Search for look in Topics


look at this

Look at this:http://youtube.com/watch?v=FaqmHe-gJso

Topic by ryan knexer    |  last reply


A New Look

Whoo-hoo! Seeing new and popular at the same time. What do you all think?

Topic by fungus amungus    |  last reply


look at this bug!

Look at this error:update: here is the message:org.hibernate.exception.GenericJDBCException: Could not execute JDBC batch update at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:103) at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:91) at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:43) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:249) at org.hibernate.jdbc.AbstractBatcher.prepareStatement(AbstractBatcher.java:92) at org.hibernate.jdbc.AbstractBatcher.prepareStatement(AbstractBatcher.java:87) at org.hibernate.jdbc.AbstractBatcher.prepareBatchStatement(AbstractBatcher.java:218) at org.hibernate.persister.entity.AbstractEntityPersister.insert(AbstractEntityPersister.java:2174) at org.hibernate.persister.entity.AbstractEntityPersister.insert(AbstractEntityPersister.java:2610) at org.hibernate.action.EntityInsertAction.execute(EntityInsertAction.java:52) at org.hibernate.engine.ActionQueue.execute(ActionQueue.java:248) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:232) at org.hibernate.engine.ActionQueue.executeActions(ActionQueue.java:139) at org.hibernate.event.def.AbstractFlushingEventListener.performExecutions(AbstractFlushingEventListener.java:298) at org.hibernate.event.def.DefaultFlushEventListener.onFlush(DefaultFlushEventListener.java:27) at org.hibernate.impl.SessionImpl.flush(SessionImpl.java:1000) at com.instructables.hibernate.SessionProvider.closeCurrentSession(SessionProvider.java:62) at com.instructables.filter.HibernateSessionRequestFilter.doFilter(HibernateSessionRequestFilter.java:94) at com.caucho.server.dispatch.FilterFilterChain.doFilter(FilterFilterChain.java:70) at com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:173) at com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:229) at com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:274) at com.caucho.server.port.TcpConnection.run(TcpConnection.java:511) at com.caucho.util.ThreadPool.runTasks(ThreadPool.java:520) at com.caucho.util.ThreadPool.run(ThreadPool.java:442) at java.lang.Thread.run(Thread.java:595)Caused by: java.sql.BatchUpdateException: Data truncation: Data too long for column 'body' at row 1 at com.mysql.jdbc.ServerPreparedStatement.executeBatch(ServerPreparedStatement.java:665) at com.mchange.v2.c3p0.impl.NewProxyPreparedStatement.executeBatch(NewProxyPreparedStatement.java:1723) at org.hibernate.jdbc.BatchingBatcher.doExecuteBatch(BatchingBatcher.java:48) at org.hibernate.jdbc.AbstractBatcher.executeBatch(AbstractBatcher.java:242) ... 22 more

Topic by coolz    |  last reply


What's with people saying that replicas "look like theirs"?

I've seen this happen a few times before.  Someone makes a replica of a gun, for example, an MP5K, and then a n00b comes up and says that it looks like their MP5K.  No sh*t sherlock? You two made the same freaking gun, of course it's gonna look like someone else's version.  Comments like this are pointless and should not be posted. And please Mepain, don't express your opinion on disliking replicas in general on here, we know already.  =P

Topic by DJ Radio    |  last reply


I wanna see a K'nex PS-G1!!!!!

LOOK AT TITLE! Here's a ref pic, it's mine.

Topic by DrWeird117    |  last reply


A new K'nexer!!!

Guys, 'specially you, Jollex. There's a new K'nexer out there. His user is rachat21. He's cool. He loves K'nex, so give 'm a warm welcome. He's a friend. Just do it. His page:https://www.instructables.com/member/rachat21Thanks, guys.

Topic by DrWeird117    |  last reply


What kind of Instructable should I make?

One of my goals is to make and Instructable that will be put on the home page. However, I don't know what to do it about. Would someone mind helping me figure one out?Also I don't know how to solder, nor do I have anything to use if I even wanted to solder anything.I am clueless when it comes to resistors and things like that.Thanks!

Topic by Sunbanks    |  last reply


Looking for Seamstress

I am looking for someone to sew an idea that I have. Please message me for further details.

Topic by The Cartographer    |  last reply


looking for games?

What is the name of the D&D; offline game. Looking for a D&D;  RPG in Oklahoma City area

Question by Pan Zer    |  last reply


Looking for a project?

Just a thought for anybody (in the UK) looking for an unusual project, there is a Sinclair C5 for sale on ebay right now. Currently at £100 with two bids.

