sad days

Anyone ever fell like when your sad you want something warm in your body. i have a theroy that its only on rainy days in which you should have soup its the only aprotriate time

Topic by bommber man 11 years ago  |  last reply 11 years ago


SNOW DAY!!!!!!!!!!!!!!!!!!!!!!

Here in Illinois we have a snow day. district 300. what about you?

Topic by DELETED_DELETED_kruser495 11 years ago  |  last reply 11 years ago


Be Nice Policy

Hi, I have created "Be Nice" memes for everyone to share here on Instructables. I thought it would be a fun way to share your thoughts using the Instructables Robot. You can download the images I created HERE. I will add more as I think of them or through suggestions from YOU. I have also added templates for you to create your own images. If you do create your own and wish to share them, please add them to this community post or to my original Instructable. Thank you and remember to Be Nice. Tater

Topic by Tater Zoid 4 years ago  |  last reply 3 years ago


Tech Day

3/26/2008 is tech day at my school. There are going to be lots of exhibits of robots, etc. in the library. I was thinking about making some stuff for it, but I can't think of anything. Can you guys give me any ideas, and maybe a few links to Instructables? They all have to be cheap, since I am already working on two VERY expensive projects, and basically have $20 USD of spending money left.Thanks, and MAKE IT FAST!!!!!

Topic by YummyPancakes 11 years ago  |  last reply 11 years ago


fathers day

I want to give my dad something special for fathers day on 21st june but I am stuck for ideas. I preferably want to make something and have it not be to hard to make.  Any ideas?

Topic by dollowl 3 years ago  |  last reply 3 years ago


Did anyone have a bad day today?

Today is Friday the thirteenth. If anyone had a bad day, just say it here. Dont worry, This topic is to help cheer ppl up. For me- The day was fine enough.

Topic by DJ Radio 10 years ago  |  last reply 6 years ago


I have a Joke

Ok this is the Joke A Catholic engaged couple are in the car and the die just before the wedding and the go to heaven and they are at the pearly gates and see a pastor. they ask him if the can get married in heaven and he says "I'll go check". Four days later he comes back to the couple and hes says yes you can. Then the married couple says "Well 50% of marriages end in devorice. Can we get devoriced in heaven? and then the pastor says. For the love of Pete women it took me for days to find a Preist dfo you know how long It'll take me to find a lawyer!

Topic by Metal4God 11 years ago  |  last reply 10 years ago


And I was having the most fantastic day......

Really I was, I got into work, and had no real tasks to accomplish since my mentor was home sick and his boss was sick. Except she was so sick she asked me to do her job. So I got to spend 9 hours escorting 4 PE's all over to different locations. Climbing on roofs, crawling through mechanical rooms. digging things up, getting wet and dirty, all while trying to maintain a professional appearance.  I loved it!  I can't even express how much I love going to work, being an engineer is awesome. But then I got home to discover a microburst had hit our neighborhood. And was filled with anticipatory dread as I noticed the 65 foot oak in front of my house was no longer visible over the neighbors roof line. Well, the pictures below speak for themselves, there was only one way this thing could fall and NOT hit something, and it fell just that way. And if I hadn't been home late from work, my much loved truck would have been right under the trunk.

Topic by Tool Using Animal 8 years ago  |  last reply 4 years ago


Happy Father's Day to me!

A perfect Father's Day - left to have a sleep in, then when I do wake up, greeted with a rather nice bottle of whiskey and an Instructable! Thank you, Roger-X & Conker-X!

Topic by Kiteman 6 years ago  |  last reply 6 years ago


Valentine's Day Inspiration

After getting our first newsletter, Roger sent me this really nice thank you note and pictures of his project. Maybe his inspiration can inspire you? There's still a little time left!I want to thank you for this newsletter. I was at a loss as to what to get/make for my wife for Valentines Day and our 15th anniversary. After reading your newsletter and going to your web site, I was inspired. I made her 15 Duct Tape roses (14 purple ( her favorite color), and 1 Red for passion) , one for each year we have been married. Off the web site's Valentines Day projects, I made an acrylic heart with LEDs to light it up. I added an acrylic tube to act as a vase for the roses. Thank you for the inspiration, Roger

Topic by ewilhelm 12 years ago  |  last reply 12 years ago


Have you ever had a microwave oven talk to you before? Answered

Mine likes to say, "Hi." A picture of this is attached.  There is indicator light that says, "Hi." When my microwave says, "Hi" to me, I say, "Hello! Hello microwave oven! How are you today?" And it just keeps saying, "Hi, Hi, Hi," until... it is done cooking. When it's done cooking it makes beeping noise, and then it tells me what time of day it is, and then it acts like a clock, telling me the time of day, and it keeps doing that until when I tell it I want to cook something again. I wish a happy, happy April Fools' Day unto everyone!!!

Question by Jack A Lopez 2 years ago  |  last reply 2 years ago


1 more day!

Only one more day before the 2 year anniversary of knex on instructables!!!! i have a special present for knex so make sure to see it tomorrow!

Topic by dsman195276 10 years ago  |  last reply 10 years ago


Father's Day Instructables

Oh, damn, Father's Day is almost here and what can you give the guy who claims to not want anything? Well, we have a few suggestions for you. We dug through the ol' archives to find some things that just might make your dad happy this weekend. We hope this helps as a few of us are also scrambling to figure out what to make as well.If you have any suggestions for other appropriate Father's Day Instructables, post them in the comments! Etch a Shot Glass  Concrete Lightbulb Wall Hook Jackhammer Headphones Brew Beer! Carbonated Fruit Dirty Soap Beer Helmet Free Yacht Make a Lure Fire up the BBQ! Smoked Sausage Handmade Pipe

Topic by fungus amungus 10 years ago  |  last reply 10 years ago


What is a racist these days?

