Search for prick in Topics


Need help making a fake hypodermic syringe

Hello. I'm set to film a scene where a needle is used to inject someone. I've found a lot of places that sell and rent fake hypodermic needles, but way over my budget. Is there anyone here who would/could be interested in making one for these? I attached a video of one being demonstrated. I'm just having a mental block on how to create one myself. http://www.youtube.com/watch?v=htxmJFg-dik There's definitely a spring mechanism, and the tip is dulled. Other than that, I'm lost.

Topic by blabowski    |  last reply


What should I do to the bare light bulbs in the basement to make them pretty?

Its a very low ceiling. I have some translucent colored vellum (8.5x11). There are several bare lights. My housemates and I want to make a living area down there, there are some couches and a carpet. The walls are stone/concrete (unfinished). General decorating tips are also welcome. I was thinking about star shaped covers, or pin prick art, or something.

Question by wearingpink    |  last reply


Throat Problems - Scope Results - cause? - Diagnosis

       Some of you have probably seen my other 2 OLD forum topics, but if you haven't, I will explain it to you here. I have been having BAD throat problems for a few months now. Since I was about 9 I had food getting stuck in my throat. So one day, I was eating lunch, and food got stuck, slid down my throat and into my wind pipe. I started choking and couldn't breath. After that dramatic incident, I noticed a new symptom. I physically could not swallow. And on top of that I had an old symptom: heartburn. So I go to a doctor. He says I would have to get a scope.        So THIS is where the update begins. It was early September. I go in to get a scope. I wake up with the memory spam of a goldfish. So my family and I wait a while to go to the doctor for the results. So I go to my appointment where my doctor explains what is going on.                   ALL THE WAY DOWN my throat I have ulcers. Thus, around my ulcers they swell up, causing the difficulty swallowing         There are these things that MOST (not all) people have called esophills. I cannot find any info on these things so I will explain them to you instead of a link. These "esophills" are basically cells in your throat that react to allergies. They could swell up, itch, burn, etc. Well, mine swell up. The average person has about 5. I have 21.                      After explaining these things, my doctor says I have Eosinophilic Esophogitis (http://en.wikipedia.org/wiki/Eosinophilic_esophagitis) and says I have to get an allergy test.          Pardon my french in this paragraph....I go to see an allergist. He says to wait in the room for a few minutes until this hot girl comes in. She takes these blue pointy things and pricks me with them as liquid comes out. So she walks away, and we wait. 2 of the pricks start itching like hell. The doctor comes in, and says those two pricks are samples of corn and apples. Apples? No biggy. Corn? Damn...........why is that bad? Things that have corn that I was banned from: Soda, chips, pretzels, cereal, cereal bars, bread, and hell of a lot of other things.         So I don't eat ANYTHING with corn for about a week until the blood test results come in. About a week after the allergist appointment, he calls and says corn and apples came out negative. So I could go back to eating things with corn.        Tomorrow (10/4) I have to go get ANOTHER allergy test by taping food to my back. Hungary? Just rip the food off my back. Thanks for reading! C'ya will I go cry in a corner /sarcasm  

Topic by Flumpkins    |  last reply


How do I use static flocking on non-metallic miniatures?

For a tabletop project, I would like to add flocking to some of my bigger, furred miniatures (think giant minotaurs or the like). For this, I would like to buy a flock applicator, but I would like to know what sort of technique I should use before I start. The problem that I am seeing, however, is not having enough control on which direction the flock should go and applying them selectively on the model rather than all over and creating a kind of gradient. There's a few ways I could see this working; I buy a static flock applicator and I fix my miniature to hover above an electrostatic surface and I apply the flock from the directions that I would like the fur to go unto surfaces of glue. Another way that I could see this working is if I apply some kind of conductive layer to the miniature underneath the glue, allowing me to make the miniature itself electrostatic, without having to apply all of the fur of the entire model in one go. I'd hate to leave needle pricks through my model. Does anyone have any suggestions...?

