Search for head in Topics

Behold, my second attempt at an instructables contest! This is the second installment of the Head to Head challenges, my first one kind of petered out after one winner. :PThe rules are simple: volunteer members will be asked to create an Instructable based on the movie or the short film 9. Whoever creates the better Instructable (higher quality, cooler, featured, most voted for, etc) will win the patch seen below. This time around, there is no deadline (but try to keep it within a month), and you can compete with up to four different people at the same time. Just remember, only one of you will win. I will allow up to four separate competitions, same as the last challenge.Have fun, hope this isn't too confusing!http://www.imdb.com/title/tt0472033/ _x_VS._x_ (VS. _x_VS._x_ )_x_VS._x_ (VS. _x_VS._x_ )_x_VS._x_ (VS. _x_VS._x_ ) _x_VS._x_ (VS. _x_VS._x_ )

Who here head bangs i do and it gives me a head ace is that a bad thing? Well tell me if you do and remember keep head banging

What should be a apporiate heading for a instructable which uses 5 LEDs and a arduino to get out different effects on the 5 leds

I've come up with a great way to play heads and tails on the web! first a person (the challenger) asks someone to play. then the defender PMs the challenger to call heads or tails. then a moderator (adrian monk) will flip a coin at her end and declare the results publicly. if the defender called the winning side, he wins, if the defender called the losing side, the challenger wins

 heads up just got a new camera  instructions for full auto gun should be up in 3 weeks or more maybe less btw thanks innovanna,knexinventer,and The Red Book of Westmarch for subing me

I've decided to test an idea for some friendly competition. The rules are simple: two volunteer members will be given a week to create an Instructable based on a common subject. Whoever creates the better Instructable (higher quality, cooler, featured, most voted for, etc) will win a patch similar to the images below. Because this is the first run, and I can't think of a subject, the competing members will have to agree on a subject of their choosing. If there is a flood of volunteers, the community will vote on who they want to see face off. In this trial, I will allow up to four separate pairs to compete. If this doesn't make any sense, well, I just woke up! :PThe stats are as follows:Lithium Rain VS. gmjhowe: Card, any kind of card, and it has to plug into a computer. Deadline: to be determined. Matt1497 VS. watermelonhead : Duct tape hoodie. Deadline: 10th of August. _x_VS._x_ :subject. _x_VS._x_ :subject.

I just had an idea for some friendly competition. I'm not sure if this has come up before, I tried searching but came up with nothing. A forum topic would be posted asking two or more volunteer members to create an instructable based on a common theme, say, a steampunk altoids tin device. They'd be given a week to post their instructable, and whoever makes the better iBle gets a patch. I was just wondering what your opinions are. Also, I haven't thought of a theme yet.

I busted the back of my head open an a coffee table an it has left a knot. Im afraid of what it is. I shouldve went to get stitches but didnt. I wonder if it just growed back wrong or its something serios. Help? What should I do?

I want a heads up speedometer for my 2000 Toyota Echo. I'm not sufficiently skilled to design one yet. Anybody wanna jumpstart this?

Hi, can anyone help me ? I need to put a mechanism into a latex puppet head to allow it to 'speak' and lip synch while I either operate it ie 'I speak - it speaks' or so that it can tell pre recorded stories. Can anyone please tell me how I can do this ? Thanks jeff

Hello, All I need a bit of help, I have an Over Head Projector [O.H.P] that I really want to make into a projector for my home P/C I have a couple of L.C.D from laptops. Even 2 [O.H.P] L.C.D from View Sonic, But no cables !!!. for the View Sonic units. Any Ides. Phil. Austin,Tx Stay - Safe

I need help with my headset, its just a little microphone and speaker, but when i put it in the headphone port, it doesnt read anything on voice recorder thing. Help please

This steampunked Mr. Potato Head by Sarah Calvillo is awesome. Especially cool is using the butt compartment for the mouth. Super sweet! Spudnik: Steampunk Mr. Potato Head via BoingBoing

I'm making a replica deadmau5 head and as trim around the ears and head, I want to add LED lights.  What all will I need and how can I program them to change color by fading through the spectrum?

