Smoker Grill

Looking at the DIY's for a smoker grill, why not just use your weber grill with the hotplate, air slots at bottom can give access to hot plate thermostat. You can make a rod with an end fitting to fit over the thermostat knob for fine tuning during operation.

Topic by phantom9   |  last reply


Smoker Grills

Looking over the DIY's for smoker grills. Why not use your Weber Charcoal Grill with the hot plate ? Slots at the bottom can provide access to hot plate thermostat. You would need to make a tool, rod with end fitting to engage the thermostat knob. cord can exit the grill through one of the bottom slots.

Topic by phantom9   |  last reply


CPU grill?

I recently decided to make a mini-grill (similar to the gas/charcoal ones found around the site), but I want to be able to do it with electricity. My plan is to overheat a CPU with a heatsink attached and allow the actual heatsink to be the grill. The only trouble is that I can't figure out from the pinout which pins I have to supply power to. Could anyone give me an indication as to which pins they are? Also, any other advice would be appreciated. =) CPU Pinout: http://download.intel.com/design/Pentium4/datashts/29864312.pdf

Question by DELETED_DELETED_Taneth111 


Grill forge

I have read most of the homemade forge instructables posted here, but I don't think any of them would work for me, because in my fascist city, you are not allowed to burn ANYTHING except for cooking purposes (technically even fire pits are illegal). My idea was to get a cheap grill lid that I can put on my charcoal grill. I would then cut holes in it for air flow (a hairdryer, of course) and an opening. Would this be an effective forge? I need it for detempering, annealing and tempering blades. Also, what fuel would you recommend using (as in, a certain kind of charcoal/wood)? I am making throwing knives and I have every other thing I need. I'll probably make a slideshow when I'm done, as making knives is a pretty well 'ibled subject.

Topic by Wolf Seril   |  last reply


eBq bbq grill

DIY BBQ grill made by Alex fleming

Topic by ebqbbqmaster   |  last reply


???BBQ grill igniters???

All the outputs are labeled positive and arc to each other(very confusing)

Question by AlbinoMoose308   |  last reply


Smoking on a gas grill?

I have a question on smoking on a gas grill. I have a 2 burner grill and i was wondering when smoking do i have on both burners or just 1? Also where do i put the smoke chips and meat? If anyone could help that would be great. Thanks again.

Question by Log1   |  last reply


DIY BBQ grill

Hello, I'm building a BBQ from an old 20ltr water boiler. I need to make the grill (where the meat goes). I'm thinking about making it from rebar. Would this be safe? I looked to buy one premade, but don't find one the right size

Question by MaDoGK   |  last reply


How to convert propane grill to natural gas?

I have a propane grill that I would like to convert to use natural gas. There is no conversion kit I can find on the internet or at stores.

Question by    |  last reply


What do I need to convert my propane grill to burn hydrogen?

I see a lot of conversions from LP to NG, but not hydrogen. Any help would be great! Thanks

Question by ollenii   |  last reply


Donwload a PDF Archive

How I can Donwload a PDF  Archive

Question by vlady13773   |  last reply


How to make a propane burner using black iron pipe. Answered

I have a grill that has 4 burned out cast burners and I would like to make some new one for it myself.  Problem is, the instructable for making the black iron pipe burner seems to no longer be on here. Thanks! Thanks for the link.  Not the same as the instructable I saw before, but good stuff.  The one I saw months ago had horizontal cuts that made it ideal for a bbq grill burner replacement.  Would still love to see that one again. Thanks again!

Question by RADollar   |  last reply


Is it possible to convert a natural gas grill over to a propane grill?

We have a Jenn air natural gas grill that we are unable to use because the house we are currently in does not have a gas line. I've seen a lot of kits to go FROM propane to Natural, but not the other way around, which is what I need. Its a nice grill, I'd hate to let it go!  

Question by afelton   |  last reply


Warning Light for Gas Grill

I get a text yesterday "Hi Dad, Are you going to be home soon? I left the house and forgot to turn off the grill." The grill is in the back yard, a few feet from the kitchen window. The grill connects directly to the house gas supply, so it will never run out of gas. I have found the grill on days after someone finished cooking. So far, we haven't burned down the house! I am searching for a product that would put a large blinking light on the kitchen window. It blinks when the grill is hot. It would remind me and my family to turn the grill off. Anyone know of a product that I could buy to do this? Seems like a natural Arduino project, I'm just short of time now to make it. Thanks, in advance. -Frank

Topic by fcohen   |  last reply


Grilled beef ribs recipes?

grilling

Question by psbern   |  last reply



Smoker Racks?

I am building a Smoker out of Pine Lumber and would like to hear ideas on  What Metal would be best for Food Smoker Grill Racks?  Or would Wood be better ?