Lately I have a problem accepting certain things when it comes to the label "racist". As some might know I decided to live in Australia and here we have what you might call a "multicultural population". Laws and tolerances have changed and these days swearing in public, using abusive language or say anthing that can be seen as racism brings you in big trouble. I never had any problems making friends with people from all over the globe, no matter what ethnic or religous background they have, but lately I get the feeling that this is not true for everyone. With everyone I don't mean the big bad racist living down the street or the gang of thugs that only attacks certain people - by everyone I mean those migrating to start a new life in a different country. If I walk into a shop has no pricing or product labels in english and I notice the shop keeper is unable to use english as well, would it be wrong to call this racist? If I can't use the local swimming pool at certain times as it closed to the general public so only one ethnic group can use it - isn't that racial discrimination too? Ignoring simple things like the dress code for women can get you into big trouble in many countries and if you insist on you individual rights and call those ranting against your violation being racist, well chances are you won't make it through the day. The other day I was called a racist and "complimented" out of a shop after I complained noone in there is able to speak english and that I am unable to read simple things like the price of an item. All I said to a shopkeeper (that until then pretended he did not understand anything I say): "Why the hell do I have to learn chinese in an english speaking country just to go shopping? We all speak english in this country, accept it or if you don't like it leave." I think I have enough friends from different cultural backgrounds that would happily confirm that I am not racist in any way. But I do think the term is abused and misused in recent years as we are expected to cater for all the needs anyone might have - regardless if we would see the same as guests in their home country. Racism often comes from cultural differences and misguided views on certain things as simple as what type of food you can or can't eat. So my questions up for debate : Do you think failing to integrate yourself into the customs of a country like learning and using it's official language could cause problems? Do you think the support for people migrating from other countries is driven too far in certain areas, like providing citizenchip tests in foreign languages or with an interpreter instead of insisting on learning the official language before applying? Do you feel left out if your work mates use a differnt language while you are around? Is it correct to call someone a racist if he refuses to employ people that are not from his country of birth? Are you a racist if you think people with your citizenship should respect your country and be able to speak and understand your language? Do you think the support for foreign cultures in your home land has gone too far or would more support be better? (like allowing schools for selected language backgrounds without the requirement to use or teach the official language and school topics) I know this topic might be a bit of puch for some but my intention is to find a better understanding on why cultural integration and related racism has come the extreme state we currently see in many "modern" countries that offer good social security. After all we all have to live together somehow, increasing tensions is never a good thing and I think if everyone would have a better understanding better acceptance of local customs all could be easier. I hope it is ok to start a topic like this for discussion, if you feel it is not right please use the flag function and report it.

Topic by Downunder35m 4 years ago  |  last reply 4 years ago


Happy Earth Day!

Happy Earth Day everyone. As the Earth Days keep on coming on I see it as the one day where everyone pretends to care about green issues and then go back their regularly scheduled polluting or the day that reminds us that we still have work to do. I keep changing my mind about it. So what does Earth Day mean to you?

Topic by fungus amungus 11 years ago  |  last reply 11 years ago


happy pi day!

For me, maybe not for you it is pi day today!march 14 is pi day (3/14)check out these links for more pihttp://www.vvc.edu/ph/TonerS/mathpi.htmlhttp://pi.ytmnd.com/http://www.ballandclaw.com/upi/pi.50000.htmlhave fun :Pedit: okay, maybe you didnt know this yet but pi day was over a month ago now!

Topic by ich bin ein pyro 11 years ago  |  last reply 11 years ago


Last Day at Instructables

It's my last day here at the Instructables office. It's been a wonderful summer, and I'm glad to have worked with everyone here: at the office, and the people I've interacted with on the site. Curious about my impact this summer, I did a bit of statistical analysis on the last three months, and I wanted to share it with you. It's not completely precise, but it gives a good ballpark. Ironically, though I have done laser cutting, 3D printing on both the UP printer and the Objet, CNC embroidery, and even CNC papercutting, I never bothered to install the office printer. So I had to show my graphs from a laptop screen. Here are my stats, as of August 17th: I published 69 Instructables total this summer in about 89 days, (65 official work days). (I have a lifetime total of 88 from some previous Instructables.) Here's a graph of the Instructables building up over time. (Blue is data; the thin black line is a fitted trend.) It's pretty linear (with a slight dip at the end of July, when I went camping and couldn't post). The averaged rate is about 75% of an Instructable every day this summer, or just over one per day if you only count work days. 63% of my summer’s Instructables were featured. I had a quick learning curve; after the end of May, 75% were featured. It was a little more difficult to extract further data, so the remainder of my statistics refer only to Instructables I published while working here this summer which received over 1,000 total pageviews. Overall, these Instructables generated 294,224 pageviews (almost three hundred thousand!), 89% of which were from unique viewers. People spent a total of 14 hours, 11 minutes, and 28 seconds viewing these Instructables. To the left, you can see my summer pageviews accumulate, and to the right, the day-by-day graph of my pageviews. The peaks on the right graph represent, in order, my Infinity Dress, the Clockwork Beetle, and the Plaster Face Cast. (Since I made these charts last Friday, it doesn't take into account my Temari, which whould have created a spike as big as that of the Infinity Dress over the weekend.) Although those are my top-viewed Instructables from the summer, my favorites are actually these ones: (and working on Psycho Scooter Scramble, of course) I'm glad to have such a measurable effect on the site and the Instructables community. The people of the site and in the office have made a strong impact on me as well. This is the first place where I feel a true sense of community among a group of people I know exclusively through the internet, and I want to thank all of you who I've never met in person for being my friends. In the office, I'll thank you personally. It's been a great summer, thanks to you. I'll still be around the site from time to time, but I can't devote every day to it. I'm finishing up my Neuroengineering degree at Olin and working on a few other things besides. But I'll be around, and I hope to talk to all of you from time to time. See you around, and happy making! -SelkeyMoonbeam