For Halloween, I'm planning on making a large stone angel statue, and I'd love to have the head move back and forth. Thing is, I need to be able to control when the head moves, not just have it swinging back and forth randomly. Any ideas on how to do this? Any feedback is appreciated. Thanks so much.

I'm going to be shaving my head for charity, in order to microfinance third world countries. I was wondering if anyone on instructables would like to help by donation. I'll post before and after pictures on here once I get the amount of money we need (Which is about 1800 dollars, to buy a proper carpentry set for a man in Ghana.) I'm also working with people in my community to do this. You won't be scammed as you don't need to give me any money. Here's how it'll work: 1: Post here how much you'll donate 2: Go to KIVA.com and register an account 3: I will provide you with a link to the recipient 4: You will donate the money on a given day, at which point (when I see that the transaction is through) I will shave my head, pictures and all. 5: You may laugh at my discomfort.

Hi All, I want to build a motorized panoramic head. It must be made in PIC or ATMEL because I have only these options. Arduino board are not available to me  How it works.  Its basically controlling two stepper motors using inputs from photographer. Photographer inputs values in parameters and than microcontroller uses these parameters to rotate camera frame and take pictures. Parameters are as under: There are two stepper motors. One motor rotates frame of camera on x-axis and one rotates it on y-axis.  1. For x-axis motor parameters    a. Total numbers of steps to rotate.    b. One motor movement = 1 stepper motor step or more. For example we can move stepper 2      steps in on movement    c. After each movement (point#2) It takes image or press camera button by using relay or optocoupler    d Time Delay : When camera takes picture it takes time to save on memory card. We can define time in seconds as per picture size.    e : When it completes total number of steps defined in step#1. It moves back to its zero position. 2. For Y-axis moto parameters     a: When first motor completes its full number of steps than y-axis motor is activated.     b: y-axis: Total number of steps      c: one movement = how much motor steps. just like x-axis motor parameter     d:   Time Delay : same as x -axis motor. time delay after tilting frame.      e: y-axis motor just performs only one movement. Than again it activates x-axis motor.     f: Panoramas are made in multi rows. so this process of x-axis and y-axis motor activation should keep on going. It is terminated when y-axis motor completes its total number of steps. So the whole process is like this Turn on microcontoller  Add parameters for x-axis and y-axis motors click on start button microcontroller starts rotating frame on x-axis Frame start moving in steps. Than frame completes its first x-axis turn now microcontroller activates y-axis motor. Y-axis motor tilts frame upper arm in one direction.   code checks it is Y-axis motor final movement or more to come. If more than it activates x-axis motor. X-axis motor starts repeating whole process which it previously did. Than after full movement on x-axis and it activates y-axis motor. This process is terminated when total movement defined for y-axis motor is achieved. CAN ANYBODY MAKE ITS CIRCUIT AND PROGRAM CODING ? I M TOTALLY BLANK IN MAKING CIRCUITS AND WRITING CODES.

Hey All, In my car i have an after market HU with a usb port that my iPad 3/ iPhone 4s / iPods can connect to. However when my iPad is connected to it is unable to charge. The charging indicator in the iPad has the little lightning bolt going through it, indicating that it is indeed charging however the iPad looses about 7% of its battery every hour. Does anyone have any suggestions on how i can get my iPad to charge through my HU? Cheers  

How do i make optimus primes head help me.

Does anyone know where the quote from the Combichrist song Shrunken Heads For All Occasions comes from? If you haven't heard the song, there is a voice saying "Now, shrunken heads for all occasions, collect 'em, swap 'em, give 'em to your witchdoctor friends". I've tried searching for it, but with no luck whatsoever.

