layout of the site

why does instructables have to change the layout for the worse every time i get used to the old one? this most rescent one is horrible! it just might make me quit the site. ***edit***  i didnt realize how whiny this sounded until after i posted it. i dont like that there is a drop-down for the different channels in the catergories. and the tape around the pictures in the instructables are annoying. the main screen doesnt fit onto my internet window any more, i have to use a scrollbar at the bottom to see it all

Topic by Dr. Who   |  last reply


New Layout

I'm a very compulsive browser, and when I noticed that all the categories were no longer laid out in a neat little row at the top of the page, well i left and went here icanhascheezburger.com .. check the lay out.. kinda looks like the old one instructables had.. everything easy to find with out jumping through hoops. That's my $0.02

Topic by Yandle   |  last reply


New Layout?

I, being a freak who reads every new instructable, don't like the new layout. I used to hit "ALL", then sort by "RECENT" so I could see all the new stuff for the day... Now when I hit "ALL" it just stays on the home page, and there is no "RECENT" section. I am not about to go through every tab "All, Art, Craft, etc etc" and scroll to the bottom to find the "RECENT" header for each and every page. Thats a lot more work than many are willing to do. Really, folks, I would love to have the old functionality back. Is there a way to view it the old way?

Topic by TFD2   |  last reply


Page Layout

The menus and header layout don't display right in IE9 (nor IE8 or IE7 mode). See the attached file.

Topic by rrdenn   |  last reply


scrapbook layouts

Ever have a time when you just can't think of a new layout for a scrapbook page? Well, I know I have! You might take a look at this book I've discovered; it's been a help to me. http://crafts2u.500SS.hop.clickbank.net

Topic by nanamary   |  last reply


New page layout

I hate what you did to the web page it really sucks.

Topic by tomary   |  last reply


PM layout missing

There doesn't seem to be any layout formatting in PMs any more, not even line-breaks. If a message is more than a line or two long, or involves several replies back and forth, it gets very annoying.

Topic by Kiteman   |  last reply


New site layout

I like the new site layout. I'm sure others will have a problem with it but change is typically a good thing. It will just take some getting use too is all.  Keep up the good work!

Topic by mpilchfamily   |  last reply


Layout change in instructable?

I don't know if this is a bug or a new feature and I've only seen it in one instructable so far (https://www.instructables.com/id/Foil-Solar-Panels-for-Windows-VERY-Easy/). The secondary images are not smaller and are interspersed with text.  For example in step 2 there are 3 large images.  Is this a new format? If so I like it, how do I make mine look like that? or is this just a unique author/instructable?

Topic by ChrysN   |  last reply


new instructables layout

Is this what it's going to be? it has changes since i first saw it years ago.

Question by The nerdling   |  last reply


New Homepage Layout?

I've just noticed that the big Flash banner on the homepage has gone and been replaced with a new banner. And I must say I quite like it! Nice and simple.

Topic by asasklfjklasfkljasklfjaklfsjkl   |  last reply


new contest layout

Wow a new layout again! Nice. I'm not sure which i actually prefer. Which did you like best? by the way: Look for my instructable among the other great instructables in the photojojo contest! I dont watn to tell you the name or give you a link, that way, you'll look through other i'bles first! There's a LOT of great i'bles there. As much as I'd like and need that wifi card, there are others much more deserving. so go out there and vote vote vote! May the best instructable win!

Topic by alvincredible   |  last reply


Bug in the Instructables Layout

On my computer, when I am on an Instructable, slideshow, or video the main layout of the Instructables website changes.The righthand sidebar moves down to below the last comment and makes the page a lot longer. Also the drop down bars at the top are longer because they only allow one link per row.I don't know if this is just the new layout of the Instructables or if it is just something with my computer. Whatever it is it has just gotten annoying and I had to tell someone. Could someone (Preferably the admins)tell me what's wrong.EDIT 6/22/08It is fixedit has been fixed for weeks so stop giving me useless advice

Topic by n8man 


Protoboard Layout Software?

I'm looking for recommendations for good software for making schematics and layouts for protoboard (you know, the copper clad perf board). I've tried expressPCB and looked at Eagle, but they're designed for etching a board - not as helpful as I'd hoped. I want one that allows you to easily create a schematic, generate netlists, lay out your parts, and create connections. ExpressPCB does this, but it is missing something I would really really like - the ability to view the reverse side of the board (for when you're wiring the board). What do you use? Do you like it? What is it missing? Oh yeah, and I don't want to pay anything, either. I'm cheap!