Question by Pretender    |  last reply


Fishing the traditional way

A while ago I had a very bad day of fishing in terms of catching something for my frying pan or freezer.Same story for the old bloke sitting a few meters away from me.So we decided to pass some time with useless chats about our previous record fish we caught.While the old bloke changed bait I noticed that he did not have a hook at the end of the line.....What is that contraption and how do you catch fish with it?Old bloke laughed and said he goes hunting a lot too and always keeps the antlers from deer and such.Instead of a hook he used a round and pointy bar with a little notch slightly off the middle.Couldn't figure out how this possibly could hook a fish, so got a bigger laugh for it this time :("Make a loose fist, put it in and then pull on the line." he said and I was dumb enough to assume it would not work :(Figure it out by getting two bleeding pricks...Fish swallows the "stick" inside the bait and one there is some pull one pointy end will always get stuck.The other moves until there is no room to move anymore and the fish is spiked up for good.Only downside is that one you get a fish too big it might not grab - bad luck then LOLThis approach instead of steel hooks reminded me of the bamboo fishing poles my grandfather used to make.Be it for eel, trout, carp or even from the boat for pollock and sardine - he loved his bamboo.Even made me my fisrt fly fishing rod from a piece of bamboo :)The old guy however had more than hand made rods or horn needles as hooks.When his hands were still as good as his eyes he even made flies from these horn sticks!He explained the process to me but I never had the patience for normal flies and doing this with horn sticks and estimating how big the biggest fish might be while making sure it is neither too heavy nor fails to float...What I really liked about this otherwise wasted fishing day was the stories I got from the old man."You don't need fancy or oversensitive gear to fish, a safety pin and some packing coad do just fine if you are hungry!"Best story was how he caught a 2m gummy shark with a hand line meant to catch some sardines for bait.I could really his 3 hour struggle to get the thing on board LOLWhat are your most successfull old school or just plain weird catches with something a real sports fisherman would not even touch to cast?

Topic by Downunder35m    |  last reply


Me asking for girl advice, who wouda thought eh?

I'm not one to ask forumers for girl advice because normally everyone gives "hollywood" advice, but I'm in a jam and don't know who else to ask. I have a girlfriend, believe it or not and Christmas is coming fast. I have nothing for her and no solid ideas. I have a couple really good ideas but I can't pull them off. she asked me for a blender, she seems really serious about it but obviously I can't wake up Xmas morning and feel good about a blender....... covering my bases I got one just so she can't be pissed I didn't get her one...... but I need a main gift. Also, her birthday is on the 28th of December.....this is the first gift giving occasion I have been with her and I have 2 in a row....... infact this is the first time in a good 5 years I cared enough about a girl not to break up with her before a holiday just to avoid gift giving (ya, I know....I'm a prick) my other problem is this........ after only knowing me for about a month my birthday came along........ she went out and tracked down my most prized possession that I foolishly pawned as a teenager.......I had to pay my rent ....... i was 18 and pawning my 5 string Gibson epiphone reverse headstock bass was my only option. she found it in a different pawn shop in town and paid quite a lot of money for it.......... for a guess....... I got a little over $500 for it when I pawned it....... and pawnshops usually double or triple the price tag in there store........ my guess is she paid close to a grand for it. for Christmas she got me concert tickets, a remote control helicopter and something else I don't know about. also for valentines day she bought executive box seats for a licolin park concert (she had to tell me about the concerts so I could take the time off work....) I am not a rich man...... I make a few bucks........ but I'm not loaded........... I have no clue what to get her. some of the ideas I did have were: 1. redo her condo...... paint fix stuff up ...... kinda extreme makeover but not so extreme....... this is something I know would make her happy but I have no idea how to get her out of her condo for 2 days without her knowing whats gong on. 2. book a cruise or all expenses paid vacation........ but like I said I'm not a rich man.......so I'll have to like.....put a down payment on it and then like....... give her the receipt for x-mas and go like 6 months later........ but I don't know if thats stupid or what? the only other thing I can think of is like.......... random junk like the blender and maybe some other crap so she has a few things to open on christmas that she likes and or needs and then take her out for dinner for her B-day and give her a diamond necklace........ but I hate buying jewelry for chicks. I must get 2 separate gifts for her because in conversation she has mentioned how people give her stuff and are like happy b-day / x-mas and she hates it......she also hates b-day presents wrapped in x-mas paper. I know she'd be happy if I gave her a pack of gum from the corner store......she's not materialistic or high maintenance........ but I feel like I have to do something nice and special for her? any idea's? keeping in mind I'm not a rich man

