Is this feedback gonna work????
Question by ouwelou | last reply
It is you duty as an American after all ;-)Unfortunately, I'm only 16, and thus cannot vote yet...Well, before this turns into a God v. Darwin thread (FSM forbid!), let me just remind everyone to Be Nice - no political bashing; you're welcome to say why you want to vote for such and such candidate, but let's not say how much the other guy is awful and start a fight, cause that's not cool.So, are you voting? Who are you rallying for? Why? How? True or False? GO! ;-)
Topic by Labot2001 | last reply
If you've seen the news you might have seen that the state of Florida is in the path of a tropical storm. However if you are in the state, seeing local coverage, you'll know that we're in the path of a Class 12 DeathStorm!!! In reality, the situation is even more dire than even the local news reports, I'm down to my last beer. One plus, it only took an imminent natural disaster to get our governor to visit the state, he's been too busy campaigning for mccain. I just want you to know, that is I don't make it out this time, the gold is buried under a big W!
Topic by Tool Using Animal | last reply
Im wondering if the Ford Mondeo is gonna be sold in the USA, and what it will be called. i think it will be the next crown vic, but it will be sold in USA, as Fusion 3rd gen
Question by jason the redneck guy | last reply
A pastel is a very sought after caribbean dish. Many people crave it because of its rarity, for you see, you need caribbean ingradients and caribbean know-how Those who can make these, can really impress their friends. I'm gonna make a pastel (pastelle??) instructable soon. I just wanted to ask, has anyone very eaten one? did you like it? Do you know stuff about it?
Topic by Keith-Kid | last reply
I have a complete, motor/wiring harness/controller/charger out of a wrecked Spirit Scooter it has bad batteries but the motor runs. I would like a 20/30 mile ride between charges 50 would be even better. The motor is 24v 250w 14a How much of a battery system will it take to get the numbers I want or is it feasible? I have a second one that is in great condition that just needs batteries. I don't want to molest it just yet.
Question by Charley Davidson | last reply
I would like to make water cooling for laptop. But not sure if it will cool good enough, tell me what you think. I'm thinking to use copper tube, plastic tubes, some reservoir. In reservoir should be wave maker for aquarium (like this one: http://www.amazon.com/gp/product/B009YEEW2K/ref=pd_lpo_sbs_dp_ss_2/175-5374395-0420233?pf_rd_m=ATVPDKIKX0DER&pf;_rd_s=lpo-top-stripe-1&pf;_rd_r=03QDBA7BQG1ZPRCY7GAP&pf;_rd_t=201&pf;_rd_p=1944687582&pf;_rd_i=B013Q5RTFO) for quiet (without noise) water circulation through a tube.
Topic by RoS9 | last reply
You don't i will.... just ummm wait till i clean my room, if i ever do
Topic by Silverpoint | last reply
Cheesy titles aside, this is serious buisness! i live in houston, and the hurricane is heading strait for us. i'm a little scared, of course, and the roads are all clogged. My mom has been looking around for gas stations with gas left... it's a pretty big deal. houston is 45 miles from the water, and the hurricane has been moving around towards us, and gaining speed, all overnite. i'm praying to god it doesn't strike. the mayor has had press conferences, cancled work and school... we may have to evacuate! i'm hoping this won't be another katrina... any thoughts?
Topic by AnarchistAsian | last reply
Question by mdavidson12 | last reply
I have a 75 watt mirage nano 8 inch sub, it's really meant for quality, not quantity, but I need a little more out of it, anyone have any ideas, I've heard that poly fill can make it more efficient and make the coil work less, so louder results. If I had the money, I want this pioneer sub that my friend had, a 700 watt 18 inch sub or something like that, it was unaturally large.
Topic by Punkguyta | last reply
My cousins finally getting one and he wanted me to ask the question online because he dosnt want to get one and them to make a knew one like weeks later. -M
Question by GianniMora | last reply
Hey, i'm gonna be building a simple desk for my computer. and i was just wondering if anyone knows what kind of legs i should use for it? also how should i attach the legs to it? bracket, nails, ect. its just gonna be 3/4"x 27"x50" piece of plywood. then i'm gonna make a monitor stand, and a keyboard tray. thanks
Topic by HTF | last reply
Any chance of extending voting deadlines? Do we get 1 vote?
Question by Toga_Dan | last reply
I dont know what type of bamboo it is but just in case how would i make it so its not toxic?
Question by Don,t try this at home | last reply
These eyes, cry every night for you These arms, long to hold you again The hurtin's on me yeah But I will never be free No my baby no no You gave a promise to me yeah You broke it - you broke it These eyes watched you bring My world to an end This heart could not accept and pretend The hurtin's on me yeah But I will never be free no no no You took a vow with me yeah You spoke it - you broke it These eyes are crying These eyes have seen a lot of love But their never gonna see another One like I had with you These eyes are crying These eyes have seen a lot of love But their never gonna see another One like I had with you These eyes are crying These eyes have seen a lot of love But their never gonna see another One like I had with you These eyes cry every night for you These arms long to hold you again These eyes are crying These eyes have seen a lot of love But their never gonna see another One like I had with you These eyes are crying These eyes have seen a lot of love But their never gonna see another One like I had with you These eyes are crying These eyes have seen a lot of love But their never gonna see another One like I had with you These eyes are crying These eyes have seen a lot of love But their never gonna see another One like I had with you..
Topic by FunkNattidelic | last reply
I am gonna make all (yes all) the perk machines from Zombies. Well besides Im gonna do them life size. Im also gonna be making them functional(lights and the perk songs) as well, but, i need help to make it function with the bottles and everything. is there an easy way just putting a coin in and BOOM! Juggernaut comes out of the machine? Can anyone help me please?
