Search for necklace in Topics

Paracord necklace?

I would like to make a paracord necklace that uses only one piece of paracord.  If you have any ideas please SHARE! Thank you.

Question by Goalie1    |  last reply

steampunk necklaces

Hi i was wondering if any one can link me to a tutorial on how to make a steampunk style necklaces for guys to wear plzz thanx dude

Topic by king_killer    |  last reply

Little Camera Necklace

Hello everyone, So here is the deal, I wanna make a necklace that has a little camera inside that can shoot small videos, just for those moments when you wish you had a video camera, so you just happen to be wearing one. I thought about buying one of these: and adapting with the following tutorial. The main problem I am seeing is that I want to keep all the electronics towards the back of the necklace, with just the camera at the front. That means I need to extend the ribbon cable which looks extremely tricky, and I dont know where I would buy one from. Does anyone have any ideas on this? -Derek

Topic by djrobotfreak  

Mistake on Mala necklace

Hi! I just finished a Mala necklace and realized I put the spacer beads in the wrong place. How do I go about fixing it without having to re-make the entire Mala necklace. Any help would be so appreciated. D

Question by Dombrenn1    |  last reply

Barbie Tit Necklace

Ha, got yer attention with that subject didn't I?But it's true. Check out Margeaux Lange's site for more pictures. These are strangely gorgeous...Clearly she's got the jewelry-making skills to do a top-notch job but I think someone with as much imagination but less metalworking skill could do a reasonable imitation.

Topic by rachel    |  last reply

does anyone know what oil is used in making grain of rice necklaces?

There are necklaces that consist of a tiny vial with a grain of rice in them with usually your name written on them. They suspend the rice in a clear oil. I was wondering what oil is used. Thanks!!

Question by phenixa    |  last reply

Where to get a vacume tube necklace? Answered

I want to make a necklace#

Question by nerd7473    |  last reply

How to attach stone to necklace like this?

Greetings, Does anyone know how to attach a stone to a necklace like this? What are those metals? Thanks

Topic by NeuroPulse    |  last reply

How to attach stone to necklace like this?

Greetings, Does anyone know how to attach a stone to a necklace like this? What are those metals? Thanks

Question by NeuroPulse    |  last reply

necklace out of tee shirts or jersey fabric?

I would like to learn how to make a long, thin necklace out of jersey fabric. It can wrap around multiple times or be a single strand.

Question    |  last reply

Beaded necklace with bound neck section

Hi all, I've got this necklace that I'd love to recreate. The neck section appears to be bound with cotton, and the rest is strung with beads. Is there a tutorial somewhere for something like this? Cheers!

Topic by jarris    |  last reply

(How) Do You Cut a Necklace Chain?

I bought a chain for a necklace at Wal-Mart that's significantly bigger than I need. Should I cut it? Can I cut it? How do I cut it? 

Question by Numbuh1Nerd    |  last reply

Project: Nicolas Cage necklace!

So one of my favorite things ever is Nicolas Cage. A friend at work told me I should put his picture in a locket and I 1-up'd her. I can't wait to wear it to work and dance around in front of her. :D The necklace is make of the body of an old watch that I completely gutted. The necklace is one of those memory wire chokers you can get really cheap at craft stores. I cut the picture out of the paper case that came with the special edition of Ghost Rider. I'm pretty excited. I wanted to post it, but I didn't know that it would qualify as a slideshow. What do you think? I'll probably just leave it in the forums. :P

Topic by jessyratfink    |  last reply

How to make a beaded necklace like this

Hi all, Another beaded necklace topic (sorry!) but I was wondering what tools/equipment/technique/materials I would use to make this sort of thing. I notice some are knotted, but generally I'd like to know how to make more complex patterns either knotted or unknotted. Any simple patterns/books, I'd love to take a look. Cheers!

Topic by jarris    |  last reply

CIY: Bold Flower Necklace

Growing up I use to love playing with Play-Doh.  Something about the color, the texture, and the smell.  Oh, the smell… I remember I use to play with this contraption that I would attach little people to, that had holes in the tops of their heads.  I would crank a lever and the little people would grow Play-Doh hair.  I had hours of entertainment cutting and re-growing hair.  Ipad what? Oh, how entertaining kids has changed. I never imaged that I would get the chance to play with clay again in my thirties.  To create my Oscar de la Renta look I decided to grab some clay and go to town.  Unfortunately this clay did not have the Play-Doh smell I remember, but I still had just as much fun creating with it. Click here for the full tutorial!

Topic by happy_creating    |  last reply

how can I make a vacuum tube necklace? Answered

I want to know so I can make one and where do i get one.

Question by nerd7473    |  last reply

are there any cheap metals that will melt at body tempature other than gallium. if not does anyone know a cheap source?

Im looking for a liquid metal to put in to a vial which will be on necklace that im giving to my girlfriend for her birthday.  i was wondering if anyone knew of a metal other than gallium that melted at close to body temp.  thanks

Question by wonton    |  last reply

What should I use to make a necklace out of a coin?

