is only the in between stage. Its like describing the forces on an airplane in flight but neglecting to explain how it takes off or lands. Can anybody tell me how they get those things fired up and cooled down? And I dont mean the ignition process or simply turning off the input power. I mean how to get the gas inside the darn thing to stay in the containment field until its been ionized? or is it ionized already? Anything at all would be much appreciated. =]

Topic by Capn howdy  

Bonding hydrogen and oxygen to make water? Answered

Ok, so I got how to get water, but how do I condense it without losing much, and would it be at least a semi-efficient and/or fast way of obtaining around a cup of water? So, I have another question. I know, I've been posting a new question at least once a week for a while now and you're all probably like "Dark Master87, Y u no shut up and stop trying to do impossible things?? w(O;O)w" Most people on here probably know about electrolysis and seperating water into hydrogen and oxygen with electricity, but it's simple and I don't currently have a use for it. But does anyone know how to bond hydrogen and oxygen to create water? I'm expecting there to be heating or cooling involved, probably more likely heating. Would you light the two gases on fire? Or would they just automatically bond with each other at the point of contact? More importantly, would this be possible to acheive on the limited budget of a 14 year old hobbyist who *may* have access to *some* lab equipment, but probably not? Thanks for paying attention, if it's not feasible/possible, I won't mind if you nag about me never doing any reasonable projects. And also, how hard would it be to get the hydrogen and oxygen from electrolysis with losing too much of it? 

Question by ALogan97    |  last reply

Autodesk Design For Industry

HELLO!  You may have come here from the GE Appliances Home Robotics Challenge, if not, be sure to check it out.  It's easy to enter, just submit a photo or video explaining "What should a home robot do for you?" through the Giddy mobile app (details and download link on the link above). The GE Appliances Home Robotics Challenge runs from August 1 through August 15.  On August 22nd we will launch an expansion of the challenge right here on Instructables.  The topic will remain the same, but we'll ask participants to take it a step further and submit CAD files.  More info, prizes, and judging criteria to be released on 8/22/2017.  We'll post a link when it goes live! Details on the Autodesk Design for Industry series of challenges, a new flavor of the Instructables Design Challenges are also coming soon! 

Topic by design4industry    |  last reply

question about TIG fusion welding without filler? Answered

Hello, Does fusion welding of mild steel  with either acetylene or TIG result in the same metal structure; is all melting the same ? Here is a rambling explanation of why I am asking. I wanted to start acetylene welding again but have found that the gas prices here in the UK are even worse than I Imagined. So, I thought to buy a TIG welder : I will be mostly welding 1.5mm mild steel sheet. I used to enjoy fusion welding with acetylene and hardly ever used filler; does fusion with a TIG welder result in the same molecular/chemical structure as acetylene ? The reason I ask is that, I looked at hundreds of online opinions about TIG fusion welding of mild steel and generally they all said not to do it as it will cause the surrounding metal to be brittle; but they were proper welders doing proper structural things; I am only doing scultpures and all of of my stuff from 20 years ago is still holding . . .  so if TIG melting is the same then I will go for it, Thanks

Question by FriendOfHumanity    |  last reply

Where can you buy Deuterium?

Hi I am trying to obtain deuterium for a nuclear fusion reactor I am building if any body knows where or how to obtain this object please write back.

Question by SienceNerd    |  last reply

Extract heavy water?

I can't get hold of any heavy water so I want to try extract it from normal water, I only need a drop or two. I was gonna use electrolysis to separate the atoms and increase the concentration if heavy water till it gets to around 70% (min.) but how much of power do I need to pass though the wires to only separate H2O and leave the D2O? (Need the deuterium for a fusor I'm building)

Question by JunaidA44    |  last reply

Has anyone had the new Krylon Fusion paint totally crap out on them?

I messaged Krylon (Sherwin Williams) about it, and they said it wasn't normal, maybe a bad nozzle and they replaced the can, but the next can did the same doggone thing! Very frustrating!

Question by penumbra_    |  last reply

Beginning with fusion 360, trying to CAD few already available objects, designing a soap holder dish.

