MSW Logo

Does anybody know about or use MSW Logo. Just wondering.

Topic by Finnly 10 years ago  |  last reply 10 years ago


Which Logo?

I want a new logo for my youtube. Which do you like best? These are all edited Jack White logos. 

Question by freeza36 6 years ago  |  last reply 6 years ago


Logo for this Group?

Hey, got any ideas for a logo for this group? I think it's a great idea to have a group; it should have a strong presence, and we should fill it with great instructables! I've attached an image as an example.

Topic by nagutron 10 years ago  |  last reply 9 years ago


Logo Contest

Hi! I know I haven't been very active, but I want to hold a little contest. ATTENTION: Logo makers needed. Prize: 1 YEAR PRO MEMBERSHIP I need a new logo. Mine is getting old and boring. I would like a knot theme, or anything with rope. Heck! I'll openly take anything related to the outdoors. So! Get your creative juices flowing, and make me a logo!! Post it in the comments!

Topic by ThatKnottyguy 6 years ago  |  last reply 6 years ago


Instructables Logo

Is there a file on Instructables that has the logo in its entirety? The top logo looks good, but the bottom of the hand is cut off. I was just wondering if there was somewhere to get the whole one. Thanks! Note: I'm not quite sure if something like this has been answered before, if so, oops.

Topic by Bran 11 years ago  |  last reply 11 years ago


Knit logos?

Hi there! I'm trying to knit a scarf for my boyfriend. I had an idea of knitting a Boston Celtics clover into it. His school colors are green, and he's a big fan of the Celtics, so the scarf is already green. I don't want to knit it using two colors, I'd rather alternate between knitting and purling so that its just a change in texture and its subtle. I've already found a great chart, but I'm not sure if it would work, like if the logo would come across well, or if it would look lie i just messed up the scarf. It would be fantastic if someone could tell me if this is a valid idea or even try it out.  I've included the pattern below, as well as one that i drafted up (its pretty much the same, but i shrunk the original so that it wasn't as tall or wide, but kept the same proportions) I'm using Yarn Bee; Effervesce in Forest, with a gauge of 18stsx24R for a 4" square (package says using size 8 USA [5mm] needles, but I'm using 5s to get a tighter stitch) http://3.bp.blogspot.com/-tKNzQ_5J1cE/TqcJ86SOijI/AAAAAAAACoc/W8j2OcSpGvI/s1600/celtics%2Bclover%2Bknitting%2Bchart%2Bv2.bmp

Question by Smalfrii 4 years ago  |  last reply 4 years ago


Official Instructables Logos

Occasionally Instructables authors ask for images of the robot to use in their projects. Here are some images, which are available for non-commercial use. If you have questions about image use off of the site, please contact us at service@instructables.com

Topic by seamster 3 months ago  |  last reply 3 months ago


LCD Brand Logo ? Answered

I have this lcd i need the manufacture but it only has a logo and i need to know the pins so i can hook up to arduino i have a pic of the logo i couldnt get a clear shot with camera but i made a pic of what it looks like i have

Question by MACKattacksnipe 8 years ago  |  last reply 8 years ago


Furry Group's Logo

Hey, my computer is being somewhat of a fishwife, and the files I'm uploading to instructables aren't coming out right. If anyone feels like giving us a new logo, drop me a line.

Topic by Kataze 11 years ago  |  last reply 3 years ago


"opened & fixed" logo

Hi everybody, I think it would be nice to have something like an "opened and fixed" logo. The purpose being to print it as a sticker, then, for example, when you open and fix an appliance, you can put the sticker on it, and when your friends ask, you can delight them talking endlessly about your endeavor. Irony aside, I think it can be an interesting counterpart to the "warranty void if removed" labels, also encouraging people to open and fix their own devices. There could also be an "opened and hacked" logo. I was thinking in something simple, like an "O&F;" with a circle around, or maybe the circle made of a screwdriver. I'm writing this due to my lack of design ability, in hope that someone with that ability finds the idea interesting enough to give it a try. Also, what do you think about it? is it a good idea? would you use it? Cheers, Andres. P.S.: If you think it's worth trying but nobody with technical skills shows up I can try creating a first version on Inkscape.

Topic by AndresAcena 3 years ago  |  last reply 3 years ago


i need a logo?

