Search for intercept in Topics


intercepting text messages?

How do you do this without physical control of the target phone

Question by timwwood    |  last reply


Intercept traffic camera signals

I know a guy who knows a guy (I know, cliche) who was able to combine a cantenna, a lunchbox, and a small monitor, (and some other stuff) and when they stopped at a red light, MacGyver was able to display the image from the camera on the screen. Basically, they were looking at themselves from the point of view of the traffic camera. So, my question is, how easy would this be to do? I'm guessing the right software on a *laptop with a wifi card would suffice. What does everyone else think? *Edited

Topic by NozeDive    |  last reply


how to "ROOT" samsung intercept for sprint Answered

1)     how do i "ROOT" my samsung intercept from sprint? i found a few apps that are amazing     ("wifi tethering", "set CPU", "root explorer" "root manager"), but  i need superuser (root)     access. can anyone explain what "ROOT" is and how to get it?     (update) I'm starting to understand "ROOT" is.) 2)      and what is  "KERNAL" 3)      i want to install flash player 10.1 on my intercept from sprint, but after i installed, it was the      same. do i have to root my phone? 4)     i cant find any good info on HOW to root the SPRINT INTERCEPT phone. 5)     which is better, the samsung moment, or the samsung intercept? 6)     is this the ONLY phone the SUCKS in EVERY SENSE (bad screen re;  unable to root;  no     multi-touch; android 2.1;  no flash support;  non-sensitive capacitive buttons;       unresponsive;  slow) 7)     (update), my phone updated today and now is running 2.2, froyo. now the capacitive      buttons work the way there supposed too. but i still cant i update flash.  and is rooting      gonna be possible (or at lest possible)? (re update 2011 Jan. 11) my phone still has no multi-touch (except for the "pinch to zoom" like before.but only on the browser); no flash player; and the hardware still SUCKS (bad res LCD screen, "EV-rev O" radio, ABSOLUTELY TERRIBLE built in memory) some reason this phone after the 2.2 update, is a LOT slower and more unresponsive then before. 8) does anyone know how to root this phone and flash it with some better-suited software for this model phone (m910)

Question by -max-    |  last reply


is it possible to root my sam-sung intercept (sprint) with the froyo update? and what about flash player? [answered]

Is it possible to root my samsung intercept (sprint) with the froyo update? what really pisses me off about this phone is that it has NO flash player at all. ive tried installing it from the adobe website, Googleing "flash plater 10 for 2.1", and looked throughout the market. its not there (i thought it is there for 2.2 froyo but NOOOO this phone has to be horrible). also moved the app from "downloads" to "tunnybrowser> app_plugins" nothing works any suggestions? can anyone offer me some simple rooting and flashing this phone? also, will writing a sudo command in the "ROOT" folder work? it seems like i can. using this phone it so far seems i can "create" a folder in the ROOT folder. will this work or will it brick my phone? using some apps from the market, i discovered my phones CPU does not go higher than 199MHz. this REALLY UNPLEASANTLY PISSED ME OFF. NO WONDER WHY MY PHONE IS SO DAMN SLOW! how do i increase it to the 800MHz it was rated for? and what would happen if i tried to over-clock it to 1 ghz?

Question by -max-    |  last reply


questions about flashing my sprint intercept with custom rom

      I would like to flash a custom ROM to my rooted intercept to get a more stable, higher tech android system however i have concerns.       will a custom ROM look zoomed in? i don't think so, i saw custom android builds working perfectly. but i still want to be sure!       Can i get a custom ROM that i can move most of the system files to the SD card? (i only have 160MB of internal storage, i cant install many apps. i would like a ability to move an entire app to SD. not 30% of it. also, the ability to move virtually all my apps to SD. i can only move half of them.)      WILL I LOSE SPRINT SERVICE? (im not talking about bloatware, like the real usability of the phone ex: calling, texting, 3G networking)      what is flashing a custom kernel? how?      what are custom jits?      what is SD partitioning, what does it do? is it similar to partitioning a hard drive on a computer?             please take a look down at my answers/comments for more unanswered Questions and concerns and keep updated on this question; i will add more questions. thank you in advance, -- max

Question by -max-    |  last reply


Has anyone tried to use raspberry pi to keep out robo callers

Has anyone tried to set up a raspberry pi to intercept robot callers but let live people through?

Topic by Bard    |  last reply


can you help with homework?

Im in algebra 1 and need help on a word problem The scenario is a cinama sells 532 buckets of popcorn for 1489.50. A large bucket sells for 2.25 and a jumbo sells for 3.75. Questios: 1.write an equation to model the situation (slope intercept or something) 2.how many jumbo buckets were sold?

Topic by fretmelter    |  last reply


how do you pick up the signal from the chest strap of an un-coded heart rate monitor?

I've got a Polar heart rate monitor, which includes a chest strap and a watch. The strap sends out an RF pulse for each heartbeat it detects. These pulses then get counted and then displayed by the watch on your wrist. I would like to be able to intercept this RF pulse and do my own thing with it. My initial idea is a treadmill-mounted device that displays the current heart rate and at least some sort of min/max display, indicating when you are in the ideal HR zone. I think I know how to build the device, but the first step of intercepting the pulses has got me stumped. Anybody know the specifications of the strap and how to get the signal? Thanks!

Question by dmeierhofer    |  last reply


How to build a programmable remote control for TV? Answered

Want to build a hidden remote control for TV in my living room.  Have some ideas on hardware part but still don't have clear understanding of how to intercept signal from original RC and simulate/reproduce it on my device. Does anyone have experience with such things?

Question by temikzaets    |  last reply


Cosine graph manipulation help.

I am starting a electric vehicle project and have a math question which is relevant. This may not be the best place to ask this question but here we go anyway. Is there anyway to manipulate a Cosine graph so that the max and min points are the same and the period is the same while the x-intercept is different? (When compared to y = Cos x)

Question by NoNameCola    |  last reply


Government Trojans !!!

