anyone have instructions for the knex loopin lizard? Answered

I have a lot of parts andf i'm 98% sure that i'll have enough if you do please give a link!

Question by smilee   |  last reply


How to time a little door so it opens at a certain time? (no need to close)?

I want to build an automatic cricket feeder for my lizard (bearded dragon) because I have to stay home at her eating times and sometimes I want or need to go out. * Ideally I would like to build a small "cabinet" with 1-3 drawers and somehow make the doors open at 11am, 4pm and 9pm, * If this is too hard one door will do but I would need to reprogram it constantly. (crickets would be inside and they would get out as soon as the door opens) * I already have a timer that I can plug and program to 23 different times so I was thinking on using that (or not), It could be something that when on opens or keeps the door open, and I can keep it off the rest of the day with the timer, I just don't know how to do this and how to do something that won't burn after a minute on because that's the minimum time the timer works. * It doesn't need to close back (and that is safer too) * It can't be light activated because some lights are on at all times and another has a timer and goes on for 20 minutes every hour. *It needs to be small because the terrarium is 18inchX18X18 and I don't want to take a lot of room Thank you so very much!!

Question by mameloski   |  last reply


What's the difference? Answered

I looked at the Loopin' Lizard instructions and it said not to use standard k'nex ball, what gives?

Question by TwistedParadox   |  last reply



How to Build a coffee table terrarium?

I am looking to build a terrarium, from scratch, and want ideas on adding live plants and lizards.

Question by    |  last reply


does anyone here own/breed Bearded Dragons (help needed)?

Hello! lately i have been looking into buying a bearded dragon, preferably a central one. the sites i've looked at often seem to contradict each other and i would like to ask someone a few questions regarding these lizards so if you own/breed bearded dragons could you please PM me or just write an answer below telling me that you do? thanks AAG

Question by AussieAnglerGal 


HELP - Gecko escaped - HELP

Ok, I have a gecko (leopard gecko, orange color morph) and I bought it for HK$900 (US$90). And it escaped! At 10:00 it was there and then in the next five mins its gone! I looked everywhere and blocked every door. Help plwwwwwweeeeeaaaaaaassssssssseeeeeeee?

Topic by TNEN   |  last reply


Ideas for DIY mesh chameleon cage?

We're planning to get a Yemen (veiled) chameleon and found a US manufacturer making cages like the one below, however the shipping to the UK was prohibitive. So, I'm thinking of a DIY version using THIS sort of mesh and rigid plastic extrusions and was wondering if anyone's made something similar. It needs to be fairly presentable, so plumbing tubing with net draped over is a non-starter. Required size is 30" wide x 16" deep x 42" high.

Question by AndyGadget   |  last reply




Free: GIANT Maggots free to a good home

No Joke! Go to the link below and check it out. If you ever wanted to farm bait maggots, these squirmers are HUGE. So was their mother! https://www.instructables.com/id/Eco-friendly-Maggots-FREE-Natural-Food/

Topic by cloudifornia   |  last reply


Any good bands?

 I really like bands like Nirvana, Mudhoney, The Jesus Lizard, Seaweed, Black Flag, Sonic youth, etc. I am tired of living in the 90s, and was wondering if anyone knew any newer bands that I might like.  Thanks! 

Question by simplicity is key   |  last reply


What do i do if my pet chiwawa tries to kill me?

OK, include how to spell chiwawa in your answer. Second, he killed all my chickens,  my lizard, and a tree(dont ask). and for those who dont know, a chiwawa is a small mexican breed of dog.

Question by Atlas22   |  last reply


The differnences between an big air ball tower ball and an motorized madness balmachine ball? Answered

I'm thinking of buying more knex balls at knexusergroup. The only balls I have right now are 8 motorized madness ballmachine/ loopin lizard balls. The one's at knexusergroup are the one's from the big air ball tower. So my question is: Are they the same and if not what are the differences? Thanks for reading this. -sathothy

Question by sathothy   |  last reply


Lesson One

Lesson One: Beginning Dragons are basically giant lizards with wings but you need to know that dragons have types. Darkness Light Holy Space Fire Water Grass Electric Wood Mecha Ground Dirt Air and Plain  Dragons also have deadly attacks and can kill if needed. That is why you never go close to a dragon. EVER. I did once and got a huge scratch. Also the types listed Aren't the only types. There are still more to be found. In the next lesson you will learn the most common tools for catching dragons.

Topic by Mplinnc   |  last reply


Use for dead cell phones

Is there any use at all for a discontinued cell phone? If there is please let me know. I have 3 or 4 dead cell phones and I don't know what to do.

Topic by BEAST14   |  last reply


What is a good animal that can live in a relatively big fish tank? Answered

My hamster recently died and I am thinking of getting another pet that will fit in the cage. I don't want  fish. I have only had a cat and a hamster ever so if the animal is for more experienced owners than don't suggest it. Also if it is an animal that is hard to care for could you tell me that from past experiences. Some of my thoughts are a type of snake, a type of turtle, a possible lizard, and any other reptile or mammal that is good for beginners.

Question by hungyhipo 2   |  last reply


How can I build wire frame animal and insect shapes?

I'd like to build wire frame shapes of lizards, geckos, insects and etc for lighting up at night. I've built a 4 foot gecko out of conduit tubing and fencing wire. It is very strong but was difficult to work with. I think there must be easier materials to work with. I've seen shapes made out of plastic filament, and then there are zoos that do the Christmas shows. Garden centers also sell the wire frame shapes for topiary. The typical size is going to be between 1 and 3 feet long. The material doesn't have to be hollow like tubing, it can be a solid like wire. Ideally, the material would be something I could heat up, bend to a design, then it would retain its shape when cool. A little flexibility is good but the design has to withstand being outdoors. Thanks for any tips.

Question by diode_tensegrity   |  last reply


my vacation to Orlando florida.

I went on vacatioto Orlando Florida I went to Disney world.I got some pictures now.1.this is me playing ssbb 1st day2.I saw a Chipotle on the way down to Florida 1st or 2nd dayon the 4th day we got to the Disney World camp ground3.once we got to the Disney world resort camp ground I caught a lizard and named him Alfred.4different view5.the next day we went to Disny world and this is the first roller coaster we rode it was so wimpy I could take pictures on it.6.then once we got in to tomorrow land we rode space mountain and wow was that a good roller coaster.7.on the exit of space mountain they have these cool animatronics(sp?) 8.later we went on over to go on buzz lightyears spin something like that and on the way there we saw him lol9.when we finished with tomorrow land we went to holy wood studios this is one of the coolest pictures I took there.10.this was in the line of the star wars ride where you were you go to Endor... but you don't your going to have to ride it to see what happens.thats all for now.

Topic by the_burrito_master   |  last reply