Question by scubachase2000 7 years ago  |  last reply 7 years ago


LED Matrix Logo

Hello, I am looking for help/advice with small project I am undertaking. I want to make a logo out of 50/60 single LED's as a gift to someone. I have attached a picture of the logo. Should I make it on a blank circuit board, what is the best way to connect the LED's (2.2V) and solder them, how many resistors are needed? Any information is gladly appreciated :)

Topic by EimearF 2 years ago  |  last reply 2 years ago


Should I Change My Group Logo?

My GroupShould I change my logo? Got any ideas?

Topic by Mace42 11 years ago


help, i want to make a glowing logo with mobile phone lcd backlight ?

I have an lcd from my old LG GW 300 and it was blank white, last month I was read tutorial how to add glowing logo like apple mac and it use lcd backlight from portable game console but i forgot to bookmark the address link and now i confuse what to do ? I just want to light up the backlight of my phone lcd, it has very tiny flexy cable and I dont know which one to use ? thanks :)

Question by rannur 5 years ago  |  last reply 5 years ago


What should I do next

Anyone have any Ideas on what I might do next for my profile picture?

Topic by iproberry1 7 years ago  |  last reply 7 years ago


Where can i get a hold of some instructables robot stickers?

Some stickers of the Instructables robot please :D

Question by Superbeast907 9 years ago  |  last reply 9 years ago


What's the Instructables logo font

Seems like an odd question but I'm just curious.

Topic by asasklfjklasfkljasklfjaklfsjkl 9 years ago  |  last reply 9 years ago


Who designed the instructables logo?

This yellow robot seems a little wired.. I really hope the designer can think a little bit more about the logo's style This website is so awesome, but the robot seems a little rigid  

Question by daisy90 4 years ago  |  last reply 4 years ago


is there anywhere that sells a keyboard or a keyboard key with the ubuntu logo instead of windows??

Is there one because i want 1 windows key and 1 ubuntu key

Question by GASSYPOOTS 7 years ago


What paint do I use to put a logo on a shirt that doesn't wash off? (No iron ons, I'm thinking of using a stencil.? Answered

I wanna make some logos for some shirts I bought.A radioactive logo for 2 yellow shirtsAn above the influence logo for 2 white shirts, 3 black shirts, and a jacketI want a paint or something I can use with a stencil.

Question by Keith-Kid 10 years ago  |  last reply 3 years ago


How do I put labels in a front panel?

I have made a multiconnections box for my computer that fits in a 5-1/4 bay. It has four USB ports, 1 Firewire, mic and earphones and several card readers. The front panel of the box is made of plastic and painted with spray paint to cover putty patches. I want to put logos for every connector, the USB logo, the Firewire logo, a logo of a mic, a logo of an earphone and the identification of each card slot (CF, SD, MS, etc) What are the ways of doing it with a factory-like finish? ¿custom decals? ¿Screen prints? ¿Is there any instructable about the matter?

Topic by jedikalimero 8 years ago


Wacthing a serie I foung instructables!!

I was wacthing blacklist and I found the logo!! can anyone tell me if this is casual or nott??? Greeting from an argentinan fan!!

Topic by npenna 4 years ago  |  last reply 4 years ago


iPhone 5s Stuck on Apple Logo

I've been trying to restore and update my iPhone 5s but its stuck on the Apple logo with the progress bar not moving. iTune is at the latest version and  I have tried different USB cables and still not working. Any idea how to fix it? I've waited for 6 hours and still no update on the progress bar.

Topic by Melbonene 3 years ago  |  last reply 3 years ago


Spark Productions Fourm Logo Contest!

Hello all Spark Productions Members! I am holding a contest that which will most likely change the Group Logo for Spark Spark Productions! This will require a picture made from www.ArtPad.com , then put onto www.ImageShack.us , and posted on the Colaboration Instructable. People that dont send in art will be judge's. Good Luck and Have Fun!-DDSN the LeaderEXAMPLE:

Topic by ddsn 12 years ago  |  last reply 10 years ago


Logo Carved onto human hair

Thought I'd share thisBoing Boing Gadgets' Joel Johnson was at McMaster University yesterday where he met a researcher who used a focus ion beam microscope to carve his school's logo on a human hairI find it amazing how well it came out. If we can do this now, just Imagine what well be able to do in the future! Advertisement spaces in hair?!!!

Topic by Keith-Kid 11 years ago  |  last reply 11 years ago


Would it be possible to make the mac logo on a Macbook into a flashlight?

Would it be possible to mod a Macbook to have an ultra-bright mac logo on the back that you could use as a flashlight? Is the backlight to the screen the same light that illuminates the logo?

