GoPro Mounts

I'm new to the world of GoPro and was wondering, where are some good spots to mount the camera, other than the helmet?  It would help to know, also, that my main use for it is snowboarding.  Your help is greatly appreciated!  

Question by FrodoandSam 6 years ago  |  last reply 6 years ago


Wrist mounted...

I need some help. I need ideas on how I would make this. Basically I want to make a wrist-mounted pistol (fake).   If you've seen Assassins creed before, they use a hidden blade that is spring loaded. Also this was in Sherlock Holmes (professor). What I want is is to sit on my wrist and when I push a button behind the pistol, it ejects it forward so i can grab it. I apologize if I'm not being clear.

Topic by Serdano 6 years ago


How to Mount that ? Answered

******************Disclaimer *************************** So first Of all........ only positive answers...... no negative sentence ...... questioning my ability ,Knowledge , "Right Tools" comment in bio....... if you want to answer , answer ...... i'll thank you........... if you want to comment on me...... sorry but i don't want that stuff......maybe i am a loser.... maybe science is not for me........ but budd i Don't need your advices. (i am pointing to an old man in the community , who does nothing else than to insult others.. sorry old man but i don't need your help.... every other person who wants to help is welcome.....) ********************************************************* So the question is....... that i am about build a pc......... i searched lot of cabinet's onn web...... and ended up deciding to make my own...... and as i searched for diy cabinets i found a wall mounted pc...... i understood everything in that tutorial...... except for one thing...... how to hang that thing on wall....... should i use screws or any kind of mount........and are screws "safe" to hold my costly pc (actually it ate up my whole year's pocket money.). and if so , haw many i need...... what precautions i need to take . ? and one thing more....... what are those rod's called which are holding the glass on the case ? 

Question by _Boltz_ 2 years ago  |  last reply 2 years ago


looking for motor mounts

I'm wanting to attach a few motors to a wood frame; however I'm not sure how to go about doing this.  The motors I'm using are in the picture; you'll notice their really isn't any holes to attach any mounting brackets of any kind.  I was thinking of using a 3/4'' pipe clamps, but was wondering if anyone here has any advice or experience with this.

Topic by Spaceman Spiff 6 years ago  |  last reply 6 years ago


how to mount an image? Answered

How do you mount an image using daemon tools

Question by 9 years ago  |  last reply 9 years ago


DIY Swivel Mount

We don't have swivel mounts here. I need one to hold my notebook+monitor while I'm in bed. Is there any instructable on this? Can you make one if not? I need one that goes up and down, right and left. Right now my monitor is useless as I'm in bed most of the time and I can't use it while I'm in bed. Thank you.

Topic by jaja1990 8 years ago


Mounting an LCD Monitor

Hello everyone! I am working on project that involves mounting a 19in LCD monitor onto a board. The monitor has 4 threaded holes in the back for mounting onto an arm or wall mount. I was wondering if anyone knows what kind of screws to use or has any advice on properly and securely mounting the monitor. The monitor is a Westinghouse 19" LCD. The whole project is going to be a small entertainment center for my monitor. I am going to attach speakers and accent lighting. I am doing this for a class project and drafting it in Vectorworks. *If anyone is interested in looking at the plans I will send them to you; however please don't redistribute them. They will be in DWG format. GC

Topic by genericcomment 10 years ago  |  last reply 9 years ago


Longboard Wall Mount?

Right, I need some help... My bedroom is really small so I want a way of having my longboard mounted on the wall to save on some floor space, the only issue is that I need a way of having it hanging vertically on the wall but i would like it so I can see the paint job on the bottom of it and so the wheels don't marl my wall. Any ideas or suggestions? thanks

Topic by TJParmenter 6 years ago  |  last reply 6 years ago


Gymnastic Rings mounting?

I'm trying to think of a good way to mount my wooden rings I made. I'm thinking of something like the design in the photo. Its made of 1" angle iron and square tubing and would be atached to a 12"x6" joist that is visible in my house. The metal is welded together Through the hole in the bottom  would put an eyebolt and bolt it in. I welded a nut to a large washer for the support under the tubing and I would use a washer and two nuts on top to help prevent it from loostening. I'm thinking of using lock tight on the nuts. Any suggestions? If I should post more views tell me and I'll render more views. I'm not going to be doing anything crazy, like giants or bails, mainly strength, like crosses and planches/?multicies?.