Hello, I am a beginner with CAD and with fusion 360. I am trying to model out some already available items, I tried few solid objects which went well and to gain more experience I selected this soap holder/dish as shown in the below images. I am using a vernier caliper to get dimensions of the soap dish. But, I am not able to get it to design correctly since the object has too many curves and crevices, especially from the bottom view and legs for which I am not able to figure out a workflow. Can someone help me with planning out the steps needed to get the desired CAD. Unable to upload the partially complete .f3d file since files other than images are not supported in a question.

Question by hussainb    |  last reply

How Do I Measure Excess Heat? Answered

I am planning on making a Cold Fusion Reactor(CFR) and would like to know how I would measure that.  Please explain to me what excess heat to me and how to measure it.  NOTE:  Please leave out rude comments on my CFR and just answer my question?

Question by Kalrag    |  last reply

Post your favorite Ubuntu Mod/Customization!

Here is the place to post your favorite Ubuntu mod or customization, You all probably know from my instructable, it is the Mac OSX Theme...

Topic by KenGriffin    |  last reply

How do I measure Wattage? Answered

Alright, in my cold fusion set up I need to measure the watts going in and the watts going out.  How can I do that?

Question by Kalrag    |  last reply

is the ford Mondeo gonna be sold in the USA? Answered

Im wondering if the Ford Mondeo is gonna be sold in the USA, and what it will be called. i think it will be the next crown vic, but it will be sold in USA, as Fusion 3rd gen

Question by jason the redneck guy    |  last reply

Resistors? Answered

I'm trying to do the evaporator workaround for the Ford Fusion. Instructions from this page say to use 37kOhm 1/8 watt resistor. No one has this. Can I use other wattage rated resistors such as 47 kOhm 1/2 or 1/4 watt ?

Question by DaleH48    |  last reply

Ember's Mechanical Designs are now Open-Source

We released the mechanical design files for the Autodesk Ember 3D printer in Fusion 360. Here's what I wrote about it on Ember's blog: The full design of Ember in Fusion 360 is now available for you to freely view, download, inspect and modify.  I've been having a blast with the explode model function! We're sharing these designs under a Creative Commons Attribution-ShareAlike license, the same license Arduino uses to share their design files. Just like the formulation for our resin, we're explicitly inviting you to understand, remix, and remake Ember.   Ember's Mechanical Designs are now Open-Source

Topic by ewilhelm    |  last reply

How to weft hair and /or tip it? (Human Hair)

Anybody know how i can do it? I have 3 kilos of greta human hair from china. I would like to make it usable to others but don't know how? I heard it was good for "fusion" the way it is but unusable for extensionand other styles. I need to know how to make it usable?

Topic by witlesswonder    |  last reply

Are you going to ISTE?

Anyone going to ISTE this year in Philadelphia? Is there anything you are excited to see or do there?Instructables will be at the Autodesk booth along with our friends from the Tinkercad and Fusion 360 teams. Come find us and say hello, and learn about some of our new teacher-friendly features. You can also decorate a tote bag and grab some cool swag!

Topic by randofo    |  last reply

Din-Ink! The pen is mightier than the fork.

Want to know what a designer or a food writer might use to eat with in the future? These Din-Ink pen caps/utensils let you eat your food and then write about it immediately after. It's a bizarre fusion of two ideas and I'd be concerned about some sauce getting inside the cap, but it certainly is a conversation piece. link

Topic by fungus amungus    |  last reply

Similar songs

I was wondering... I'm performing on May 9th and was told I needed a song which was a fusion of two songs. 'Something Stupid' by Frank Sinatra was my first choice but I need another song to go with it. I was thinking 'Songs of Love' by The Divine Comedy but i'm not sure. The song doesn't have to be too well known but as long as it's not obscure. Any help?

Topic by ti112    |  last reply

Using Autodesk Fusion 360 or other package to make Lids and other form fitting parts?

