Want me to post the sgt`s ak-47 it is very powerful.
Topic by T-man 11 years ago | last reply 11 years ago
When i click on post reply the little twirl around starts and continues for as ling as i leave it on. it never posts. i feel i have a lot to contribute with 50 years of electronic experience. i teach electronic theory to those people wanting to obtain their ham tickets. my posts are always nice. i don't get it.
Topic by kadris3 10 years ago | last reply 10 years ago
When I make an instructable, I type a big long paragraph and then hit preview. Then the preview page is blank. I hit edit again and the words are still there. When i posted my instructable the words are gone, but people are posting already so what do I do????Part of my instructable is missing
Topic by Johnny Rex 8 years ago | last reply 8 years ago
I need some binding post/banana posts (preferably something that an aligator clip can easily attach to). Does anyone know a cheap place? The cheapest were about 30 cents apiece, but shipping was like 5 dollars, if this is the cheapest then I'll buy it, just that I don't want to.
Topic by guyfrom7up 11 years ago | last reply 11 years ago
I have been having intermittent problems posting either to the forum or as a reply using either Chrome or FireFox. It seems to have gone for now, so I am not sure whether that means it MUST be on my end, or that something is not loading properly sometimes when I sign in.
Topic by Goodhart 7 years ago | last reply 7 years ago
I have been having extreme trouble posting anything (comments, forums, Instructables) for some reason instead of opening the link for the comment box, it just refreshes the page. I can't upload anything either. This isn't happening on YouTube. Any ideas what's wrong?
Topic by KentsOkay 11 years ago | last reply 11 years ago
Hi, I'm a soccer coach. I'd like to make some inexpensive posts to serve as obstacles/markers that I can use indoors. I have 5' pvc pipe, but can't seem to locate or concoct something to hold the posts upright both affordably and that aren't too wide to get in the way of the players or the soccer ball. Ideally, I'd have something that is only a few inches wide with a 3/4" hole in the center to hold my 3/4" pvc. Thus far, the best thing I can come up with are a few 2.5/5lb thick plastic weight plates where the center hole happens to be just about 3/4" wide. Those seem to quite difficult to come by though! The next closest thing I've found were either heavy steel flanges or rubber mounts specifically designed to hold plastic posts. At $8 or more/each though, I was hoping to find something a little less expensive. Anyone have any ideas?
Topic by DDallen 2 years ago | last reply 2 years ago
I was looking for an easy way to pin my instruct able to my pintrest account. When I try to pin it, the only photos that come up are the ones for the add on my instructable. Any ideas of how to get around this? It would be great to not have to write it up separately. Thanks!
Question by mybell125 7 years ago | last reply 7 years ago
Hey Instructables! So a couple of weeks ago I finished a year long project, automating my room. The project is completly modular so if any piece burns out or fails you can quickly switch it, the project includes automatic lighting controlled via a PIR sensor, an LM35 controlled fan, a miniature green house controlled by another LM35 and it displays the info about humidity and temp, through a 16x2 lcd and DHT11, a combination lock for my door via a keypad, a infrared control that can turn on or of my desk lamp, alarm clock, room lights, solder station and has the function to turn the whole system on or off, it also includes a modified Sony alarm clock, that has a TDA2040 amplifier with aux in and its connected to some speakers around my room. I have all the eagle files and ready to print pdf´s. Everything is controlled by 2 DIY arduinos. I made most of the modules for the sensor array but a couple of the controll modules were made using already existing files on fritzing, and the DIY-Duino https://www.instructables.com/id/DIY-Arduino-or-The-DIY-Duino/ Should I redesign this modules and controller board before uploading, or will crediting the authors of this parts will do?
Topic by GG_Beta 5 years ago | last reply 5 years ago
Ok, im in computer class at the moment. Normally, I would be playing halo now, but some jerk uninstalled halo on all but one of the computers (that one computer has halo full), and I cant reinstall it because Microsoft has taken down the trial download, and the filters are blocking alternative download pages. So im browsing Instructables in Google Chrome now, and i was so bored, I thought I would post this forum. Lulz :-P
Topic by DJ Radio 10 years ago | last reply 10 years ago
I posted a new instructable ("Modernize a vintage heater") three days ago, and it has never shown up under the "recent" catagory, and is not found when I do a search. I can pull it up, but no one else will know it is there. ?????
Topic by knife141 8 years ago | last reply 8 years ago
That is the question. It will look something like the one pictured, and will be a combination of this, this, this, this, and many months of research. It will be cheap, under $300 easily. I want to know if I should do an 'Ible before I make it so I can take pictures. What do you think?
Topic by snowpenguin 10 years ago | last reply 5 years ago
Ok, so I posted a instructable and after 5 hours of being published, has not yet appeared in the recent section :( . This means therefore I can hardly get ANY views at all and have zero chance of being featured. Is there any way to fix this problem or will this ible I have worked very hard on go to waste? Thanks in advance Btw here is the instructable link - https://www.instructables.com/id/Knex-Table-4/
Question by hunter999 5 years ago | last reply 5 years ago
Hi! I would really appreciate some help here. My project "Motorized kite string winder! - a piece of junk that works" was posted for a couple of days. It was featured and was included in the kite contest. Now tonight when I look for it, it is not posted and is in drafts. Before, during the time I was working on it, it mysteriously posted itself without me doing anything. I edited it and re posted it, but now it's off again. I would appreciate some help in why it's doing this. It has me puzzled. Thanks!
Topic by th3_jungle_inv3ntor 5 years ago | last reply 5 years ago
I made this instructable of an F2000, but it keeps getting unposted for some reason! im not doing anything, it just does that by itself!! Help please!
Question by Seleziona 9 years ago | last reply 9 years ago
For two weeks, I have noticed published instructables counter has stuck at "300" when it should now read "302" instead. I haven't noticed any problems with functionality, but I figured I'd report it since it is a malfunction.
Topic by OrigamiAirEnforcer 4 years ago | last reply 4 years ago
My new assault rifle, seen as a slideshow, will not be posted. I have plans to make it a lot better. Currently, I rather dislike it's looks and I plan to remodel and make a new a version of it. If that version is sufficient, I will post the new version.
Topic by Raikou-san 8 years ago | last reply 8 years ago
To those other instructable members out there, i hope you can help me tell me how to let my newly posted instructable be widely viewed by others.
Topic by kola 11 years ago | last reply 10 years ago
Recently i've been having to double click on the post button to get any posts on the Q&A or Forums to post. It's like the site isn't receiving the first click. It's happening across multiple PCs in different locations (ie miles apart). I've cleared internet and java cache with no change. Before this was happening i'd post a comment and the comment would be posted and the text field would still show what i had typed.
Topic by mpilchfamily 4 years ago | last reply 4 years ago