Question by snowluck2345 7 years ago  |  last reply 7 years ago


Surface Mount LEDs

I need almost 200 SMLEDs for a project. However, I only want 6 colors of 36 each. If anyone wants to buy the extra 300, or something like that, please make an offer. I will get 6 from this list, but I need them all to look different enough: White Red Orange Yellow Lime Green Green Blue Green Blue UV Or, if anyone knows a place where I can buy them in small quantities, please let me know :-)

Topic by zachninme 12 years ago  |  last reply 12 years ago


Using a mounted drill to power axle mounted device

Hi, I have just constructed a chicken plucker as in the photo. As an initial attempt the device worked really well - except for the connection of the drill to the axle. This was not well aligned so it ate the threaded bar which was trying to pull itself out and not helped with the thread direction. Are there examples of how to better power such a device?  I would like to be able to re-use my drill, I suspect properly aligned would work better. I could also swap to a non threaded bar but would need suggestions on how to keep the plucker barrel in place. Cheers

Topic by expatty 5 years ago  |  last reply 5 years ago


Anyone an Idea how to mount something on a Wall without screwing Holes ???

Has anyone an idea how to mount a fold-away table on a wall without drilling holes in the wall ? The problem s that the wall is a chimney. It will be mounted with two hinges so that you can fold it up. Sorry but I cant explain it better. mfg Daniel

Topic by homunkoloss 11 years ago  |  last reply 11 years ago


moving across the country-need some kind of camera mount.

I'm moving across the country. I'd like to make a video consisting of short clips every single stop we make, but I need a way to make sure I get the exact same camera angle every time I set up the camera. Camera angle to include some of the U-Haul, whatever is in the immediate vicinity and my wife and I, dancing of course. Any ideas?

Question by kurtquinn 9 years ago  |  last reply 9 years ago


Name this thingamajig

Hi I'm trying to locate or build something I don't know the name of and searching around hasn't proved helpful, perhaps somebody here could put a name to it so I at least know what I'm searching for?  It's a mount which allows something to rotate  horizontally a full 360 degrees  continuously (similar to the column rotation on a tripod) however the object to be rotated needs cables passed to it through the mount unhindering the rotation - some sort of contact connection?  Ideally I want the mount to have a powered rotation but putting a name to this would get me on the right track. Thanks in advance. Garrett

Topic by garrettlynch 7 years ago  |  last reply 7 years ago


how to build a x-ray view box?

I would like to build a x-ray view box. I think it is similar to a light box for photography.

Question by drstephob 10 years ago  |  last reply 10 years ago


iPod touch mount for tripod?

 Looking to mount a new Apple touch on a camera mounting bracket. So ... no gooseneck extention -just a sinple right angle bracket of some sort. I might be over-thinking this - but thanks for your assistance!

Question by clintbradford 9 years ago  |  last reply 9 years ago


(SOLVED) Mounting Slide Potentiometers

I need help for a project I am soon to begin work on ('ible coming soon). It will involve several switches and potentiometers mounted on a piece of hardboard. The switches and rotary potentiometers I have all have washers (or whatever you call the hexagonal things with screw-like threads on the inside) to secure them in place. The slide potentiometers don't. My question is this: How would I mount the slide potentiometers? Thanks in advance, ~H4ZZ

Topic by __DELETED__ 8 years ago  |  last reply 8 years ago


Custom spare wheel mount?

Just wondering if there is an article on building a custom mount for your spare tire, ours (under the truck) broke and we normally just lay it down in the back, but that can make storing other stuff harder, I'd like a article on how to make a custom mount. Thanks :)

Topic by CraigSnedeker 9 years ago  |  last reply 9 years ago


Proper way to "mount" a bearing?

I'm not really sure on the proper way to mount a bearing. I had a few ideas on how to do so, but I want to know what your methods are, or which of mine are the best. Images are attached. In most of these methods, there's a little collar on the bearing. I didn't discover till recently that most bearings don't have those.