First off, thanks for all the great posts and Instructables, I hope to be able to add to the growing collection sometime soon with a few projects I need to document.   Recently I have been trying to figure out a good way to create form fitting shapes with decent tolerances for  PLA printing.  I am using Autodesk Fusion and Blender using Boolean CGI operations, specifically the  Cut / Difference option. to create a appropriate sized cap.  If you have a peek at the attached image, the top part (red)  was used as a tool to cut out a matching body from a smaller cylinder (blue).  In the real world If these are printed, the shape would never fit together and if you did, you could never remove them.   What I would like to do is alter the bottom half to shrink it's surfaces inward about 0.25mm to allow for the expanding of materials. Every time I've inquired about this on some other forums, the first response Is  'Just use resize' and make the bottom half larger.'  Great idea, but there are a problems.  The inner plate/cylinder and radius walls expand to be too large The height changes, leaving a gap between the two surfaces Any suggestions would be great. I believe there is a path using Differences / Intersect and subtracting that, but I've been failing to find a solution to it.  I have included the Example top as an STL file.  Thanks for any suggestions.  And No this is not for a school project. Just a hobbyist looking to understand CAD.

Topic by dewclaws  

i'd like to make a rfid chess board that can record the position of the pieces in real time for game analysis,?

It's called a blitz board, when the clock is hit it records the position of the pieces. then the full game is converted by software to a game database.  i have programming experience and electronics experience but it's been a while. trying to figure out where to start.?

Question by fusion    |  last reply

Any Way to Easily Obtain Deuterium?

I've had an interest in how physicists obtain deuterium for their experiments (especially those dealing with nuclear fusion).  I know it comes in small quantities in water, in the form of deuterium oxide ('heavy water') .  It also comes in the form of 'heavy methane' also.  I've looked at several patents dealing with extracting deuterium from such sources.  Is their any do-it-yourself (DIY) techniques that could use every day materials to obtain deuterium?

Topic by bigboy4006    |  last reply

Paint on rubbery material is sticky?

I used spraypaint (krylon fusion for plastics) on a material kind of like the plastic ruberry outside of wires, cables, cords, etc. It feels really sticky to the touch and I don't even know if I want it on anymore (I don't mind either way). What's the best way to go about this? If I wait long enough will the paint dry and stick to the material? Or should I remove the paint, and how?

Question    |  last reply

Tesla Coil Hat

Tyler Christensen, or christensent of MITERS, the MIT Electronic Research Society, took a more high-voltage approach to Halloween this year.  He made this awesome dual resonant solid state tesla coil (DRSSTC) hat! Last year he was responsible for the "Build a Fusion Reactor" Instructable.  This year, his likeness to a mad scientist seems to be increasing!  How long before we see him splice a tesla coil and a human?! More info on his blog: tc-engineering

Topic by T3h_Muffinator    |  last reply

What is a good COMPLETELY free mac hard drive cleaning software? Answered

Hi! I am curious because I have an iMac that is running os x Yosemite, and it has 28GB left on a 1.11TB (terabyte) hard drive.It is just over a year old, and has a fusion drive (like a hybrid drive only better). I have looked all over to find a cleaning software that is COMPLETELY free. notice I emphasize the COMPLETELY part! Can anyone help? Thanks in advance!

Question by www139    |  last reply

Wiring up a filter copasitor?

For my Cold Fusion Project I was told to use a filter copacitor with the isolating transformer and the bridge rectifier.  I have had some trouble understanding this.  The mains AC runs through the isolating transformer and right after that I need to hook up the filter copacitior.  How do I know which is positive and negative.  I know AC alternates between + and - but when I need to hook it up to the rectifier I need to find + and -.  How do I do that?

Question by Kalrag    |  last reply

How do I understand what the heck a cyborg is?

I'm not a cyborg myself... and I'm making an article about them. Can someone point me in the right direction (DIY bone conduction implants might work, or IR HUD) and I'm talking mostly about a mental fusion of man and machine, which I am sure I and most of Western society are. But  on a more fundamental level. Also, I wrote a few shorts on deaf people, some of whom were cyborgs, so I'd be glad to publish them on t'Internet somehow.

Question by j4jackj    |  last reply

Reduce current but maintain voltage?

