Has any one got any plans on how to make a clay pigeon launcher.i think i have every thing i need but i could use a video or something to see how the thowing arm works.Thanks for all your help.
Topic by wizz316 | last reply
Dear Instructables, I am an organic gardener and smallholder/homesteader and most of my instructables are related to these topics, however apart from 'Pets', which is OK because my birds are very friendly and tame, there is no specific category for my Instructables. I have noticed that there are many people posting poultry instructables and it would be great if they could be grouped together. I also suggest, seeing the amount of relevant posts, that there should be a category which covers, permaculture, organic (food/horticulture and agriculture) and one for homesteading. Instructables is very well served on the engineering/science/computing side but it would be great to have a balance. Best Wishes, Pavlovafowl aka Sue
Topic by Pavlovafowl | last reply
Nothing that would permanently harm the pigeons (although it is tempting), but something that would scare the bejesus out of them. Maybe a motion sensor that would swing something to scare them.... maybe it woud play a predator sound when they got too close... the possibilities are endless. Please help!
Topic by irishchaos | last reply
I was by the river today, and observed the usual gang of fat-ducks being fed bread. One lady got bit (much to her surprise and my amusement) whilst trying to hand-feed. Then the mob were spooked by something and all went for the river. I noticed a small hawk, but given that it was much smaller than the ducks I didn't see it as a threat. OK maybe the ducks took a cue from the pigeons, but I wouldn't expect a small hawk to go for a pigeon either. Opinion?
Question by lemonie | last reply
They roost on a built-in window air conditioner, so something that could fit on a flat surface, or hang about a foot or two above the ac. A simple fan or propeller device that could spin up would probably do the trick - dont want to hurt them though! They also roost on smaller surface areas on corbels - so both a small version and a larger version would be ideal - or even a modular version so you could adjust the size would be great. It would need to be able to survive outdoor elements. Tried screening them off - but then squirrels made the screened off area their home! Im a novice so I could use some help with someone designing and creating, and posting as an instructable or project.
Question | last reply
My friend got permission from a local farmer to go shooting on his land. As a result he gave me 4 wood pigeons and a recipe. I didn't take enough pictures for a full instructable so I thought I would post it here on the forums for and foodies interested. It's delicious, tastes a little of kidney but without the pissy irony taste you sometimes get. I'd recommend cooking it until it's pink inside but no longer, it's beautifully tender when still pink and gets tougher as you cook it longer. I used double the recipe below to serve 4 people. The pigeons were quite large, I plucked the feathers from the breast to clear it then cut a slit in the skin before peeling it all back. I then slit down either side of the breast bone and stuck my thumbs in to peel out the breast. A slit at the bottom and top end should allow you to pull it free. WOODPIGEON STROGANOFF breasts of 2 woodpigeon cut into long 20mm thick strips 1/2 400gm tin of chopped tomatoes 1 medium onion sliced not diced 1 red pepper sliced not diced 1 tbsp of smoked paprika 1 oz of butter 142 ml carton of sour cream A handful of chopped parsley 1 - Gently sweat the onions and pepper in the butter for 2 minutes then add the paprika and cook until onions are soft. 2 - Increase the heat and when it starts to sizzle add the pigeon strips and fry until all sides are sealed. 3 - Add the tinned tomatoes a little at a time so the pan doesn`t cool too much then add 1/2 the soured cream a little at a time. 4 - Check the pigeon strips are cooked to the doneness you like(pink for me) then throw in the parsley stir and serve with rice and a dollop of sour cream on top.
Topic by Jayefuu | last reply
I'd like a site where people can bounce ideas off each other and work on them together, like a wiki for projects. I thought Instructables was like this, but I guess not. For instance, I posted this idea as a "collaboration":https://www.instructables.com/id/Litter-disposal-for-pigeons/?comments=all#CZLFYJ4FF8XAK65But I guess collaborations are more for writing collaboratively and not collaborative design. Anyone know of anything that does fit the bill?