Question by Z.Backas 7 years ago  |  last reply 7 years ago


How would you imprint a graphic or text onto a blank aluminium or stainless steel blank switch plate cover?

I'm making a pedal board/road case with a buddy of mine. It's in its early stages, but it will consist of a pedal board and lift-away lid, covered in tolex with metal corners and such. I'd like to put some sort of small name plate or logo on the front end of it. I've found a blank switch plate cover, normally used to cover up spots where light switches or power outlets used to be, and by some means apply a logo or text to it. It's about the size that I'd like the logo/text to be anyways. I guess I could go and print a sticker and call it done, but I'm looking for a way to make this more permanent. It will be on the outside of what is essentially a small road case, so it will be up against the elements. So I guess if there was a good way to print off a design and put a layer of something over it so it will stay in place, possibly be shiny ( :D ), and be protected from the elements, I'd be all set! For the sake of aesthetics I've decided whatever plate I get, it will be some kind of metal. I've found brushed aluminium, stainless steel, and chrome.

Question by 9 years ago  |  last reply 9 years ago


Instructables Member Cards!

Hi, gmjhowe here.Well i had eaten my sandwich early, and i was kinda bored during my lunch. So i decided to make full use of my work computer producing these lovely 'members card'I figured that we all love this site, and would be proud to carry a member card around. Also if you print many of these off they can be used as pseudo business cards, great if you want to give somebody a link to all your projects!I also have now added a generic card, for people to hand out that just has the normal web address on! (thanks skate for the suggestion!)Now, this is how it works, i have the full artwork files, done in Quark Xpress, anybody is welcome to have these, just PM me.Anyone else who wants one, just hit a comment below, listing how you want your name, the title you would like under your name, your 'member since' date, and your member page.Also add the image that you would like.I will reply with a comment, with a nice pdf file for you to print off and use!I will then work my way down the comments, first come, first served.Thanks again, Gmjhowe(ps, ive also included a .pdf file of my member card, so you can see what quality your getting)(pps, yes i am providing these file for free, it just might take a while to complete)

Topic by gmjhowe 10 years ago  |  last reply 9 years ago


Facebook logo appearing all over wall posts?!?

This is really weird, on Facebook, the Facebook logo is appearing in wall posts everywhere it says "some" or other random words.. Is this happening to anyone else??

Question by josh1324 7 years ago


I would love some help for a groovy logo for Etsy?

I have plenty of graphics of my own that I would like to use I just can't get a hip look!

Question by 10 years ago  |  last reply 10 years ago


How do you make superman logos with different initials in it?

Question by artsydarb15 9 years ago  |  last reply 9 years ago


Customize CASIO® logo from Calculator [REQ]

I want to change/customize/replace the CASIO ® logo flashed while turning off my fx-991ES calculator to make it more cool . I want to replace it with a desired word/letter like for example my Name or some initials. So please make this COOL instructable . The image of that Calculator screen flashing logo is attached to make it more clear what i wanted to say. Thank You...

Topic by SïÐdhèshS 3 years ago  |  last reply 3 years ago


A logo (mascot?) for all the grammar police out there!

I ran across this on the "I Can Haz Cheezburger" Web site.   It looks sort of like something Caitlinsdad might draw, but surely we'd have seen it here first!  I especially like the notations on the ordnance :-)

Topic by kelseymh 7 years ago  |  last reply 7 years ago


How do I put a logo on spandex? Answered

I've got a Robin costume made of a morphsuit, but I can't figure out how to do the R symbol and attach it. I tried a Nylon patch, but that kept falling off, sticking to itself, and crumpling up as I moved around. 

Question by Numbuh1Nerd 3 years ago  |  last reply 3 years ago


What process do I need to do to get my logo adhered to rubber?

I am trying to get my logo adhered to rubber, like the logo on the sidewall of a bike tire.  I have tried many different stickers and none stuck, there has to be something out there!  Thanks for any help!

Question by velozpark 9 years ago  |  last reply 9 years ago


how to remove screen printed logo from a velvet jewel box's outer surface?

Folks, need hands on for removing the screen printed logo from a jewel box, the surface is velvet. hardly waiting. best

Question by shinojmahe 6 years ago  |  last reply 6 years ago


My profile picture is lame. Help me be less lame, win 5 years pro membership!

