that piece is this?

Eu quero  construir um  Arduino  e preciso de um  regulador de tensão  entre as peças  que eu tenho esse  é o mais  semelhante ao  que  encontramos  na internet

Question by ualbuquerque   |  last reply



how to cut knex pieces??? Answered

I wil cut a orange connector but how??

Question by cool bas3   |  last reply


I need suggestions for board game pieces...?

 I'm making a board game,and I can't think of a way to make the little pieces...? The characters..? What ever they're called...the part that you move around on the board..  I've thought of a lot of things..pipe cleaners, cardboard, wax, and a lot of other dumb ideas.  Does anyone have any suggestions..?

Topic by kelcylane   |  last reply


Some guns I built, with no special pieces

I enjoy building Knex guns for fun occasionally, but the only I dislike about the designs here are how many special pieces are required. I don't mean like exotic or cut pieces, but like Y joints, ball and sockets. I have like only 2 joints -.- I know you can get most of these online, but the fact is it's a hassle. So here are a couple original designs I made myself. Comments? The first is a just a front loading pistol I built mainly for looks, it's suppose to be a Desert Eagle replica.  The second is an Oodaammo pistol that holds 12 shots. 

Topic by holymush332 


Favorite Art Pieces

What's your favorite art piece?

Topic by puffyfluff   |  last reply


Guess the Pieces contest!

Https://www.youtube.com/watch?v=ujG-N3goqKgHello, So recently, I’ve finally finished counting all the pieces in Convolution. I thought it might be a cool idea to make a contest about it. There will be separate categories with points awarded in each category. The one who has the most points wins! You are allowed to give ONE guess for each of the categories. Here are the categories and the scoring system for each one: 1) Grand Total: Guess the grand total of the piece count. The closer you are, the more points are awarded. If you are within 50 pieces, you get 10 points, within 100 you will get 8 points, within 250 and 6 points are awarded,  within 500 and 4 points are awarded, within 1000 and 2 points are awarded, and within  2000 1 point will be awarded. 2) Most Common Piece: Here it is simple; just give your guess of the most used piece/part in the machine, and the amount of times it occurs.  You will get 2 points for guessing the correct piece/part, and another 2 points if you are within 50 of the amount of pieces used. 3) Least Common Piece: Just as simple as the second one, guess the least used piece/part in the machine and the amount of times it occurs.  2 points will be awarded for the correct part/piece and another 2 points if you correctly guess the amount of times it is used. 4) Price Total: In this category, simply give an estimate of what you think the price of the machine would be if you were buying it piece by piece from the K’nex website.  Prices are based firstly on the K’nex website, and if the piece is not found there, the price will be based on the price of the K’nex User Group. Prices are calculated in USD. If you are within $25, you will get 6 points, within $50 and you will be awarded 4 points and within $100 and you will be awarded 2 points. For reference, my room measures 2.28m(7’6’’) high, by 3.65m(12’) by 2.74m(9’). Also, here are some pictures and the video for reference as well. Video: https://www.youtube.com/watch?v=ujG-N3goqKg Best of luck to everyone.  The contest deadline will be February 10.

Topic by koolcoasterkid   |  last reply


Piece List Please? Answered

I would like a piece list for the Big Ball Factory please, no hurry.

Question by TwistedParadox   |  last reply


What is this Lego piece? Answered

I found this in my Lego collection and I don't know what it is. Any help appreciated.

Question by JM1999   |  last reply


Knex piece names

It gets annoying when making an instructable, you find that you need. 5 black clips or 30 grey clips, and so on. can some one get together a proper set of names for all those little pieces that no one can describe?

Topic by I_am_Canadian   |  last reply


Joining carpet pieces

I'm looking for ideas on how carpet pieces might be joined together into a whole (e.g. rugs made from carpet samples). The gaffer tape solution which is posted all over the web in tutorials isn't strong, only lasts a few months and doesn't work well with small carpet pieces.  I've successfully sewn carpet piece in the past with fishing line (so the stitches are strong and invisible) however this technique only works well with larger pieces due to the time it takes and amount of work.  Has anyone here tried any other techniques and been successful with both large and small carpet pieces?  My other idea was to use wood glue to glue the pieces to a hessian sheet.  I haven't tested this but the hessian base on most carpet pieces should merge well with the hessian sheet. thoughts or ideas appreciated.

Topic by garrettlynch   |  last reply


One Piece braiding?

Does anybody know how to Brade using one piece of material with 2 slots cut into it? I saw instructions on this years ago but don't remember where.

