Hey, I was wondering if I was allowed to make an intractable on adding a motion sensor to the Xbox 360. It is technically a mod.. And MSFT hates that.. Is it allowable? -n
Topic by neutrino15 | last reply
You play Minecraft and want to know how to install certain mod? I can show you how. First, comment the mod you want instructions on. Then, subscribe to me so that you can see the instructions. I already have instructions on a few mod so please check and see if I already have it. Thx!
Topic by kdbarnes
I will Mod Nerf Guns for you for increased power, cool looks...and you can request more so email me at firstname.lastname@example.org. You can choose to send your gun (you pay postage) or add the cost of the gun onto the mod cost. Thank you, more details can be discussed through email.
Topic by King monkey
Ook, so I realize there are a few groups that have to do with gun modifications. BUT, I couldn't find a FORUM for them, so I am making one. In this forum, we are to share our coolest, most successful mods of knex weapons here. If you are to describe a mod, you MUST include at least one picture, so we can all admire your handy-work.I'll go first. I recently (as in last night) built the mod of Jager's rifle from THIS IBLE and found the gun a bit faulty. Since it uses a lot of pieces, I was in no rush to dismantle it immediately, and rather, I tore its insides out and put my own in. The result is an enormous mod of a mod with a four-shot magazine for orange connectors with grays and a sleek look similar to the original mod.P.S. The picture is from a bad lighting/angle... the gun looks a lot cooler in person.
Topic by Oompa-Loompa | last reply
I've made some mods to Zak & Bakenbitz's SwagBoss. The mods include a better shotgun trigger (pull with your pinky!), cheek rest, better stock (my standard curved stock), bolt mods, and a craptastic sight mount. 1. Mine. 2. The shotgun trigger (ask for internal pictures if you want) 3. How I connected the pin guide (lol, but it works) 4. Stock 5. Cheek rest (held in by blue clips) 6. Bolt mods 7. Sight mount THE INSTRUCTIONS. BUILD IT HERE
Topic by Raikou-san | last reply
There are so many different nerf mods for ALL nerf guns, But the question is "Which one brings enough power to make a nerf gun shoot far and fast with better accuracy?" Answer is all them, if you put all the mods for one gun into one gun you are going to get a great outcome unless you do the mod bad, take a Recon CS-6 for instance it is a low power nerf rifle not good for wars at all shoots around 20 feet but, mine has been modified and i am currently looking for different modifications for it but it shoots more than 80 feet measured, exact results are 80 on most shots 1/10 shots shoots around 50 and that is because it was a BAD DART, here is what i did, (P.s: this will be a instructable for the mods in this....) 1 Removed AR 2 stretched out spring by plunger ( not recomended get a new spring if you can ) 3 put a spring behind plunger to create more friction which pushes the barrel forward more and causes a stronger air push. 4 made the air tube bigger by the AR with a drill Thats all i did it was easier than most mods i have done ( iremember the maverick i had no idea how to get into the roatating barrel) but it led to the best outcome, P.s doing the same thing makes the Raider CS-35 alot more stronger it will more than likely shoot 90+ I will be getting a longstrike soon so i will show you guys the AR Removal and other mods i know which can be applied to the gun and create another great Nerf Sniper Rifle, Later guys.
Topic by AirsoftTeam
Has anyone done the gameboy prosound mod or screen backlighting or underclocking, or would they be able to upload an instructable on it? I have found other articles on it, but there not very clear. I also have found a site where you can buy the kits to do these mods (ill post link when i find it) Thanks alot 8BITE P.S - If anyone else is interested in gameboy mods or chiptunes or anything gameboy related, please feel free to contact me, i dont bite : )
Topic by 8BITE | last reply
I have been looking at minecraft mods recently and I wanted to find a tutorial on how to make (not install) a minecraft mod. Naturally, I went to Google, but all the tutorials I found were how to install mods, not make them. So I ask you, community, to please present me with at least a decent tutorial on how to modify minecraft. (and not how to make a texture pack either)
Question by bighead5454 | last reply
I want to make a work table not for stuff like carpentry and hammering I need a table for modding nerf guns or making small things like my instructable (link at bottom) This table needs to some way to organizing tools and about 30 or so small materials If anyone knows if there's a good guide to making one or has any tips please reply Link to my guide https://www.instructables.com/id/How-to-make-a-bolt-action-BB-launcher-out-of-a-m/
Topic by ishmal1103 | last reply
My old DVD/amplifier's DVD is broken so i thought i would convert it to a portable amplifier with some more inputs and stuff, anyone know where i might find blueprints or something so that i might easier figure out what's what? it's a Centrum Triton 110, (sucks, but then it doesn't matter if i mess with it) thanks
Topic by brunotheman | last reply
Hey im trying to modify my cars radio to have an aux input using the CD players audio hookup to the main IC. i cant find any datasheets on any of these ic's if i had them i would be just fine. are the black wires that come from the CD player the audio signal wires? if they are could i easily just splice into that circuit?