What do you all think of this practice ? Coming soon to a pc near you....government trojans.A government Trojan is spyware installed on a computer or network by a law enforcement agency for the purpose of capturing information relevant to a criminal investigation. Depending on the program, government Trojan horses may intercept email or VoIP traffic, scan hard drives for relevant digital media or even record conversations and videoconferences. As this type of software captures data and then sends it back to a central server for processing and analysis without a user's knowledge, it is generally classified as a back door Trojan horse virus. Governments have approached implementing Trojan horses in different ways. Swiss government agencies have been reported to be working with Internet service providers (ISPs) to record speech on an infected PC's microphone, as opposed to of intercepting encrypted voice packets. German agencies have sought authority to plant Trojan horses on the hard drives of suspected criminals using email that would install keyloggers, record webcams and microphones and scan infected hard drives for for documents, diagrams and photography. These email messages would be tailored to each unique target, similar to the method used in spear phishing attacks.More about Government Trojans.

Topic by Goodhart    |  last reply


Calculator Programs for Math

I've been working on some programs for my calculator recently and have decided to share them. I made these myself from scratch. If you want to modify go ahead just credit me. Don't sell them. And don't use them in math class if your teacher says not to. The programs are a follows: a quadratic formula solver, parabola solver, slope of a linear equation finder, and y-intercept finder. The programs work on TI-83's and TI-84's. If you have questions on how to use them or how to put them on your calculator please leave a comment!

Topic by sardines454    |  last reply


Household Hacker

There's a man on Youtube who is trying to convince everyone that you can do some ridiculous technological feats. His username is Household Hacker, and he has nearly 3 million views on just one video.*run a TV off of a AAA battery, *intercept cell phone calls with a universal remote*charge an ipod using only an onion and gatorade*make a hi-fi speaker out of a penny, a paper plate, and a sheet of tinfoil Although many of us realize that this is fake, a lot of people think it's true. http://www.householdhacker.com/I'm sure some of you will find it funny, while others won't. I'm still trying to figure out which side I'm on with this.

Topic by Fenwick    |  last reply


Reading a 16x2 LCD screen

Dear Techfreaks, I have a rather technical question for you guys. I have a big, company-suited coffee machine which I'd like to mod, to be internet connected. My idea is to read the LCD screen of the machine, by intercepting the wires, and interpreting the signals with a microcontroller. I'd need to read the data, and convert it into ASCII, so I can drop them on a website, and in fact have a (sort of live) view of the LCD.  The used LCD is a standard 16x2, 16-pin LCD. Does anyone have any experience with doing this? Or any tips? I couldn't find a project online which wanted to do the same thing as I did. Thanks in Advance, Willem. 

Topic by WillemB14    |  last reply


How to measure length of an object approx 10cm long within +-1mm by non-contact method, e.g modded flatbed scanner?

Objects are slender and about 5-10cm long. If it helps they can always be mounted in same orientation by placing them in a long V shaped horizontal groove for example. I currently am using a laser beam mounted in moving carriage of a hacked inkjet printer. When beam is broken carriage stops and stepper motor steps are counted. However this method is ugly and slow. Something like a glass surface I can place the objects on (such as base of a hacked flatbed scanner) would be much better and wipe-clean. By lining object up in same direction each time, only one row of pixels would need to be read for example looking for a sudden change of contrast. Cannot find any way to easily intercept output of a scanner on the web however, especially a more manageable single pixel as it scans across the length of the scanner. Alternative might be photographic, for example camera mounted under the glass surface, or even a moving camera to eliminate parallax error. Any suggestions gratefully received no matter how crazy. Thanks in advance, John

Question by XenonJohn    |  last reply


How can i have my home alarm system email me system status?

I have a concord 4 home alarm system from GE. It currently supports the following communication methods to report status. 1. GSM by means of a $250 module to connect to alarm.com 2. Outbound dialing to a pager # which will send codes which you need to look up to see what they mean. 3. Central monitoring station service which it will dial and send system status to. I've seen modules such as the Telguard TG-1 which will intercept the outbound dialing and convert the pager tones and transmit them over GSM to a central station as well. What i'd like to do is one of the following. I'd like to get the system status messages from my system, but I don't want to purchase the GSM feature or a pager as I already have a cell phone. I can add the enterprise paging feature from at&t; but I just feel there must be a DIY method for this. One option I've been considering is a phone line simulator component to basically have it connect to a server I have via a fake modem connection and use the GE Enterprise Downloader software to have the system upload/download from that using the phone line simulator. Beyond that, i'm not sure what options I have.. Would love some ideas.

Question by srberube    |  last reply


Programmers can you help me?

Programmer for an art project? I can give you an excellent opportunity to learn some things about insect detectors, and to challenge your creativity! I need a some help from a programmer/ technical person for my art project (immediately)- Short about the project: The Project is planned for the end exam exhibition at the Gerrit Rietveld Academie, June/ July 2008, but might also be shown at later occasions. The work is an installation with video projections, machines and live insects. A box is located on the top of a pedestal. The box contains crane flies, which will be seen through a small window. The crane fly's movements are intercepted by sensors which translates the movements to commands for a machine. The walls in the room are covered by video projections. By means of wires, the machine can move around in the whole room. Technically what I need is: Through an actometer (insect movement detector) the electric impulses created by the movement of the insects, can be viewed in a software on a computer. What i need to do is to use the graph of movements in the software to send output commands to a machine (made by me, controlled by Remote controlls). I am not sure of how this can be done in the best way possible, but I have some suggestions which I can explain more precisely later on. I am looking for someone who have knowledge in terms of programming, and could be able to come up with a good solution, as well as maybe collaborating/ helping me out with my project. Please let me know if you are interested, know someone or know where I should go to meet the right people here in amsterdam. All answers are appreciated! Thank you in advance Andrea

Topic by andamiranda    |  last reply


Programmers can you help me?