Topic by jptrsn   |  last reply


Too many layouts!!!

I am getting a little annoyed by how the layouts are always changing. And I bet a lot of other people  are too.  ...so I got an idea that there should be a poll, showing all of the previous layouts, and maybe a few new ones, where the Instructables community could vote and pick their favorite one. Leave a comment on what you think about this, or give some other suggestions...

Topic by zascecs   |  last reply


New Website Layout

I'm not a fan of the new layout.  I liked having all categories viewable on the homepage, and I found it to be user friendly for my daily visit to the site. Not a fan, Just sayin'........

Topic by Pat_Maroney   |  last reply


Schematic and PCB layout

I saw a schematic from http://makelifeeasy.yolasite.com/ this is the schematic design http://members.misty.com/don/linefl.gif and i tried to make a PCB layout and this is what i came up with the design http://img825.imageshack.us/i/circuitz.jpg/ is the layout correct? the blue line will likely be a jumper wire.. thanks in advance for the guidance.. =]

Question by gameshark888   |  last reply


New site layout?!

Well, i got to work this morning, and went on to check ibles, and i get hit with a paper wallet, i just checked it, and ive found a new layout, and a 'customise' feature! Also, i am able to create a new topic inside of safari instead of having to use firefox! What does everyone think to it? Personally i love the customize feature, it lets me put in direct links to where i want to go. But i must say i miss the drop down box feature, especially on the 'submit' link And i preffered the old location of the links (in the orange band) - I never use the 'categories' It does seem to look a bit squashed up top, (as a graphic designer its a bit unpleasing) But overall, i like the new style!

Topic by gmjhowe   |  last reply


Contest Layout and more

The latest changes are mostly around the layouts and inner workings of contests.  We've arranged all the contest information in tabs on one page, minimizing the work you need to do to find out all the contest details.  We also made some backend changes to allow the contest manager a bit more flexibility in how the contest looks, especially for contests with sponsors. Additionally, we have published for the first time our detailed Privacy Policy.  There's a lot of detail there but the important bit is about halfway down: "Instructables will not rent or sell potentially personally-identifying and personally-identifying information to anyone." We've always had that policy internally, but now it's published and official.  It's linked on every page, in the footer, along with the other "About Us" links. Finally, we've done a bit more tweaking of the header - avid Answerers will be pleased to note, we took your advice and returned the Answers link to the top level navigation.  Also we're trying out having the search box just up under the login bits, to save a little vertical space.

Topic by rachel 


Go back to the old layout.

I've noticed that in the attempts websites make to become more and more advanced, they always somehow mess up and make their layout WORSE than the last one.  The one we had before was good.  The one before that was better.  Same thing for any other site.  Google has had the same layout for who knows how long, I respect them for that.  They made a simple interface, clearly laid out buttons, and they left out all the garbage.  When the stats and related ibles were on the right of the instructable, it centered the instructable currently being viewed on the screen which was good for my eyes.  I don't know why you guys decided to change it, it was fine the way it was before. Just my honest opinion here... Update: Thanks for taking my advice guys!

Topic by DJ Radio   |  last reply


Site layout and taging problems

Today i've noticed that the bottom of the page has been thrown back to the late 90's in the way its showing displaying. The whole site layout has suddenly changed it little ways. What once use to be buttons are now hyper links. Are you in the middle of a site update here? The discussion tab in your profile view has also changed. Almost like its trying to show the recent comments in 2 different ways. Every once in a while when i try to change tabs in the profile page it gives me a pop up saying the site is having trouble. I have to say this HTML throwback look isn't working for me.

Topic by mpilchfamily   |  last reply


Top of page: layout gone awry

Using my work laptop, IE9.0 in Windows, the layout of the top of the page gets messed up - menus drop down, search box disappears.  See screen grab for typical example. (Special offer: extra bug for free - the image notes I added disappeared when I hit preview.)

