My laptop's (lenovo c100) both hinges (metallic) are broken one by one. i am using it by placing something behind the display. Any alternative?
Question by gopalkalna
Hey y'all, gotta question: I have a plastic human skull and I want to make it into a jewelry box/something creepy. But anyway, the top half of the skull came off easy and I put a small hinge at the back of the skull... now my problem. I want to have something that will keep the top open until I'm ready to close it... thoughts? Any and all help will be greatly appreciated be safe be inspired
Topic by gothking85 | last reply
Hey all. First time poster here (second attempt, since Instructables stopped responding the first time) so hopefully I am posting in the appropriate place. I have in mind a leather-book-style cover for my tablet that I'm very excited to work on. However, I would like to use friction or torque hinges to position the cover at any angle from the spine in a 180 degree radius and have it stay there, similar to the screen of a laptop rotating around the hinge. I've included a picture that shows the basic design that I'm aiming for, though the hinge itself doesn't need to be ornate. Unfortunately, I don't really know where to find such a thing. I've looked on various furniture hardware sites and taken a trip to the local hardware/home improvement stores, but I haven't found anything that matches what I'm looking for. Common small brass butt hinges would be ideal if they had friction/torque properties to them, but I can't seem to find anything like that. I've never looked for specific hinges before though, so for all I know they've been right in front of my and I didn't realize what they were. Does anyone know where I can find such hinges, or can someone offer up an alternative solution? Perhaps there is a way to add friction to simple hinges bought from a hardware store. Thanks in advance for pointers/advice.
Topic by wireframewolf | last reply
My wife and I bought an 80s designed house that's not that well designed. We keep one of the litter boxes for our cats in the garage, which is accessed from the inside through the laundry room; and we want to install cat doors so our aging felines can pass through the doors easily to get to it, while keeping the draft from the garage out of the family room. The interior door (between family and laundry rooms) is a standard hollow core and the exterior door (between laundry and garage) is fire code rated solid wood door. We tried a standard top-hinged door with the cats already, at our old apartment, and the cats didn't take to it, so we we're hoping to do french doors, since they know how to get through normal doors pretty well. But we're kinda stuck on our lack of knowledge about hinge designs; we need hinges that swing both ways. Has anyone out there successfully completed such a design/installation and would be willing to share pics and secrets?
Topic by sirenwerks | last reply
Ok, I'm building a motorized projector screen, almost exactly like this: http://www.youtube.com/watch?v=GgIqx-iKNcw , except on a much larger scale. The actual screen will be made out of blackout cloth (what the back of curtains are made out of), and the screens construction will be similar to this: https://www.instructables.com/id/Cheap-DIY-100quot-Projector-Screen/ . The screen's size will be somewhere around 20x20 (feet), because it will be used in a fairly large auditorium. The screen will hinge up and reside (when not in use) above the stage. The top of the screen will have some hinges attached, so the screen can "fold up" into the ceiling. Toward the bottom, on the back of the screen, there will be a steel cable attached to the frame. This steel cable will be fed into an electric winch, which will be mounted on the ceiling. So, when the electric winch is activated, the screen will either hinge out, or it will hinge up into the ceiling. I know its hard to understand, I've done all the explaining I can. Ask questions if you have to. Anyway, the problem is this: What if this steel cable broke/got frayed and snapped/got chewed up by a darn rat, etc? The projector screen would come hurtling forward, knocking out anyone in its way. So, I need something that limits the speed that the screen can be lowered. I need some kind of hinge that limits how fast the screen can be lowered, so if the cable does snap among other things, the projector screen will make a graceful descent and people will have enough time to get the hell off the stage. Now, Do I think the steel cable is going to snap? Hell no. In fact, the steel cable I'm planning on using will handle over 1000 lbs. The total weight of the projector screen? Maybe 70 Pounds, at the most. These speed limiting hinges are just for that "extra" step of safety. So, does anyone have any suggestions?