Question by gockers   |  last reply


How to use this piece Answered

Well looks like a digital player, I've tried to attach a battery in various terminals but nothing happened even short-circuit, furthermore wanted to know how to do it lyrics

Question by ualbuquerque   |  last reply


What is this lego piece? Answered

What is this piece? it is two by two platforms joined by a span roughly 3 cm and flat like a baseplate, meaning there's no interlock mechanism underneath. The plastic looks like glow in the dark plastic.

Question by aaron.kuhlman.9   |  last reply


that piece is this? (image, electronics) Answered

Well, I wonder what electronics part is that I have, seems to be an integrated circuit progamavel, found her in a radio circuit.   It is written: SAMSUNG S603V S1A0426CO2-SO          KD8025G And I would like to know how to search on the internet specific parts like this

Question by ualbuquerque   |  last reply


Piece Efficent SlamFire

It is what the title says. And I designed it. Here is a link. https://www.instructables.com/id/Project-SlamFire-With-Video/ If you are too lazy for that, here is the shooting video.

Topic by CorgiCritter   |  last reply


Game pieces for life size Operation game

This is for a halloween carnival and will be used over and over again, so I would like for it to be fairly sturdy.  I thought of cutting insulating foam and using it, but it would probably break easily.  Other ideas I have had: bondo plastic styrene sheeting (yard sign material) cardboard plastic dip (dip foam pieces in it?) great stuff foam I would like for the pieces to be white, fairly sturdy, about 1" thick or so.  Nothing is jumping out at me as inexpensive and durable. Thanks for any help!

Topic by mhammond schaetz   |  last reply



Parachute Cord

How do you join two pieces of parachute cord together? We've tried burning them with a lighter. That didn't work too well. Thanks!

Topic by debrald   |  last reply


classic car parts

I'm looking for old car parts. Grills, fenders, hoods, headlights, anything external. Not wanting to pay to much, but reasonable.  tell me what you have and send me a few pictures!  I live in the southwest Michigan area.  Thanks!

Topic by elliot5445   |  last reply


Looking for Specific K'NEX pieces!

Hi there, I'm looking for 2 specific pieces for my next K'NEX Slave I Starfighter project. The pieces are: - 2 times K'NEX Fluorescent Ball Half (http://www.knexusergroup.org.uk/acatalog/info_K90973.html), will be used as thrusters - 2 times K'NEX "mini missile launcher" (not listed as individual item), will be used as weapons for this build. Images found in attachments The Ball-half appeared in the following sets: - K'NEX Apollo-15 Lunar Lander, set number #13147 (only 1 piece) - K'NEX Saturn V Rocket, set number #15122 (two pieces) The miniature missile launcher appeared in the following sets: K'NEX Mech Warrior mini series 1 & 2: "Firefly" #11148" "Uziel" #11146 "Vulture" #11142 "Hollander II" #11152 "Thor" #11144 "Uller" #11150 If you have: These pieces and want to sell them individually These pieces, but want to sell them in a set any information, where to buy them, then post a reply comment, send me a Personal Message or mail to: GWorksmocs@gmail.com Thanks, GWorks

Topic by GWorks   |  last reply



A piece of avitaion history for sale.

Well, quite a few pieces actually.Anybody fancy owning a piece of Concorde?The pdf catalogue is 112 pages long, and features some amazing things - windshields, landing mechanisms, bits of wings, pumps...

Topic by Kiteman   |  last reply


piece list for vertical vengance?

Im just wondering so i know if i get my moneys worth thanks

Question by coreyt   |  last reply


what is this white piece in a ds for? Answered

Hi all, recently, i had to take apart my DS lite to replace the button panel. when i got it apart, i saw that there was this white piece in the ds i took the panel from, but it wasn't in mine. unsure if it was required, i put it in mine. what is this piece for anyways? if it helps, i have a polar whit ds lite, and i believe it is a 3rd gen, judging by the fully covered wifi reciever in the base of the unit. but what is this white piece for? (its right beside the stylus slot)

Question by zack247   |  last reply


what lego pieces float? Answered

Hi i have a question are any of you good at making lego boats because i am planning to make a floating lego boat

Question by rosie feather   |  last reply


Pump for little pieces of paper

Hi, I'm going to make a display cabinet for an art project. Please see image for more info. The idea is to have a container (gray box) with ash on the back side of this cabinet, then there should be a pump (red dot) emptying this container and blowing the ash to the front true a tube (see red line) into a double glass window.  How can I create something like this? the problem is the transfering of the ash (little pieces of paper) from the back to the front.