Question by the_burrito_master | last reply
Has instructables ever considered featuring some of Mightycarmods videos/DIY's? They are getting more and more popular every day! If you haven't seen them, check out their youtube channel: http://www.youtube.com/user/mightycarmods?feature=chclk It's entertaining and very helpful and has saved me money so far! What do you guys think?
Topic by jmacman12
how do you put custom firmware on psp with ofw 6.31? i dont want to hardmod my battery and i dont want to buy a pandora battery, if i could i would softmod but i dont have a spare psp with cfw. if you know of a way to softmod please tell me no matter how difficult. i dont care if i have to use a magic memory stick or not. also i would like to avoid a brick.
Question by BIGHAIRYDUDE | last reply
I would like to mod a handheld radio (or even a analogue tv but radio would be better) to get to listen to higher frequencies than normally available. I'd Like to hit the 1420Mhz mark approximately but with little electrical engineering or architecture experience, I'm not certain how? Which might make a TV easier to get there as UHF covers that right? (still safer to play with a battery powered radio than a 240V powered one) I figured there is someone out there with the ability to figure out what components need changing? The variable resistor that tunes it perhaps? If you'd rather post an instructable I'll follow that or just tell me what needs replacing with what? Any Ideas?? Thanks
Question by Mr E Man | last reply
Ok so, after reviewing James Haskin's TALKBOX he splits the feed from his guitar amp through a DPDT switch and he mounts it directly onto the guitar amp.... I was wondering how difficult would it be to make a stomp box feature for this?? with maybe a few LEDs to let you know what your running.. i posted this as a question but being new to the site i'm not sure how that worked so i posted here too...
Topic by funkbass | last reply
My current Synthesizer has a very jumpy volume control, it has buttons, so it is either very loud or very quiet, And i need a smooth volume control. during one of my youth groups worship session, i was on synth and it went from quiet to loud WAY too quickly. so i would like to build a volume pot to output...but i dont know what the perfect requirements and setups are....any help on this?
Question by ski4jesus | last reply
Here is how to make your Minecrafting life much easier than it already is: This mod was created by Berkin and with his help I made this trailer. It's been well received by the community and reviewed by some big Minecraft channels to boot. Instructions and download: http://www.youtube.com/redirect?q=http%3A%2F%2Fwww.minecraftforum.net%2Ftopic%2F598851-173-cannon-mod-v17-smp-release%2F&session;_token=AKuQGt9jVpiIlrLQ6vqJwEPQGzx8MTMxNTE5MjQ3NkAxMzE1MTA2MDc2
Topic by DJ Radio | last reply
I have a Nerf Scout and a Secret Strike. I want to be able to get more accuracy and/or range on either of them. Also could someone recommend a really good gun, preferably with a clip, but doesnt have to be automatic.
Question by killerAP | last reply
This is the first random knex contest posted under its new host, me. I'm taking the operation over. Sorry I couldn't post it yesterday, but my house got broken into and under that commotion, I forgot. Anyways, the title is what it is. You can modify ANY knex design on the internet posted (with one exception see below). However, there are guidelines: Must Improve on original design. The improvements can be on performance, efficiency, parts conservation, whatever. However, adding random useless crap on a design is NOT acceptable. Must be original. The design doesn't have to be yours but the MODS you make to it do. The more improved the design is, the best chance you have of winning. Don't limit yourself to just guns, you can mod ANY design. The one design I will NOT allow in the contest is the TR since it is so open to mods and there is a variety of options for it. So keep that in mind. Accepted entries: Knex gun builder- Modded ZKAR bolt RC-1207SEV- Modded freeslinger Knexfreek- Freeslinger to tankbow transformation. Tigernod- OSNJCKMA2 mods (Can't remember the abbreviation) Edit- The winner is....Tigernod and his modded OSNJCKMA2. Congrats! Expect a patch soon Tigernod.