I wanted to make a necklace out of my lucky coin, but i cant seem to find anything that tells how to do it without making a hole or soldering to the coin. i was hoping someone could point me towards a method that wouldn't destroy the coin so i could keep it hole and solder free.

Question by coldpsyco91    |  last reply

Help me make Owl Talon Necklaces!?

I have recently come by 2 very fresh and very real Owl's Talons. Theyre about 4-5 inches long and look really awesome. I want to make necklaces out of them, preferably with them grasping/holding a stone of some sort. The problem is I have no idea how to do this since these are real. I dont know much about taxidermy at all or if its totally necessary here and I'm not sure how to clean them either. I'm also not sure how to set the toes to make them grasp anything. Basically I dont know the first thing about this project and need all the help I can get. Plus its for a girl so I will really REALLY appreciate everyone that helps me out. :) Here is an image of the talons, I hope it makes things easier. (also if there is any question about it, no i did not go out and kill some poor owl)

Topic by krelnius    |  last reply

Necklaces, Journals, Candle Holders and Paintings!

I make all kinds of fun stuff out of hemp, polymer clay, CD covers, etc! Check out my site for pics and descriptions ---> http://thickneckarts.etsy.comFree shipping on most items! Mention this ad and get 25% off!

Topic by thickneckarts  

Need help building gift for girlfriend(LED necklace)

So, Valentine's day is soon to be here. True, it is little early to be thinking about this, but the erly bird gets the early worm. So, anyways, I came with a schematic for an LED based necklace. The whole idea is that it consists of a symmetrical shape split into two halves, each an individual necklace. One of those two contains an LED and the other a battery, and when the two are placed together, they complete the shape and the LED lights up, symbolic of her being my other half.What I need help with is how can I build the contacts for the two halves and how do I actually build the two parts(what material to make them from, how to shape them, etc..)Much appreciated. hanks in advance, Usf

Topic by Usf    |  last reply

Elegant Pearl White Bridal Necklace Tutorial

I have included this necklace on my DIY Beading Club Membership Package for the Third Month Lesson Plan along with a bunch of tutorials. We've created this necklace to match the Elegant Pearl White Bracelet. We'll also  be including it on our Lesson Plans for future months. If you're a member you'll exclusively receive 5 tutorials every month. For your first month of membership you'll receive 10 tutorials.  Visit here to join. You can also check out what we have for members on the first, second and third month. 

Topic by diylesson    |  last reply

How do you perfect bottle cap necklaces...

My daughter and I are trying to make some necklaces for her friends.  We are having 2 problems that are occurring.  1. after we glue the picture inside the bottle cap.. we wait about 10 minutes to let glue set then pour resin on top... after several hours of the resin starting to dry  the pictures start to lift up.. 2. we are having problems with the colors bleeding.. espicially if there is white involved... the colors seem to dull! How long does it normally take for resin to set? Please help! Thanks so much! Mom and Katie!

Question by purepanache    |  last reply

Ideas for Men's beaded jewellery. Answered

Anyone got ideas for Men's jewellery. For example, what kind of beads, style, etc. I am kinda of bored making just plain cord necklaces. Thank you

Question by beadydani    |  last reply

look at this bee necklace WHO CAN MAKE IT

As the title said, it's from MCQ, my brother want to make one to send to his g friend. How can he make it? (metal is difficult to control, oher materials may be better I think)

Topic by Miss Puff    |  last reply

i need help with a very important project [deadline: 21st of January 2014] ?

I need ideas, help, suggestions anything that might help i am trying to make a small 12mm x 9mm necklaces that will light up when a with certain 1in x 1inch watch is within 15 - 40 feet of the necklaces  and the closer they are the brighter it will glow I've looked at wireless power doesn't seem to go far enough with how small I need it so if anyone has a any ideas at all that would be great the most helpful thing would be a schematic I can do the shop and electrics I just need schematics even if there not small or big enough they would still be helpful

Question by tykora    |  last reply

what thing could make an item open by just coming near to it?

Help! I'm trying to make a necklace that lights up when i come near to it... My plan is to attach a LED to a small glass ball and give it to my wife so that when i'm near it lights up. I thought of a remote that uses Bluetooth although i don't think a receiver can fit to a simple necklace, and i actually don't have any idea how to make a remote.

Question by secretsecret    |  last reply

I want to make necklace that will last 1,000 years... Answered

I like to carve bone and wood, and I was wondering if there is a carvable material out there that will last for a long time. Possibly something inorganic, like a plastic. The material needs to be carvable, colorfast, waterproof, and pretty strong. Any ideas? I've though of Corian, but I hear it's quite brittle.

Question by nepheron    |  last reply

Can a silver necklace be used like Colloidal Silver ? Answered

Collodial Silver (silver ions in suspension - usually water) is supposed to have antiseptic properties. Do you think it would be enough to simply place a piece of solid silver jewellery into water to get more or less the same effect - even if the item was left in solution for, say, a week or so? Thanks.