Topic by Kiteman    |  last reply


Looking for relay

I have been looking for a relay that will switch with .3 vdc.  The other side is just a 9vdc source but the trigger has to be .3vdc or lower. thanks

Topic by zuben    |  last reply


New look

Who here likes the new instructable look? I like it. Yeah more color!!UPDATEYeah I agree we need some spring colors. Suggestions?Also the loading speed is like greased lightning now.

Topic by thejrb    |  last reply


looking for inspiration

I've got two old towers, four spare harddrives, an old handspring treo, old laptop, spare wifi card -- all in various states of non-use. looking for inspiration on what to do with this collection of hardware i'm not using

Topic by eriksays    |  last reply


Looking for a Mother!

I'm looking for a kombucha mother culture and maybe some starter brew to start my own batch! I live in SF. Anyone have some to spare? After my first successes, I'll have some to share too!

Topic by scoochmaroo    |  last reply


i was looking at this...

I was looking atthis and a while back i had a dream about stealing a four wheel bike and riding it down a hill, but the one in my dream had hydrolics and when i would go around corners i'd hit a switch and a front wheel would kick up and i'd hit 3 wheels around it. think they can make one with airbags or hydrolics?

Topic by Yerboogieman  


Looking into songwriting...

Okay, i thinking about starting to write my own songs. Anyone got any advice?

Topic by wingman246    |  last reply


Looking For Buttons

Can anyone please help me? I need Buttons (For a Controller/Arcade Cabinet) and I don't know where to get some. Thanks.

Topic by ddsn    |  last reply


Looking for designers

Milimeter studio has working on a 2d platform game and is looking for a few designers: - Art and graphic designer : with sample work, with strong hand drawing and full knowledge about an art program like Adobe Photoshop knowledge. - Frame by frame 2d animation designer: For motions of game's character : with sample work, with strong hand drawing. All of the Milimeter contacts (send files and etc) is via email address. So international designers from all of the world can work with Milimeter. Contact us: milimeter.ir@gmail.com

Topic by farzadbayan    |  last reply


looking for a laptop...

Im looking for a laptop, not just good but fast, alot of GB space, up to date (obviously), easy to use, not an apple laptop, i might download games but not many, need to be able to connect usb cables and memory cards, easy enough to move it around but not light, weight doesnt matter too much but nothing light weight that can easily break but will use it mostly for facebook, email, possibly webcam... most likely not though, writing documents, obviously need wifi (but i assume all laptops come with the ability for wifi) so... anybody know of any good laptops with most or all i want? and please dont be rude

Question by saiyankev    |  last reply


looking for an idea

Hi all,  I am not sure this is the right place to pist this but couldnt find any better place. so as the topic mentions im looking for an idea... you are probably asking idea for what? so here it goes  im volunteering as a high school mentor for the FIRST robotics competition. this competition is awesome for kids - building a robot from nothing in 6 weeks to do a changing task... this is difficult even for experienced engineers.  anyway, we want to teach the kids some useful things before the competition starts, such as working with power tools, sensors, some basic electric circuits and mechanical elements (bearings, sprockets, gears etc.) we tried lectures and classes but it doesnt quite do it,  so i thought a good idea would be a nice project that might combine all of the topics mentioned above. so where do i go when i need a good DIY project? instructables! i browsed around but couldnt find something that was exactly what i was looking for...  so can anyone help with an idea? 

Topic by sitzikbs    |  last reply


Looking for ideas?

I am looking for ideas here from all you "experts" (where an expert is described as - Ex (a has been) spurt 9 a drip under pressure)) Nothing like insulting the unpaid help! before they start :-)  happy New year everyone. OK A friend has a model of a fair ground ride, this is a steam yacht, http://www.youtube.com/watch?v=zp76RTbqqLk he wants to animate this and would like the motion to be realistic at the scale size. He had tried a number of mechanical solutions, cranks etc but they all give a jerky motion and the real thing is very smooth. Any suggestions. I am inclined to think this is a micro processor solution with either a suitable servo motor or similar driven to mimic the inertia of the real thing. ideas folks?

Question by rickharris    |  last reply


Looking for help.