Topic by Kiteman   |  last reply


Layout and page down function

The banner or top frame is enormous.  Why?  When I'm reading the instructable I admit I have the zoom enlarged.  the problem is the banner enlarges.  Now it occupies about 25-35% of the vertical space.  Why am I seeing this thing when I hit page down?  There's absolutely nothing of value on that banner.  Most of us (unless we have zero short term memory) don't need to see this space wasting thing.  Why not have an "opt out" option for it?  Give your readers a choice.  Readers like choices.  When I use Page Down using Firefox on Win7 it doesn't work accurately.  It goes too far so I'm missing a line or 2.  This has been like this for years.  Its because of that banner.  This happens often on many websites.  ----------------------- PDF downloads are nice but an HTML download would be far more useful as then the line could have an adjustable wrap width.  With the PDF the image size is locked.  This is very restricting and so last century.  Consider an HTML download  (minus that space wasting banner...duh) and that would preserve formatting and allow good user control.  ----------------------- You have one of the most informative and useful websites on the planet.  You should be proud of it.  I hope you are because its well deserved.  So now lets get it functioning more logically!

Topic by SpencerW 


Not crazy about the new picture layout.

It's been a few days now & I've viewed quite a few things in that time both on my laptop & mobile and having given it some thought and a few days to get used to it I have to say that the new picture layout really does not tick the boxes for me. I can understand the desire to improve the layout where possible & I can understand wanting to show off the pictures at their best but it has been done at the cost of ease of use of the site. it works fine on 'ibles with only two or three pictures to a step but what seems to have been forgotten is that many 'ibles have a large number of pictures to each step meaning that the viewer has to scroll through all the pictures before getting to any text then scroll all the way back up again to refer to any pictures being described, on some 'ibles this may not be a problem but on many others I predict it will. The reason for the change has been given that "We wanted something that emphasizes your images in a format that is a bit more contemporary." which is all very well but I feel that the end result may well be that many images get overlooked altogether in an effort to get to the actual text of the 'ible & some 'ibles may simply get clicked away from because viewer's get tired of scrolling through image upon image to find out just what the 'ible is really about, I know I have already been guilty of this on at least one occasion in the last few days. I guess if the layout remains members will have to bear this in mind & decide on that basis how many images they will use but I can see 'ibles that have large numbers of images particularly in the introduction getting fewer repeat visits than when we could simply click & choose the images we wanted to view in greater detail. If I were able to choose between the old layout & the new one both to view & create 'ibles  I'm afraid I have to say that based on what I have seen over the last few days I would choose the old layout. i appreciate that HQ is constantly looking for ways to improve the site & a lot of hard work & thought is put into these things but on this occasion for me at least it has had a negative impact.

Topic by Nostalgic Guy   |  last reply


New "Contemperary" Layout of Pics Doesn't Quite Work

On I devices, such as the iPad I am using currently, the new picture layout gets messed up. I can't quite describe it but it takes a while to load, and if you tap certain pics it opens up another window and sometimes takes you to the users profile page. I would highly appreciate, along with others, if there was a option in the profile (like the option for all steps on one page) to be able to switch to the older version. I myself liked it much more than the new layout, because I can choose which picture I want to see, and not have to see them all. Thanks! MackeFeet

Topic by MackeFeet   |  last reply


New profile layouts -- good things and bad things

So Rachel deployed the server updates this morning. There are a lot of nice features, but at least one bug(?) and a couple of things I wish were different...Like the bigger patches :-)Like the icon format for my I'bles, favorites, and groups (on the /member/... version)Like the no-longer-present "(0)" in the INBOX link at the top of my pageDon't like the no-longer-present "(1)" "(2)" etc. in the INBOX link at the top of the pagePossible bug: Why are there "short lines" in the icon layout of my I'bles?Why don't the icons have the "featured" or "winner" banners?Would like the icon format on the /you/ page as wellWould like the "icon vs. long-line" toggle buttons for both viewOverall, the changes are light and subtle, but give things a look more consistent with the rest of the site.

Topic by kelseymh   |  last reply


Is there a way to set graphical search as default? Answered

I like the new Instructables layout, but the new search feature... not so much. Is there a way to set the graphical search as the default search?

Question by nickodemus   |  last reply



New Personal Page Layout

. I like the new layout. Picture courtesy of caitlinsdad

Topic by NachoMahma   |  last reply


Webcam module pins layout

Which are the pins of this camera HP PN 692893?thanks!