I’m looking for an avatar/logo/awesome little chunk of artwork to represent me on Instructables and other places such as YouTube and my blog. I’m not very good with the whole art/drawing/creative logo thing so I need your help in making a recognizable symbol that I can love and cherish for years to come. I’ve seen some great stuff produced by Instructables members so I’m hoping you guys can work your magic on my avatar/logo/awesome little chunk of artwork. Some criteria: -I should be able to “remix” it easily by being able to switch out what it’s holding, changing the colors, add different headgear to it, etc. -I would like a simple, cartoon style logo. Though your intricate details and shading skills may be amazing, they sadly don’t have a place in my avatar/logo/awesome little chunk of artwork. -I would prefer if it didn’t have any words. -All work needs to be your own. I have the same Google as you and don't need you pulling stuff from there for me.  Some other members who have great examples of this are Kiteman (of course), monsterlego, and even the Instructables Robot himself (check out the Food, Outside, and Technology categories) Ideas Right now I’m thinking an octopus could be a cool thing because it has a lot of tentacles and it could represent the diverse projects I like to do but I’m open to any designs. You can check out my profile and Instructables that I’ve posted to come up with your own idea but I don’t necessarily want a logo that represents only LEGO or origami unless if it has a lot of potential for general use. I’m Here to Help If you have an idea but want to run it by me before taking the time to make it, just leave a comment and I’ll let you know what I think. Also, if you post a design I’ll leave a comment and let you know if there’s anything you can do to improve it and/or what I especially like about it. Any other questions that weren’t answered here are completely welcome as well. Conditions If your design is selected as the winner, you will receive a quantity of five (5) 1 Year Pro Memberships to Instructables. I will need a file of the design before the prize is awarded. The design will become my property, I will have all rights to it, and I will be able to use it in any way that I like, including altering it. Pretty much you will have bragging rights and 5 years worth of membership but the design will be mine.

Topic by sherrycayheyhey 6 years ago  |  last reply 6 years ago


My profile picture is lame. Help me be less lame, win 5 years pro membership!

I’m looking for an avatar/logo/awesome little chunk of artwork to represent me on Instructables and other places such as YouTube and my blog. I’m not very good with the whole art/drawing/creative logo thing so I need your help in making a recognizable symbol that I can love and cherish for years to come. I’ve seen some great stuff produced by Instructables members so I’m hoping you guys can work your magic on my avatar/logo/awesome little chunk of artwork. I'm giving you until August 17, 2012 to submit your designs and the one that I chose as my favorite will win the pro membership. Some criteria: -I should be able to “remix” it easily by being able to switch out what it’s holding, changing the colors, add different headgear to it, etc. -I would like a simple, cartoon style logo. Though your intricate details and shading skills may be amazing, they sadly don’t have a place in my avatar/logo/awesome little chunk of artwork. -I would prefer if it didn’t have any words. Some other members who have great examples of this are Kiteman (of course), monsterlego, and even the Instructables Robot himself (check out the Food, Outside, and Technology categories) Ideas Right now I’m thinking an octopus could be a cool thing because it has a lot of tentacles and it could represent the diverse projects I like to do but I’m open to any designs. You can check out my profile and Instructables that I’ve posted to come up with your own idea but I don’t necessarily want a logo that represents only LEGO or origami unless if it has a lot of potential for general use. I’m Here to Help If you have an idea but want to run it by me before taking the time to make it, just leave a comment and I’ll let you know what I think. Also, if you post a design I’ll leave a comment and let you know if there’s anything you can do to improve it and/or what I especially like about it. Any other questions that weren’t answered here are completely welcome as well. Conditions If your design is selected as the winner, you will receive a quantity of five (5) 1 Year Pro Memberships to Instructables. I will need a file of the design before the prize is awarded. The design will become my property, I will have all rights to it, and I will be able to use it in any way that I like, including altering it. Pretty much you will have bragging rights and 5 years worth of membership but the design will be mine. The deadline to enter is August 17, 2012. 

Topic by sherrycayheyhey 6 years ago  |  last reply 6 years ago


Making some threads (clothes)....helpz

Guys! My mother insists on me buying new clothes, but most of the stuff here is too gansta for my tastes, so i've decided to make some myself.I want some T shirts and maybe 2 or 3 jackets.oKay, so here's some of the stuff I want:An above the influence jacket. These are not sold.Some above the influence T shirts.I need help in the following things:How to make my own - Tshirts are easy enough, Ill just make some iron ons, theres ibles on this subject If I remember correctlyIts the jacket that worries me, I like the sort of jacket thats fuzzy on the outside. I would like to know if Iron ons would work on this fabric (I'll check what fabric it is later) Or if you know of any other methods.ALso, do you have any suggestions for logos that would make cool shirts?