Topic by SelkeyMoonbeam 6 years ago  |  last reply 6 years ago


Valentine's Day Dinners

All of those restaurants are charging a premium for mediocre food on Valentine's day; stay home and make something instead. Instructables is full of great recipes that can be made quickly and easily; the pictures make it (virtually) foolproof. I've included some suggestions below to get you started; feel free to add your own favorites.I'd recommend picking things that can be made ahead, preferably the night before, so you KNOW you've done them right. Or at least things that require little preparation; pick only one thing that requires attention just before serving.All of the recipes listed below are easy, and most can be made ahead of time except where noted. Light and fruity is probably the best choice for Valentine's dinner; I've also steered clear of heavy garlic. If you can lay hands on a nice-looking table cloth and/or cloth napkins it will be a bonus. Cloth napkins will fool most anyone into thinking you're classy.Appetizers:Mangos (prep ahead; cute and fruity)Avocados (prep ahead; fruity and a nice complement to mangos)Main dish:Catfish (fast prep, wide cooking window)Scallops (quick, but require cooking just prior to serving)Bulgogi (again quick, but requires cooking just prior to serving)Side dish(es):Beet salad (make ahead; cut into heart shapes for bonus points)Roasted fennel (minimal prep, wide cooking window)Artichokes (minimal prep, entertaining to eat)Green salad of any typeDessert:Trifle (make ahead from easy ingredients; make individual servings in big wine glasses if you've got them, or a short wide-mouthed "old fashioned" glass.)Frozen ginger/mango (make ahead with any fruit juice combination you like)Chocolate truffles (make ahead; bonus points for chocolate)

Topic by canida 12 years ago


Your Project, posted elsewhere?

It's always nice when your work gets popular, and the latest example is Artist-in-Residence Tomdf having had his tentacle straw project featured on Hack-a-Day.  I found this out because I saw it on their twitter feed. Have you had your Instructables featured elsewhere?  How did you find out? (And are you following the Instructables feed?)

Topic by Kiteman 6 years ago  |  last reply 6 years ago


Theres this girl i have a crush on at skool?

Theres this girl i have a crush on at skool i would like to get her a b-day present she likes soccer and smiggle any suggestions

Question by allenmt 8 years ago  |  last reply 8 years ago


Snow Day Homework!

Three out of four of Kitefamily have got a snow day! Only Roger-X has had to go to school, but #2 son's teacher set him homework! He had to build a snowman and take a picture of it. Unfortunately, the snow is too powdery to pile high, so he scraped and swept the snow together to make a picture of a snow man. He got a little carried away, though - I had to stand on a chair to fit it all into the photo.

Topic by Kiteman 9 years ago  |  last reply 9 years ago


BUILD DAY AT THE OFFICE

Every last Friday of the month is Build Day here at the office. Sometimes we all get bogged down with emails and spreadsheets and bugs and stuff, so it can be kinda hard to make something. Today I'm gonna spray paint a new robot on the door a la Amanda: https://www.instructables.com/id/Laser-Cut-Robot-Stencil/ The yellow might have to wait- I cant find it! I did find this great orange acrylic color so maybe I'll use that! update: RANDY HAD YELLOW ACRYLIC! 

Topic by ReneediCherri 6 years ago  |  last reply 6 years ago


Must Be Nice Comments.

I've been trying to upload comments to a micro controller forum and it continuously tells me my post isn't nice enough or isn't formated correctly. This is getting vary annoying. This stupid policy of letting a poorly thought out filter program block comments that don't fit a "nice" format needs to go. This is the post I'm trying to make.I'm getting the following errors with the AtMega8. It must be a problem with the giveio driver which I have installed but it's still not working. All the forums say to just install it but that's not fixing the problem. I'd greatly appreciate any help."avrdude: can't open device "giveio"avrdude: failed to open parallel port "lpt1"make.exe: *** [program] Error 1> Process Exit Code: 2> Time Taken: 00:00""

Topic by enxion 9 years ago  |  last reply 9 years ago


Instructables Internship - Day 7 (Day @ Google!)