Topic by DJ Radio | last reply
My stampede stopped working after i took off the front orange barrel part i think its the batteries but i dont know help?
Question by taowyman | last reply
I have a pride scooter that was my fathers, the control box on the steering column has gone out for the second time. I want to hack the chair to make a cart for my kids , it seems to me that one could use a foot pedal off a power grinder to by pass the safety laden devise on the column, any ideas?
Question by doctorbigdaddy | last reply
Ok so i have a micro mosquito and I finally got the repair kit for it (I crashed and burned hard.... broke a rotor) I love the little thing.....very fun to kill 15 minutes with... I've done some looking and I've come up with a few ideas on how to increase power in the tail rotor and make it a little bigger....to hopefully make forward and reverse flight a little faster.... if I am succesful is there an interest in this? would it be wanted as an instructable? also... I realize its not a load bearing helicopter..... but any ideas on ultra light cameras I could try out?
Topic by chaoscampbell | last reply
SR-v2. Minor mods to stock, handle, handle to stock to barrel connections, and slingshot. There are orange connector w/ Y-Piece connections from the handle to the stock, as well as from the stock to the barrel. I will post a picture detailing where if you like. Enjoy.1) Gun2) Slingshot mods.3) Stock mods.4) Connection/handle mods*.*See the small bit on the bottom to the right? It's a bunch of red connectors. Note how it's attached. You can use this to make the entire barrel. It's quite sturdy, just a but of weakness when it twists.
Topic by DELETED_Gilrostwo | last reply
I know I have started a lot of threads lately, and I apologize, but this will be my last thread for a few days.http://triadplanet.orgThat is my website. It is looking pretty empty now. I would LOVE to add content to it, but I need some help!I am searching for 5 people who would make good admins. Below I have included a list of needed skills to apply:-Moderate Amount of Free Time-Love of Games, Geekery, or Development (of any kind)-Basic HTML knowledge-Ability to copy/paste HTML text to add to front page-Devotion to the internet-Ability to write articles and post messages-Maturity and restraintI am also searching for 10 people who would make good mods. Below I have included a list of skills needed to apply:-Moderate Amount of Free Time-Love of Games, Geekery, or Development (of any kind)-Basic forum knowledge-Basic phpBB knowledge-Ability to modify forums-Ability to write articles including stickies and announcements-Maturity and restraint-Devotion to the internet-A partridge in a pear tree.If you are interested in signing up, please PM me here, email me at email@example.com or post on my forums! You don't need all the above skills, but the more the better! I hope to hear from some of you soon!-Murdok
Topic by Murdok | last reply
Can anyone leave me a mod for the tech target, maverick, or firefly except the cpvc mod? Also for darts? I also wanted to ask how to get camera pics onto library. Otherwise, I can't tell the nerf maverick mod no one knows about! I just need that help, and some nerf mods and links. Thank you.
Topic by Fenderpony | last reply
Hey guys!Just thought i would share some NES mod links with you. You probebly know them, but there's got to be someone out there that dosen't.Raphnet EnglishRaphnet FrançaisNES Alarm ClockNES PortableNES info/patents etc.NES Mod's BlogNES R.O.B pc controlledTen mod's for the NES controllerNES mod's linksOk' that's should do it.. You should be able to find most mod's in the last link.P.S I really recommend the first link!
Topic by Silas | last reply
I was wondering if anyone had made a new alien vs humans one you know AVP AV-P =AVH mod on counter-strike 1.6 and if so I could find it. I wasn't asking for the skin stuff? but the actual gaame mod thingy. Like with waepon skins things and sounds. Please reply!
Topic by kenexinator | last reply
MAKE THIS believe me u will like it...hopefully lol long story short it is designed to b as good as i can get it the new mods allow for interchangeable grips a slide can easily be attached w/out any body changes the firing pin is stronger than ever w/ less friction than ever which equals more power try out the mods for yourself and as always be safe and have fun! thanks guys Zak inspired trigger mod is the final pic...it is a must have mod! -thanks Zak
Topic by Knex Lego Maniac | last reply