Do resistors reduce voltage or amprage? It's amprage as far as i know. I've got a power supply thag outputs 9kV at 300mA and I need to get it to 9kV at 0.2mA, someone suggested a 450kOhm resistor. When I phoned go get one they asked if I want a quarter watt resistor, what does that mean (1/4, 1/2 watt). I need to reduce the current comingfrom the power supply because I'm using it to power a fusion reactor and the diodes I have to comvert the AC to DC can only handle 0.02mA

Question by JunaidA44    |  last reply

How to back paint clear plexiglass so I can reverse laser engrave?

I'm trying to back paint a piece of clear plexiglass so that I can reverse laser engrave. I'm then going to backlight the piece with an LED panel but I want the paint to be opaque so that the light only comes through the engraved pieces if held up to the back painted side. It will then have a nice look because the clear acrylic will give the lasered piece floating characteristics. I'm able to create this effect using black krylon fusion spray paint, but it just seems to take 3-4 coats in order to block the light out through the paint. I've tried black vinyl, block out sign vinyl and a variety of painted applications but nothing seems to work better than paint. The vinyl applications are also troublesome because the margin for error is too high with vinyl applications as I need the piece to be very consistent on the black reverse side.  I've also found products out there specially made for reverse engraving, but they are extremely expensive, and upwards of 150$ for 24" - 48". I've talked to a couple people that recommended Krylon Fusion normal paint, I'm just worried that if I were to use a roller,  or brush, I'd see the brush strokes from the clear side and it would ruin the piece versus using spray paint, which is slightly difficult to get a consistent piece.  Does anyone have any recommendations for what kind of coating or solution I would be able to use?

Question by Bdilla    |  last reply

What size maintenance staff?

At an industial facicilty that cuts and welds polypropylene sheet to make huge tanks for steel mills and other industries, three buildings, 24000 sq. ft fabrication area, 4000 sq. ft for mixed sizes of offices, 5 propane forklifts, 1 mobile crane, 4 overhead cranes, 2 utility trucks, 2 heavy duty pickup trucks, several powertools, several extrusion machines, various rigging lifting and handling apparatus, a 25HP rotary screw compressor and a 10HP dual piston compressor, various shop machines and saws, seveveral pneumatic presses and fusion machines, and tons of other miscellaneous stuff. How many guys do I need to maintain it all?

Question by DrBrown    |  last reply

Who else here is enjoying last week's official Gutsy Gibbon release?

I know that I'm not the only one in the community of nerds here that is loving Ubuntu's newest release! Now that I finally have compiz fusion running smoothly on my 64 bit system, I think that it blows the legs off of an already feeble Windows Vista. Even some of my less computer-literate friends, after seeing my system, are trying live cd's and considering dual-boots! I think it's pretty exciting seeing a more user-friendly Linux with standard eye-candy to lure even more away from the Microsoft OS monopoly. Still a ways to go though...

Topic by a grain of alt.    |  last reply

Can this work for DIY 3d metal printing at home?

Using metallurgical powders with a precision depositing feeder, layout a layer at a time (obviously) of the part you want to develop within a certain size parameter.  Lower the layer into an induction heater coil to raise the temperature of the powder to just below the melting point then hit it with a low power laser to melt the powder together to make the part, again layer by layer.  Theoretically removing the need for high power lasers and either a vacuum chamber running constantly or a constant stream of shielding gas.  Edit: You apply a vacuum or shielding gas only during the fusion cycle, hence the induction furnace. Removes the need for expensive vacuum chambers or heavy use of shielding.

Question by malleolus    |  last reply

in addition to my RFID chess board Q, i'd also like to know if anyone has a source for LCD clock faces.?

Thing is, i'm an old school blitz player and i know a lot of others are as well. digital chess clocks are cool, but there is something cold about a seven segment display. also the chronos clocks are super expensive. we like the look and feel of analogue clocks, but like the accuracy of digital. i mean the ultimate for me would be to have a clock with a stepper motor and control it directly, but that's out of my realm right now. what i'm looking for is a lcd clock face that has the look of an analogue clock. like the image included. this way i could have the best of both worlds, a countdown timer with an analogue face. plus it would make for a great kit.

Question by fusion    |  last reply