Sorry to keep you guys waiting, I've just been so busy having fun, etc ;)So, without any further adieu, Tuesday through Thursday! (in four separate posts, so that I don't overwhelm you)Tuesday: Google Day!So, yes, it's true. I got to go to Google to talk a bit about Instructables. Yes, it's true, I'm a terrible speaker. And yes, it's true, Google is awesome!I had so much fun at Google, I'm so glad that we (Billy and I) were able to go. We got to see Stan, the t-rex standing outside in the courtyard. We got free foodstuffs and shwag. We saw SpaceShipOne (I think it was a model, though), and had a great time. It's really cool inside Google; everyone's desk has something strange on it, some people are even in "tents." it's just wacky to the max. Unfortunately, my camera died after a few minutes in Google, so I wasn't able to take too many pictures for you guys v_v sorry.There's actually a video of about 1/2 of the talk up on Google Video, and it's already on the Instructables Blog hereAfter Google, we went back to Squid Labs, where Jason and I worked on and pretty much finished up Project X. All we need now is some fine-detail work and it'l be done!So, it turns out that Tuesday was the annual Squid Labs' Intern Barbecue Day! At 6, the BBQ started, but Jason, Noah, Billy, and I were all out in the back, "testing out" Project X. After a few attempts, and an attempt to modify Proj. X, we decided that our brains needed some food to operate in a more functional manner. The BBQ was nice, there was quite a bit of food, drinks, and socializing. TimAnderson and others were flying kites up on the roof-patio (where the BBQ was held), in a mostly-successful manner. We watched the sun begin to fall, and as Squid Labs has the best view of San Francisco, it was spectacular. Unfortunately, my camera was inoperable... due to lack of battery power, and I didn't get any shots of the sundown. v_vAnywhoo, We all got Squid Lab 2007 Intern T-shirts, which were pretty damn awesome. There's a pic of them at the end of the post.After, Jason, Noah, Mike, Mitch, and both of their girlfriends (Erica and Jenna) came down off the roof-deck to help perfect Proj. X. We did quite a bit of work on it, but after several failed attempts, we knew what we had to do. Unfortunately, it was getting really late and we had to stop working on it for the night. Work will continue on Wednesday!Then, Billy and Star (Starsterisk) were going to watch The Boondock Saints on the projector in the conference room, so I joined them for a bit. We (Eric, Christy and I) got home around 10:30... pretty DARN late....Cheers,-Muffinator

Topic by T3h_Muffinator 11 years ago  |  last reply 11 years ago


Have you done your part? (Mainly for UK readers)

It's Red Nose Day.Have you done your part?Comic interlude: You know it's important. Here's how to donate:1. Donate at https://donate.comicrelief.com/donation/ or click on the Donate sign above2. Call the Red Nose Day donation line on 03457 9109103. Pop into a Post Office or building society and pay into the Red Nose Day account4. Send a cheque or postal order, made payable to Red Nose Day 2009, to Ernst & Young, PO Box 51543, London SE1 2UG5. Pay in any fundraising money at http://www.rednoseday.com/fundraisingmoneyGo on, change a life in the here-and-now, instead of the by-and-by.

Topic by Kiteman 10 years ago  |  last reply 10 years ago


Valentines Day Contest

I doubt that I would ever have time to enter this contest but I'd thought I'd mention a flaw in the prize format for us pesky Canadians, and other potential areas of the globe as well.  I'd love to win a kindle fire, however they are not available to Canada.  Now I'm sure I could hack a work around for making the Kindle Fire function in Canada, but shipping directly from Amazon to Canada will likely be an issue.  Perhaps ship to instructables HQ and then ship privately to non-US winners (if there are any).  Or, offer a prize value, though I'd prefer the first sneaky work around.  Anyway, just something to think about, awesome second prize regardless.

Topic by iminthebathroom 7 years ago  |  last reply 7 years ago


my B-days tomorrow!! :-) :-)

Well, instructables B-day anyway. so you all better get me something nice!!! (just kidding)

Topic by dsman195276 10 years ago  |  last reply 9 years ago


Instructables Internship - Day 9 (AWESOME DAY!)

Thursday: AWESOME DAY!Thursday was just AWESOME! So basically, I learned how to use the Laser cutter today, and cut out THE FIRST INSTRUCTABLES BADGE EVER!(pic after post)After, I worked with Noah on Project X a whole little bit more, and we got it working, baby!I'm excited to see this thing go for real! But seriously, I can't tell you what it is, yet...Today was also the first day that I really got used to COREL draw, which enabled me to make most of the templates for everyone's badges, which I think are all pretty awesome. Everyone's got a customized "logo" and their username on the badge, which makes every Instructables badge original and personalized. Unfortunately, I didn't have time today to etch all of the badges, so that'l just have to wait until tomorrow.Later in the afternoon, Star asked me if I wanted to go sailing, to which I responded "What?" After I agreed to spontaneously go sailing with her and Tim, she brought me outside, where I learned that we were fixing up Tim's old outrigger canoe that he tried to sail to Cuba in. Tim, Star, and I were all working on the outrigger; lashing a makeshift trampoline on with bike innertubes... actually, most of the frame was held together with bike innertubes, including the rudder. Everyone was skeptical about us actually launching at all, assuming that we wouldn't launch in the dark of the night. Although, lucky for us, we were all "crazy" enough to launch in the dark. We geared up in fleeces, windbreakers, and life vests and hauled the outrigger out by hand (it was on castings), and launched it right next to Squid Labs. At first, Tim sailed us out of "port" (in the lagoon) and out into the Bay. It was spectacular. The moon, the stars, the SF skyline, it was all beautiful. Tim told us of his experiences on the outrigger while he was sailing back from almost Cuba, and proceeded to teach us more about boats in general. He then let Star take over the rudder and sail, while he lay down on the main hull. I was lying down on the makeshift trampoline, an old stretcher, by the way. We watched the stars over our heads, and, at first, the occasional passing of a brown pelican. Eventually, we came pretty close to "pelican island," a protected breeding ground for the brown pelican. Yet, the night was still young. We continued to listen to Tim speak about sailing, occasionally contributing to the conversation as well. It was all fascinating, not only what he told us, but the fact that the source of his knowledge was primarily himself. The other amusing part of the entire moonlit ride was the fact that Tim built the outrigger from essentially scratch, and most of it was lashed together with innertubes. Simply amazing. Eventually, I was given the opportunity to take control of the beautifully made outrigger canoe, and sailed us back from the bay, back into the lagoon, and back onto land. The whole trip was a once in a lifetime experience, although I hope I do get to go on a similar one soon enough. Thank you so much, Tim, for taking me out onto the bay, and thank you so much Star, for asking me if I wanted to go sailing in the first place. By the way, we got back to Squid at around 10:00, I believe, which was again, pretty late for a workday ;)I packed up my things and Tim/Star drove me home.That was pretty much it for that awesome day. Quite possibly the best day in the duration of this entire Internship.Cheers,-Muffinator