Hi all, The metal casing connecting the shower head to the tap has come away. The rubber tubing is still in perfect condition,  with no leaks. What sort of product could I use to rejoin the two pieces of metal? I've included a (lowres) picture to clarify things a bit. Many thnaks in advance!  Jason

Hello all i am looking to replace old bicycle head lights with led(there are three) and have then wired to three different toggle switches one for each led an a master switch that can turn off the entire circuit and i want to mount it on the bike with the power source  Thanks alot. Zupyo22

I recently finished building a RepRap Huxley, and shot a time-lapse video of this print. You can see the video here. (I would embed it if I could)

I have just bought a rubiks cube and i can solve ONE side but that is it. i have looked at ibles telling you how to solve it but i find it very confusing. i feel like i am going to burn this cube. so, does anyone of any site that EASILY explains how to do it. i am a noob at this.

     Well, I don't have a mental problem or anything, but it often gets weird and I just can't help but to ask. I'll recount several months before, around March or May last year. I was practicing Morse code, practicing with visuals, practicing with audios. After a few weeks of practice, I started hearing Morse code in my head, as in out of nowhere I literally hear it (completely random, it's not spelling out anything last I checked). I asked around about it (deleted the question though) and someone mentioned it's not normal/it's rare. Then fast forward into around November or December, I keep hearing that Morse encoded "SMS" ring-tone from a phone (it's quite popular here, heard it more than a thousand times). I kept searching for that cellular phone, but to no avail. I covered my ears with pillows, and I still kept hearing it. I then concluded that it was in my head. The end result was I couldn't fall asleep for 3 hours lying down on the bed. It's something like LSS (Last Song Syndrome, search it up if you don't know it) to the extremes (to the point that it resonates in your head and you can hear it as an audible tone not from your thoughts). Any thoughts as what may have been causing this?

Hi people, i need to make a miss piggy head, not a mask a whole head.Has any one got any ideas? I only have 2 days to make it. It is for a dance concert. Thank you all....Amelia

I want to make a life size head or skull which folds flat for transporting but is 3-d for displaying goggles, helmet etc at steampunk show and tells. Any ideas? Has anyone ever tried to make home made inflatables ? If so, what materials and how to make the seams?

Hi, I want to make some apparatus that will allow me to film first person. I have lots of spare PVC pipe and I have a tiny camera that I will record from. NM

Shado profile person cameo

The new sticky-heading takes up too much screen.  I would rather it be much smaller or not there at all. Thanks for your time, Ted

have to replace both head gaskets on wifes car. cannot find any info or factory manuals any where. any and all info needed thanks

have to replace both head gaskets on wifes car. cannot find any info or factory manuals any where. any and all info needed thanks

I have these old but in great shape head phones but the foam is kind of wearing out. I was wondering does any one has an idea as to what to use to replace those foam covers for headphones? Since those foam replacement covers are no where to be found here. Thanks.

Hey,I'm looking to build a HUD (Heads Up Display) for my Arduino project. I was wondering if you could advice me some parts that I should use. For the reflection I'm looking to use black coated plexiglass. I'm wondering if I would need a mirror in order to reflect and enlarge the reflection on the plexiglass. Is there anyone who could advice me some parts? Regards,Jim

In step number 2, is the cardboard still completely round, or has it been shaped and squared off in the back?

I'm wanting to build a heat sink for my head/pillow at night. The reason? My head frequently gets too hot at night giving me bad dreams, headaches, and sometimes keeping me up for hours. What I've come up with is steel or copper BBs contained in a thin plastic bag to prevent corrosion and enclosed in fabric for comfort and durability. Does anyone have a better idea, especially for the heat sink (metal) part?

Ever wonder how your brain sits in your head? How it would look sliced up or from different perspectives. MRI currently allows you to do that, but these crazy Sweedish/Hungarian let everyone interact with brains, not just doctors. Using MRI data and some headtracking they made some interesting visualizations check it out:Brain Mirror

Im having issues with my radio it has bad static.. finally sick of it i started to test.. tested resistance on antenna on the ground to the unit.. looked good. turned it on and tested for 12 v on red and yellow wires they were good i happened to put it on the ground with the car on and i get 10 v on the ground i also get 10 v on the head unit case.  when i unplug it everything goes back to normal.. cannot figure this out and any help would be great.

So I saw this on Amazon, so I decided to start it here. One word or short(One sentence or less) phrases, please, and you may not post another time until someone else adds to yours. The word is(what a surprise)---- K'Nex Have fun!!!