Topic by cvxdes 11 years ago  |  last reply 11 years ago


iPod Touch Rail Mount

Hey!I got a Roland V-Drum kit last year and there's an aux input for mp3 players. I use it with my iPod touch to play along with songs.My problem is, I rest my iPod on the control module and not only does this then block half the controls, but it sometimes falls off with furious drumming.So I though to myself, I wonder if I can buy a rail mount so I can have a cradel attatched to the stand. I knew you could buy motorbike iPod cradels, but all of these weren't wide enough to accomidate the 35-40mm diameter of the stand. So I thought about making one.But I can't come up with any ideas.The stand I have is this:http://www.woodbrass.com/images/woodbrass/BATTERIE+DRUM+ROLAND+TD+9+KX.JPG(not the drums though... I wish)The rail mounts I have been looking at are like this:http://www.mountguys.com/ProductDetails.asp?ProductCode=RAP-274-AP4&click;=21Any ideas guys?

Topic by Tibboh 10 years ago


UV Surface Mount LEDs

I am currently modifying an iBook G3 so that, among other things, it will be fluorescent orange. Currently, when the computer sleeps, a white LED illuminates through the casing. Since the casing will now be fluorescent, I would like to replace the white surface mount LED with an ultraviolet one, so that the case will glow as the computer is sleeping. I was wondering if someone could help me out by telling me where I might be able to purchase an ultraviolet surface mount LED? P.S. The image included will be stenciled and mirrored on each side of the apple on the top of the iBook.

Topic by Ora 11 years ago  |  last reply 11 years ago


Need a DSLR Car mount

browsing for parts, thinking about resting it on the window itself. just looking to see if anyone has any type of ideas? This is pretty much my plan at the moment but I have to find parts for it. http://i.imgur.com/FrIGm.png But with this plan I for see 2 issues 1. The arm would most likely swing from side to side when speeding up or slowing down 2. If you wanted to record the driver, the window has to be down for this plan so wind would seriously be an issue. You could solve the first issue by using 2 arms, but windows are curved so.. im not so sure about that.

Topic by Ampix0 7 years ago  |  last reply 7 years ago


Custom Droid Radio Mount

So I am the happy new owner of both a Moto Droid and a 2000 Jeep Wrangler. However these two products seem to show no love for the other, at the moment in order to both charge my phone and play music through the car speakers I am required to go through a very awkward series of steps and entangling wires that seem to be bent on strangling me. As an avid lover of customizing my own items I wondered "is there a way to make this simpler?" and realized: screw simplicity, I can make it WAY more awesome! And so my endeavor began. The Droid media dock can be interfaced into a faceplate in which you drop the Droid on it then slide it to the left, plugging in the phone into both the audio and the power. To the left of this is a smaller panel with the LED readout of what station the tuner is set to for when the radio is set to AM/FM, along with a volume dial, seek buttons, and buttons that switch the input between Aux, Cd, AM, and FM. The issue is I am a programmer at heart and have very little experience in electronics, I wrote out the binary circuitry with little to no problem, my problem is that I don't trust my novice skill when it comes to the calculations for volts and amps being received at parts of a circuit. I think this is a ridiculous project and is way more complicated than it should be, and that is why it is awesome and needs posted on Instructables! Once building really begins I will take lots of pictures and make a formal write up to put up! Thanks everyone for reading this rant/plead for help!

Topic by XCabooseO 8 years ago  |  last reply 8 years ago


Hard drive won't mount?

So, I've had a toshiba 2.5" SATA 250 GB internal HD for a while now. I got it from an old toshiba laptop. I finally got an enclosure for it, and I plugged it in. windows made the sound it makes when you plug something in, and in device manager the usb port said a usb mass storage device was plugged in, but it didn't show up in my computer, nor did it show up in disk management. I searched the net for hours trying to find the problem, reading about how you might need to assign it a letter in disk management, and other more "grim" outlooks on how it might be dead. I listened to it closely, and heard it making very VERY soft ticking noises at a regular rate. I immediately thought the worst, and came to the conclusion that it was dead. The next day, I decided to take it into school with me, as my teacher was pretty smart when it came to computers, and maybe she could provide the tiniest shred of hope. She asked me to plug it into one of the school's desktops. I plugged it in and...it began running like normal. It showed up  on my computer, and showed the correct disk size, as well as a document I'd put on there long ago. I couldn't believe it!  When I got home, I plugged it into my computer, but surprisingly encountered the same problem. I decided to do a bit of experimenting, and I started plugging it into various computers we had around the house, and lined up all the facts I had: It didn't work on my laptop. (runs windows 7 home premium) It DID work on my mom's laptop. (also runs windows 7 home premium) It didn't work on my old desktop. (runs windows xp home edition, but I don't trust it. It's been acting very weird lately) It DID work on my school's desktop. (runs windows 7 enterprise) It DID work on my sister's laptop. (runs windows 7 home premium) I was stumped, to say the least. Can any of you tell me WHAT THE HECK IS GOING ON?!?!?! The strongest lead I have is that it might not be working correctly on my computer because the usb ports can't provide enough power to mount it. But if my laptop can't mount it, why should my mom's or my sisters be able to? Please provide any other theories you may think are plausible too! 