Topic by T3h_Muffinator 11 years ago  |  last reply 11 years ago


Mother's Day Instructables

Mother's Day is this Sunday and in case you need some last-minute project to make your Mom happy we've compiled a list of Instructables that you can use. Some take just a few minutes while others can take a little over an hour. Mother's Day Flower Make a flower that will never wilt. Sneakerdoodles (Snickerdoodles)Say how much you care with these super-sweet cookies. Peanut Butter Chocolate Chip CookiesThese chewy cookies are easy to make and will definitely impress her. Perfect English SconesStart the day right with some classic scones. Be a Mother's Day Breakfast HeroEven if you're terrible in the kitchen, you can use pancake mix and a bag to create some funky pancakes. Chocolate TrufflesMoms love chocolate, 'nuff said. Orange Clove Pomander (air freshener)This is an easy and classy way to infuse the room with a pleasant scent. Photo CubePrint out some famly photos and cubify them. Sharp Pencil Quality TVPut a series of photos together into a strip for an interactive photo display. Homemade Air FreshenerPrint out some family photos on an inkjet printer and turn them into a super-custom air freshener. Custom Lift-the-Flap BookIf you want to go all out, a personalized lift-the-flap book will be remembered for months to come. Pop-Up 3D messagesPut your Mother's Day message out there in full 3D! Go the extra mile with some decorations and photos around it. Flower Pop-Up CardAnother 3D effect that's easy to pull off and provides a pleasant surprise. Have any other favorite Instructables that would be perfect for a Mother's Day present? Let us know in the comments!

Topic by fungus amungus 11 years ago  |  last reply 11 years ago


HAPPY INDEPENDANCE DAY EVERYONE!!!

Hello everyone, tomorrow is independence day, do people in other countries have independance day? anyway, have a good holiday. and for you entertainment, the amp in my car!

Topic by Yerboogieman 10 years ago  |  last reply 10 years ago


Japan Day 2

I woke up around 8 or 9 and took a shower. Sarah and Seba had already left, the Czech couple was still around, but they were gone by the time I got out of the bathroom.I got dressed, threw on my backpack since I did not know if I was coming back, and headed over to a bike store I had seen the day before. I wanted to buy a cheap folding bike, so I could ride between the closer cities. I practiced my Japanese on the guy, who was really polite and helpful, and found out that he had two folding bikes. One was used for about 5,600 Yen, but it was pretty crummy, the other was new and very nice, but about 35,000 yen. I had about 23,000 yen left over from the money I exchanged at the airport, but I was wary about making any large purchases before I knew if my credit/debit card worked, so I said sumimasen and left.Wandered around the burbs of Nagoya for a bit before I stopped off in a chain mini-mart to test if I could get cash from an ATM, I couldn't. Took the subway to downtown, got off at the wrong stop, got back on, and ended up in Central Park, right underneath the large TV tower. I was trying to find something cool to do using my lonely planet guide, and eventually decided the robot museum sounded like fun. After wandering around for a good hour looking for it I gave up (I later found out that it went bankrupt and shut down). I was very disappointed, especially since I was wearing my robot shirt, and had a pocketful of robot stickers. After losing all hope of finding the robots, I went into a large mall (mostly because it was air conditioned) and rode the escalators for a bit. That got boring, so I decided to head over to Nagoya Station. During the long walk, I stopped off in every 7/11, Lawsons, Family Mart, and Circle K I could find, but I could not get money from any of the atms in them, which got me kind of worried.Got to the station and took some pictures. Decided to check out Noritake Garden sine it was not too far away. Got to the garden and relaxed for a while, before heading back towards central park. On the way back I walked through a really colorful open air market. Got to central park, and relaxed for a bit. Much relaxing is required when traveling with a extremely heavy backpack, and it is a gabillion degrees out.While sitting in the park, I looked down to see about 20 mosquitoes feasting on my legs. Those bites are damn itchy. Got on the subway and headed back to Changmi's house. Fell asleep.Japan Day 3

Topic by Tetranitrate 10 years ago  |  last reply 10 years ago


nice crafts to make for mom out of leftover craft supplies

Hi, I am in the mood to make something nice, and useful for my mom, I have a ton of random things to make stuff out of, any ideas?