I am currently trying to complete a project but cant seem to find anything that would work for it. I am trying to make a system that connects to a wire and on the end of the wire is a resistor of some size then it comes back to the box im trying to make and displays a light saying 1. for wire 1. Then move to the next wire and check it and it would display a 6 for resistor system 6(different size resistor for each number) . Check picture for better understanding... http://img.skitch.com/20101031-fhnufcw7axk1kesj7g4yq1qfrd.jpg

Topic by cheatcode1994    |  last reply


Looking for a thermostat

I am a science teacher and need help finding a thermostat to fix the department's water distiller. It looks very similar to the "Waterwise 9000 contemporary distiller" but is slightly different in appearance. The basic operation is you fill the reservoir and turn it on, the water boils and is then condensed and drips into the bottle that slides into the front of the device. When the heater reaches a certain temperature a thermostat turns on the cooling fan, when the device cools to below that temperature the cooling fan turns off. There are lots of warnings about running it without the fan because it will burn out the heater. I have tested the heater and it works fine, I can bypass the thermostat and the fan works fine, but the thermostat no longer switches on the fan. If I can find a replacement thermostat that should fix the entire distiller but it seems to be a custom order only for the manufacturer who wants you to buy a whole new distiller. Can anyone suggest an appropriate substitute? The code on the side of the thermostat is:  36tme02 22471 f150-15f p185-97 a0615 I found a similar image on the emerson site for a 36T thermodisc thermostat http://www.thermodisc.com/en-US/Products/Bimetal/Pages/36T.aspx Does anyone know how to figure out the switching temperature from the code from the side of the thermostat? Any suggestions are appreciated!

Topic by CitizenScientist    |  last reply


Looking for thoughts.

My PC wnt a bit wonky this morning.  Mouse pointer moved around just fine but the system wouldn't recognize any clicks. Well at first i could click on the web browser and open a new tab but that was it. I restarted the system and had the same problem. So i wasn't able to lick to log in. So i tried another mouse and got the same result. Then i tried both mice on different USB connection both on the front and rear of the system. No change. Out of frustration i slammed the mouse down on the keyboard tray a couple of time and then everything started working fine again. Any thoughts on what happened? I suspect it's an issue with the keyboard. Being a wireless keyboard that came with a wireless mouse i think the keyboard had something to do with it. I've had an occasion where the keys stopped working on the keyboard till i moved the receiver around a bit. oh well.

Topic by mpilchfamily    |  last reply


everyone look here!!!!!!!!!!!!!!!!!!!!

Everyone on instructables, do not change your avatar or go to change image and click update. you will lose your avatar. i repeat, do not change your avatar or go to change image and click update. you will lose your avatar. you have been warned.

Topic by dsman195276    |  last reply


New look! I'm lost! :D

There's a marketplace! and forums are categorised! at the moment I'm a little lost with the categories. =D It'll take a little getting used to.... :-)

Topic by ll.13    |  last reply


kfsa

The K.F.S.Ascraped knex fan side armversion-1.07 the first working model. to do list: Compact the trigger mech. Add a auto loading system. Talk to thedunkis for some more tips. Post on knexinnovation.net and instructables.comI have no date on when it will be done because i have to much to do.This is only so i can update the list and tell people how im doing on this project but you may discuss your upcoming knex builds and projects.

Topic by knexfan9182    |  last reply


Do Colleges look at Freshman year?

Do Colleges look at Freshman year? I'm just wondering cause I'm kinda freaking out about my english grade. I'm not sure what I have right now, but last marking period I had an 82%, and right now I've not been doing so hot. It's a weighted class (an "A" is a 5.0, a "B" is a 4.0, etc.). I know a "4.0" is perfect (but I'm starting to look at a "C" here, which is freaking me out), but perfect isn't so great anymore. I'm taking almost all advance/advance honors class (all my classes are weighted, except German 2 and some electronics course). Should I be freaking out?

Topic by guyfrom7up    |  last reply


Whoa...

Http://news.discovery.com/human/time-dilation-einstein-relativity.html

Topic by LoneWolf    |  last reply


Look at my instructible

Make money online

Topic by flintboy292    |  last reply


I'm looking for a ardunio? Answered

 hello instructables I am looking for a ardunio i live in cape town in South Africa  and i am not ok with buying 1 over the internet. I would be a lot happier buying 1 from a store. I've been looking for 1 for a few months now please help

Question by lj123456    |  last reply


Looking for website desginer

I am looking to create a website similar to the Instructables.com site.  Is there any similar software or advice where users could post images, videos and code for their projects?

Topic by dalich    |  last reply


look in to other PC?

Is there any software or ways to look in to other pc monitor? my friend sai there is an software where if we give an IP address mean we can see wat they are doing in their PC. thanks.

Question by arunguyz2    |  last reply


looking for design software? Answered

Hello, just finished a CNC router, im new to this, looking for some easy to use design software, doesnt have to do anything fancy, just needs to be compatible with mach3/kcam, im still a noob at all this, just looking to start out with making a few rough parts to try it out.