Question by tyler9613 | last reply
I’m working on a project, part of which connects two door-type panels to each other using hinges. The weight of the panels—even together—likely don’t add up to 176 lb, but I’m using double-acting hinges, the models of which are available only as follows: a) 2 pk of 6 in. hinges (total weight up to 176 lb) b) 4 pk of 4 in. hinges (total weight up to 176 lb) What are the benefits and downsides to using more [smaller] vs. fewer [larger] hinges? What would you recommend, AND WHY? Please only reply if you have a reason/backing for your opinion; I’m looking for facts and legitimate reasoning, not merely personal preferences. Thanks!!
Question by macgyverunigrad | last reply
Well, that's my question. I would like to know because I see people make mag's with he hinges on the out side and the ball'n'socket joints on the inside of the sides of the mag, and It is useful info anyhow. Look a the pic...if they are the same length, how did Senior Waffleman make that mag?
Question by The Red Book of Westmarch | last reply
I'm working on converting a panel van into a perfect, optimal full-time living space. It needs a permanent bed which I want to make use of the otherwise wasted cab area (since I won't be driving and sleeping at the same time). When driving, I want it flat against the ceiling and to sleep I want it to fold down between the dash and the back of the seats - a cutout for the top if the steering wheel is fine.This involves moving it through a very specific path through space with a mechanism along the same lines as the folding rotation of a sofa bed. I would like to know what joints are available so that I can figure out the correct combination for the required movement but I can't even find the names of them. "Complex hinges" doesn't seem to bring up anything useful. Any suggestions?Thanks,Mike.
Question by ImmortalSoFar | last reply
On the second step he sais you need hinges in misc, but i dont know what piece hes talking about. please, please, please help
Question by the poodleo | last reply
Yesterday i ordered some KNEX online and i saw a green half of a hinge and a black half. I ordered the black one because the green was out of stock. I never see green hinges on instructables so i am wondering if there is a difference.
Question by NYPA | last reply
I've got a candy tin that comes as two separate pieces (top and bottom) and I'd like to add hinges to it kind of like how altoids tins have them. What would be the best way to go about it? I used altoids as an example but any hinge that's small enough to fit on the tin and joins the two pieces will get the job done. My tin's dimensions are: 4.6875" x 2". The bottom piece has a narrow part on the top that allows the top piece to fit onto it, those measurements are:4.5625" x 1.875". This narrow part reaches1/4th of an inch into the height of the bottom piece and has 4 bumps sticking out of it (2 on both of the long sides) to keep the top in place similar to what's on altoids tins.
Question by Elixiate | last reply
I'm building an articulated 'puppet' using 3mm acrylic sheet for the 'skeleton' My hinges will be simple sandwiches of two outer and one inner piece, held together with a snap-together nylon rivet. The flat contact area is about half a square inch (see attached image). The 'puppet' will be controlled by tendons attached to gloves, so will only have the force of single fingers to move them. I need to know how smooth a joint this will be, before I start ordering nylon washers. Anyone got experience of this sort of join? Will it be ok dry, or will a small amount of lubrication help? (petroleum jelly? liquid silcone?). Or do I need to commit to washers. Needs to be as frictionless as possible!
Topic by Crispy75 | last reply
I have 2 pieces of aluminum that make up a kind of finger hinge. The two sections are each 3/4" wide pipe each ending in finger joints with a hole drilled through the fingers. A cotter pin has been used as the hinge pin during the mock up, but now a permanent hinge pin is required and due to space regulations it must be very flush and end on either side with a flat round, similar to a nails head (striking surface). I was going to merely insert a nail, then put a tightly fitting washer over the other end, and briefly mig weld the end of the nail protruding through the washer too the washer. The opposite end will have a small thin piece of cardboard as a temporary spacer to ensure a snug but not too tight of fit. Of course the rest of the aluminum will be shielded from weld spatter. The weld would then be ground flush. There will not be a lot of tension put on this weld, but some minor vibration. There will 5 of these pipe section with 3 joints per section each, they will be very close together and require the ability to move independently from each other, so no shared pins. Will a very brief weld cause the pin/nail to heat up to a point that it causes the surrounding aluminum to melt and "horribly" cause the 2 joints to fuse? The 3/4 span is much to wide for a pop rivet and would have to much of a bump on the sides. Bolt and nut would also have to much of a bump, and introduces the destructive effects of a steel thread running through an aluminum body. Philadelphia screws are just too wide for this application Actually peening a real rivet will put to much stress on the aluminum pieces. No I do not have the means to weld aluminum, as this is a solder core wire feed welder, not a true mig. Any suggestions? I have done similar welds before, but all pieces were steel, not mixed.