Topic by endolith
The video for "Ritalin" by Dancing Pigeons features some lovely slo-mo footage of a battle between a flamethrower and a fire extinguisher. Well, the battle itself isn't as intense as it sounds, really, but the footage is pretty damn cool. The footage was shot with a Vision Research Phantom, a camera I truly wish was affordable. I would be shooting everything in slo-mo. via engadget alt
Topic by fungus amungus | last reply
Hey I'm a college student trying to create a specialty extruder to aid in prototyping, possibly to be used along side a 3D printer. Attached is a CAD mockup but we're in the process of building this. The applcations are fairly broad at the moment and if you think of a cool way to use long pieces of plastic for modelling, crafts, art, whatever, please let me know. This is my kickstarter and I'm trying to get any feedback you have, thanks! https://www.kickstarter.com/projects...?ref=discovery
Topic by saudade-pigeon
I have been thinking about this for a long time: An insctructables version of pong. I would like some help with it possible positions include: -Someone to download a bunch of famous instructablers profiles (Like lemonine and fungus amungus and kiteman (probably spelled all of their names wrong)) -A Java programmer to help me make an android and/or iphone/ipad app out of it. -A couple python programmers because the main language im going to do it in is python. -Possibly graphic designers. If you have any interest leave a comment or send me a message or an owl or a pigeon or use your preferred method of communication.
Topic by octopuscabbage | last reply
Ive got the original knex big ball factory set, mixed with a couple of small sets, was just wondering if anyone can make a gun out of this kind of set? ive tried following a couple of instructables but i dont have the black & blue connectors or the blue ones that look like the grey ones, or bendy rods. im sre theres more i would need but just wanna build something to shoot pigeons with. nice and powerful doesnt matter how heavy, light, but must be powerful
Question by nathjh | last reply
You may have noticed that I mysteriously stopped posting for a couple of days. I've been camping! I came on as a last-minute substitute when another leader was unexpectedly hospitalised, and whizzed off to Gilwell 24 with a small group of our Explorer Scouts. It's an awesome event for teenage scouts - from 09:00 Saturday, to 09:00 Sunday, 24 hours of non-stop activities without the requirement of sleep. Four thousand Explorer Scouts took up the challenge, and almost all of them managed a full 24 hours of extreme Scouting. 3G Swing Archery Bushcraft Zone Bouldering Campfire Climbing (Outdoor rock and revolving wall) Craft zone Crate stacking Disco Fairground Flying Trapeze Geocaching Giant games Gilwell gauntlet Global Zone - including Shelterbox High ropes course Laser Clay Pigeon Shooting Mountain boarding Orienteering Outdoor arena Quad Bikes Outdoor Woodland Quaser Raft Racing / Boat Racing Rifle Shooting Competition Scavenger hunt Scuba Diving Slacklining Speed climbing Segways Simulators Technology zone Water rockets Assault Course Car driving Go Karts Power Boking Inflatables Fire Building Fishing Military Activity Team Speed Stacking Caving Zorbing As well crafts and other activities going on all the time (I had my first go at wood-turning at 14:00, and was soldering together an AM band radio at 22:30 (goodness me, the writing on a capacitor gets small later at night!)). Add to that a month's rain in about 20 hours, giving liquid mud on the scale of Glastonbury, it's hardly a surprise that every single Explorer fell asleep on the train home. Because my standing-in was very short notice, none of my electronics were properly charged, but I did get a few snaps of the atmosphere before my iPod completely died. I have never been so wet or so dirty on a camping trip, and I was taking it easy - it's the first time I've been forced to pack my tent away wet and muddy at the end of a camp. If you're a Scout or an Explorer, and will be over 13½ next July, why not take up the challenge yourself? If you fancy taking part, offering an activity, or otherwise getting involved in next year's event, they are already taking comments and ideas. If you're not in Scouting, and didn't realise it was so awesome (or that girls are allowed at any age), then why not think about joining? (As an aside, I'd never seen Rock-It-Ball being played before. Looks fun.)