Topic by vkranendonk   |  last reply


New Low-piece Crossbow

I was building crossbows all over the place this weekend, at one moment I had one that was twice as large as the Reaper, but I lacked pieces to make it sturdy. This started out as a low amount of pieces Reaper, but I eventually made it a small crossbow which has about 80-95% of the Reapers power. Although it has the power and probably also the distance, it doesn't have a double arrow trigger(only one arrow) and I don't think it is able to fire properly without trigger. It is however, compared to the Reaper very practical, light and easy to fire/load. Btw there are 4x3 rubberbands on it in pictures. I don't know if I am going to post this one though, maybe if its really needed :P

Topic by Wicky   |  last reply


Finally getting more pieces

I'm not exactly big on money at the moment. College student and all with limited working hours. Luckily, I have parents paying for a lot of expenses so I really only have to cover food that isn't under my meal plan and any other misc things that I want on the spot for supplies or entertainment. But I recently just got $25 online from doing surveys which I decided I'll put toward getting more pieces. I can't be bothered to buy all the pieces in one bulk, so I'll just probably be ordering big things of yellow connectors, green rods, and white rods to start. When I get more money I'll get other pieces, but those will already help me create a lot more things. Yes, I'm finally actually being bothered to get more K'nex in the 3+ years I've been K'nexing. So of course then the question is what things should I build now? There are a lot of things that I want to make just for the sake of putting my own spin on them. For example, I recently rebuilt my UMP from a lack of patience and a need to have something around the dorm room again (possibly using it in a video my friends are making with nerf guns). I was thinking I might have a go at making a personal assault rifle. That is, those weapons (can't think of the names of any examples) that people built mainly to have a lot of features, look somewhat like a real assault rifle in style though with their own design, and not built exactly to be great in function. I figured I'd use my UMP as a starting point. I actually wanted to make mine look decently realistic. So yeah, that'll be a just-for-fun weapon. Any other suggestions? I'm thinking less about new concepts and more about things I can put a personal spin on or perfect.

Topic by TheDunkis   |  last reply


Ideas Welcome- Piece limited

Hey. Yeah, haven't really been k'nexing much lately nor do I think I'll be doing it much longer. Long story short, I'm taking college classes for my last semester of high school for credits in both and yada yada so I have more and less time. More because I don't have much homework and I only have one class on Thursdays which means an entire open afternoon but less because I'm a lot more occupied on other days with other activities. But I decided to crack out the K'nex again. I need something somewhat innovative. Or maybe not innovative but just something that we don't have enough of. For example, an updated BAW was one of my ideas. The problem is that I have limited pieces. Take a look at my updated UMP, folding gun, or my BAW (red rodded stock version) for a general idea of how limited I am in pieces. So I'm obviously looking to make something compact. I was also thinking of expanding on my charging handle pin concept. Perhaps combine BAW and TBAG concepts for a shelled weapon. We still lack practical shell guns. As much of a hassle as they are compared to chamber action weapons and turrets, shells are still a perfectly reasonable (and more so, less complicated and less bulky respectively) method to get more range. But it's up to you what I build. So any requests?

Topic by TheDunkis   |  last reply


How Do You Cut Your Piece??

Hey guys, this is my first Forum topic. Now today I would like to ask y'all how do you cut your pieces? I mean, I've been trying from ages and I can not get a smooth edged cut piece. Now I have used a hacksaw as well as a plier both of which have failed to produce a smooth edge. The results can be seen below. Also I do not have any sandpaper and neither do I have any shops near my house which supply it! Can I ask you all how you cut your pieces? Answer fast. Best answer gets a cookie! Lol. 

Topic by DELETED_akshat21045   |  last reply


(SOLVED) Attaching Hardboard Together

Okay, so I want to make a box of hardboard. Problem is: how do I connect the pieces of hardboard together at right angles? I was planning to use a hammer and nails. I haven't worked with hardboard before. Please help! To clarify, my question is this: How do I connect pieces of hardboard at right angles to make a box? Thanks in advance, ~H4ZZ

Topic by __DELETED__   |  last reply


What are these parts and what are they used for? Answered

I just got a couple of old computers, and while i was taking them apart, i found these pieces. Can someone tell me what they are and what they are used for?

Question by schoonovermr   |  last reply


Universal DC to DC adapter?