Question by tylervitale 6 years ago  |  last reply 6 years ago


DASH BOARD MOUNTS FOR CAMCORDER?

Hi...Members of Instructables.. I need a Dash Board Mount for my JVC EVARIO camcorder. I want to mount this Camcorder for recording what is happening in front of the car while driving. Even I am ready to purchase if the suitable mount is available with any members. Appreciate your feed back. Thanking you Lakamsani

Question by GRLAKAMSANI 8 years ago  |  last reply 8 years ago


wrist mounted flame cannons

Should i post an instructable for this?

Topic by budsiskos 10 years ago  |  last reply 10 years ago


Creative framing / mounting photos

So I have some photos that I would like to print out and mount similar to the way they are in the attached image. Any ideas or advice on how best to do so? I'd like them to be on solid blocks of wood, and kind of like, sealed in and to the wood. Very sturdily mounted, almost like wheat-pasted. The only thing I've thought of so far was using casting resin, but I'm afraid it would eat thru the ink and paper... Also, any other ideas for mounting and hanging photos that are beyond actual 'frames'?

Topic by dozen 10 years ago  |  last reply 9 years ago


kayak pvc engine mounts?

Hi i saw a lot of videos in you tube about the kayaks engine mount but they don't tell measurements or anything can you please help me if you have it something with a diagram so i can follow it thanks.merry christmas

Question by EdgardoL3 1 year ago  |  last reply 1 year ago


Homemade ROV camera mounting

I'm looking to set up a homemade ROV (probably using the SeaPerch or Seafox designs) and was wondering if anyone had successfully mounted a camera onto either of these systems. If so, I'd really appreciate it if you could shoot me a message. Thanks!

Question by gmaynard 6 years ago  |  last reply 6 years ago


Mount a bike motor to a surfboard

I was wondering if anyone would have any advice on mounting a 50cc bike motor onto a surfboard? I don't really have any power tool, but I might be able to grab a few simple ones; Was thinking this might be a cool way to get around town instead of investing in a car or just hooking it up to a bike. oh and is there any factors to consider in a surfboard when making this? Or should I make more of a really large skateboard type of thing and just mount everything to that? Thanks!

Question by Mailmetothemoon 3 years ago  |  last reply 3 years ago


Solar panel mounting and tracking.

I have a new video about equatorial mount for solar panels. If equatorial mount is turned slowly at the right constant speed, then the panels point at the sun all the time. I also have a diagram about something to get that constant slow speed. I have it done this way to avoid wind damage. I think if you did it this way and had a sump pump to pump the water back up every morning the thing could be  automatic, cheap  and very accurate. Brian

Topic by gaiatechnician 9 years ago  |  last reply 8 years ago


Articulating LCD mount arm

I've been searching for a diagram or and instructable that will help me build one of these things. It's really frustrating because I need one so bad, but buying one would cost me upwards of $100 and I dont want to spend that (unless I'm making one for myself).