Topic by chaoscampbell    |  last reply


Where to buy JB Weld

I tend to do a good bit of research when I purchase anything. I will spend hours finding the deal that will save me five cents. While this doesn't make much financial sense for me, maybe it will end up being worth it if you can save a few cents in the process!The only step to this instructable is a list of the best places I've found to purchase JB Weld. For those who are not familiar with JB Weld, it is, simply put, God, in a tube. It is an epoxy that when mixed (and mix quickly, you only have about 20 minutes of pliability) will set within 4-6 hours, and cure within 24. Once cured, it has the strength of steel, can bind with glass, and neatest of all, is actually conductive enough to use as solder!Note that I'm only referring to the original JB Weld, model 8265 (and 8265-S). I find the stick version doesn't adhere as well, and the "Kwick" version isn't as strong. I also tend to be stubborn and just stick with what I'm comfortable with.Since the invention of Duct Tape (genuflect) nothing has been so valuable to mankind. Thus, it's not surprising to find it anywhere from $9.99 a tube, up to $14.99 per tube. So how much should you be paying for your J.B. Weld?If ordered online, you can get it for as little as $2.95 per tube!Note: These prices are only accurate as of the posting of this instructable (29 June 2009)Okay, so if you've come this far, $2.95 per tube sounds pretty exciting. Keep in mind though that you're also going to end up dealing with shipping, so we'll see what the end result will be. When in doubt, if you have a local Ace Hardware, Lowes, Home Depot, etc. look there first. You avoid shipping, and the Ace online outlet sells it for as little as $3.25 per tube (No idea why nobody else, including Sears, KMart, Target, etc. carries it online). If you can find it in the store for that price, that would be your best bet. But assuming you don't have a local Ace Hardware, or since they're locally owned the Franchise Owner is a prick that overprices things, let's see how the following websites work out.First, it's important to note that while you will find many other places online that claim to sell the JB Weld for as little as $2.95 per tube, just try to purchase them. I'll wait... Back? So as you saw, 99.9% of these sites use the Amazon.com checkout system, and only allow ONE TUBE AT A TIME to be purchased. They then hit you with a $4.99 shipping fee for each pop, and now you're back to paying $8 per tube.On to the real suppliers:#1) Tool Explosion - The best price I've found with free shipping, but their free shipping minimum purchase is $100, and their JB Weld was only $3.76 per tube when last checked! One of the better deals out there. Between $100-$130 worth, this was the best deal I could find.#2) Alexandria General Supply - To get the $2.95 price here, you have to buy in 6 packs, otherwise it's more expensive. But hey, more JB Weld can only be a good thing. They seem to have a starting-rate of $17.05 for shipping, which is nearly as much as the 6-pack of JB Weld, making them almost $6 per. However, the more you order, the price of shipping will actually start to go DOWN. At 7 cases (42 tubes), it dropped to $7.41 for shipping making it $3.12 per tube, and at 20 cases, it was only up to $8.16 for shipping, making bulk purchases very much worth it. At $131.31 for 42 tubes, this was the best deal out there, and only gets better the higher you go. They do not accept PayPal, but do accept all major credit cards.#3) Ace Hardware Outlet - Don't ask me why AceHardware.com doesn't carry it, but AceHardwareOutlet does, but I'm not going to argue. At its respectable price of $3.39 per tube, it's not a bad deal if you're buying in bulk. Unfortunately, for just a single tube to ship, you're looking at $6.39 for shipping. The shipping rates only slowly go up the more you pile on, so if you're doing some shopping for some other hardware, Ace is The Place... For Me... (Plus, they take PayPal!) For individual tubes assuming you can't find anything locally, this is the best price going. At least buy 2 or 3 tubes at a time to make the shipping worth it, though.#4) Hands-On Tools - Another site with fair shipping, and a decent price of $3.66 per tube. Not much to say about this one, except that they seem to be one of the more reputable sites selling the weld for a good price. They work with the BBB and have a good rating, accept PayPal, and give you percentage discounts the more you buy. All around a solid company.#5) Castle Wholesalers - One of my personal favorites (since they are located near me, mostly) selling the JB Weld at $3.47 per tube. However, do keep in mind that you have a $25 minimum order here. Their prices are pretty standard for shipping, so you can add about $1 per tube once you've bought the requisite $25 worth. The more you buy, the cheaper the shipping gets per tube, as well. Only Visa and Mastercard accepted.#6) College Toolbox - While their price isn't the best, it's still a fun site with some decent stuff at fair prices. At $4.11 per tube, it's not necessarily worth the purchase here unless you find enough of their gear to get the "$150 purchase gets free shipping" thing. (And they take PayPal)In closing, if needing just a tube or two, your best bet is always going to be to shop locally, and buy from a hardware store. But once you start getting into the $5 and $6 price range, there are some decent places online to pick it up (if you don't mind the wait). Always take shipping into account, and always avoid Amazon.com and their Affiliate's rip-off schemes. If you see the Amazon logo, run far and fast (or at least close the window). E-Bay is equally a rip-off, only moreso as you're starting at the $9.99 level, and then tacking shipping onto that.For the hobbyist that understands the glory that is JB Weld, drop the $130 and get enough JB Weld to last you for a long, long time. For all others, I would recommend avoiding purchasing it online unless you absolutely can't find it for a fair price in your local stores (I can't stress that enough. Shipping is the debbil.)Hope this helps someone, and if anyone finds a better price, feel free to include it in the comments and I'll add it to the list!

Topic by Javin007    |  last reply