Question by iminthebathroom | last reply
Im trying to make a metal box that can open on hinges. I'm on a budget, and i dont even know where to start. my plans are (LxWxH) 14"x14"x8". i want to have it open with hinges in the back, with the lid half 3.5 in. thick and the base half 4.5 in. thick. I have some means of welding and soldering. it doenst need to be sturdy, just for display. i also perfer that the metal being used is malleable so i can give it a curvy bowed look. list for me materials, prices, and instructions. thank you SO VERY MUCH. Chris
Question by gonzoman73 | last reply
I want to add a tray with a lip on it to a kid's mobility scooter so that he can get his own lunch from teh cafeteria. Also needs to fold down to be out of the way after lunch. Any geniuses out there willing to help come up with a design? Thanks!
Question by melintx | last reply
Hinges for floor door/ trap door Is there a hidden hinge that lifts a flush floor door? As the door will be heavy, I'll use a gas piston to aid lifting and closing. I like the system used in http://kims-kitchen-remodel.blogspot.com/2009/01/basement-hatch.html but the hinges are visible. Thanks for looking!!! Miguel?
Question by greenroofer | last reply
My lenovo Y510 laptop's right hand side hinge breaked.................... how to fix it........is it fair that i open the case and try to fix it........................my service provider asks RS5000(1$=45RS) for fixing it............what shoud i do now???????????
Question by rachit59 | last reply
I have a silver original DS fat and the right hinge (looking at it from a playing view) originally broke but I could deal with the odd angle. Now, the left hinge broke as well and the screen has the capability to completely twist around (see pic). The system turns on and the top screen still has power but it remains blank (see pic). If you have any idea on how to fix this and also a place to purchase a shell, which I am guessing it would require, that'd be great. Thank you!
Question by johnsmarts | last reply
So i want to make a coffee table/beer pong table. like this http://media.pongalong.com/images/bestbeerpongtables/BudLightBeerPongTable.jpg So it is going to be 3' x 8' and i want to have 2 sets of legs underneath of it. A short set for the coffee table and another set that are taller to use it as a beer pong table, or just a regular table for that matter. So my main question is where can i find locking hinges for the Table legs? I have found some, but don't seem to be very heavy duty. I want them to be able to lock the legs in the horizontal position to hide them under the table while the other legs are locked in the vertical position. Also does anybody have any suggestions for cheap fiberglass or resin to coat the bottle caps. Didn't realize how expensive the stuff is. Cheaper is better.
Topic by HICKFARM | last reply
I'm building a desk with drawers. i want the drawers to be electronically motorized to open and shut, but can also be open manually with out messing up the motor. Any ideas, i have a good one with pully and cables system but it takes up to much room, i want motorized sliders, anyone with ideas how to build one? i can buy and build this in my college, sky the limit as long as its effective and cheap. yes i will have them hooked to circuit boads... Also need the drawers to lock.... and idea's for hinges that will open and shut electronically. throw ideas, anything helps? - yes i have the pully system idea's - i'm trying to build motorized sliders - motorized hinges i have a shop boat cutting everything and pre drilling all holes. and i can inlay room in th3 side wall *not much only a 1/4" into the wall. Pictures help, even if you draw it, just make it clear so i can understand and explain with it. Thanks..
Question by jschirm24 | last reply
I'm looking for a very specific hinge. I want it to match this photo as closely as possible. I've found some that look like an almost perfect match but the requirement to buy is 1000 pieces. Does anyone know the name or type of this hinge so I can locate it and buy just a few of them? The link shows the hinge type I'm looking for. https://www.alibaba.com/product-detail/-TANJA-K42-Regular-hinge-step_60386053644.html?spm=a2700.7724857.29.46.ZqokfO This photo shows the hinge I'm trying to replicate.