Topic by PiggyBacon21 7 years ago


i have a question:

Unfortunately, this question is completely unrelated to instructables and it's DIY nature. i am turning 16 in april and was wondering about getting a job over the summer. if possible i wanted to get a job at the apple store near where i live (is it true you get a free iphone/laptop if you work there?) i would never pay for an iphone or macbook or anything expensive for that matter (i have no money) but seeing as it would be free, a job there would be awesome. anyway, i was wondering what kind of experience you would need in order to work there. i was assuming that they'd want me to have some sort of experience around apple gadgets and mac software. the only one im familiar wiht is the ipod. :-) the apple store iw ant to work at is in the mall. i was wondering if i'd be able to be a stock boy at least or something (if they even have one) anyway, i was just curious....oh and best buy too. there's one coming in and was wondering what kind of experience i'd need. it's a big store so i assumed id just stock things all day. if anyone knows about working at the apple store or best b uy, thanks for answering my question if you do. other (funny) comments are welcome, too. and for all you photographers out there: i want to buy a cheap slr and buy a nice lense for it. i want a canon rebel xti then later on buy a super awesome lense for it (seeing as the lense is much more important) is this a good idea? i'm really fond of canon and like the xti becuase it's decent and it's fairly cheap. what wouild be a good lense? i'd be using it for everyday camera taking and occasional art picturizing. am i making the right decision in doing this?

Topic by alvincredible 11 years ago  |  last reply 11 years ago


Japan Day 3

Woke up and took a shower. The French couple had left, so it was just Changmi, the Czech couple, and me at the house.I had read the day before that any foreign credit/debit cards will only work at the post office, so that was my first destination this morning. I found what I thought was the nearest post office online, and headed over. My debit card worked, so I took out enough money to last me for a while.Got back to the house, and then went out with Changmi to pick up her friend. On the way to her friends house we stopped off to get some rice balls (onigiri), I picked up a watch at a 99 yen store, and she bought an ice cream bar. After picking up her friend, we all headed back to her house, and she told me they would be filming for a bit, so I headed downtown. I had learned from the Czech couple, that a building in Nagoya Station has a free observation deck, so for the second time I made that my destination. I got to the station, rode up 14 flights of escalators, and took a bunch of pictures.After that I headed over to the osu temple where a local radio station had set up a concert / fair. I stopped to listen to the music for a bit before I checked out an even larger open air market than the one I had seen the day before. After walking around for about an hour or so, I headed back.Back at the house I relaxed in bed for a bit, before Changmi, the Czech dude, and I went to one of her friends bars. Her friends who own the bar have their own band, so we listened to some of their music, the Czech dude played some guitar, we all had some beers, and headed back.*Random note - It is so hot and humid, I decided not to bike around between the cities, because my dehydrated body would be found on the side of the road somewhere. That and the fact that I can get a local (read: non-shinkansen) train to Kyoto for only 25$. Sweet deal.*Random note 2 - They sell fireworks in 7 eleven. How awesome is that.Video of one of the acts at the concert / fair at the temple.

Topic by Tetranitrate 10 years ago


Japan Day 1

(I am planning on doing a forum post for each day of my trip in Japan. The first few days will just be copy pasted from my blog (but now with pictures, and image notes!), and after that I will type up the entry I kept for each day in my journal)I am writing this all on my eee pc, and, while I am getting the hang of this tiny keyboard, typing mistakes are common. I am also in various states of mental functioning so excuse any grammatical errors.I woke up at around 6:45 on Thursday morning. I had been feeling a bit under the weather, and was slightly congested. I really hoped that I did not catch something right before my trip. I woke up the other interns (Bilal, Josh, and Paul), because I knew they would be very sad and might cry, if I did not give them the last chance to say goodbye to me. We did a 4 way shoulder-tap, the universe imploded, and I was off.As I walked down Clementina I realized that it would be the last time I smelled that poo stench on the street. I had mixed feelings about this.The BART ride to SFO was very uneventful. Check in was amazingly fast. The line was short and moved quickly. I had almost everything I was taking with me in my carry-on. There was nothing in my checked baggage but knives and lint (one knife & one swiss tech mulikey). Anyway the whole process of checking in took about 15 minutes. The security checkpoint was even faster. There was no line, and for the first time in a long time I didn't set off the metal detector. I had shown up three hours before my flight to be safe, and I was now left with two hours and forty minutes to kill.I went to the currency exchange and turned 300$ into 27,000 yen. The Lonely Planet guidebook I have (which was printed just last year), has the exchange rate of one USD to 120 Yen, at the exchange booth they offered about 98 Yen for a dollar, google says the current rates are 107 yen to a dollar. Stupid weak American money. Anyway, I used ten dollars which I did not convert to yen to buy an english muffin breakfast sandwich and a gatorade. I went to my terminal, and accidentally dropped the barely touched sandwich on the floor while removing my backpack. I was hungry :(I read for two hours then boarded the plane at around 11. There were many people coughing on this eleven hour flight, so I did not have high hopes for avoiding sickness. Read some more on the flight, watched iron man in Japanese, watched iron man in english, and watched be kind rewind. They served two decent meals, and a few snacks in between. Ten hours later when we were finally over Japan, I went to the back of the plane, and stared out the window in the emergency exit door to get my first view of Japan.We landed around 2 pm on Friday. It was hot, so very hot (humid too). I filled out my customs form, got fingerprinted, and photographed, and made my way over to the baggage claim to pick up my knives. I made my way out of the airport to the train, and bought a ticket for what I hoped was a kanayama station bound train. Turns out it was. (cue the "ding" sound that is played on the audio tracks for slideshows, when it is time to change the slide). The first few pictures are of Kanayama station. There was a cool little inflatable pool, with little kids in miniature paddle boats. They also had a bunch of those water mist sprayers that people stand in front of to cool off.I relaxed at the train station for a bit before I caught the number 12 bus. I took it to the Ishikawa Bashi stop, and got off. I used a pay phone to call up Changmi who I had found on couchsurfing.com. I actually set up the couchsurf with her husband (who was out of town) who said it would be ok for me to stay, so I think she was a little surprised when I called. She said that she was currently hosting two couples who each had a small child. It was cool if I stayed, but it would be crowded. She picked me up at the nearest intersection with her mother, one of the couples, and their child in the car.We drove to downtown Nagoya and they let us out. Changmi and her mother were going somewhere, so I hung out with Sarah, Seba, and their daughter Maya. They were couchsurfers from France who had been in Japan for a couple of weeks. We walked around central park in downtown Nagoya for a bit. There is the large TV tower at one end of the park, and a bunch of art pieces scattered about randomly (metal taco boat thing). We went and got dinner, which I later found out to be pig intestines, with an egg, over rice. It was pretty good.After eating we took the subway back to Changmi's house and slept.Japan Day 2