Does anyone know where to purchase a universal DC to DC adapter? I'm trying to run a webcam off of a specific amount of electricity from a battery pack. 

Topic by DarrenG   |  last reply


Where is the best place online to buy k'nex pieces cheap, other than ebay? Answered

Not ebay, K? I know of several lego sites, but I havent heard of a k'nex site.

Question by Speedmite   |  last reply



Does any one know where to get cheap bundles of knex pieces online? Answered

Preferable alot of pieces and new if possible? I have tried ebay but its all used and the box sets are to expensive. Any other sites i can find knex for low prices?

Question by K-Dawg   |  last reply



a website that will let upload a photo and let you decide how many "pieces" to cut it into and save as a pdf to print,

I found a website a few years ago that would allow you to upload a single photo and let you decide how many "pieces" to cut it into and save that as a pdf for you to print, i want to use a photo of my wife and I to "cut" into about 12 8X10's and frame each one to make up the original photo 1photo cut into 12 pieces to make up a large overall photo of the original any help with this?

Question by mrbaker060705   |  last reply


Are there any stores that still carry regular k'nex?

In Canada. When I say regular, I mean no micros or bricks. Those piss me off because they're so tiny. ;[

Question by planktons1   |  last reply


Yeah, about my miter saw...

I know lots of people want me to post my miter saw, and I said I would. But I decided that I'm not going to post. It uses a lot of pieces, and only 3-4 people would be able to build it anyway. Sorry if your disappointed, but I did take pictures of it while I was taking it apart, so you'll be able to see the insides. I also included a parts list below if you're curious about how many pieces it used. :-)    Rods: 996 green-249 white-123 blue-347 yellow-96 red-34 gray-9 rigid tan-1 rigid black-1 flexi-rod (yellow rod length)-12 flexi-rod (gray rod length)-68 orange-56 Connectors: 804 dark gray-15 light gray-34 red-232 green-33 yellow-171 orange-59 white-74 blue-81 purple-179 Panels: 29 triangle mini-12 triangle small-16 square small-1 Other: 205 chain link-33 blue spacer-31 silver spacer-66 tan clip-18 metallic blue clip-15 black Y clip-5 red gear-8 small blue gear-2 orange splicer-12 battery-powered motor-1 tire-6 black snap cap-3 rubber band-3 fishing line-2 strands Total: 2,034 Here's some pictures of the saw's deconstruction and pieces.

Topic by Shadowman39   |  last reply



Wanted: Two Specific K'NEX pieces

Hi there, I'm looking for 2 specific pieces for my next K'NEX Slave I Starfighter project. The pieces are: - 2 times K'NEX Fluorescent Ball Half (http://www.knexusergroup.org.uk/acatalog/info_K90973.html), will be used as thrusters - 2 times K'NEX "mini missile launcher" (not listed as individual item), will be used as weapons for this build. Images found in attachments The Ball-half appeared in the following sets: - K'NEX Apollo-15 Lunar Lander, set number #13147 (only 1 piece) - K'NEX Saturn V Rocket, set number #15122 (two pieces) The miniature missile launcher appeared in the following sets: K'NEX Mech Warrior mini series 1 & 2: "Firefly" #11148" "Uziel" #11146 "Vulture" #11142 "Hollander II" #11152 "Thor" #11144 "Uller" #11150 If you have: These pieces and want to sell them individually These pieces, but want to sell them in a set any information, where to buy them,  then post a reply comment, send me a Personal Message or mail to: GWorksmocs@gmail.com Thanks, GWorks

Topic by GWorks 


A non piece consuming knex rifle

Can someone find me a non piece consuming knex rifle? D:

Topic by SomeAsianKid   |  last reply


SMALLEST KNEX GUN!!!! 1 PIECE!!!

I made a one piece knex gun. Pick up ANY knex peice, and throw it!!!!!! Lol this was just meant to be a joke.

Topic by Ratchet and Clank   |  last reply



What is your favourite piece in Knex?

Hi everyone, just out of interest, what is your favourite piece in knex? My favourite piece is the little black end cap and closely following is the long black rod! Did you know that the reason why the long black rod is stronger than the long grey rod? The answer is because there is carbon in it!

Topic by JM1999   |  last reply


Looking to manufacture a piece of fitness equipment

I am looking for a manufacturer to help produce a new piece of exercise equipment. A professional prototype is needed. 

Topic by Vin723   |  last reply


What are the nubs on gold knex pieces for? Answered

The half circles with the nubs.. What were they made for?

Question by Wafflicious   |  last reply