I can give you an excellent opportunity to learn some things about insect detectors, and to challenge your creativity! I need a some help from a programmer/ technical person for my art project (immediately)- Short about the project: The Project is planned for the end exam exhibition at the Gerrit Rietveld Academie, June/ July 2008, but might also be shown at later occasions. The work is an installation with video projections, machines and live insects. A box is located on the top of a pedestal. The box contains crane flies, which will be seen through a small window. The crane fly's movements are intercepted by sensors which translates the movements to commands for a machine. The walls in the room are covered by video projections. By means of wires, the machine can move around in the whole room. Technically what I need is: Through an actometer (insect movement detector) the electric impulses created by the movement of the insects, can be viewed in a software on a computer. What i need to do is to use the graph of movements in the software to send output commands to a machine (made by me, controlled by Remote controlls). I am not sure of how this can be done in the best way possible, but I have some suggestions which I can explain more precisely later on. I am looking for someone who have knowledge in terms of programming, and could be able to come up with a good solution, as well as maybe collaborating/ helping me out with my project. Please let me know if you are interested, know someone or know where I should go to meet the right people here in amsterdam. All answers are appreciated! Thank you in advance Andrea

Topic by andamiranda  


How to configure clients with WSUS? Answered

Hi!  I am working in a tech shop, and one of the things we do quite often is download and install windows updates on client computers.  The problem is that we are in a isolated area and have painfully slow internet.  I built a server with the idea of using WSUS to speed up the update process by having the clients download the updates from a local server.  I had done this in an AD environment before at another job that I had, but when I was planning this project for this job, I forgot that I had to use GP to deploy it the last time I did it, and A.  I don't want to be configuring GP on consumer computers, and B.  Most computers that we work on are Windows Home Edition, not Professional, so they don't even have GP.  Is there a way to configure my server to "intercept" requests to update.microsoft.com and just respond within our local network?  I tried pointing a DNS A record for update.microsoft.com to our local server, but for some reason it doesn't seem to work (is WSUS a different port or protocol than update.microsoft.com maybe?).  In addition, whenever I want to sync updates on the server with that DNS entry, I would have to delete the DNS entry temporarily, since WSUS services will use the DNS server on my local server no matter what (I have tried telling the server NIC to use 8.8.8.8 and 8.8.4.4 as it's DNS server, and also adding an entry to the hosts file to point it to update.microsoft.com on the server, but it always overrides and uses the DNS entry from my local server). Frankly, I'm not even sure that what I'm trying to do is possible.  If it isn't, my next idea was to create a script that our technicians and I can run on client computers to quickly switch the WSUS server settings to our local server and then when we are done switch them back to Microsoft.  But would that even work on Home edition computers, or just Professional editions? Thanks for your help!

Question by thegeekkid    |  last reply


The future of mobile operating system or the end for "hackers" and rooting?

For mayn years it was almost logical to get full root access on your new smartphone or tablet.The other fraction might now it as "jailbreaking"...No one really needs it unless they are not happy with they way the mnufacturer designed the operating system and features.The removal of bloat, apps the user never needs, is still the most common reason for rooting.Custom ROM's offering a different experience are right behind.Now we also have TV's, entertainment boxes of all kinds, even from our ISP's directly.The main provider for the operating system is now Google with only a few "competitors" left.Apple has a strong hold of the mobile and tablet sector too but is not really presented in other areas.Android is still open source but Google heavily modifed it to suit the needs of data collecting and security for features like banking, access control and so on.What is good for the normal user and perfect for those with security in mind can be really bad for those actually just using a device.No matter why you buy a new phone from your provider, you almost never buy it for the added apps and services.Rooting has become more and more difficult.One reason of course is constant security updates and removing possible access options for even simple things like getting USB debugging and an unlocked bootloader.People dedicated to find ways to remove provider locks, creating custom firmwares or the basic tools required to work with firmwares were called hackers.If you buy a new car and decide to modify it with a new engine, seats or whatever than no one will stop you.So why don't we have the same rights for our electronic companions?I wouldn't call it hacking, I would call it actually owning and controlling your device instead of Google letting control you - or Apple, but who cares....The other reason is dead simple: Those guys who started it all have retired or found employoment with those they fooled for so many years.Chainfire should ring a bell for anyone ever concerned with rooting.The master is gone now and only a few people are willing to take his legacy.For Asian devices the community over there is better off but for our market region right now Magisk seems to be the only option left for modern devices.The sneaky ways to lock us out....Security comes at a price, simple as.You can offer secrity for money transfers if the device is not trustworthy.Same for online streaming - you want the money for what you give and prevent that someone is able to make unwanted recordings without encryption.The list goes on with access control system and literally everything we use our devices for that involves some security.Even with the lates PIE systems Google's own devices are still quite friendly in terms of gaining root access.Different story though if a manufacturer makes full use of all the latest addition at Google's disposal.Device security no longer starts with the boot we see.It is now possible to create a hardware based tree of trust.This means any modification to anything will cause a failure.This locks out all "tools" able to read out partitions and vital data while a device is in fastboot mode.And of course said fastboot can be fully disabled as well now.For security reason a so called A/B configuration is used.Updates come over the air and are applied to the dormant system.Next start will boot the new system and then update the old one, no requirement to manually apply and update.The recovery can also be abandoned and replaced by a system using a copy on the device itself that is updated through OTA updates with the firmware.So both ways to gain official access can be full removed from the user.From there we get encryption, hash checks and literally everything working in its own user space - a full SELinux enviroment at the highest level.There are already devices utilising a lot of this and so far the only way to get any sort of insight was done by those intercepting OTA updates on a router level.And apart from quickly changing the encryption with the next updates nothing was gained.Is it all coincidence?Of course not.Well known leaks were kept open for years.Kernel updates gave improvements and closed really old leaks but never all known ways.With the retirement of the best rooting experts these holes were suddenly closed.Checks of latest kernel releases showed that there is no known vulenerabilities anymore that can be misused to gain access.And those finding new ones and making them available for us are bascally gone now.Encryptions and packing algorithms changed, same thing for the actual handling of partitions and rights.Anyone with a decent understanding of how the old ways worked will be able to figure it out with some time wasted on it.From there however the outcome is often dark.The tools needed to work with these new files are not always updated anymore.The developer simply moved on and most of the time without publishing his source codes.And the still best way to protect your firmware from tampering is to encrypt it.In the old days it was enough to sign a ZIP file with a release key not available to the public.Custom recoveries allowed us to get around this.This still works to some extent but now we also get additional checks starting from the bootloader.A modified system will be detected and stopped and a stock system will stop i a modified boot is detected.Even using a custom recovery by flashing or through fastboot is preventable now.Right now the only way for most new devices is a total wipe and the installation of an unsecure firmware with everything.As you already guessed this is to prevent now as well.So does all this rooting stuff actually concern you?Of course not!If you never had any need for rooting or no clue what to do differently with a rooted device than you are a happy camper.But your neighbour or friend might think differently.You see, I have two problems when it comes to "stock" devices.a) I have no clue what data they collect from me and what it might be used for.b) I do not like being forced to agree to terms that are endless and of questionable content just to use the damn thing.For crying out loud: In most cases it is now impossible to even set up a new device without working internet and a Google account.....