Topic by christ479   |  last reply


New PDF Layouts on the way

Hi all, Just a quick heads up for pro members: in our continuing efforts this year to add value to pro memberships, we're releasing changes shortly that should make the PDF downloads much simpler to download, and much more attractive and readable once you do. They feature two-column layout for more readable text, and accommodate much more of the formatting that makes each Instructable unique. To begin with, these new PDF layouts will only appear for newly generated PDFs. As we receive your feedback on them and iron out any kinks, we'll expand to include more projects, replacing the old PDF layouts over time. Big changes like this always come with some unpredictable parts, so if you notice anything that's a little off, please let us know! ~Devs

Topic by pseaton   |  last reply


My Feedback on the Instructables Layout

The new layout of the website totally rocks!! The homepage is nifty and easy to use. I just love the huge search bar in the middle. The background suits the website perfectly, and I love the automatic typing when you first arrive at the webpage! The bar at the top now has you click on it instead of rolling over. This solves my original problem I mentioned in the forums before of the roll over function not working on an iPad. I love every bit of the new layout, great job Instructables team! :)

Topic by Jessie Marie 


Epilog contest page layout

So, I saw the Epilog contest today and when I saw the page, I noticed the different layout for the header, and I liked it. Just stick in the orange and change the "You" bar to white and you have a much slimmer header bar for Instructables. Any thoughts?

Topic by n8man   |  last reply


Big site layout bug

Okay,ummmmm,wow. What a bug Edit, I figured out what the problem is, it seems to be firefox. Edit, Okay, now it works, that was weird (nobody even commented on this)

Topic by n8man   |  last reply


Webcam module pins layout

Which are the pins of this camera HP PN 692893?thanks!

Topic by christ479 


New Contest Layout Problem

In the new contest layout, there are no dates like there used to be so we dont know the exact dates of entry deadline, judging, voting etc Please could one of the site mods like rachel  fix it Thanks CherishCherub

Topic by cherishcherub   |  last reply


Has the instructables layout changed? Answered

I recently won a years free membership and I activated it, and came back 8 hours later. Has the instructables layout changed naturally or is it different for pros? The new tabs are labelled; Create, explore, contests and more. Can you help?

Question by HMice   |  last reply


Home Page Layout Suggestion

I was thinking, after seeing the new home page layout, if to fill in the bottom space under subscribed -ibles, why not put a Suggestion Box, with suggestions for instructables you might like. I'm not sure if -ibles supports/records who looks at which instructables, but its just an idea. :D

Topic by bumpus   |  last reply


Arduino PCB Board Layouts

I thought I might share some the circuit board layouts (Top and bottom) of several Arduino boards that I've created. They could be used to etch your own board or just used to compare sizes. I created them from the eagle files provided from the Arduino website and exported each layer in monochrome with help from this Instructable. Automating Eagle export and preparing it for printing by truhlik_fredy To create your own PCB layout on eagle i found this Instructable was the most helpful Turn your EAGLE schematic into a PCB by westfw Download Eagle for free here The File is available as an Adobe Illustrator file and as a png

Topic by MrSirLRD 


New Image Layout Released

Hey everyone! You may have noticed, we have a new image layout that just got released. We wanted something that emphasizes your images in a format that is a bit more contemporary. We did lots of in house testing so you shouldn't see any problems, there is sometimes some cached CSS as well but that should clear up within the hour. if you do see some problems, post them in the bugs forum and we will fix them. We also released a few fixes on PMs again so hopefully they are formatted better for you. Thanks for being a part of the instructables.com community! -Gregg Horton QA engineer

Topic by frenzy 


Help With Eagle PCB Layout

Hello All. I'm trying to etch a board created in Eagle.  2 Questions: When I export the image, the "plastic part" of the pin headers on my board are showing up in the exported image. Is this image really "doable" using a toner transfer method due to the thin clearances and trace widths? Exports of the schematic and board images are attached. Thanks! Cam

Topic by evilknot   |  last reply


Favorites tab layout change

So I'm not sure where exactly this is going to end up, but if either the members or creators of Instructables see it, I'll count that as mission accomplished. I have over 100 tutorials favorited on Instructables, and that's great, I love all of them, they're really cool. But it's a nightmare to sort through them. Who else agrees that we should be able to make lists in our favorites, of tutorials that go along a particular theme? Especially if you have many varied interest, like I do. Any thoughts?