Question by kalboon    |  last reply


instructables new look

Ugh. I dont know about you guys, but i liked instructables old look. i know its kinda minute, but still... Is it just me who feels like this? is there even a way to change it back?

Topic by SonicDH    |  last reply


looking for a collcab partner? Answered

I need a collab partner for a secret project.

Question by altair ibn la ahad    |  last reply


knexmaster14 look here!!!

Http://creativecommons.org/licenses/by-nc-sa/2.5/legalcodeif you look there it shows my license to gavadangers knex 5 pound gatling gun instructable i made. the one that you plagerised .

Topic by dsman195276    |  last reply


Does this look right??

I want to link a few LEDs together and use the mains as the power supply (not batteries). Does this look ok? Any risk by linking them up this way? I want to use a 5V power supply Thanks

Topic by uuili    |  last reply


Looking for Used Lighter

Looking for used disposable lighters, preferably bic, for an art project for class about sustainability. Any size will work. please let me know if you have some I will be happy to pay for shipping.Best,Spins

Topic by jspins123    |  last reply


looking for a collab partner

Lookin for a collab partner to help me on my secret project a knex powerful semiauto non slingshot mauser c96. just looking for some to help me make a working mech.

Topic by altair ibn la ahad    |  last reply


!!!!!!!!!!!!!!!!!!Just look at this and respond!!!!!!!!!!!!!!

Will someone give me an idea or fantasy i can try to build out of knex because i have no clue what to build.

Topic by RunningBrave    |  last reply


looking for 1.5v LEDs

Anybody know where I can buy some LEDs that will work with a single 1.5v coin cell battery?  Thanks.

Topic by aliasjanedoe    |  last reply


come look around

I was advised by another member to invite people in forum to come look around my page and sites - I think if you go to my page website is listed there...gotta go run to the job job :( :( but feel free to stop in

Topic by originalsbykaty    |  last reply


Looking For A Bell Jar

Hello, I am a high school student from Boston, MA looking for a bell jar and corresponding stand/vacuum connection to conduct my experiments. I'm not looking for anything in particular, so long as it's not plastic (it will need to withstand some moderate electron bombardment). If you have anything, even if it's only something you can only lend to me, I am interested! Thanks! Xellers

Topic by Xellers    |  last reply


Looking At Other Profiles

Every time for the last few weeks when I go on the computer, I try and look at someone else's profile but I cant see their favourites, orange board, comments, etc but when I 'am using my Ipod, I can see their whole profile just fine with no problems.

Topic by Zombiekiller-93    |  last reply


Looking for Creative Collaborators

I just became an Idea Provider to a cool start-up that just launched in New York City. In a nutshell, OpenInvo is a unique online ideas marketplace that connects individuals from the creative fields with innovation seeking companies looking to increase their business value. Check it out: http://www.openinvo.com/

Topic by 18machine  


Looking for particular instructable

I'm looking for an instructable that showed how to build a curvy style shelf like that in Alice in Wonderland. It is similar to the one in the link below but had much more detail. I have a friend wanting something similar for their daughter and thought that shelf would be perfect but now can't find it. https://www.instructables.com/id/Curved-Cabinet/

Topic by B2Cobra    |  last reply


Looking for Electrical Engineer

The company I work for is looking for a full-time in-house creative EE. We design products for commercial and consumer applications.Here is our website:Griswold EngineeringWe need one innovative Electrical Engineer with experience programming electronics, as well as designing boards and circuits.Metro-Detroit area.Contact me if interested.

Topic by whiteoakart    |  last reply


What are judges looking for?

I'm curious about the judging process for contests. Most contests seem to have pretty loose rules and are judged without clear criteria. I put a lot of time and effort into my entries, and many of my instructables get featured, but I've only been a finalist once. If I knew better what judges were looking for, I could target my efforts better. Any suggestions, or could judging criteria be posted somewhere? Like are they looking for the most off-the-wall ideas, best photos, clearest explanations, etc.?

Topic by susanrm    |  last reply


looking for a 3rd admin

Hey everyone! I am looking for a 3rd admin to help bring some creativity to the table. This is for my facebook page  https://www.facebook.com/Electricreations?hc_location=timeline We dedicate the page to diy projects (mainly electronics but not limited to). Since I go to college I dont have that much time to keep the page flowing with updates. Me and my friend do our best but sometimes we lose track of time. Looking for someone with creativity and a decent amount of knowledge based upon electronics

Topic by out-of-the-box    |  last reply