Topic by Keith-Kid 10 years ago  |  last reply 10 years ago


Does the 2 second image of the contest logo count as part of the 30 seconds?

Im thinking no, but Im just wondering in case.

Topic by DJ Radio 9 years ago  |  last reply 9 years ago


How do I put labels in a front panel? Answered

I have made a multi-connections box for my computer that fits in a 5-1/4 bay. It has four USB ports, 1 Firewire, mic and earphones and several card readers. The front panel of the box is made of plastic and painted with spray paint to cover putty patches. I want to put logos for every connector, the USB logo, the Firewire logo, a logo of a mic, a logo of an earphone and the identification of each card slot (CF, SD, MS, etc) What are the ways of doing it with a factory-like finish? ¿custom decals? ¿Screen prints? ¿Is there any instructable about the matter?

Question by jedikalimero 7 years ago  |  last reply 7 years ago


Does any one know where to find this?

Does any one know where to find this backgroung in this video? If you do please leave a comment with the link to it. THX Charger_06

Topic by Charger_06 11 years ago  |  last reply 11 years ago


Updated 3D Model of the Instructables Robot!

Hey Everyone!Happy Friday!This week I uploaded our latest 3D model of the Instructables Robot to Thingiverse, in case you were looking for some inspiration for the Remix Contest ;) It's exciting to see how many people have already downloaded the model! Click here to grab the model, and be sure to tag us on Twitter and Instagram once you're ready to show off how you used this 3D model of our beloved robot mascot!Have a great weekend!best,audreyObscura

Topic by audreyobscura 2 months ago  |  last reply 2 months ago


Snowboard Paintjob

Well, after 5 cans of spraypaint, half a roll of painters tape, and about 4 hours of hard work, my snowboard is completely repainted! I am extremely happy with the results and it only cost me $20! Here are some shots of the top and bottom...first is the top and the second is the bottom. I have yet to try it out but I did use a few cans of that clear enamel on the bottom and about half a can on the top to make sure it's sealed really well. Also, I am going to apply a heavy coat of hot wax over the summer so it's ready for next season! I can't wait to use it!!

Topic by Electroinnovation 7 years ago


The little instructables logo thing next to the site doesn't appear!!

The little icon next to the website and next to the tab doesn't appear!!! It used to be some sort of orange circle..

Topic by Keith-Kid 11 years ago  |  last reply 11 years ago


stamping on leather

Hey I wanna stamp on leather i know how to do that but my problem is i wanna create my own logo for the stamp and i can go and buy a iron stamp so i can stamp on leather but then it is not my own logo so i wanna create my own logo on a iron stamp just like the picture below or something like that or is there a nother way to stamp on leather?

Topic by shat01 12 years ago  |  last reply 7 years ago


What type of PAINT can be used to paint over logos on denier polyester conference or tote bags?

You know those denier polyester shoulder or tote bags that you get from conferences or promo giveaways? I'd like to paint over the logos or text that were screen printed on them, making them more attractive and fun for everyday use (rather than being a walking billboard). What kind of paint adheres to the denier polyester and is opaque enough to cover existing logos/text and also does not rub/wash off?

Question by vicki94530 9 years ago  |  last reply 9 years ago


Rock Band Logo Font (W.I.P.) (Need Help)

Heres what i have so far. i spent 4+ hrs in MS Paint only. i need a font making program. anyone know a good one (preferably free or trial).

Topic by REA 10 years ago  |  last reply 10 years ago


Can i include logo pictures in my ible?

I was reading through the tech contest rules and saw this. My question is can i include picture such as this one in my ible if its entered in a contest? Also i my most current ible is a race car and all race cars have to be sponsored. so i was going to but hobbyking decals on it but I am not sure if doing so will disqualify me from the contests? Entries must not contain anything that is or may be: protected by copyright, trademark, patents, utility models, design patents or other proprietary right without the express prior written consent of the owner of such right.

Question by Team Dogoman RC 3 years ago  |  last reply 3 years ago


why is my ipod photo only shows an apple logo when i try to open it then fades?

I just do not know what to do with my 40gb ipod photo color. whenever i tried to open my ipod...an apple logo appears for about 10 seconds then little by little fades until it's gone. sometimes after the apple logo a battery icon appears... sometimes a folder icon...and sometimes a sad face icon. im confused about what is really wrong with my ipod. is there hope that it will rise again? could someone please help me with my ipod. thank you.

Question by ihatemyipod 9 years ago