Topic by TheNotoriousHoppington 


General layout all a bit Pete Tongue

The general layout seems to be all over the place :-( I have noticed that the list of something that includes the Kit Design Challange! on the home page is layed out over the How to add EL wire to a coat tab. the explore channels also keeps converting itself into a list that goes straight down going off the page. The search is over the Robotics - ACE Quick Fixes area and is not shown as the search. The notes on the images are not in the correct place, they have been moved over to the right. Win XP with IE8, tried with compatibility mode on with no difference. Also tried IE8 on Win7, also on Xoom with Android whatsit browser. And when I went into competitions and view entries I get logged out, when you try and vote it gives you the popup to log in, enter details and it takes you back to the competition main page. How can I win if I can't keep voting for myself??? ;-) Erm, forget I mentioned that last bit....... Other than that, top job!

Topic by Djandco   |  last reply


New layout of comments meta-data seems compressed and cluttered

I don't think I like the tweaks that were done to the comments format.  The user's avatar, date/time stamp, and username are all mashed together with no spacing between them.  I liked having the date/time in the upper right corner, but I know that a lot of users missed the information (leading to silly bumps and year+ late replies).  Perhaps you could do something like: [Avatar] wrote on : with some spaces to keep the formatting nice?

Topic by kelseymh   |  last reply


Two bugs with Instructables layout update -- Step 1 is inescapable

In a recent post, I mentioned that the presentation of Instructables had changed slightly.  Instead of the first ten steps in a "table of contents", now you see the Intro and Step 1 in full.  It turns out that there are two bugs associated with this change. First, Step 1 seems to  always show up, whether you've viewing the Intro, or viewing Step 17. UPDATE 17 Aug 2010:  This has been fixed. Second, when you click on the links for either the Intro or Step 1,  you see the same thing, those two steps together in full. UPDATE 17 Aug 2010:  Actually, if you click on the Step 1 icon in this case, the page jump-scrolls to the start of the Step 1 text.  This is a feature, not a bug. There's no problem with "View All Steps" (for paid users).  That behaves the same way it always has. UPDATE 17 Aug 2010:  "View All Steps" now uses jump-scrolling.  If you click on any of the step icons at the top of the I'ble, your browser will scroll to the start of that step on the same page, rather than loading a new page.    This is a feature, not a bug.

Topic by kelseymh   |  last reply


New/swapped columns in Instructables -- restored

On Monday 8 Feb 2010, I wrote: I'm not sure that I like the swapped page layout -- with the author info, staff feature options, and so forth on the left side.  Since English is read left-to-right, this means that administrative info is given "top billing", while the actual Instructable content is relegated to second place.  It also means that some of that content is cut off of the viewer's display, depending on how they have chosen to size their browser window.  The fact that I'bles makes assumptions about browser size and shape is, of course, wrong in the first place, but the new layout makes that wrongness even more obvious to the casual user. UPDATE:  Tuesday morning, 9 Feb 2010, the administrative info is back on the right side of the page.

Topic by kelseymh   |  last reply


Login Hard

When I try to login to the website I found it difficult to click on the password box. It was covered with tabs "Answers" "Contests". Please fix

Topic by enoted   |  last reply


Search box gone odd

The search box has gone peculiar on the SciFi contest prize page. See top-right corner of screen grab. FireFox, Windows XP

Topic by Kiteman   |  last reply


PM Formatting

It's been asked before, many times, but still has not happened. Can we please have formatting preserved in PMs? I've had a number of long PMs recently, and all very hard to read because they were in a single block of text. Yes, I know we can type in code ourselves, but I'm on my iPod right now, and a single line break in a PM takes 10 key-strokes!!

Topic by Kiteman   |  last reply


Where do I put my latest knitting / soldering / home renovation project?

There have been a lot of changes here at Instructables.com, and we're about all of the great feedback we've received. While you're still getting used to the new categories and channels, take some time to poke around and familiarize yourself with what goes where. Living, for example, can mean a lot of things - recipes, sewing, finances, health & beauty, travel, and a whole lot more. Workshop is another great category to browse through.  We have new home renovation, metalworking and tools channels, just to name a few! So while you're cranking out more awesome new projects, and scoping all of the great new stuff, take some time to look around. ***My secret insider tip is to click the Browse link at the top of the page next to the Robot.  Then, when you click on a category listed on the left, it will give you a list of all the new channels therein! Happy hunting, and as always, feel free to contact us with your questions and praise.

Topic by scoochmaroo   |  last reply