Topic by milo126 12 years ago  |  last reply 7 years ago


Desk mounted hifi amp? Answered

So I've just moved back from uni, and have encountered a couple of relocation problems - my beloved turntable won't fit on my shelves. So I'm planning on keeping it on my desk, but there's another problem, the amp that goes with it (Technics SUZ11) is shallower than the turntable, so if I stack them, the turntable is very prone to skipping from vibrations in the table (even if I just move my laptop a bit). So what I was thinking, was put the turntable on the desk, mount the amp underneath, have a joyously neat workspace? :)  I was looking at this instructable:. There are vents on the top and bottom of the amp, so airflow shouldn't be a problem, but I am worried about the weight (and ripping the mounting screws out of the table). I'd probably be sticking it on a cheap IKEA desk, which is made like this: Table top: Height 4cm Top: Fibreboard, Acrylic paint Frame: Particleboard, ABS plastic Filling material: Paper Bottom: Fibreboard Is it likely that I would encounter any problems? Or are there any other suggestions on how to do this? I've seen some CPU racks which  hold the unit in place with heavy duty straps, but these all seem inordinately expensive...

Question by clairey 7 years ago  |  last reply 7 years ago


Mounting stuff on the Roomba Discovery

I keep seeing instructables about how to make stuff out of an irobot create, and got jealous. When my uncle got bored of his roomba discovery, he gave it to my grandma, who gave it to me, because she knew that I wanted it. When I got my hands on it, I searched through those Instructables vividly, hoping to find something to do with it (other than clean my house), but they were all for the create! So, I was wondering how I could mount something on top of my roomba. I also want to be able to program it. I found some sort of port thing underneath a cover on the side, I'm not sure if that's it. Finally, I want to know where I can find the cable that may or may not connect this port to my computer. Thanks.EDIT: I added some pictures.

Topic by YummyPancakes 10 years ago  |  last reply 9 years ago


How to mount Peltier elements?

A peltier is a element that gets very hot on one side, and very cold on the other side. Cold enough (with enough power) to make frost all over it. So. I got one, I want to make nice cold cold air. I read wiki, if you don't heat sink it, it will self destroy. If I heatsink the cold side, then a fan on the heat sink to blow the cold freeze air, will it be fine? Or must I cool the hot side too? Peltiers are cool :D

Topic by Killa-X 11 years ago  |  last reply 7 years ago


Mounting Lenses On Your Microscope

I found a broken cell phone with it’s camera and wondered if the lens could be used as a microscope objective. Image A shows the lens and it’s mounting with the CCD. The back of the lens is shown. The lens is about 4 to 5 mm in diameter. The starters from florescent lights make good lens holders. Image B shows a starter along with my modifications to hold the cell camera lens. The starter tube has 4 slits along the length so it can be compressed to fit the turret of the microscope. Image C shows it mounted on the turret. Image D shows the resulting view of a feather. It’s quite bad. Image E shows, for comparison, the view through an ordinary 20x objective (.40 NA). Here are some more lenses that I tried: Lens from a discarded flatbed scanner..... Very good! Lens from a 8mm movie camera...... Fair. Lens from the laser pickup of a discarded CD player..... Almost worthless. To take pictures through the microscope, I used eyepiece projection with a wide angle eyepiece. The lens on the camera was set to wide angle and maximum aperture, with a remote used to trigger the shutter. The camera’s LCD was used to focus and adjust the image. The camera’s autofocus handles the rest. For even illumination, be sure to center the objective lens over the substage condenser.

Topic by ShutterBugger 8 years ago  |  last reply 8 years ago


GoPro Scuba Cylinder Mount

Hi there, I'm new here. I've recently found an entry-level 3D online modelling software, Tinkercad and have been Tinkering ever since. I'm into scuba diving and I've long wanted to design a GoPro mount for the cylinder to give a 3rd person view of me while I'm swimming about enjoying life underwater. (Think a less-sexy Lara Croft!) I wanted to run it past you guys to see what you think. I've attached 2 screenshots, because as you can see, the mount I've designed is collapsible, to save space in my GoPro bag. I've done the maths (Pythag) so each side is perfectly lengthed to create a right-angled triangle, with the hypotaneuse (long edge) is facing down my body, towards my feet, so that the camera view won't be obstructed. I've used a Pythag triple, so the arms measure 3", 4", 5". This was done for 2 reasons: a) It was easier to desine using these measurements and b) I don't want it sticking too far up from my cylinder so that it doesn't catch on wildlife/coral/divers. As this is my first GoPro mount that I've designed, I've had to go on deimensions I've found online for the actual hinges. I've settled on approx 3mm for each prong as well as the gap in between. I have actually shaved off .25mm from the middle prong of the 3-pronged-hinge, and left the 2-pronged-hinge at 3mm for the gap and prongs. I'm going to get the pieces 3D-printed by a local service I've found on 3DHubs.com, either in ABS plastic or in resin, though I'll probably go for ABS as it seems to be a bit more hard-wearing, even if it's not so detailed. In terms of mounting it to the tank, I will use 2 headstraps, with the over-the-top strap removed from each one and glue the plastic bits of each of them together, at the correct length of course. I would join them using a seperate piece of plastic and either a hot glue gun, superglue or even some sort of epoxy, whatever lasts longest in prolonged exposure to seawater. I would probably place it nearer the top of the tank, near to where the strap of the BCD jacket goes round it. Does anybody have any advice for me in terms of the design from a functional point of view as well as from whether they think it would actually get a good shot on the camera please? I look forward to your feedback, good or bad!