Question by Scottenterprizes   |  last reply


BBQ Burner?

I'm thinking of building my own Pig Roaster / BBQ, the problem is I want it to be 60" long and I have not found a propane BBQ burner that is long enough. Can you make it out of Black Gas Pipe? If so what diameter should the burner holes be? Regards, Dennis

Question by thexporter   |  last reply


The USBBQ

Got a new idea today, but i really didn't know how to make it. Thats why i'm posting it here. The usbbq, an USB powerd BBQ (Fancy name uh?) So, small BBQ (altoids tin). Heated by a piece of Nichrome?. On/Off button. And vóila: Something that makes everyone at the office so jellous that they die. Good for popping popcorn (like five a time) or heating a marchmallow. if anyone has some good tips, i would love them

Topic by mrownsalot   |  last reply


I have a plasma cutter and an 80 gallon tank to make a fire pit. I need help on the design Thanks,Steve

I've googled fire pit and seen some really fantastic designs from John T Unger. I'd love to have something anywhere near as cool as some of his stuff... I have a plasma cutter and a mig welder, however this is my first project with the plasma cutter... so I don't want to try to get too fancy and blow it. The tank is large enough that cut in half I have 2 chances to make something nice. I've googled pumpkin stencils, buddha stencils, flames and flame stencils and dragon stencils. I like arabic art and design along with the list above. Please help with ideas. Thank you!!! Steve

Question by Ststephen7 


Shocker from grill igniter/lighter?

If i were to take the igniter out of a butane grill lighter and hook it up with wires i would have to put a capacitor in order for it to HOLD a charge correct? Cause i beleive without any extras it will just make a shock when pressed?

Question by trf   |  last reply


Concrete propane grill - Heat issues?

I'll be making a concrete counter top for my outdoor kitchen. I'll shape a "box" in the concrete (just like a concrete sink), and build the propane burners into that. Will I run into any heat issues with the concrete? Should I line it with something to shield it from heat?

Topic by DenMike99   |  last reply



How can I make a mini grill? Answered

I want to make a mini grill.What is the best way to do this?

Question by bylerfamily   |  last reply




Green Barbeque

For the eco-grillmaster: charcoal or gas? Slate explores this issue. The result, of course, depends--but surprisingly enough, charcoal may be the better option for the environment. Link

Topic by joshf   |  last reply


What is an efficient way to remove any traces of paint from an Altoids lid or anywhere else with paint? Answered

There are toxins in paint on altoids tins. How do I get it all off so it doesn't riddle my food with lead?

Question by mason0190   |  last reply


where can i find 55 gallon steel drums? Answered

i need one for projects like a charcoal burner or just storage. but they cost about 60$ new. i always see them as trash cans in parks in such so i guess their cheap use, but where do you find them used?

Question by finbar galdeep   |  last reply


Night time Solar cooking

How would you like to cook with Solar power...after the sun went down?  It looks like MIT is on to something for the next step in Green tech. I found this idea very inspiring and it really makes the mind think of other uses beside just cooking after dark with the Sun. Think about useing this as a home heating device or water heater.  We could get millions of people off the electric grid with this type of invention if scaled up or engineered for the right useage. Any other ideas out there folks?

Topic by RedneckEngineer 


WATERMELON?PEACHES?PINEAPPLE?

I like grilling fruit but this has gone too far, why didnt someone not add any other grilled fruit,now really?

Topic by Sunny124613   |  last reply


Converting a 55 gallons (200 liters) drum into an oven and grill

On the Chilean TV show Hagalo Usted Mismo (Do it yourself) it is showed how to make a combination of an oven and a grill using a 55 gallon (200 liters) steel drum. Although it is in Spanish, the video shows how to make it step by step. An important note mentioned in the video is that the drum must previously stored non toxic products.

Topic by blkhawk   |  last reply


How do you keep YOUR grill grates from rusting over and your food from sticking?

I have tried a dozen different methods to prevent rust. Just cleaning it after every use with some grill cleaner then wire brushing alone before using again seems to keep the rust to a minimum at best on my original top grate which i believe is stainless, my bottom grate is the replacement flat one from Menards and that one doesn't rust yet but the black coating is quickly disappearing. My food sticks terribly to both grates no matter how much Pam I spray on them. What do you do for your grill? What's that one thing you do different that makes your neighbor pissed when he is out buying a new grate? At this point I'm thinking a good high speed drill w/ wire brush and then rubbing it with lard or some kinda congealed fat.   OOooooooohhh. I just had an AWESOME idea, I'm gonna go rub it down with my used bacon grease then maybe a warm water rinse so there's not enough to burst into flames later.

Question by Andale_The_Great   |  last reply


What is your Favorite Food to BBQ on Independence Day?