Question by DasFitz
So i was going to make a desk. I was gonna make it about 2x3 and make the top out of two pieces of plexiglass, with about a 1 inch hollow area between them. I was gonna put some lights in that area. However, Plexiglass is costing a bit more than i want to spend. so I found this: http://www.homedepot.com/h_d1/N-5yc1v/R-202653810/h_d2/ProductDisplay?langId=-1&storeId;=10051&catalogId;=10053 Its ALOT cheaper. However, can it support a decent amount of weight probably? No ones gonna be sitting on the desk or anything. I would say NEVER more than 50 pounds on it, but 25 is probably gonna be the maximum, and not even that most of the time. (just gonna have my laptop and stuff on it, maybe some textbooks). And im assuming a blue light LED would shine through it fine..I kind of want the frosted look (would sand it down a little bit to get rid of the "bubbles") to give it an effect similar to the lights in this: https://www.instructables.com/id/LED-Glass-Desk/ except without the notifications and stuff.
Topic by abkarch | last reply
Hi guys! Im gonna make 5 mini ball machines!! i will make them and you will decide on the winner They will be mini!! so dont go off thinking they're gonna be like shadowman's awesome bm's I'll make\post the first one today or tommorow -megametal8
Topic by MegaMetal8 | last reply
A few lines from chappelles show well, see you later oh yeah, and Dave..... POP! WAYNE BRADY BITCH! is Wayne Brady gonna have to choke a bitch? "White people like Wayne Brady because he makes Bryant Gumbel look like Malcolm X" - Dave Chappelle, "my mother in law is never gonna believe i met Wayne Brady.." yeah, because she's never gonna know!" -snaps the cops neck- lmao ah, good times with Wayne Brady, lmao
Topic by Yerboogieman | last reply
i'm gonna start off with a reverse sear and cook these indirect at 250 degrees until the steaks reach an internal temperature of between 110 and 115 degrees. After 45 minutes at 250 degrees, our steaks have an internal temperature of an 115 degrees now I'm gonna remove them and let them rest while I crank up the heat to about 600degrees. And now for the sear I'm gonna sear these for about 5 minutes per side until they reach an internal temperature of a 135 degrees. Now after a 10-minute rest that will give us a medium finish. After about 2 and a half minutes, I'm gonna give them a quarter turn for the nice hash marks. Now after 5 minutes I'm gonna give them a flip for 5 minutes on the other side. And there you have it Prime and Aged for 6 weeks Tomahawk Ribeyes. I have never had a steak this good the flavor and the tenderness and the richness is absolutely amazing! One of the best steaks I'll ever have! Thank you guys very much for watching. Learn From Video https://www.instructables.com/id/How-to-Cook-a-Tomahawk-Ribeye-Steak/
Topic by MyChicagoSteak
We honestly have no clue... Were both teenagers and we need money :O Also : What should we do like hand out fliers or buisness cards or i dont know... :O pleasee help :D
Question by shellyrose | last reply
i have intel g31 ddr2 motherboard 1gb ram installed and no graphic card. i'm gonna install 1gb graphic card and another 4gb ram ooh i have dual core processor i'm not gonna change the processor is it work ? can i play these games.. shift 2 dirt 2 gta v thanks for helping me...
Question by ishan udyoga | last reply
I need a 24v DC power source, and I have a few spare 12v Laptop adapters lying around. I know you need to connect the positive end of one to the neg end of the other, but something tells me that's gonna create a short somewhere. Not sure how this is gonna work. Any advice?
Question by Fuzzy3D | last reply
Those it really matter if i led my circuits on a breadboard or those it make any change if i use another things ells from the breadboard? lets say i use something ells like for example a plastic or a peace of word. i interne to use a peace of plastic so i can use wires to let my circuits together from bottom. will the wires affect my work if its done correctly? And please could someone get me out of this doubt? those it matter witch company produces transistors, or those it matter the type of transistor, or those it matter the size, or those it make no difference. I am asking thing because i am unable to locate the B C and E on each no matte witch type i use, so i suspect it being the reason why i have been unable to complete my project. maybe it could be that i need to know by a means of testing through something? Please i am asking because i do not know. hope its not bored to say. I hope it will not disturb if i do not connect my circuits directly but through wires to link to each of them.
Question by RdNard | last reply
i'm gonna make something different, which is new pcb board concept so, I want u to give me your personal opinions That are just 5 questions, so it took within 5 min. :D http://goo.gl/forms/A8e7zBGtJT
Topic by GS YU | last reply
If I heard it right, there's gonna be a Netflix streaming limit that's only gonna let you stream one movie at a time. Well that just sucks, I wanna be able to watch Netflix streaming movies on more devices since I don't always want to watch the same movie the rest of the family is watching. So is there any way to download Netflix movies and work around that Netflix movie streaming rule or anything like that?
Question by meetgreg | last reply
Once again someone thinks the world's gonna end soon. Someone is suing CERN because their afraid that the new atom smasher (Large Hadron Collider (LHC) along the French-Swiss border) is going to create a black hole and suck up the Earth in a month or so. I think its gonna be another failed doomsday theory, like it probably will be.
Topic by wingman246 | last reply
Hi guys + gals, i got burning question in my back. Does anybody have any idea how to make a really simple motion sensor? ex: I've been wanting to make something,kinda like an simple installation. It's gonna be a small fishes, so everytime somebody passed my fishes, the eyes of the fish gonna follow the movement of that person. Any help would be deeply appreciated. thank you before hand for the ideas and suggestions.
Topic by arnie04 | last reply