Topic by JackIsted 2 years ago  |  last reply 2 years ago


GoPro Scuba Cylinder Mount

Hi there, I'm new here. I've recently found an entry-level 3D online modelling software, Tinkercad and have been Tinkering ever since. I'm into scuba diving and I've long wanted to design a GoPro mount for the cylinder to give a 3rd person view of me while I'm swimming about enjoying life underwater. (Think a less-sexy Lara Croft!) I wanted to run it past you guys to see what you think. I've attached 2 screenshots, because as you can see, the mount I've designed is collapsible, to save space in my GoPro bag. I've done the maths (Pythag) so each side is perfectly lengthed to create a right-angled triangle, with the hypotaneuse (long edge) is facing down my body, towards my feet, so that the camera view won't be obstructed. I've used a Pythag triple, so the arms measure 3", 4", 5". This was done for 2 reasons: a) It was easier to desine using these measurements and b) I don't want it sticking too far up from my cylinder so that it doesn't catch on wildlife/coral/divers. As this is my first GoPro mount that I've designed, I've had to go on deimensions I've found online for the actual hinges. I've settled on approx 3mm for each prong as well as the gap in between. I have actually shaved off .25mm from the middle prong of the 3-pronged-hinge, and left the 2-pronged-hinge at 3mm for the gap and prongs. I'm going to get the pieces 3D-printed by a local service I've found on 3DHubs.com, either in ABS plastic or in resin, though I'll probably go for ABS as it seems to be a bit more hard-wearing, even if it's not so detailed. In terms of mounting it to the tank, I will use 2 headstraps, with the over-the-top strap removed from each one and glue the plastic bits of each of them together, at the correct length of course. I would join them using a seperate piece of plastic and either a hot glue gun, superglue or even some sort of epoxy, whatever lasts longest in prolonged exposure to seawater. I would probably place it nearer the top of the tank, near to where the strap of the BCD jacket goes round it. Does anybody have any advice for me in terms of the design from a functional point of view as well as from whether they think it would actually get a good shot on the camera please? I look forward to your feedback, good or bad!

Topic by JackIsted 2 years ago  |  last reply 2 years ago


VESA Mount for 24" Monitors ... design request

HI folks. Just wanting to see if anybody had a good way to mount some computer monitors. I'm in the market for two 24" monitors (widescreen) that I want to mount side by each vertically (not using the original mounts that come with the units, as they only go horizontal). Since VESA mounts are standard, I thought there could be a way of putting them onto something behind my desk so that they just fit that way. Any ideas?

Topic by BeeRich 11 years ago  |  last reply 11 years ago


Is there a common standard for mounting servos to other things? Answered

For exmple - is there a standard bolt pattern or splined post that you have to consider when working with a servo or does it vary? Thank you!