Topic by Downunder35m  


Can you check this design? Answered

On Aug 26 I posted an ask about a design of a new type of motor.  I received some good advices. Redesigned 02/10/12 The previous design had a major flaw, that went unnoticed at first but it became clear as I went into the construction of the prototype: the thermal barrier would be totally useless, because the steam produced in the boiler necessarily have to go through liquid water to make its way into the compression chamber. This would have two disabling consequences: 1) the vapor would cool quickly, 2) the water would heat up quickly, too. Since any heat engine operation is based on temperature differences, this failure is vital. The new design does not have that problem. The water falls directly into the hot boiler, a small amount at a time, with the piston in the upper dead point, or below (note that my drawing is reversed with respect to what would be a conventional combustion engine). The water is kept cold by being stored in a separate reservoir, attached to the motor body only by the inlet and outlet pipes. Water injection is performed by momentarily opening a valve at the appropriate time. Since the interior of the water reservoir accumulates pressure as the engine works, this pressure would be in principle the responsible to force the output water through the tap. If that's not enough, I could add a little manual compression pump to initially load the reservoir with compressed air. So once the Primus heaters worked, which were extremely useful for decades. The exact moment, quantity and duration of water injection should be adjustable during operation of the engine, to find the optimum point for these parameters. These mechanisms have not thought of yet, but they can not be too complicated. As regards the boiler, it is likely that one heated surface be insufficient to rapidly vaporize the water, since in these conditions it usually adopt a globular shape that greatly retards heat transfer (Leidenfrost effect, http://resnickscity.wordpress .com/2011/01/page/3 /, http://es.wikipedia.org/wiki/Efecto_Leidenfrost, http://en.wikipedia.org/wiki/Leidenfrost_effect). I think that could be solved relatively easily by a double bottom to the boiler, in order to "force" the water into laminar contact with the hot surface. If this is insufficient, it would still be possible to inject the water by pressure between two heated surfaces. I have to also investigate the possibility of to make "super hydrophilic" the surface of the boiler. Regarding the compression chamber, this design makes it much longer, thus establishing a better differentiation between the bottom hot and top cold. But the main novelty is that the displacer stops acting on a small amount of water to turn acting, as in the Stirling engine, on the entire volume of the steam in the compression chamber. By forcing the steam to move towards the cold zone it produces its condensation, thereby changing the pressure by decompression, and so completing the cycle of the engine. The condensation water adheres to the cold walls of the chamber, then it slides down by gravity, and is intercepted midway by the retaining ring, which leads it back to the water reservoir through a single action valve, spring driven. I guess that to pass the water to the reservoir will be enough the vapor pressure that occurs in each cycle. The accompanying drawings are quite precarious, but only pretend to give a general idea of the design. Please ask me if you want more details ------------------------------------------------------------------- Nuevo diseño 02/10/12 El diseño anterior tenía una falla importante, que me pasó desapercibida al principio pero se hizo evidente a medida que avanzaba en la construcción del prototipo: la barrera térmica iba a resultar totalmente inútil, dado que el vapor producido dentro de la calderita tendría que atravesar forzosamente el agua líquida para abrirse camino hacia la cámara de compresión. Esto tendría dos consecuencias inhabilitantes: 1) el vapor se enfriaría rápidamente; 2) el agua se calentaría también rápidamente. Dado que el funcionamiento de cualquier máquina térmica se basa en las diferencias de temperatura, esta falla resultaba vital. El nuevo diseño no tiene ese problema. El agua cae directamente dentro de la caldera caliente, una pequeña cantidad por vez, estando el pistón en el punto muerto superior, o sea abajo (ojo, que mi dibujo está al revés respecto de lo que sería el de un motor a explosión convencional). El agua se mantiene fría, por estar guardada en un reservorio separado del motor, unido a él solo por los caños de entrada y salida. La inyección de agua se realiza mediante la apertura momentánea de un grifo en el momento oportuno. Dado que el interior del reservorio de agua acumula presión al funcionar el motor, esta presión sería en principio la encargada de impulsar la salida del agua a través del grifo. Si esto no fuera suficiente, habría que agregar una pequeña bomba manual de compresión para cargar inicialmente de aire comprimido el reservorio. Así funcionaban antiguamente los calentadores Primus, que fueron sumamente útiles durante décadas. El momento exacto, la cantidad y la duración de la inyección de agua deben ser regulables durante el funcionamiento del motor, para hallar el punto óptimo de esos parámetros. Esos mecanismos no lo he pensado todavía, pero no pueden ser demasiado complicados. Respecto de la caldera, es muy probable que una sola superficie recalentada sea insuficiente para vaporizar rápidamente el agua, dado que en esas condiciones esta suele adoptar una forma globular que retarda mucho la transferencia de calor (efecto Leidenfrost, http://resnickscity.wordpress.com/2011/01/page/3/, http://es.wikipedia.org/wiki/Efecto_Leidenfrost, http://en.wikipedia.org/wiki/Leidenfrost_effect). Creo que eso podría solucionarse con relativa facilidad haciendo un doble fondo a la caldera, de manera de "obligar" al agua a establecer contacto laminar con la superficie caliente. Si esto fuera insuficiente, siempre quedaría la posibilidad de inyectar el agua a presión entre ambas superficies recalentadas. Tengo que investigar también la posibilidad de hacer "súper hidrófila" la superficie de la caldera. Respecto a la cámara de compresión, este diseño la hace mucho más larga, estableciendo así una mejor diferenciación entre la zona inferior, caliente, y la superior, fría. Pero la principal novedad es que el desplazador deja de actuar sobre una pequeña cantidad de agua para pasar a hacerlo, como en el motor de Stirling, sobre el volumen completo del vapor contenido en la cámara de compresión. Al obligar a este a desplazarse hacia la zona fría produce su condensación, cambiando así la presión por descompresión, y completando así el ciclo del motor. El agua de condensación se adhiere a las paredes frías de la cámara, resbala luego por gravedad hacia abajo, y es interceptada a mitad de camino por el anillo de retención, que la conduce nuevamente hacia el reservorio de agua a través de una válvula de simple acción, a resorte. Supongo que para hacer pasar el agua al reservorio será suficiente con la presión de vapor que se produce en cada ciclo. Los dibujos adjuntos son algo precarios, pero no pretenden más que dar una idea general del diseño. Por favor, pregúntenme si quieren más detalles.