Hey all,  I'm hosting about 12 people or so for Independence Day and want to do something on the BBQ that's up to the occasion.  I enjoying grilling and smoking quite a bit so I have equipment on hand.   Often we've done burgers, or chicken, or ribs for the 4th of July but I'm hoping to be a little more creative this year.  What are you planning on putting on your BBQ for Independence Day? Equipment available: Gas grill; Charcoal Grill; Kettle Smoker Dietary constraints: none Nmber of People: 12 Burgers? Ribs? Chops?  Ideas?

Topic by SpringRobin   |  last reply


anybody know how to keep a lit gas from lighting the gas in a fuel tank? I'm building a hydrogen stove or burner.

I need to keep the lit hydrogen from lighting the compressed tank of hydrogen. The only things between the burner and the tank is a hose and a valve.

Question by Ultra Computers   |  last reply


I built a stove that burns alchohol.But it burns to fast.How can I prevent this?

I made a stove that burns napkins soaked in 50% alchol.When I lit it it burned fast for a minute.Then it went out.The napkins were still slightly wet.But when I tried to light it again it would not light.Is it my percentage of achohol?

Question by bylerfamily   |  last reply


how to build a roof over a 3ft. x 8ft. grill table ?

How to buid a roof over a 3ft.x8 grill  table using a 4x4 post on each end of the table

Question by ChristopherM47   |  last reply


Barefoot Waterskiing, Mini S'Mores Grill, Burger Recipes

  Barefoot Waterskiing Mini S'mores Grill Burger Recipes Chocolate Stuffed Strawberries Tetris Ice Cubes PVC Sprinkler Toy Cooking From Scratch DIY Barbecue Sauce Memorial Day How to Fish USB Flag Memorial Backyard Theatre Fly a Kite Grilled Eggplant Parmesan Build a Water Mortar  

Topic by randofo 


Can i use a grill igniter to light Black powder

I am building a golf ball morter and I don't want to use fuse could I use a grill igniter?

Topic by Boomstick3402   |  last reply


Top 10 BBQ Instructables

With the 4th of July quickly approaching and summer heading into full swing, we've selected some of our favorite barbecue-related Instructables. These are not only about the cooking, but also about the whole barbecue experience--from meal accessories to the grill itself. Don't forget about the BBQ PDQ Contest, which is open until July 6th! Ground Beef Burgers For a fresh, from-scratch burger, check out this recipe. You can follow it all the way from grinding the beef to serving the completed burger.   Grilled Stuffed Peppers You can do a lot more with the grill than just making burgers, hot dogs, and chicken. These stuffed peppers are a great way to use your grill for a very different type of meal. Cut A Watermelon No summer barbecue is complete without watermelon— and you can cut your watermelon and remove the seeds at the same time. Jello Fruit Salad This Jello fruit salad brings a sweet, summery touch to go along with your main meal. Make a Pie Crust Trying to make a classic 4th of July apple pie? Use this pie crust and fill with whatever you like to make the perfect pie. Sweet Soy Ribs For a different spin on grilling ribs, try these sweet soy grilled short ribs or use the marinade to coat something else. Frozen Banana Smoothie What could be better than enjoying the summer days with a cold fruit smoothie? This frozen banana smoothie will satisfy anyone at your barbecue. Start BBQ Coals If you're having trouble getting the coals to light for your barbecue, check out these helpful tips to get your grill going strong. Build Your Own BBQ For a slightly larger project, you can make a barbecue area in your own backyard. This professional-looking project would fit in well in any yard. Hobobeque Or, if you want to be questioned by police (or family, friends, neighbors, etc.) you can try the revolutionary hobobeque. No explanation can do it justice, but it would certainly make for an interesting BBQ story. With these BBQ recipes, tips, and ideas, your barbecue can be more enjoyable than ever before.

Topic by joshf   |  last reply


Semi-permanent Shell for Fire Pit to Make an Oven

I'm looking for a semi-permanent solution to making a fire pit into a wood fire oven. The shell could be something modified from an existing item or something from scratch. I'm thinking a dome shape similar to a brick wood fire pizza oven would be best, however I would want to be able to remove it so the bottom portion is functional as a fire pit and could also be used as an open pit/grill. It would probably be more on than off, so semi-permanent is okay. The pit itself would only be about 2 1/2 to 3 feet in diameter, so nothing too big. As far as functions, I would have a grill at the top of the fire pit (maybe height adjustable within the fire pit, but that's getting kinda fancy). Then in "oven mode," I would have the grill in and put a ceramic pizza stone on top of it for baking then the cover on top. And perhaps even without the stone as a smoker/meat slow cooker. Ideally the cover would be well insulated to keep the heat in and well distributed. It would also have a cutout or door for putting in bread or pizza (rather than a cover that lifts off losing a lot of heat in the process). I'm not sure what materials would be good, but it should probably weigh no more than 75-80 lbs. (light enough for one strong person or two middling strength people to lift). Maybe an inner dome of some metal with a layer of some kind of flame resistant insulation and then another outer dome of more metal? It would also have to be weather resistant for cold winters. Some assembly might also be good as the individual parts would be lighter, so long as being in pieces doesn't compromise the overall effectiveness of the "oven". I've tried searching for a few things, but nothing has really popped up that fit this description. Any ideas would be greatly appreciated. Thanks!!