Question by DanShort 8 years ago  |  last reply 8 years ago


Recommendations for mounting a 2.5" HDD in a small space

Hi, I'm currently trying to put together a small computer. I have a very limited space in which I can fit the motherboard and a few other components. Most of it kinda fits, but i'm not entirely sure how to mount the hard drive. The HDD is a 2.5" one like this one, with those dimensions: L:  100mm W: 70mm H:  8mm And once I exclude all the space taken by the other components, i have about that much space to fit it in (including the mounting parts): L: 170mm W: 40mm H: 75mm See the attached illustrations I made to get a rough overview of the space in the box. Note: I can technically extend a bit out vertically (height-wise) as the cover has a bit of gap inside but probably no more than an extra 15mm. The drive has screw holes on the sides and on the back (cf. the linked WD page) so there's a couple of options there. I'm not really sure how to go about this. I may be able to salvage some metal mounting parts from an old desktop but I would have to do some cutting to it and I don't have much room to move around for the mounting part. Another of my concerns is it'll be difficult to attach/remove the drive if I need to, because the bottom screw will be very hard to reach. Maybe there's a way to make a mounting rack where one part slides off to make the screws more accessible, I don't really know. Do you guys have any suggestions? How would you go about this?? I would much appreciate any tips, suggestions or even comments. Thanks Ben 

Topic by ben_dog 7 years ago  |  last reply 7 years ago


Yo-yo

Hello, I have been trying to do the trick Boing-E-Boing for a while now, but I just can't get the split-bottom mount right. Whenever I swing it around my finger, it just bounces off the string instead of staying on it. Could someone help me?

Topic by PineapplebobTheGreat 11 years ago  |  last reply 10 years ago


Limiting Switch? Answered

I don't have time to do the research right now, but I am going to make a projector mount that comes out f the ceiling, does anyone know how to set it up so that when it reaches the bottom the motor auto stops. It will be a two way switch, one for up position and one for down position.

Question by jj.inc 8 years ago  |  last reply 8 years ago


Quick SMD question

I am just getting into SMD work for PCB's & I was curious when I am using the electric skillet method for solder reflow does the PCB have to sit on the skillet itself or can it slowly pass over & the heat that is coming up from the skillet still cause the solder to flow like it would sitting on top.

Topic by sofiadragon1979 5 years ago  |  last reply 5 years ago


Is it possible to surface mount a through hole component? Answered

Question by codestroy7 7 years ago  |  last reply 7 years ago


Ideas on how to mount an iPad to a child's wheelchair?

Does anyone have any ideas for how to mount an iPad to a child's wheelchair...also making sure it is adjustable to be able to get the child in and out of the chair?  Also, any ideas on how to attach a stylus so that it doesn't get dropped or lost? As you can see from the picture, the way we have it isn't working out so well.  Thanks in advance!

Topic by mom2maddy 8 years ago  |  last reply 7 years ago


What is the least destructive way to mount something that will hold about 100lbs?

I'm building a bike mount in my dorm room. I found that with our top floor high slanting ceilings that I fit the bike above with out bumping my head into it, or having it get in the way at all. The tough part if mounting it to the ceiling while still be able to repair the holes when I move out. My bike is angry at me that I leave it out in the rain all the time! Thanks for the help!

Question by barnes 9 years ago  |  last reply 9 years ago


Has anyone out there changed motor mount (top) on 2003 Ford Focus with the 2.0L SPI engine?? The dealer wants $500.00?

Focus motor mount swap I'm looking for info on changing the top motor mount on a 2003 Ford Focus with 2.0L SPI engine. I have a Haynes repair manual which is of no help.

Question by geopan81 8 years ago  |  last reply 3 years ago


Best way to attach non vesa monitor to monitor stand.?

I purchased a monitor and realized that it does not have the VESA standard holes in the back.  Does anyone know of any way to use it in a normal monitor stand type configuration such as http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=4521948&csid;=ITD&body;=MAIN#productresources.  Could you use a product like JB weld or Gorilla glue to just glue a mount to the back or is there a standard type solution out there?

Question by mattbliese 8 years ago  |  last reply 8 years ago


taking the stand off of a dell 1702fp monitor

Hello,I have an old dell 1702fp monitor.Anyone ever take off the built in stand. So it can be wall mounted?here are some shots of the monitor:http://common.ziffdavisinternet.com/util_get_image/0/0,1425,sz=1&i;=8422,00.jpghttp://www.overstock.com/Electronics/Dell-1702FP-17-inch-LCD-Monitor-Refurbished/1706006/product.htmlhttp://www.pacificgeek.com/product.asp?c=232&s;=1910&ID;=88518&P;=Fthanks on any help

Topic by gregdove 10 years ago  |  last reply 10 years ago