Question by kevinhannan    |  last reply

Whipping style knotting - boars tusk necklace - help please

Hi, I'm trying to create a type of whipping/knot to attach two boar's tusks together like the one in the attached picture and am looking for a photo tutorial on how to do so (I found how to knot the necklace part) I'd really appreciate any pointers, websites, books you could recommend. I've looked in quite a few knot books, and the closest I've seen is the "moku whipping" but there was no photo tutorial. Not even a written one (though I'm miserable at following written directions anyway). Any help would be appreciated! TIA!

Question by magpieshoard    |  last reply

Jewellery made from both silver and gold.? Answered

I plan to make (ideally through lost wax casting) a (fine) silver necklace pendant with (fine) gold lettering. I have made items using this process out of both metals, but have never combined both metals in the same piece. How would I go about doing this? Thanks in advance.

Question by alexhalford    |  last reply

Leather forming/embossing

Hi all, Curious how this necklace has been achieved. The description said the links are leather. The designer also does a lot of embossing with leather but this one is puzzling me...

Topic by jarris    |  last reply

Ongoing Tutorial Giveaway

I'm giving away a free tutorial for this necklace, Boracay Palms Necklace! To get the free tute all you have to do is to put up my shop banner for on your website, leave a comment at my blog with the url of your site with your email ad and I will send the tutorial.   Here is the code which you can paste it at your website:  and here is the blog post where you leave your comment, url and email: Hope to see you guys there! Cheers!  Jane 

Topic by diylesson  

(newsletter) T-Shirt Necklace, Cardboard Lumber, Arduino Trumpet...

Sign-up for this newsletter: Welcome back! Get in the Garden Contest - Enter any Instructable with a gardening theme and win a very cool computer-controlled indoor composting machine from NatureMill! Art of Sound Contest - Share any sound or music-related Instructable in our new contest and win an incredible custom hi-fi tower set with subwoofer or monster speakers! Get the LED Out! Contest - Enter any Instructable that involves LEDs, and win some amazing lights from Monkeylectric! Closes for entries this Sunday night! Results: Earthjustice United States of Efficiency Contest winners and Mother's Day Contest winners! LED Hand Lights Cupcake Cones Cardboard Lumber Recycled T-shirt Necklace How to Paint Clean Lines Simple Music LED Light Show Duct Tape Tear-Away Scratch Pad Sturdy Handle with the Portuguese Sinnet Any Instructable with an LED can be entered! Sound Graffiti Arduino Trumpet Collapsable Table for Concerts in the Park! The Worm-A-Rater Win a cool computer-controlled indoor composter! Win these custom hi-fi speakers! Solar Pool Water Heater Quick makeup FX with Silicone-based Pastes Analog Sound Synthesis Birth of Man Mixing Board Sign-up for this newsletter:

Topic by fungus amungus  

single wire LEDs - why don't they exist?

Because such a thing would totally solve my LED jewelry problems. I'd love to able to just solder an LED onto a necklace chain without needing to slice the chain. So why can't I? Curious.

Topic by aliasjanedoe    |  last reply

Terracotta can it be fired in the microkiln?

Okay I see these small microkilns it is a kiln for the microwave, mostly used for fusing glass, making glass jewelry, but at ceramics daily I saw a post that said you could fire clay in them, now I know that terracotta is an earthen clay, I make terracotta pendants for essential oil it's just a small necklace for difusing oils on a necklace. but using air dry clay the don't last long and are so brittle so I need to fire them, and use them unglazed so just firing them. I can't find not one person to answer me I just want to be sure it can be fired in one before I purchase. Thank You so much!

Question by lynnfm    |  last reply

IR remote control color change LED - how small is possible?

Hi.  You know those LED candles and such that come with a remote control to change their color?  I'd like to do this with a necklace.  I'm wondering how tiny a light and receiver set-up can be?  Thanks.

Topic by aliasjanedoe    |  last reply

Making bead jewellery

Hi Guys,  Ive just joined this site. I was wondering if there are any other jewellery making people here, I love making bead jewellery, bracelets and necklaces etc and am always on the lookout for good places to find items and instructions etc, and just chatting to people about their hobbies.

Topic by hefalump    |  last reply

My featured instructable is not in the featured pages

I noticed that my recent last instructable "journal necklace" is been featured but didn't end up in the featured instructables page. And two instructables that I published just a little later and were featured after did…is there something I can do? Thanks to anybody for the help!

Topic by marcellahella    |  last reply

I consumed the stuff in mood rings. Is it toxic?

I was biting it as I always do(very attractive) and it broke it my mouth. The plastic covering came off and I consumed the inside on accident. Will I be okay? I know it doesn't matter if it touchs skin but this is diffrent because I swallowed it. HELP ME

Question by Jollystar1023    |  last reply

hemp belt, is it possible to make one using the square knot method? Answered

As the title states, is it possible to make an extremely long hemp bracelet/necklace into a hemp belt? As in, my belt just snapped on me, and I have no money to buy a new one. So would it work by making one?

Question by foxy1paco    |  last reply

Who likes this and did i pay a good price?

Who likes this i payed $25 with tax its etched on an old core 2 duo did i get ripped off is it cool? i plan on turning it into a necklace.

Question by loppy96    |  last reply