Topic by Tetranitrate 10 years ago  |  last reply 10 years ago


How to make the most of a day? Answered

What would you consider to be the perfect way to spend a day within the time and funding constraints? I'm interested to hear your views and ideas, so express your opinion below. After all who expresses it better? P.s. Like in reality you have to live with the consequences of your choice/s.

Question by roblin90 9 years ago  |  last reply 9 years ago


Labor Day Weekend Sale

We are having a Labor Day Weekend Sale at Purple Squirrel. Come and celebrate the weekend and check us out. We have several kits, break out boards, and development boards and an Arduino bundle all of which will be on sale and shipping in the US is free.

Topic by Purple Squirrel 5 years ago  |  last reply 5 years ago


New Thing-a-Day Febuary

I'm aiming to try to do one new thing each day in the month of February, but I'm having trouble thinking of things to do, because I'm in a January slump. Any one have ideas? I'm so far at zero so anything helps! :)

Topic by shadowfeet 6 years ago  |  last reply 6 years ago


thing-a-day 2011 - who's going to do it?

Http://thing-a-day.com/ Of course, you don't have to do it officially... but I signed up today and I would like to see the instructables community try their hand at it! I've already got a list of projects to work on, and I asked off for quite a bit of time in February. I'm pretty excited! :D

Topic by jessyratfink 8 years ago  |  last reply 8 years ago


I have a plan ...

I have acquired, as a strict one-off, a quantity of solar cells.Apparently seconds that "work fine", the one I have unpacked is about 5 inches electrode-to-electrode, glass, and produces about 4-5V with no load in full sunlight. I assume the others are similar.A plan springs to mind. A plan to save money and be "greener". I want to use them to charge batteries during the day, then light my home with LED sources.A grand scheme, one that still requires the approval of She Who Must Be Obeyed, so I intent to take it is stages.Stage One: The Shed.I plan to install an LED light source, running off a battery charged by cells stuck to translucent panels already in my wall.Questions:what number and combination of (ordinary, cheap) LEDs would give a reasonable match for the brightness and colour of the currently-fitted 3-foot fluorescent tube?Is this a suitable circuit to charge the battery?Should I connect PV cells in series or parallel?Is there anything I should have thought of?

Topic by Kiteman 11 years ago  |  last reply 9 years ago


Thank You Veterans Everywhere!

I would like to take some time and thank all of the veterans that have served in any of the branches of the United States. I cannot begin to thank you guys enough for being so brave to fight for are country. It is a privilege to be writing this thanks right now. All I can say is just Thank You!!

Topic by Robot Lover 8 years ago  |  last reply 8 years ago


i have 3000 springs

I have like over 3000 springs and get more every day. what can i do with them? they are about 1 1/2 inches long and 1/4 inch in diameter.

Topic by glowdevilduck 9 years ago  |  last reply 9 years ago


how much monthes have 28 days in a year?

Question by fhranqasir 8 years ago  |  last reply 8 years ago


A week of weeks, these last 4 days have been.....

I hope I am not coming off lately as just complaining about life in general, but just letting those who know me well enough to want to know, how things are going. This has just been ONE OF THOSE WEEKS (and it isn't over yet ! ).  Monday and Tues, I had to help my wife prep for cataract surgery (two days off, but not really much of a "vacation"), Wed.  she still needed assistance in picking things up off the floor when she'd drop them....and today, I had to go in and meet my Mom at the Ear doctor (she's been around 60% deaf since early childhood, but never wanted to learn ASL).  They cleaned out her ears, checked the hearing aid, and put fresh batteries in it.....then since none of that helped, they checked her hearing. A 120 db beep was inaudible to her.   And, being quite advanced in age, and slowly slipping into senility, she is unable to accept this "new" condition.  It is very disheartening to not be able to help or do anything at all to help. I know this is not really a "social" arena, and is more geared towards DIY then just airing greivences,  but I thought I would share this one thing and hope I didn't irritate too many of you all out there. Thanks for reading....

Topic by Goodhart 8 years ago  |  last reply 8 years ago


​I have a .rar file

I have a .rar file that I created on my computer a few days ago. This was not entirely successful, because today I found that the archive is now not open. I didn’t set a password, and it looks strange. Than to open the data?