Question by rimar2000    |  last reply


Instructables Maker Buddy Instagram Sweepstakes

We're hosting our first-ever Instagram Sweepstakes! This is your chance to win a phone video gimbal for you and a buddy! This nifty gimbal is great for boosting your storytelling for Instructables posts and Instagram stories! (Sorry folks, limited to the US only)Unlock your inner vlogger and head to our Instagram page for Instructions on how to enter: View this post on Instagram A post shared by Instructables.com (@instructables) on Dec 13, 2019 at 11:13am PST Official Rules BelowInstructables Maker Buddy Sweepstakes Official Rules(the “Official Rules”) PLEASE REVIEW THESE OFFICIAL RULES BEFORE ENTERING THE SWEEPSTAKES. NO PURCHASE OR PAYMENT OF ANY KIND IS NECESSARY TO ENTER OR WIN. A PURCHASE OR PAYMENT WILL NOT IMPROVE YOUR CHANCES OF WINNING.VOID WHERE PROHIBITED BY LAW. ENTRANTS WHO ARE MINORS: YOU MUST OBTAIN THE CONSENT OF YOUR PARENT OR LEGAL GUARDIAN BEFORE ENTERING THE SWEEPSTAKES AND PARTICIPATE UNDER THEIR SUPERVISION. Sweepstakes Description: Comment on the Instructables Maker Buddy Sweepstakes Instagram post, tag a friend who you think would also love the Prize and add the tag #InstructablesSweepstakes, and you will be entered into a random drawing to receive the prizes described below, all as further described in these Official Rules.General Conditions: The Instructables Maker Buddy Sweepstakes (the “Sweepstakes”) is sponsored by Autodesk, Inc. (the “Sponsor”). The Sweepstakes will start on [December 13, 2019 at 12:00 AM (PT)] (“Start Date”) and end on [December 16 2019 at 11:59 PM(PT)] (the “Entry Period”). Entry in the Sweepstakes does not constitute entry into any other promotion, sweepstakes, or contest. The distribution of the prize(s) will be at the sole determination of the Sponsor to the individual(s) deemed the winner(s) of the Sweepstakes by the Sponsor in accordance with these Official Rules.Acceptance of the Official Rules; Site Policies; Laws: By entering the Sweepstakes, those who enter the Sweepstakes (each, an “Entrant”) unconditionally accept and agree to abide by the terms of these Official Rules and by the decisions of Sponsor relating to the Sweepstakes, which are final and binding in all respects. The Sweepstakes shall be governed by these Official Rules and is subject to applicable federal, state, and local statutes, rules, regulations, and other laws (each a “Law”). The Sweepstakes is void where prohibited or restricted by law. The collection, use, and disclosure of information obtained online from Entrants in the Sweepstakes is governed by Sponsor's Privacy Statement, which may be viewed at https://www.autodesk.com/company/legal-notices-trademarks/privacy-statement, and other policies applicable to and available for review on the Instructables website at https://www.instructables.com/ (the “Instructables Site”) (collectively, the “Policies”). In the event there is an inconsistency between any of the Policies or any Sweepstakes promotional materials and the terms and conditions of these Official Rules, these Official Rules will prevail and govern. Eligibility: Entrants must be natural persons age 13 or older who are legal residents of the fifty (50) United States, the District of Columbia or Canada (excluding Quebec) at the time of entry. If on the Start Date you are a “minor,” meaning that you are under the age of majority in your jurisdiction, you must obtain permission from your parent or legal guardian, and your parent or legal guardian must consent to be bound by these Official Rules as if he or she were an entrant, before you submit an entry. Sponsor reserves the right to require minors to submit proof of parental/guardian permission and consent to these Official Rules at any time, without which they may be immediately disqualified from the Sweepstakes. In addition, Sponsor, its affiliated organizations, advertising and promotion agencies, the prize providers, any other company or organization involved with the design, sponsorship, or operation of the Sweepstakes, and each of their respective officers, directors, employees, and agents (collectively, the “Sponsor Parties”), and immediate family and household members of such individuals, are NOT eligible to enter the Sweepstakes. “Immediate family members” shall mean a person’s spouse and a person’s and their spouse’s parents, step-parents, legal guardians, children, step-children, siblings, and step-siblings, and each of their respective spouses. “Household members” shall mean those people who share the same residence, whether or not related. Participation in the Sweepstakes is voluntary, and is not intended to, and shall not be deemed to create, any employment, agency, partnership, joint venture, franchise, fiduciary, or similar relationship between Sponsor and any Entrant.How to Enter: Only persons who meet the eligibility criteria stated in Section 4 above should enter the Sweepstakes, and only those persons will be eligible for the chance to win a prize. No purchase or payment is necessary to enter or win the Sweepstakes. A complete entry will include, any information required in these Rules. All entries must be received by the end of the Entry Period. Incomplete, unreadable, late, or unintelligible entries are void and will be disqualified. In order to win, Entrants residing in Canada also will be required to answer a time-limited mathematical skill-testing question to be administered via telephone. Limit of one (1) entry per Entrant during the Entry Period. In case of multiple entries received from any person, email address, or social media account, only the first entry received from such person, email address, or social media account will be considered. In the event of a dispute as to the identity or eligibility of an Entrant, the entry will be deemed to be made by the “Authorized Account Holder” of the email or social media account used at the time of entry provided he/she is eligible according to these Official Rules. The “Authorized Account Holder” is defined as the natural person to whom the applicable internet service provider or other organization (such as a business or educational institution) has assigned the account. An Entrant may not use multiple email or social media accounts to