Topic by Kiteman | last reply
Hi everyone,Sorry I didn't post on Friday, Saturday, or Sunday, but I'll make up for that now.So, Friday:I arrived at Squid Labs knowing that today was a special day. Today would be the day that construction on Proj. X would commence. Jason and I layed out the materials and began building, taking pictures every step on the way. We assembled the main component by lunch time, and installed about 66% of the other components by the end of the day. Noah helped us out a bunch, figuring out where certain components should go and how to attach others to the "mainframe."The (construction) work environment at Squid Labs is awesome! We pretty much just dragged our materials outside and started working. You really can do whatever you want, whenever you want; it's truly amazing. I'm pretty sure that Today was the day that I realized how much I'd be willing to drop out of school and just work for Instructables. I don't really think it's a great idea, but I'd certainly be happy working full-time for Instructables, no doubt about it!I really didn't do much else today, Jason and I pretty much just worked on the.... on Proj. X (Caught myself, whew!) all day!Now, onto the weekend!Friday, Billy and I decided that we would go into the city (San Francisco) via BART/Bike on Saturday. Saturday has come, and it's finally time for me to go to S.F.After Christy dropped off Billy and I (with our bikes) at the BART station, we rode BART all the way to the city. Christy also gave us 2 tickets to go to the S.F. MOMA, which was awesome. There was this one drawing that I really, really liked. Unfortunately, I can't remember the artist or the title of the work, although I'm pretty sure it's entitled, "Untitled." There was also this really odd exhibit, which was...just generally odd. Imagine a house. Now, rip all of the walls out of the house, rotate the whole structure that you ripped out equally over the X and Y axis, and then shove it through the walls of MOMA.... yeah, it was pretty damn weird. Then they guy drilled and off-center hole in a record and that was playing on a timer, so it went really fast, then slow, etc etc. In the next room, there were about 20 pictures of what we just saw... Again... just odd.Anyway, after MOMA, I decided that it would be really awesome to see the Golden Gate Bridge, so Billy and I rode our bikes down toward the piers, and we'd then take "The Embarcadero" to the bridge. So, as we were passing Pier 39, my left pedal stripped out of its socket, leaving me no way to "bike" to the Bridge. Luckily, it broke off at pier 39, which just-so-happened to be a "tourist pier." Billy and I hung out there for most of the day. During lunch we "fed" a bunch of birds; pigeons, little birds, and a really mean seagull...After we realized that we would have to walk all the way back to the BART station, we started on our journey back. Awesomely, on the way, we came upon a really tranquil-looking park and a square with a huge, awesome sculpture. The sculpture had a bunch of gigantic concrete "square tubes" that jutted out of its huge base. There was water flowing out of almost everything, and steppingstones that allowed the viewer to walk underneath the immense structure. The only two words that I could describe it with are simply awesome.We arrived back at the original BART station, Christy picked me up, we ate dinner, and went back home.Sunday:Sunday was just awesome. Mitch and Erica took me Surfing with Mike, Jason, and Jason's Sister. Although the waves were small, it was a beautiful day, and we had an awesome time. For lunch, Awesome Mike brought his mini-propane grill and we had hot-dogs on the beach. After lunch, we went back into the water to surf a bit more and then left. Surfing was a blast!Back at "home," we watched "Sunshine," a sci-fi movie about a team of scientist/astronauts on a mission to deliver a bomb into their dying sun, to create a new sun within the old. Most of the movie was actually pretty good, but I thought the ending just... sucked outright. I won't ruin it for you, but you really don't need to see the movie. During the movie, though, Christy whipped up some Rhubarb Pie! YAY!Back to work - MondayYesterday, in the morning I made the "How to Create Homepage Images" Instructable, which I suggest you check out if you want to contribute to the website's homepage. We're giving you the opportunity to make homepage images that we'll actually use on the homepage... if they're good enough ;). After, Jason and I pretty much finished up Proj. X, but we will require some time in the afternoon on Tuesday to finalize construction. This thing is going to be AWESOME!In other news, Billy and I are going to "The Googleplex" tomorrow (Tuesday) to give a small talk with Christy, which I'm really excited for. At first I didn't expect that they'd want interns to go talk to Google, but Christy and Eric explained why they want us to go. Google wants the opinions of the users. Billy and I promise to speak well of everyone, and speak on everyone's behalf. I've gotta go, we're leaving soon!Cheers,-Muffinatorp.s. I burned my PB and Banana sandwich again v_v...
Topic by T3h_Muffinator | last reply