Question by gravityisweak | last reply
I can not close the lid of the laptop because the left hinge has seperated from the plastic that frames the viewing screen and back of the lid. Is there a video or illustrated description of how to repair the broken hinge? I was told that the design placed a heat dissipator device too close to the left hinge and the heat caused the plastic to fail. Is this true?
I restored an old wine barrel and will use it as a kitchen island. I cut a door out of it, but am now stuck on what hinges to buy for it. does anyone have any suggestions on what hinges, and how to mount? The best I can think of right now is to mount inside hinges that flex out allowing clearance for the doors edge. But that seems bulky. Keep in mind that the barrel is rounded and so just straight mounting two simple cabinet hinges won't allow for the curvature and clearance. Any tips is really appreciated! Thanks!
Question by stunami | last reply
Crack hinge and loose ds
How do you adjust hinges on modern cupboards so that the door closes firmly?
If the hinges show then it won't be hard for a thief to figure out that it's a safe.
Question by BIVS2000 | last reply
Question by spiderdh | last reply
I am building an outdoor movie screen based on the following pictures but I would like the screen to be able to fold back and rest on the back supports to minimize wind resistance or blowing over. my idea is to build them in two parts screen and base and attach them with some kind of hinge system. but i know nothing about hinges so i need help or if you have another idea tell me thanks http://img683.imageshack.us/i/indexphpactiondlattachtz.jpg/ http://img546.imageshack.us/i/indexphpactiondlattacht.jpg/ http://img641.imageshack.us/i/indexphpactiondlattachtf.jpg/ http://img692.imageshack.us/i/indexphpactiondlattachtg.jpg/
Question by gamer43 | last reply
I am trying to make a desk out of a hollow core door. I want to fill in the hinge areas before painting or put something there after painting to make them look nice. any ideas? I haven't found any online and I've spent hours looking.
Topic by BrookeF | last reply
I have been looking for leather notepad case with spring close hinge. Has anyone seen such and animal or know of a small hinge that could be modded on to a leather notepad case/folder? I had thought these were called snap-cases but can't find anything like what I am describing above. The memory I have of my Grandfather's was a spring loaded piano hinge on a leather folder/case for letter size pad. I would like to find one for a small notepad. The main point is that it should automatically close. NOT automatically open. Thanks!
Question by Darth Sensate
Hello. I have a laptop that's several years old. During its service, the lid has cracked near the hinges. The hinges themselves are intact, but the bottom of the lid is almost completely cracked along the length. The question is: how would I fix it, without causing permanent damage, cheaply and make it last at least 2 years? I can work with wood, but not metal (no equipment for that). I'm on tight budget so I cannot afford to spend more than 10 GBP. I'm located in London. Does anyone have any suggestions?
Question by xc1024 | last reply
Http://www.shopbluehouse.com/index.asp?PageAction=VIEWPROD&ProdID;=2053&HS;=1I'm not all that familiar with furniture design, but I'd like to make something like this folding chair. Anybody have an idea what the hinge might be made of or look like?
Topic by royalestel | last reply
Well, its an original DS.. thats pretty much it i guess.
Question by Obito | last reply
I am going to update this in about another day. To all the people out there, and there are literally millions, I have the very best fix for broken hinges on a lap top. My lap top is an HP Pavilion zv6000, but I understand this is very similar to many other models or makes. I have read many frustrating concerns about this INFERIOR hinge design and I agree the manufacturers should foot the bill to repair them. Of course they wont because it would cost them millions of dollars. I just wanted to let everyone know I will submit a full text explanation and some good pictures. The method requires the normal care as you are handling delicate electronics. The time to do the repair is no longer than 24 hours and most of this is to let things setup. The cost for me was $9 and if you do not have the little extras, I know it would never cost more than about $20. The thing I like about this repair, which I painstakingly studied, is that it preserves all of the components, you do not loose the screen or damage anything. I would even suggest you do this fix even if your hinges are good because it will prevent them from ever breaking. I promise you. So please stand by for the update. I am new at posting on the Internet and I would love the news to get out to all who need it. Cheers for now Andy (Delta, BC, Canada)
Topic by my_buddy | last reply
I'm trying to turn this old text book into the Book of the Vishanti from Doctor Strange, which features a somewhat intricate pattern of metal design work on the front and spine, as well as some hinges. I was thinking that, for the metal, I would use some thermoplastic, but I still don't quite know about the hinges. Would thermoplastic work? Should I use real hinges or just fake them somehow? How could I work around the spine and still keep it flexible?