enter, and if an Entrant does so, all of such Entrant’s entries may be disqualified. To enter the Sweepstakes, during the Entry Period you must comment on the Maker Buddy Sweepstakes post made by Instructables on the Start Date to the Instructables Instagram page, tag a friend who you think would also love the Prize and add the tag #InstructablesSweepstakes, and you will be entered into a random drawing to receive the prizes described below. THE PERSON TAGGED IN YOUR ENTRY WILL NOT BE ELIGIBLE TO WIN A PRIZE BASED ON YOUR ENTRY, BUT THEY MAY CHOOSE TO SEPARATELY ENTER THE SWEEPSTAKES BY SUBMITTING THEIR OWN ENTRY.For clarity, completion of one of the tasks as directed above does NOT entitle Entrants to a prize, but entitles eligible Entrants to enter a random drawing for a chance to win a prize. Winner Selection; Odds of Winning: On or around December 18 2019, at Sponsor’s offices, Sponsor will randomly select from the pool of eligible Entrants one (1) Sweepstakes winner(s) (the “Winner”). The odds of winning the prize depend on the total number of eligible Entrants who enter the Sweepstakes. Prize: The total estimated retail value of all of the prizes to be awarded in the Sweepstakes is $262. One (1) Winner will be awarded the following prizes with the following estimated retail value. The Winner may choose to keep both prize packs or share one with a friend:Prize Pack #1 (Estimated Retail Value: USD$131) EVO Shift Hand held 3axis gimbalInstructables T-ShirtInstructables NotebookInstructables PinPrize Pack #2 (Estimated Retail Value: USD$131) EVO Shift Hand held 3axis gimbalInstructables T-ShirtInstructables NotebookInstructables PinEvo Gimbals is not a sponsor of, and is not affiliated with, the Sweepstakes.The prize(s) may include one or more gift cards, gift certificates, stored-value cards, similar cards or certificates (whether in physical, electronic, or other form), or other items or services, which may be redeemed or received only at or through participating retailers or other locations. Each Entrant acknowledges that acceptance and use of any such prize are subject to all eligibility criteria, expiration dates, service or dormancy fees, use restrictions, and all other terms and conditions (if any) imposed by the issuer or provider of any such prize. Neither Sponsor nor any of its parents, subsidiaries, or affiliates is the issuer or provider of any such prize, and none of them are responsible for establishing those terms and conditions, for disclosing or explaining any of those terms and conditions to the Entrants, or for any Winner’s failure to comply with any of them. If a Winner does not comply with all of those terms and conditions, or if a Winner does not have access to a participating location, such Winner may not be able to obtain the maximum value, or any value, from his or her prize. General Prize Conditions: All details and other restrictions of the prize(s) not specified in these Official Rules will be determined by the Sponsor in its sole discretion. No prize is exchangeable, assignable, redeemable for cash or otherwise transferable, except at Sponsor’s sole and absolute discretion. Sponsor reserves the right to substitute for any prize one or more items or services of equal or greater estimated retail value. The value of each prize may be taxable to each Winner as income. If required, an IRS Form 1099 will be issued by Sponsor in the name of each Winner for the value of the prize(s) received. Each Winner is solely responsible for complying with any and all applicable federal, state, provincial, local, or other statutes, regulations, rules, or other laws of any jurisdiction and for bearing any personal income taxes (including reporting consequences thereof), VAT, customs duties, withholding taxes, or other taxes, fees, insurance, surcharges, or other costs relating to the applicable prize(s) and for any other liabilities incurred in connection with any prize. THE PRIZE IS AWARDED BY SPONSOR “AS IS.” THE SPONSOR PARTIES DO NOT MAKE AND HEREBY DISCLAIM ANY WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY (INCLUDING WITHOUT LIMITATION IMPLIED AND STATUTORY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, OR NON-INFRINGEMENT) WITH REGARD TO THE SWEEPSTAKES, PRIZE OR ANY PORTION(S) THEREOF.Winner Notification and Prize Claim: Within five (5) working days after the drawing, each Winner will be notified via Instagram message to the Instagram account provided in his or her Sweepstakes entry (a “Prize Notification”). Sponsor shall have no liability for any Prize Notification that is lost, intercepted, or not received by the potential winner for any reason. In order to claim a prize, each Winner may be required to provide his or her full permanent mailing address information and social security number or tax identification number for purposes of compliance with tax regulations. Upon Sponsor’s request, each Winner must also sign and return a release of liability, declaration of eligibility, and/or a publicity release. If a potential winner does not respond within forty-eight (48) hours of the Prize Notification (or a shorter time if required by exigencies), if the prize(s) or Prize Notification is returned as unclaimed or undeliverable to such potential winner, if a potential winner fails to comply with any of the verification or release requirements identified in this Section within fourteen (14) days of request, or if the potential winner is found to be ineligible, has not complied with these Official Rules, or declines the prize(s) for any reason prior to award, such potential winner will be disqualified and forfeit his or her prize, and an alternate Winner may be selected by the Sponsor from the pool of remaining eligible Entrants. Sponsor may successively attempt to contact up to five (5) potential winners in accordance with such procedure, and if there is still no confirmed winner of a prize after such attempts have been made, Sponsor may announce an alternate means for awarding that prize. The Winner must take possession of the applicable prize in the manner directed by Sponsor. Failure by the Winner to comply with any of the foregoing may result in disqualification. It is the sole responsibility of Entrants to notify Sponsor of any changes in name or contact