Question by BrooklynPerez 11 months ago


Instructables Internship - Day 2

Hello Again!Well, it's been Day 2 for me, here at Instructables, and truthfully; I'm having a blast!So, what'd I do today? Well, I cut A TON of stickers out for the launch of the new Instructables Store. I did some more "outreach" work (mainly having to do with the science fair contest), and I tried to find places where I could get some surgical tubing for the top-secret project ;).I also started working on posting 2 new instructables that I have already built, they should be up in a reasonable amount of time, hopefully.I found out another thing about Instructables, today. Everyone is excited about everyone else's work. You see, Billy (Tetranitrate) has this new project that he's working on, which is actually going to be super-super-awesome, and everyone's just so interested in his progress, it's pretty amazing. Even with site updates and layouts and stuff, everyone is so interested in everything, it's just awesome. I've been at other internships where the employees don't even get along, but here, they collaborate in getting stuff done. Oh boy, I love it here just a bit too much.OH, That's right! I worked on some images for the new, yes, I said new, homepage layout/design! I'm actually really excited about it, mostly because I'm bored of looking at all of the same images EVERY SINGLE TIME I come to the site, and also because I get to pick some of what's going to be used on the new homepage. You know, the best part of interning here is being able to give back to Instructables, and the DIY Community as a whole. However, being able to do what you want after lunch is pretty sweet, too. Tomorrow, I think Noah (NoahW) and Jason (The other intern) and I are going to pick up our materials, pick up some muffin mix for salad club and other assorted foodstuffs, and get to work on our top-secret project.Btw, I started thinking up a design for Instructables badges, and depending on when I learn how to use the laser cutter, I'll make 'em ASAP!Cheers,-Muffinatorp.s.: Sigh, I burned my Peanut Butter Sandwich this morning.... The picture looks nice, though...

Topic by T3h_Muffinator 11 years ago  |  last reply 9 years ago


Does anybody else have summer homework?

Is it not the most ridiculous thing?! I have to read 2 (count 'em - two) books and do a book report on each, one of which includes making maps, graphs, and a load of other stuff.To me, summer is supposed to be a break. Like, Christmas break, or Thanksgiving break, where there shouldn't be any homework given.And what's even more stupid (but slightly funny in a way) is that I'm going into 9th grade. All the teachers and counselors were saying how much stress you're going through, and then they make us do all this homework, which is major grade, be due on the first day of school?I'm not in AP classes either. Just 9th grade gifted! It's crazy!Geez! Shouldn't there be a law against this?

Topic by Bran 10 years ago  |  last reply 10 years ago


Instructables Internship - Day 3

Hello Again!So, What did I do today...During breakfast this morning I wrote up yesterday's log, which was exciting yet depressing... because of the burnt Peanut Butter Sandwich... no, that wasn't the top-secret project, DON'T WORRY!Other than that...hmm, well, initially, I just made some new "homepage images," then Billy and I attacked the semi-old yet miserably slow laptop that was attached to the "new" laser cutter and cleaned that out. Yeah, we made it run nice and fast =)After that, NoahW and I went out to Trader Joe's for Salad Club shopping. Yep, today was our day to cool lunch!Noah brought his mini-barbecue and we bbq'ed steak, chicken, and tofu! YUM! We also prepared a HUGE salad, which I'm not used to, 'cause I've never made salad before. For all of you who don't know how to make salad, basically, you get to kill a bunch of vegetables with a large, sharp, blade... VERY ENTERTAINING!Unfortunately, I forgot the muffin tin from "home" (Eric and Christy's House), so I wasn't able to bake muffins... there's always next week, though!After lunch, Jason, Noah, and I went out to home depot to get supplies for the top-secret project... I think I'll call it Proj. X, from now on. Anyway, we got all of the materials that we're going to need for Proj. X except for the surgical tubing V_v... it was just too darned expensive, so we're just going to order it online.However, tomorrow, we can start building! YAY!I'm starting to write up a new Instructable on my Hypercube Bubble maker, which should be published relatively soon. I'M EXCITED!I've also started on a template for the Instructables Badges, hopefully those will be rolling out of the laser cutter relatively soon, too!Umm... what else? Well, I MIGHT be able to make Cotton Candy Machine (Mark III) here! Unfortunately, I'm not allowed to use any of the heavy machinery (ie. the lathe), so I'll teach Billy how to use it and he could make my parts for me! This, However, depends on how much time I have to spend on projects, and if I'm willing to buy the aluminum (= a lot of $)Just for any of you who hadn't read my previous posts, I'm having the time of my life here at Instructables, and if you end up producing really nice Instructables, you might get the opportunity to intern, too! Remember, if there's a will, there's a way!Cheers,-MuffinatorP.S. I've included a picture of the view from my room. Yeah, I know, I had to make it all artsy... it's the Oakland Skyline at Night. It looks pretty cruddy in the "preview", so take a look at the full-sized image by clicking on the "I" in the upper left hand corner on the picture.

Topic by T3h_Muffinator 11 years ago  |  last reply 3 years ago


I need a project for the day?

Today is my day off I have nothing to do an all sorts of crap laying around my house. Any ideas of what to make with general household objects something interesting and non conventional. If somebody could point me to a good instructable that would be awesome.

Question by steeleman567 6 years ago  |  last reply 6 years ago


10 Day Design Challenge

Ponoko, a design platform, is sponsoring a summer design challenge for those interested in jewelry making. Starting July 1, you have 10 days to submit your design to the contest. The payoff: $1000, free advertising, and some free products.Link

Topic by joshf 10 years ago  |  last reply 10 years ago