Question by Numbuh1Nerd | last reply
What are some good primary weapons, side arms, and grenades that use few special pieces? I know there are many guns that I want to build, but I have to stop in the middle and I realize I waste over an hour (or more) building a gun I can't finish or use. Almost always it is for the same reason...I don't have many special pieces. By special pieces I mean: Y-connectors, Hinges, Bendy Rods, Ball Sockets, etc. I only have 6 Y-connectors, and thats the most amount of special pieces I own. I really would like it if some people could post links to guns that I could build over spring break. When you post it, could you please tell me these things (if you can that is!): The name of the gun, whether it is a pistol, rifle, sniper, grenade, etc, If it has any special pieces (It can have 6 Y-connectors at the most I don't have any other specials), what you would rate it on a scale of 1-10, or anything else you want to include to help me decide which one to build. Again any help or guns would be greatly appreciated, and would help a beginner k'nex gunner get more building experience!
Topic by tron1o7 | last reply
My front door has come off it's hinges and out of the wall.Should I use dowel and then redrill it or is there a better way?
Question by affiliatepounce | last reply
Question by SpeedStrikerXLR | last reply
~~Im taking my ibook apart because the fan is just about pooched, and then I can put an external fan on the heatsink and disconnect the old internal one (the bearings are seized). I've seen it done on other laptops but I can't find anything on google about installing the hinge on an ibook in reverse so the the main part of it with the keyboard can fold up behind it.~~ ~~Is this at all possible???? Oh yeah and its a ibook g4, not a clamshell~~ Well guys, I've made it possible, the wires reach perfectly, and all I need to do now is enclose my ibook in a heavy duty metal case and install a touch screen thingy over top of the lcd (I don't want to replace the whole lcd). This is awesome guys, why isn't anyone commenting?
Topic by Punkguyta | last reply
Oppps i kinda let my ds fall and my touchscreen and hinge snapped its da hindge withthe little charging lights on it i bought a new ds i instead sooo whoooooo
Question by trebornerdnoc | last reply
I'm looking for a good knex gun to build but I have no hinges and no balljoint connectors and I don't have a whole lot of pieces but I could still build something, but what's worth building?
Question by slywolf28 | last reply
I still use my beloved Sony Walkman (personal cd player ca. early-mid 2000s) with a cassette adapter in my 98 lumina, as well as w/ headphones on long family car trips. Sadly, this past weekend, I dropped it on hardfloor, and while it is otherwise unharmed, the lid and hinge-springs popped off. I was able to remount either just the springs or the lids, but not together. The lid will stay on and allow me to play, but I have to hold it open manually, which is going to be problematic later trying to keep it open to change CDs if driving alone. I know I should probably look at investing in an mp3 player instead, but I want to keep using my otherwise perfectly-good music player. Any suggestions for fixing the spring/hinge setup? Has anyone else ever had this happen?
Question by StoryAddict | last reply
I have a unibody macbook which I have recently broken and would be grateful for your help/advice. I dropped my macbook on the floor. As a result a piece of metal (I think it is aluminium but this is a guess) snapped off the screen (internally). This piece of metal was the piece that the hinge screwed into, connecting the screen and the keyboard and allowed the laptop to close. I have attempted to glue this piece back on with various strong adhesives but these have not been strong enough due to it being hinge. I am writing to ask if you think that a form of welding may be a possible solution. The piece is 1.75cm in length and about 3mm across. As you can see from the photos there are three holes which will hold the screws securing the hinge to the computer's base. The piece is attached to the laptop's screen. I have attached two professional photos which I hope show how the piece fits into the overall mechanism. Your input would be most appreciated.
Topic by apa261 | last reply
Question by SuBob | last reply