information. In the case of a minor, Sponsor may award the prize to such minor’s named parent or legal guardian.Representations: By entering the Sweepstakes, each Entrant represents to Sponsor that: (i) the Entrant meets all eligibility requirements of the Sweepstakes; and (ii) Entrant understands and agrees that he or she shall not become, through participation in the Sweepstakes, an employee, agent, partner, joint venture, franchisee, or fiduciary of Sponsor.Release of Liability: To the maximum extent permitted by law, by entering the Sweepstakes, each Entrant agrees that neither the Sponsor Parties, nor any prize manufacturer or provider, nor any advertising or social media platform, such as Facebook or Twitter, on which the Sweepstakes may be advertised or through which it is accessed, is responsible for and, to the maximum extent permitted by law, each Entrant releases and holds harmless the Sponsor Parties, each such prize manufacturer or provider, and each such advertising or social media platform, from any and all responsibility, liability, claims, injuries, damages (including but not limited to direct, indirect, incidental, consequential, punitive, statutory, or other damages), losses, costs, or expenses of any kind (including, but not limited to, personal injury, death, or damage to or loss of property) arising out of or resulting from: (i) any violation by such Entrant of these Official Rules, the Policies, or applicable law; (ii) Entrant’s participation in the Sweepstakes; (iii) Entrant’s acceptance, possession, receipt, and/or use of any prize (or any portion of any prize) or the sharing or gifting of any prize with any other person; (iv) any printing or typographical errors in any Sweepstakes materials; (v) any problems or technical malfunctions (errors, omissions, interruptions, deletions, defects, failure to capture information or delays in operation or transmission) whether caused by Entrant, printing errors, human error or by any computer, telephone, modem, satellite, online system, server, or other communications equipment or provider associated with or utilized in the Sweepstakes, including any incorrect, incomplete, inaccurate, or garbled information resulting therefrom; (vi) any damage to Entrant’s equipment (such as a computer system or mobile device) caused by accessing the Instructables Site or participating in the Sweepstakes; (vii) miscommunications, or any failed, jumbled, delayed, or misdirected computer, telephone, cable, or other transmissions; (viii) any entry, e-mail, prize package or other material or correspondence that has been tampered with or that is stolen, misdirected, incomplete, lost, late, non-conforming, ineligible, or damaged; (ix) any failure of any postal or delivery service; (x) any other technical or human error that may occur in the administration of the Sweepstakes; or (xi) any events beyond Sponsor’s reasonable control. LIMITATION OF LIABILITY: NEITHER SPONSOR NOR ANY OTHER SPONSOR PARTY SHALL BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE SWEEPSTAKES, ANY PRIZE, OR THESE OFFICIAL RULES, HOWSOEVER CAUSED, WHETHER ARISING IN TORT, CONTRACT, STRICT LIABILITY, OR OTHER LEGAL THEORY, AND REGARDLESS OF WHETHER SUCH SPONSOR PARTY WAS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND ALL SUCH DAMAGES ARE HEREBY DISCLAIMED AND EXCLUDED.Disqualification: Sponsor reserves the right, in its sole and absolute discretion, to disqualify any Entrant who Sponsor determines, in its sole discretion, (i) has tampered with the participation process, the operation of the Sweepstakes, or affiliated websites; (ii) has acted in an unsporting or disruptive manner, to disrupt or undermine the legitimate operation of the Sweepstakes, or with intent to annoy, abuse, threaten or harass another person; or (iii) is otherwise in violation of these Official Rules, the Policies, or any applicable Laws. Sponsor reserves the right to seek damages and other remedies from any such person to the fullest extent permitted by Law.Termination/Modification: Sponsor reserves the right, at its sole discretion, to suspend, modify, or terminate the Sweepstakes at any time for any reason, including without limitation in the event of fraud or abuse, or due to natural disaster; equipment failure; civil disturbance; fraud; technical, administrative, financial, or other difficulties; technical problems (such as a computer virus/ bug); unauthorized intervention that corrupts the administration, security, fairness, integrity or proper functioning of the Sweepstakes; or other causes not within the control of the Sponsor. In addition, if, in the exclusive judgment of Sponsor, the Sweepstakes (or any portion thereof) becomes compromised in any way, Sponsor reserves the right, at its sole discretion, to cancel any method of entry, to void any entries submitted fraudulently, and/or to select winners from among all non-suspect eligible entries received prior to act that compromised the promotion. Should the Sweepstakes ever be terminated before the drawing, notice will be given on the Instructables Instagram page, and Sponsor will make alternative arrangements to award the prizes. Any such changes will become effective upon notice via online posting on the Instructables Instagram page or other means of wide dissemination.Use of Winner’s Information: All personal information collected by Sponsor (including without limitation, an Entrant’s name, biographical data, and city and state of residence) may be used for by Sponsor, or any third party chosen by Sponsor, of any and all information related to the Sweepstakes, including any personal information obtained through the Sweepstakes, for Sweepstakes administration, and other purposes, except to the extent prohibited by law. Without limiting the foregoing, by entering the Sweepstakes, each Entrant grants to Sponsor and each of its respective designees the right to use and publish the Entrant’s name, and state of residence, along with any other information provided by Entrant, both electronically (for example, on the Internet) and in print, in connection with the Sweepstakes at any time, except to the extent prohibited by law. By accepting a prize, the Winner acknowledges and grants to Sponsor and each of its respective designees, without