Hi, i am a sophomore in a small town in eastern Oregon. I need help, a lot of it, in building (from scraps or anything found) the simplest circuit possible to connect a non-webcam camera to an lcd screen from an old cell phone. I have little experience and i know i shouldnt start with this, but dont give me crap for it. I can learn to do things easily but need to build two circuits like this for a helmet i am building. If you people could get me direct help or if there is an engineer floating around i need help. I am planning on becoming an electrical engineer and want to start here. Please either help or point me through the right doors. Thanks. P.S. my budget is kinda low but i can pull it through and ask favors.

Hi all,I'm in need of help. Due to my previous jobs and general knowledge a friend has asked me if I could build an automatic pH regulation system that will monitor and maintain two tanks (it sounded easy to me at the time) but I've suddenly found myself out of my depth.Having spent long evenings searching on the web and on here, I've seen a few builds of monitors and a couple of dosing systems but none are just what is wanted as they are only set up for single tanks, or not combined into an auto-doser, or too "over-tech'd" or multi-purpose orientated and I don't have the knowledge to adapt or alter things to my requirements. Plunging straight in at the deep end with no real idea of what I'm doing and can actually be done, I'm thinking I should be able to (theoretically) assemble and program an Arduino controlled system, with the one box doing the job of monitoring and regulating both tanks independently, so two sensors, pumps etc., from what I gather it's by adding different boards to the base unit (I did say I know nothing). I don't need wifi or anything like that, just a simple device with a basic display showing the current values that will sit there and just do the job.I think I have the capability to actually build and program the thing having a background in electrics and a little knowledge of relay control systems - not electronics, I start getting lost just after the transistor/diode level and BASIC is more my programming level (yes, I may be THAT old, but I'm still trying to learn), and so what would really help me is if anyone out there can point me towards a site or pages where I can find the info I need, hopefully that doesn't assume years of prior experience, to either build or adapt something to what I want, or even aim me towards someone who could be able to supply me a design and components list, either for fee or free. Cheers!

silly question but i really want to be head girl and i have already had an interview im just waiting for the teachers and those in charge to make a decision lol

We bought a styrofoam head from sallys beauty supply,airdry clay from micheals,and i put 1 coat over it next day it cracked off! i went thicker...still cracking...what do i do? its due in 3 days!

I have this deer head table top ceramic bust that I want to hang on the wall. Any thoughts, ideas, products that could help me transform this to a wall hanging? I would like it to hang like the the rhino. Thanks

I have this headphones and one side is bigger than the other dose any one no why

I did.As of September, the Headteacher has asked me to be Acting Head of Year 7. I'll be responsible for the day-to-day welfare and behaviour of 160 children.This is right out of the blue.I'm excited.I'm terrified.I'm management!Unfortunately, that means more work, so less time Making, less time online. You won't notice until September, but I'll apologise in advance.WowEDITI've already found myself doing stuff - organising a week of activities for 300 kids, and I get to order senior management around...I think I may enjoy this...

I have seen videos on Youtube & Instructables about make a Spear/Arrow head stronger, i was wodering if this is due to tempering (Ex. Steel Heating, cooling rapidly for stronger atomic bond) or due to some other method of strengthing I do not know about ( I only know the Steel method due to mass History/Science channel fanatical-ness) Plase help me uderstand this.

hi I would like to make a filling head "overflow filling head" I already try to make a prototype in pvc but I encountered problem with seal thank you

The EyeSeeCam is a head-mounted device developed at the University of Munich Hospital that uses four cameras to record what your eyes are looking at. Two cameras are used to track your eyes, one records what your head is pointed at, and the last one uses the data from the first two cameras to record where they're looking. The creators list some nice uses for this, but I keep thinking that this would be great for a first-person shooter. Or maybe something more altruistic like an interface for those with ALS that the EyeWriter was designed for. EyeSeeCam via Hack a Day Reading a book with EyeSeeCam Part 1 from Johannes Vockeroth on Vimeo.