Topic by sgzepik   |  last reply


Contest suggestion

Do members ever get to make suggestions for contest themes? I was grilling this weekend and thinking it would be awesome if we could have a grilling contest this summer. I bet there would be a bunch of entried and it would give us all some great grilling ideas.

Topic by shangrilarcadia   |  last reply


Guitar amp/baffle front cover cloth??

I need your help!! to find an alternative way of making or getting a front cover for an amp/baffle... You know the kind of grill stuff, I've seen, full metal grill, simple cloth, or a wierd hybrid... Any way, like some massive tights or something? any help would be great!!!

Topic by gavox   |  last reply


does any one have any advice before i start cooking on my altoids grill? Answered

I just finished my mini altoids grill and wanted to see if anyone has any more advice befor i start cooking it has paperclips as the bars and paper under neath to burn. PLZ ANWSER RESPOND ASAP!!!!!!!!thanx

Question by kylekosan23   |  last reply


RIBS? Answered

Ok I want to make a special Dinner for my Fiance this weekend. and have some questions... I have a sauce already, I just want the cooking instructions.. I'm not opposed to using the oven a little, but I want the flavor from the grill as well.. I have tried ribs several times and none of the times have I been happy with them. the best ribs I have ever eaten have been boiled and then grilled the following day, but I tried this and they were tough as heck! I am no noob on the grill, I can make a steak that would make a cows mouth water! chicken, sausage, vegetables even Pizza! yeah you can grill pizza! :) anyway, I was thinking Baby backs! anyone know a good, easy, fool proof method for cooking them? Open for side dish ideas as well..

Question by SlickSqueegie   |  last reply


How to synchronize the brightness of a grille-mounted neon tube/LED bar to a car's tach/speedo?

I have a 1997 BMW 328i, and I've been thinking about installing either a neon tube or a bar of LED's in the grille of the car to use at night (most likely not street legal, I know). I want the brightness of the tube/bar to be controlled by one of two things: The speedometer or the tachometer. I.e., if the speedometer is at 0 MPH, the light is off, and if the speedo is at 75 MPH, the light is fully on. Same thing with the tach, light off at 0 RPM, light fully on at redline. Unfortunately, I haven't the slightest idea how to use the car's computer or the gauges themselves to set up a control module for the light. If any of you has a good amount of knowledge about automotive gauges, I would appreciate your help!

Question by Jonny Katana   |  last reply


How do you cook a steak on a cast-iron grill pan? Answered

I bought a cast-iron pan with the little elevated parts to make it more like a grill since I would have to go use a community grill and usually I am just cooking for myself. I have tried different recipes and have either found it's way too done, or just not cooked right (and still cold and red in some spots). I think I am getting closer, by searing it at the highest temp my oven can get for a few minutes on each side, but for a decent cut (around an inch) it seems that isn't actually cooked, and then I put it in the oven for what I heard was a short amount of time (I like medium-rare to medium steaks) and it was very well done... Any one have any recipes that works well for them? Also how do I not fill my house with smoke when I try to sear the steak?

Question by downgrade   |  last reply


Cheesy Friday

What could be better on a cold, rainy Friday than grilled cheese sandwiches? I know, nothing! Sarah and I made some last Friday, taking inspiration from this Instructable. We used aluminum foil instead of freezer paper, and put butter on the outside of the bread so we got lovely browned sandwiches.I made another today. It's my New Favorite Method!

Topic by rachel   |  last reply


how can i generate enough heat to make toast from a 9 volt battery? Answered

 i want to make an altoids can toaster but im having trouble finding a safe way to generate enough heat from a 9 volt.... any ideas? the only way i know of how to make heat from a battery is by causing a short circuit which is dangerous, im sure theres a better way!

Question by davej6694   |  last reply


Can cigarette lighters be used for a mini spud gun instead of the long nosed, or grill lighters? Answered

I've been trying to make a mini spud gun, but all the instructables say that you need a long nosed lighter or grill lighter. Can the piezo electric ignitor be found in a cigarette lighter. I have no experience whatsoever in these type of things, so an explanation would be helpful. Thanks.

Question by Ananand   |  last reply