additional compensation or consideration, notification or permission, the right to publicize his or her name, address (city and state of residence), likeness, photograph, voice, company name, and biographical material in any media now known or hereafter devised, throughout the world, in perpetuity, except to the extent prohibited by law. Other than as set forth in these Official Rules, Sponsor will treat any personal information supplied in connection with the Sweepstakes in accordance with the Policies. Please refer to the Policies for important information regarding the collection, use, and disclosure of personal information by Sponsor. License Grant: Any data or information included in entries must not infringe the intellectual property, industrial property, privacy, publicity, or other rights of any third party, and must be suitable for publication to a general audience (i.e. it may not be obscene, indecent, defamatory, hateful, or inappropriate, as determined in Sponsor’s sole discretion). By submitting an entry, each Entrant irrevocably grants Sponsor and its designees the unconditional, irrevocable, and perpetual right and permission, royalty-free, to use any data, information, images, content, or materials included in such entry, in any media now known or hereafter devised, throughout the world for any purpose. Sponsor is not obligated to use any of the above-mentioned data, information, images, content, or materials, but may do so and may edit them in Sponsor’s sole discretion, without further obligation, credit, or compensation. Each Entrant waives all intellectual property rights, privacy/publicity rights or other legal or moral rights that might preclude the Sponsor’s use of the entry or exercise of any rights granted to Sponsor, and agrees not to sue or assert any claim against the Sponsor Parties with respect to such use.Interpretation: The invalidity or unenforceability of any provision of these Official Rules shall not affect the validity or enforceability of any other provision. If any provision of these Official Rules is held by a court of competent jurisdiction to be invalid, illegal, or otherwise unenforceable, such provision will be modified by such court to the minimum extent necessary to make it enforceable while preserving to the maximum extent possible the original intent of Sponsor, and the remaining parts of these Official Rules will remain in full force and effect. Sponsor’s failure to enforce any term of these Official Rules shall not constitute a waiver of that term.Disputes: Except where prohibited, each Entrant agrees that: (i) any and all disputes, claims, and causes of action arising out of or connected with these Official Rules, this Sweepstakes, or any prize shall be resolved individually, without resort to any form of class action, and exclusively by the state courts located in Marin County, California and each Entrant irrevocably waives any objection to the venue and jurisdiction of such courts; (ii) any and all claims made by Entrant, and any and all judgments and awards in favor of Entrant, shall be limited to actual out-of-pocket costs incurred, including costs associated with entering this Sweepstakes, but in no event attorneys' fees; and (iii) under no circumstances will Entrant be permitted to obtain awards for, and Entrant hereby waives all rights to claim, indirect, punitive, incidental and consequential damages and any other damages, other than for actual out-of-pocket expenses, and any and all rights to have damages multiplied or otherwise increased. All disputes concerning the Sweepstakes, the construction, validity, interpretation and enforceability of these Official Rules, or the rights and obligations of each Entrant and Sponsor in connection with these Official Rules or the Sweepstakes shall be governed by, and construed in accordance with, the Laws of the State of California and applicable United States federal law, without giving effect to any choice of law or conflict of law rules (whether of California or any other jurisdiction), that would cause the application of the Laws of any jurisdiction other than California.No Endorsement: Nothing contained in these Official Rules or in any of the Sweepstakes materials should be construed as an endorsement by Sponsor of any third party, product, or service. Prize suppliers are not sponsors of the Sweepstakes.Social Media: The Sweepstakes may be advertised on or accessed through one or more social media platforms, such as Facebook, Instagram or Twitter. However, the Sweepstakes is in no way sponsored, endorsed, or administered by, or associated with, any such platforms. When entering the Sweepstakes, Entrants are providing information to Sponsor and not to such platforms. Entrants agree to comply with all terms and policies governing such platforms in connection with the Sweepstakes.Questions/Winner’s List/Official Rules: The name of the Winner will be posted on a post on the Instructables Instagram page or a dedicated page of the Instructables Site on or after December 18, 2019. The name of the Winner also may be obtained after that date by mailing a written request, along with a self-addressed stamped envelope, (Vermont residents may omit the return postage) to:Winner’s List – Instructables Maker Buddy SweepstakesAudrey LoveAutodesk, Inc.111 McInnis ParkwaySan Rafael, CA 94903All such requests must be received no later than six (6) months after the end of the Entry Period. Questions regarding the Sweepstakes may be directed to Sponsor at: service@instructables.com or (310) 396-1167These Official Rules will be posted on the Instructables Site during the Entry Period and for six (6) weeks thereafter. Intellectual Property: AUTODESK, and Instructables are trademarks or registered trademarks of Autodesk, Inc. in the United States and other jurisdictions. Other brands may be the trademarks of their respective owners. These Official Rules, the Instructables Site, and all other Sweepstakes-related materials and code may be protected by Sponsor’s or third-party copyrights or other rights. Copying or unauthorized use of any copyrighted materials, trademarks, or any other intellectual property without the express written consent of the owner is strictly prohibited.

Topic by audreyobscura